Audio not changed back in FCP 5.14

I have a simple timeline of two clips of video with a single audio track (shots of a field of wheat in the wind with the audio track of one of the shots beneath both) that I'd like to remove some of the wind noise using Soundtrack Pro.
I make the changes in STP and save. Back in FCP the name of the audio track has changed but the audio is still the original.
In FCP I select Send To > Soundtrack Pro Audio File Project
save it.
STP opens and I do what I got to do there and then SAVE.
No changes.
Any ideas?

Yes. I tell FCP to send the file and I save it. STP opens that file automatically and after I make changes to the audio file in STP I save it.
When I go back to FCP the name of the audio track has changed with the (sent) added but the audio is unchanged.

Similar Messages

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

HT1689 My iphone is frozen after trying to upload ios5.0 my i phone does not change back to normal format it shows a Cd disc with a music note and the it is plugged into the port .. how do i get my phone back

I tried to sync and upload the iOS 5.0 version to my iphone 4 all was well it was processing then it just stopped and Now my actual I phone is frozen. I have turned it off. I have rebooted it several times the I phone itself shows a CD with a music not over it and under it in small letters iTunes with an arrow pointing up wards and a picture of the small end cable on the screen . it will not move change unlock it is frozen into that position.. how do i get the useage of my phone back this is rather daunting wehn all i was trying to do was up load the most recent version upgrade of iOS.. Please help any suggestions thanks

THe phone is NOT jail broken.. all i want to do is have it return back to how it was before i started the updae version process obviously it did not take and now it is locked into plave the screen will not change.. after reboots and shut down when i turn it back on the same screeen appears the cd disc with the music note over it and the arrow pointing upwards and a picture of the small end of the charge cord that fits into the actual compute.. The phoen is not jail broken all i want is to get my phone back so i can use it i logged into i tunes and there is no where on the page that gives direction to return it back to its original format prior to trying to up grade .. whe at do i need to do to unlock the frozen compent and reutrn it back to its normal point prior to trying the upgrade

Screen resolution does not change back after using a projector

Hi!
My office uses several different models of macbooks, but there is a small problem with all the Airs. When I have been using them with a projector I have to change back the screen resolution manually (go to the system settings and change resolution). On the macbook pros, however, the desktop restores themselves as soon as the projector is disconnected. It seems to me that this should be the standard behaviour of all macs, does anyone know why it is not working on the Airs?
Best regards
Erik

Hi Erik,
I had this problem on a MacBook and resolved it by recreating some plist files.
~/Library/Preferences/ByHost/com.apple.windowserver.xxxxxxxxxxxx.plist
~/Library/Preferences/ByHost/com.apple.preference.displays.xxxxxxxxx.plist
The xxxx's are your machine's EthernetID (MAC Address). I wouldn't delete, rather just move them to your Desktop and restart the computer. See if that resolves it.

Can't get geometry changes back to FCP

When I change geometry in FCP (like scaling or cropping) it's carried over to Color. But when I change anything in the "Geometry Room", it doesn't show in FCP. I know that such things are not rendered by Color, but the manual states that FCP should take care of it.
TIA,
Uli

Thank you, but that's not what the manual states, so I'd consider it a bug.
In an environment where you're working with other people and the director considers a change in geometry appropriate while sitting with the colorist, it would be nice to carry that over to FCP. Yes, I can always take notes, but that's not what I'd call integration...
Regards,
Uli

Cursor does not change back to default after resize

Hi all,
I have a modal decorated JDialog, in normal situation, i put the cursor on the border, the curosr will change to resize cursor, so i drag it and the dialog is resized, after resized, the cursor should change back to default cursor when i enter the dialog again, but i found that somotimes after several resizes, the cursor fail to change back to default and remain as the resize cursor.

