Audio shot in separate channels is now combined ????

Hello. I've searched this forum and haven't found an answer to this issue ... yet. I recently shot something on an XDCAM PMW-EX3. I used two mics, separating each into its own channel so that I could mix later. Upon import, I have two channels, but both say L R on them, and both appear to have exactly the same sound, mixed together. In fact, when I mute one of them, I still get the exact same sound through my headphones, only not as loud because I've muted one.
What I want is to have one channel be L and the other R, and for the sounds to reflect what was actually captured in the mic, instead of being all smeared together. So far, I haven't been able to resolve this issue on help or by searching here, though I freely admit that I might have misseed something.
Can anyone help?
Thanks

Maybe someone with your camera can comment; doesn't make sense to me.
I wonder about whether your mikes are separated. Test this: put one of your regular clips (i.e. a stereo track that should have one mike on L channel and one on R) and use audio mixer to mute one channel.
Or if your master is stereo, you've got to decide how you want the 4 mono tracks to mix. Mute 3 and see if the one left is clean.

Similar Messages

How can I capture Skype audio on a separate channel

I do interviews via skype. I currently use an external mic and USB mixing board and record with Audition CS6. But I want to record the caller's audio on a separate channel. How can I do that? Seems like there should be a way.

Back in the mists of time I did a document about this. It refers to earlier versions of Audition, but that doesn't matter because this is controlled externally from it anyway. It's not the most brilliant document in the world (the diagram is hand-drawn), but you should be able to figure out the basics:
Recording Skype calls with Audition

Macbook - tv, audio & video on separate channels?!

so i'm on a quest to watch movies that are stored on my macbook's hard drive on my 36" insignia hdtv.
i have separate connections for the video and audio. the video is connected through hdmi, and the audio cord connects my headphone jack to a red/white thing on the tv. i also have a dvd player, videogames, etc plugged into the tv. when i use a component (like the dvd player or macbook) i have to select an individual input (such as hdmi1, hdmi2, component1, etc).
the issue? when streaming the movie on the macbook, the video shows on input "hdmi2" with no sound, and the sound can be heard on "component2" with a black screen. i can only select one input at a time.
what am i missing? how can i use see both audio & video on one channel if they are in separate inputs??
thanks!

My mistake about my TV, it only has TOS link output. But I do have 2 DVRs, the TV, and a DVD+R connected to a RS passive 4-way selector and fed into a DVD speaker system for better sound when I feel like it. TOS link is an fiber-optic cable with small connectors. I have not tested my MacBook but supposedly the sound jack is also the optical output jack and there a reports of red glows from it. Normally TOS links screw on to something with the fiber in a metal cylinder that could go into the jack. Probably something in the manual--yes, it's labeled "Headphone out/optical digital audio out port" on pp. 22-23 but has no real info. I don't have/want any videos to test the Book output, today.
-Ken

Why does compressor settings of aac audio, stereo, create 2 channel mono from 2 discrete audio channel movies?

Why does compressor settings of aac audio, stereo, create 2 channel mono from 2 discrete audio channel movies?

well depending on how your audio is brought into your system you can select it as two streams of mono or a stereo pair. In reality, unless it's mixed in stereo, that's just two streams of mono locked together. Other streams brought in via other means, can have a lot more audio channels, e.g. 8, 16, 24.
In your case, with what you're doing, two separate channels works best, so you can control the levels of two very different audio sources. If, for instance, you were taking the feed from the mixing board during a concert, you might want their stereo out. Otherwise you might be dealing with the 1.2 zillion channels that they're mixing live.
I like separating the tracks coming in. I work with people who prefer to lock them together. Locking means the tracks move together during editing. Ok, fine, but I'm usually dealing with different audio sources, like you are: a camera mic (safety on location) and a close mic (shotgun, lav). Or I have a shotgun source and a lav. I want to determine the best source audio for the shot. Sometimes it's a lav, sometimes a different feed from somewhere else, sometimes the shotgun, and sometimes a mix of two sources. But if they're locked together and pre-set to come out evenly from both speakers there no way for me to make a determination. The other guys like to cut and figure out the audio later.
To each his or her own. . .

Premiere capturing same audio in two separate tracks

My sequence capture settings (using a Xena LS capture card) are for two audio channels.
Right now I'm recording only with one microphone and have only one track of audio.
But when I'm capturing that single track of audio, it's showing up on both of the audio tracks in the timeline (same audio on two separate tracks).
Is there a setting to change that?
I have the basic settings for two audio tracks just for when I use two mics on separate camera inputs.
But when I record only one track, I would expect it to show-up on only one track in the timeline.
Could this be purely a Xena issue, or is it the interface between PP and Xena?
Thanks!

