Audio not working in Photo Booth, video works fine

When I record video in Photo Booth the video works fine, the audio does not work. I have looked through other forums and tried what they have suggested but nothing is working. I sware it worked once but now I can't figure it out.

Lance Mcvickar wrote:
I have listed it with google and you would think with the .com we would come in first in a search but we are slowly going further and further back in the listings and never made it to the top. Any insight as to why that might be.
Lance ~ It could be because iWeb websites are not made to be search engine friendly. See this article:
_SEO For iWeb: How to get your iWeb Websites into Google & Other Major Search Engines_
By the way, a tip... Instead of posting your site's URL like this:
www.thehorseyourodeinon.com
...include the prefix like this:
http://www.thehorseyourodeinon.com
...then it will be easily clickable in your post. And before posting, you can switch from Compose mode to Preview mode to verify that the hyperlink actually goes to your site when clicked.

Similar Messages

Picture and audio not matching in Photo Booth

Hi, can anyone tell me why when I record a video using Photo Booth the audio doesn't match up to the picture? I recently recorded a video and when I went back to watch it I noticed that the video starts and then like 30 seconds later the sound starts. I tried to make another one and it was better but still off, the second one was only off by a few seconds. Is there a reason why this is happening and is there a way to fix it? Thanks for your time.

I have the same issue. Seems if the video is short, like 10-20 seconds the sound and video sync. But, if it's longer than that, then the sound is off and gets worse the longer the video. This is imbarrising since I have no other means and need to send a video to my professor.

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

Sound/audio not work

sound/audio not work
Model- Compaq M2000.
S/N; CNF550117L,
P/N-EE462Pa#UUF
M2235

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

In Photoshop CC timeline, when I add an audio track photoshop CC either quits working or it skips to the end of the video clip. If I just put in audio it works fine. If I just put in clips or pics it works fine, but now when audio is added

When I try to use the timeline portion of photoshop, I can't get the audio to work with my clips. I can get audio to work fine when using just audio, but the minute I try to add audio to a set of clips either photoshop quits working or it skips to the last clip in my show. I don't understand why this happens. I am using the same track each time. Very frustrating.

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

Iam using o player... Ac3 dts audio not working msg showing

Settings > General > Reset > Reset Network Settings
Contact the carrier.

Windows 8.1 beats audio not working

Product name: HP ENVY TouchSmart Sleekbook 4
after update windows 8.1 beats audio not working
This question was solved.
View Solution.

Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
Let me know if this helps ...
DOWNLOAD LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

Laptop left Speaker audio not working

Sir,
I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
Kindly do the needful

Hey @KKVK ,
Welcome to the HP Forums!
I understand your left speaker is not working on your dv5 notebook.
If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

Hi,
Check to see that external video is turned on.
View > External Video > All Frames. and
View > Video Playback > Apple Firewire PAL/NTSC.
Sandeep

ALL flash audio not working with G930 headset unless audio jack plugged in once and activated

Problem: Inexplicably and sporadically, ALL flash audio is mute in FF when using a wireless G930 headset connected to USB dongle (physically or wireless), but everything plays fine in Chrome and Explorer. I'm here to tell you what worked for the sake of others, and to make the FF team aware of a problem worth their attention.
Statement: Everything is up to date. FF, extensions, Flash, Java, Windows. I uninstalled flash on FF and my machine and reinstalled on both. My headset audio device is correctly activated in WIndows Audio Devices - all other devices are deactivated.
My current solution: I learned from a prior FF issue involving YouTube videos that YT has something called DASH playback, requiring you to plug in an audio cable to your machine, or the video won't play (WTF right?). An extension called "YouTube Center" fixes this by allowing you to turn off DASH playback. After plugging in a set of earphones into my computer's audio jack, I activated the audio device on the machine, and got audio through the earphones and headset. I then disconnected the earphones, and disabled the audio jack. Audio now works fine on the headset, and I've rebooted the machine, turned the audio jack back on, rebooted firefox multiple times to make sure. Currently, things are fine, but I'm reluctant to plug anything back into the jack.
For some strange reason, FF seems to have trouble recognizing my G930 headset as a valid audio device, or that's my guess. The fact that everything is peachy in other browsers should narrow down the culprit.
Hopefully this helps someone else, and we can find out what the core bug is to make things right.
Ask any questions if you have them and I'll try to get back.

Very nice work.

External iSight not recognized by Photo Booth, MBP, lid closed

When there is an external iSight and an external screen is attached to my MacBook Pro (where the lid is closed), Photo Booth does not seem to recognize it. I can use the camera with iChat, though.
Any ideas for a trick to make it work?

Hello Rainer Joswig
I do not believe that Photo Booth allow you to do what you want.
See this recent post: http://discussions.apple.com/thread.jspa?messageID=6967961&#6967961
We are still waiting to see whether any MacBook Pro users can offer a solution or workaround.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

MACBOOK AIR Camera is not detected in Photo Booth or FaceTime

MACBOOK AIR: Camera is not detected in Photo Booth or FaceTime. It did work for a short period and now it is not detected.

Hi there,
There are a couple of things that we can try. A good first troubleshooting for a varity of issues is resetting your computers PRAM.
OS X Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH4405
If your issues persist, then ther eare some troubleshooting steps found in the article below.
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Hope that helps,
Griff W.

My Nokia 5230 has not showing the Photos and video...

My Nokia 5230 has not showing the Photos and videos(from Memory Card) in gallery. and Music library has not updating. Please send me the solution.

It has been released 3.3 version of NS which is working fine with Thunderbird
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

HT201269 why can I not get my photos and videos stored on my iphone to import to my new Ipad Air?

Why can I not get my photos and videos stored on my iPhone to import onto my new iPad Air ?

We don't know how to answer because we don't know what you are doing.
I can tell you that you cannot connect the two devices together to transfer content. And videos do not work in Photo Stream, but it does work for photos. However, you can only stream photos to the device after you have enabled photo stream on the iPad. Any photos that were already on the phone - before you turned on Photo Stream -will not sync to the iPad.
Look at this app for the videos.
Wireless Transfer App - Share, sync & backup photos, pictures ...

Audio not working in Photo Booth, video works fine

Similar Messages

Maybe you are looking for