Hi
I think there is nothing so strange to cause the problem so I did not put it before, but if someone can help me I will be thankful.
public class TestFrame extends JPanel
     private static TestFrame testFrame;
     private JFrame frame;
     public static void main(String args[])
          JDialog.setDefaultLookAndFeelDecorated(true);
          testFrame = new TestFrame();
          testFrame.mainImplementation();
     private void mainImplementation()
          JButton jButton = new JButton("Show dialog");
          jButton.addActionListener(new ButtonActionListener());
          add(jButton);
          frame = new JFrame();
          frame.setContentPane(this);
          frame.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
          WindowListener l = new WindowAdapter()
               public void windowClosing(WindowEvent e)
                    System.exit(0);
          frame.addWindowListener(l);
          frame.setBounds(0, 0, 500, 500);
          frame.setTitle("Test");
          frame.show();
     class ButtonActionListener implements ActionListener
          public void actionPerformed(ActionEvent e)
               MyDialog jDialog = new MyDialog(frame);
               jDialog.setVisible(true);
     class MyDialog extends JDialog
          public MyDialog(Frame owner)
               super(owner);
               setModal(true);
               getRootPane().setWindowDecorationStyle(JRootPane.FRAME);
               JLabel label1 = new JLabel("Label1");
               JTextField textField1 = new JTextField();
               textField1.setEnabled(false);
               textField1.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JLabel label2 = new JLabel("Label2");
               JTextField textField2 = new JTextField();
               textField2.setEnabled(false);
               textField2.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JLabel label3 = new JLabel("Label3");
               JTextField textField3 = new JTextField();
               textField3.setEnabled(false);
               textField3.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JPanel panel = new JPanel(new GridLayout(3, 2));
               panel.add(label1);
               panel.add(textField1);
               panel.add(label2);
               panel.add(textField2);
               panel.add(label3);
               panel.add(textField3);
               getContentPane().add(panel);
               pack();
}

.mpg audio not playing back...

Hi Folks! Got a little challenge for ya'll...
PPC 2.0 Dual Core with leopard. & QTpro 7.6.9
Mac Book 2.16 intel dual core running Tiger & QTpro 7.6.4
Both units have IDENTICAL FCP Studio 2 6.06. The compressor set ups/exports are exactly the same.
The only variable.... intel on tiger, and PPC on leopard.. MPG plays fine on intel with tiger, but not on PPC with leopard...
I used to be able to hear my mpg files on the ppc prior to leopard... and I did not upgrade my QT when intalling Leopard. Is this a variable anyone else has found? IS there an issue with Leopard or is this only a QT issue... I can't find a QT 7.6.9 upgrade to match these QT items to test this in stages... i also lost the use of Photoshop 7 with Leopard. This leads me to question if Leopard could be causing this audio issue as well. Just an assumption... As my Photoshop 7 works fine on Intel with Tiger as well... Clear as mud now?
When I export mpg clips in Compressor they do not show or play audio on the PPC with Leopard. I transfer them to the Intel with Tiger and they play fine... They also play back fine on my stations Ultra Nexxus playback system... Craziness abounds here... Has anyone regained their mpg and photoshop 7 with Lion? Just asking....
Any suggestions I'm not seeing? Thanks tons in advance...
Joe Stanfill
MJR VIdeo Productions

What sort of MPEG files -1,2,3 or 4? Audio or video files?
Photoshop 7 is old. Photoshop 8 (CS1) works fine on Leopard.
Photoshop 7 is entirely PPC code and will not run on Lion under any circumstances.
There's no such thing as QuckTime 7.6.9 -at least not publicly.
7.6.6 is the latest version and Tiger doesn't qualify for it.

I have $0.36 left from a US gift card and can not change back to my home country's region until I spend it. How can I spend 36 cents?

I recieved a US iTunes gift card for christmas and could not use it with my Canadian account, so I changed the region to US in order to use the points. Now I've used up everything I can except the $0.36, and I'd like to enter my Canadian address and credit card back in, but it won't let me until I use up the US amount. What can I do? I'm trying to spend my money in the apple store!

Click here and request assistance.
(77983)

Recorded Audio Not playing back in Premiere Pro

I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still new to all of this. Any suggestions?

Hi AkaDc,
Though it was made for Premiere Pro CS6, this video tutorial should assist you:
Hope it helps.
Thanks,
Kevin

Mpeg audio not playing back correctly

I just upgraded to CS6 and am doing my first project in it.
I have a Sony HVR-Z1U camera which i recorded HDV to and have captured this into PPro using HDV capture settings
Here is the result of the capture
File Path: V:\HC2012\Show\Untitled Clip 04.mpeg
Type: MPEG Movie
File Size: 9.5 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:51:54:21
Pixel Aspect Ratio: 1.3333
When i try and play back the clip in CS6, the video comes out ok but the audio sounds like a chirp.
If i right clip the clip and say to edit in Audition, it sounds fine
If i play the file back from Explorer in Windows Media play it looks and sounds fine
If i import the same file into CS5.5 it plays both video and audio fine.
What am i doing wrong here?