Thanks! I haven't used Premiere for about five years, but I remember that it's the way I used to do it.
Same with the Velocity system I used inbetween.
The Xena CS4 plugins just came out, so I'm going to contact them about this issue.
I'll leave this thread open in case someone has the same problem and wants to post it.

When I press 'Low Latency' button I only have audio coming through left channel ?!

When I press 'Low Latency' button I only have audio coming through left channel !?
When you take it off 'Low Latency' mode the audio is fine and comes out Right and Left speaker.
Can anyone please advise why this happening and how I can fix it ?

I think Pancenter is trying to get you to read and understand the "Working in Low Latency" section of the manual as the results or problems with working in Low Latency mode are variable.
This section, for instance:
Note: The sound may change in Low Latency mode. Depending on the plug-ins in use, the changes can be anything from subtle to dramatic. If plug-ins being used do not exceed the total latency limit, there will be no audible difference.
If it was me posting about this issue I would now come back with what exactly is inserted/bussed on the tracks because it could be an accumulative problem based on what plug-ins you have active and if they are on audio tracks (stereo or mono), instrument tracks etc. Lots of variables. The section of the manual quoted above won't give specific instances as any user could be using any combination of any amount of plug-ins.
So more information is needed before anyone can help you any further.

How do I export detached audio files as separate files, for Pro Tools processing?

My project is a live band performance. I have every song as a separate Event with associated audio. I have detachd all the audio from all the video Events. I now want to Export the audio files to Pro Tools for editing, then Import the edited audio back into FCP X and snap the edited audio to the associated video Events.
My problem is this: FCP X keeps exporting the audio as a single large WAV file, rather than as separate WAV files. In fact, the video events are separate, and so the audio associated with the video Events are separate.
I first renamed the Role of every audio file as "Music", then did a Share --> Export Media of all "Music" audio Roles. After exporting, I found it was one large WAV file, rather than separate files of different sizes.
As a 2nd try, I created Sub-Roles for each audio clip, and named each one with a distinct Sub-Role name. I then Exported all these Sub-Roles (yes, tedious). The result was that every exported WAV file was the same size, the same as the file size in my first try. The only audio that could be heard in each file was the audio in that particular song, but FCP X still created the very large file with silence in all the rest of the file. Since the file lengths don't match the original audio fil lengths, there will be a problem when I Import the edited files back into FCP X and want to Snap them into place.
Question:
How can I export the individual detached audio clips as separate files, the length of each file equaling the length of the original audio file in FCP X?
Do I need to separate the detached audio into separate Layers visually in the Project Timeline, so they are not touching? Or does this matter?
Help!!

Michael Holmes1 wrote:
I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
No.
You need to explore Compound Clips. This workflow may or may not be of help.
Select an Event with clips in it and press Option+G to make a (blank) compound clip.
Select the Event Browser, create a new Event and call it 'Effects'.
Drag the Compound Clip into this Event.
Right-click the clip and select 'Open in Timeline'.
Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
Now open a project and select and copy one of the clips with effects etc.
Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
Andy.

Exported Audio Voiceover Only One Channel

I created a quicktime screen recording for a screencast/tutorial using QuickTime X.
Brought that clip into FCPX, added some music, a few transitions and some motion graphics/titling.
Exported to h.264 and I'm getting stereo from the music track, but the voiceover is only on one channel.
So I go to audio settings and batch change everything to Mono. I noticed that there are surround sound settings, that is, multiple audio 'tracks'.
Export and only one channel.
When I monitor in FCP X I heare the audio out of both channels.
When I export it using FCP X H.264 to quicktime: Audio Only On One Channel
Killing me.
So I I loaded the H.264 exported clip into QuickTime Pro 7
Anyway, In QT 7 I changed all the settings for audio (properties) and turned every channel that showed up to mono, saved as and the QuickTime file now plays voiceover audio on both channels. Yeah!! So it seems.
So I save as in QuickTime 7 and when I play in QuickTime 7 I get the Soundtrack/Voice over audio on two channels.
But when I open it in QuickTime X (or upload the file to YouTube/Vimeo) the voiceover only comes through on one channel. Keep in mind that the stock Music does play through both channels!

duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

Since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can't assign tracks to separate channels/MIDI instruments

I'm new to Logic, and I'm working on a song that so far consists of two tracks. In the environment, I created two separate MIDI instruments and assigned the keyboard for each instrument to a separate channel. The problem is that in the arrange window, both tracks automatically assign themselves to the same instrument. I've tried several times to reassign the instruments to their proper tracks, but when I reassign say instrument/channel 1 to track 1, it'll assign the same settings to track 2 and vice-versa. And then I'll look at the environment, and what should be instrument 2 will have been reassigned to instrument 1's settings, channel, etc.
I know there's a huge learning curve with this software (I was previously using Garageband so yeah...), so is there something I'm overlooking?

