Audio input,  Logic Pro with Lion

When I change my Audio input, I have to reboot my computer for the change to work. I am using Logic Pro with Lion on a macbook Pro. I am switching between a Mbox Mini3 and a Blue Yeti Mic. Is this normal?

What happens if you disable, then enable "software monitoring"?
I would imagine it has more to do with Avid's Core Audio drivers for the MBox.
Also, this is a personal preference:  I never have the Mac using the pro-audio interfaces, only Logic.
In Audio-Midi Setup and in System Preferences/Sound I only have "Built-In Audio" selected, my recording interface is for use with Logic only.

Similar Messages

  • My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
    This has been a fairly common problem, but in most cases it is easily cured as described above.

  • You can't use this version of the application "logic pro" with this version of os x

    After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
    'you can't use this version of the application "logic pro" with this version of os x'

    Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
    P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

  • Using Logic Pro with Reason 3.0

    I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
    When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
    From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
    I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
    Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
    Thanks in Advance.
    amerretz

    Common problem. LP doesn't rewire 'out of the box'.
    There are two ways to do this (well, more, but I'll tell you 2)
    1 (Easy Way):
    Restart Mac (Just to be sure things are sorted, not everytime)
    Launch Logic
    Launch Reason
    Arrange Window
    Choose a Channel> Pan Left
    Go to the Middle section of the Parameters on the Left
    With the Channel pop up menu, select Rewire> RWMix L
    Repeat for the Right and away you go.
    2 (More Advanced)
    Environment Window
    In the Middle section of the parameters on the Left select Create
    Name it Rewire
    Under that windows "New" pull down (Top Left), pull down to Audio Object
    In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
    Double Click the Audio Object to expand it
    Pan Left or right, or whatever you need.
    Rename if you wish
    Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
    Go to the Mixer window
    Double click the Bus you assigned, this puts it in the arrange window
    Arrange window
    Name the Bus "Rewire" or "ReDrum" or something great like that.
    Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such.

  • Is there a way to get my FCPX audio to Logic Pro?

    There was the automatic duck option but that no longer works with FCPX 10.03
    Is there a way yet for me to get my audio to Logic Pro for mixing?

    Roles are very powerful and smart. I just exported my project to Logic pro. In FCP X, select menu: modify/edit roles... select a category like dialog and in the right window, click the "+" and make some sub roles. I made one for each person in the film. You can create subs for other categories: under music, I aded thre roles named for the three music cues.
    Then in the time line, turn on "view roles" in the popup where you adjust timeline sizes. Open the info (window cmd-4), and you can assign roles in the info panel of the clip. I selected all the dialog clips for the narator and assigned them to my subrole for him - all clips assigned at once - very easy.
    Then after this tidying up, open menu: share/export media, select export audio roles as separte files, you can ad your new custom roles (at the bottom) and delete the default roles (there is a minus in the right column) then export the set of stems.
    In logic, make the project 48k, set sync to match your timecode to the proper frame rate, import your stems, drag them all to the begining and let Logic make a new track for each - YEAH Baby... now you have everything in sync, and all the tracks you like.
    There is no automation info transfered yet, but it works nicely.
    As a bonus, open the timeline index in FCPx and all your subroles now have switches to turn them on or off, or highlight them. Click on one to see evey clip in your project with that role light up. Smart stuff.
    Hopefuly, Logic will be able to open FCP X XML files soon. That would be SO nice.

  • You can't use this version of the application Logic Pro with this version of Mac OS X.

    You can't use this version of the application Logic Pro with this version of Mac OS X. why am i getting this message after upgrading to lion

    <Bump>
    See this thread.
    https://discussions.apple.com/message/15700842#15700842
    and this one.
    https://discussions.apple.com/message/15700505#15700505
    pancenter-

  • How do I get Mac Pro with Lion Server to restart at a set time when users are connected?