Try clearing your media cache files and see if that fixes the issue. You can do so by going up top inside premiere and going to "edit>prefrences>media then click where it says "clean" under media cache datebase. This might fix the problem.

Motion cursor changing to hand and not changing back.

Weird.
It'll happen usually after I change some text in the text window and click back to the timeline, and it's happened after I save with the hotkeys.
Closing the program and restarting helps for a little while. Seems kinda random as far as how often and after how much time.
Any idea what's doing this?

Without upgrading, the quick workaround is to click outside the canvas, then press space.
Patrick

Adobe Printer Preferences do not change - Back to default

We have Acrobat 8.1 installed on an XP and 2003 Server station. The printer preferences were changed to print to pdf without prompting for a file name, delete logs, etc. We we open an application like notepad and print to the PDF printer all the printer preferences are applied. However, when an application like MSF (Microsoft Shared Fax) uses the printer to print faxes to pdf, the pdf used the default Adobe printer preferences instead of the preferences set on the PDF Printer. This locks up the computer because the PDF Printer prompts for a file name and location, but the prompt window is suppressed, and therefore the machine locks up with no posibility of removing the print job from the spooler.
How can I force Microsoft Shared Fax to use the preferences set in the PDF Printer, instead of it using the defaul values. Where in the registry is this located?
Thanks
Cath

I will not address the server issue, though you need to have proper license for this use (not the standard out-of-the-box license). As far as the settings, you should set them in the Adobe PDF printer properties. They may fail across a network connection. Network issues have long been problems for some folks using Acrobat.

I did an update on my macbook pro yesterday now the sites i visit won't change back to the origanal color after i cleared the history

i did a software update on my mackbook pro yesterday, now when I clear the history the color of sites I have visited will not change back to the original color any suggestions, in the past when I cleared the history sites i visited went from pinkish back to blue

So this is a Safari issue?
https://discussions.apple.com/community/mac_os/safari

Why are my browser pages white. and why can't I change back to the theme I had before ?

I can't get my yahoo page or any other to change back to the theme I had for a background and it seems that all my web sites have a white theme and it will not change back. any page or web site that I go to is white, strange. Anyone know what is going on.

It could be the work of one of your add-ons, or even add / mal-ware.
Look thru your add-ons list and make sure you know what each one is
and what it does. Also, check the programs that are on your computer
'''Windows:''' Start > Control Panel > Uninstall Programs.
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Go thru the list. If you find something that you don't
know what it is, use a web search.
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''' {web link}

Cookie permissions change back to allow every time Firefox is started

OK, here's the deal. Recently I noticed that cookies were being allowed despite having them disallowed. After messing around I discovered that despite having cookies unchecked, every time I launch FF, the cookies automatically become enabled (both accept cookies & cookies from 3rd party sites is checked). I removed Cookie Monster & the same thing happened. I already deleted the prefs.js file and this did no good. At the time, I have Toggle Cookies installed, which I have to click every time FF launches. When launched, It starts out as denied, and then it changes to allowed. Once I click the icon & set it to deny, then the check marks in the boxes go away. So, why are cookie settings automatically being set to allow each time I launch FF?
I wonder if DoNotTrack had something to do with this? I have removed it from FF. I also have Ghostery, but up until a week ago, Ghostery & Cookie Monster played well together.
Anyone have any ideas? Has the browser been infected with something? Also noted today, launching FF in safe mode shows that the settings for the cookies do not change back to allowed. Apparently something running in regular mode is causing the problem. Other plug ins present on the browser are: NoScript, Foxy Proxy, AdBlock plus, Quick Java, & Norton toolbar.

Do not use "Clear Recent History" to clear the "Cookies" and the "Site Preferences"
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
*http://kb.mozillazine.org/Cookies

Audio not changed back in FCP 5.14

Similar Messages

Maybe you are looking for