Linette,
Yes, in the Arrange you've created a duplicate track. So when you switch what it's pointing to, the other, of course, changes too. This is a common mistake for newcomers.
Try deleting the second track. Now use the create new track with next instrument command.

HT204053 The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now?

The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs. How does one decide what to sync, share and what not to? Green Jeans.

You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs.

I have 2 iPhones sharing an apple ID (mine and my partner). we have just created separate ID's now that family sharing is available. but the partner's ID wouldn't let her update apps purchased on my ID! Help Please

I have 2 iPhones sharing an apple ID (mine and my partner). we have just created separate ID's now that family sharing is available. but the partner's ID wouldn't let her update apps purchased on my ID! Help Please

This is happening to me also but only with certain apps. The message I get with the apps that won't update is "Update Unavailable with This Apple ID. This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled".

EANCOM message : Separate channel per message sub-version

Hello Experts,
I have the following scenario:
Flow 1 : ORDERS message : Dummy interface ( Sender AS2 channel ) -----> Dummy interface ( Receiver EDISeparator )
Flow 2 :                                  SI_Orders_96AEAN008 ( Sender EDISeparator adapter ) ------------>   IDOC ( Receiver IDOC )
Flow 3 :
SI_Orders_96AEAN009 ( Sender EDISeparator adapter ) ------------>   IDOC ( Receiver IDOC )
If you see, I need to configure 2 separate receiver communication channels based on message subversion to receiver 2 different messages; one CC for receiving EAN008 type of messages and one CC for receiving EAN009 type of messages. But the sender EDISeperator of type EANCOM does not have option to select the sub-version. Can you please tell how to configure 2 separate receiver channels per message sub-version.
Thanks
Saurabh

Hi Piyush,
My requirement is :
Interface 1 : EDISeparator Sender Interface ( 96A-EAN008 ) ---> Mapping 1 ---> ZCNOSE_ORDERS.ORDER05
Interface 2 : EDISeparator Sender Interface ( 96A-EAN010 ) ---> Mapping 2 ---> ZCNOSE_ORDERS.ORDER05
There are around 21 GLN's sending messages of type 96A-EAN008 and 60 GLN's sending messages of type 96A-EAN010.
As suggested by you in thread EANCOM message : Separate channel per message sub-version is that we have to use '|' as GLN separator. However since I have many GLN's, the option does not work for my scenario unless I create multiple communication channels with sets of GLN's in each communication channel.
Will you agree that if the sender EDI separator adaptor had an option to choose the messag sub-version of the EANCOM message ( EAN008 / EAN010 ), then it would have been simple for me to create 1 Communicaiton channel such that all the messages of Interface 1 would use Mapping 1 and all the messages of Interface 2 would use Mapping 2 irrespective of any sender GLN.
Thanks
Saurabh

Write to measurement file Express VI - TDMS file has separate "channels" for each data point

Im trying to write a VI to measure and record thermocouple data from an Advantech T/C DAQ. Using the "DAQNavi" express VI provided by them, connected to the Write to Measurement File express VI, I have managed to read in the data and create a TDMS file. However, when I open the TDMS file, each time step of temperature data is entered as a separate channel, instead of all of the channel data going into one tab. Obviously this is a huge problem as it creates hundreds of tabs after just a few seconds. Any thoughts as to what causes this?

Hi glibby,
How did you configure the Write to Measurement Express VI? Please select "one header only".
If you have your own timestamps to write, please merge your timestamp channel and measurement channels with "Merge Signals" before passing them to the Write to Measurement.
Best Regards,
Mavis

My Ipad 2 has tried to shot down now for 3 hours, just before I could not open Itunes and App Store but Email and other apps was working. them I tried to shot down but I have now for 3 hours black screen whit turning wheel. any I deas what too do?

My Ipad 2 has tried to shot down now for 3 hours, just before I could not open Itunes and App Store but Email and other apps was working. them I tried to shot down but I have now for now for more that 3 hours black screen whit turning wheel. any I deas what too do

See Here for
iPad Basic Troubleshooting
http://support.apple.com/kb/TS3274
Unresponsive iPad
http://support.apple.com/kb/TS3281

Audio shot in separate channels is now combined ????

Similar Messages

Maybe you are looking for