    I have recently configured a Mac Pro with Lion Server, and have set it to restart automatically every morning at 3am. When I arrive in the morning, I notice that it has not rebooted, usually because it states there are users connected. Is there a way to automatically disconnect users so that the machine will reboot.  No one is ACTIVELY connected at this time of the morning, but may still be logged in somewhere. I did see where I can log out users after a set period of time when using Workgroup Manager to manage a computer or computer group, but I don't use the server to manage all of the computers that have users log in.
    Thanks!

    Well, it doesn't necessarily have to be each and every night, but it was for the sole purpose of preventing sluggishness. We had it set up before, as Snow Leopard Server and it would restart every night. It would occasionally be slow and need rebooting, however a manual reboot was not possible by most people in the store as they did not have credentials to screen share and restart it - which would result in holding down the power button to shut it down.
    The server is used for the sole purpose of logging in about 50 users just so they can customize their experience, as well as saving items to their own home folders.  The store is closed during the night, and there is no reason anyone would be accessing it during the night.

  • I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

    I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

    Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
    If you want it on both machines, you will need to likely buy another license.
    Most developers are fine with transfering license between machines, you have to contact them.
    They just want to make sure it's only on one machine so they are not getting robbed.

  • I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

    I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

    NicholasLiban -
       When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process.  This provides a complete install of the very latest version of Lion, including the recovery partition.  The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple. 
       - Randy

  • How do I save documents from my Mac Book Pro with Lion 10.7 to my IPAD 1 with the proper iOS device downloaded

    I want to know how to save a document that I have made on my mac book pro with Lion 10.7 to my ipad 1 with ios 5.1

    Welcome to the Apple community.
    iWork documents created on your Mac can be uploaded to iCloud.com, for sharing with your iOS devices.

  • How do I reset MacBook pro with lion back to factory settings without disk?

    Good evening everyone,
    I recently purchased a MacBook pro with lion installed and I need to reset it to factory settings without a disk. anyone know how to do this?

    Restart it... and hold down command+R
    then choose disk utility and format your disk
    then choose reinstall lion
    and it's back to default.
    source of info: http://www.maclife.com/article/howtos/how_boot_lion%E2%80%99s_recovery_mode
    apple way is most slam.
    how u like me now?
    i just did this right now and my system so so fresh and pure.

  • HT201364 I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either

    I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?

    Download the iPhoto upgrade from the App Store. It should be free.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • How can i get my nikon software to work on my new mac book pro with lion

    i had nikon software (capture nx2 and view nx) on my old imac that ran leopard
    i cannot get my nikon software to install on my new mac book pro with lion
    can anyone help me get my software installed
    i need this software to work immediately because without it i am unable to work that is the programs on how i process my photographs and without it i cannot make any money
    thank you

    That seems to be supported only up through 10.5.7 and probably needs Rosetta for it to run.
    Rosetta is not included in 10.7.
    If this is the case, you may need to partition your hard drive, install Windows on it, and use that partition for your work.

  • FaceTime can't be installed on "Macintosh HD" because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion

    FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.

    FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.

  • New Mac Pro with Lion and can't install FCP.

    I got a new Mac Pro with Lion and can't install FCP that worked fine in SL.  Is it not compatible?  Is it really a PowerPC program???  I'm a videographer and rely on this software and to spend $300 to continue to use it after spending a lot more for this software 4 years ago!  Tell me this is not the case and there is a solution to installing FCP.

    How to run FCP 6 (FCS 2) under Lion.
    The installer for FCP 6 (FCS 2) is a PPC app. The Programs themselves are Intel. If your trying to install FCP 6 (FCS 2) this work-around will work...
    First you need to install Rosetta from your Snow Leopard OS installation disc:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html
    After doing that you can install FCP 6 (FCS 2). Remember, after installing FCP 6 (FCS 2) you need to apply the updates. This has been discuss many times in the Final Cut Studio forum.
    If your trying to install FCP version 5.1 (FCS 1) (a PPC app) and below your out of luck....
    If you need further help, here is the URL for the  Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
    R

Maybe you are looking for