Audit log is not showing any data GRC 10 PC

Hi,
when we are trying to execute the audit logs
under reports in process controls,not showing data and getting
error like no data matching the entere selec criteria.
do we need any configuration changes required
Thanks
GRC Admin

Hello,
check the table DBTABLOG if data contains or not,if no data then maintain the parameter rec/client in RZ11 and try the same
while executing the audit log need to maintain the time frame as HH:MM not HH:MM:SS
check the below link about DBTABLOG
Change Log Monitor Enabling by Table log Activation in SAP Production Environment - Governance, Risk and Compliance - SC…
Regards
Baithi

Similar Messages

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

  • Team calendar  My trainings not showing any DATA  on Production Server

    Dear ALL,
    We are facing very critical issue on Production Server.
    We have two Id's for which Team calendar, My trainings is not showing any DATA .
    We observed that this is happening to both the users who had MSS role previously..
    now for your information we have check the following things already .
    1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
    2. The authorization. Is correct..
    3. We got help from SAP..But not solved problem.
    Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
    I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
    Let me know ASAP.

    Hi,
    All r correct in both system .............even following things i have checked .................which i got from reply from U.
    01.07.2009 - 11:29:52 UK - Reply by SAP
    Hello Pinki
    You need to check the settings in your different systems
    the #group of organizational views# MSS_LTV_EE is maintained
    for the Team Calendar and MSS_LEA_EE for the request mode.
    Check the IMG step
    Integration with Other mySAP.com Components ->
    Business Packages/Functional Packages -> Object and Data Provider
    -> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
    views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
    MSS_LEA_EE (Leave Request: Employee Selection) the two
    organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
    These organizational views are defined in IMG step #
    #define Organizational Structure views#:
    They have the following Object selections:
    MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
    MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
    MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
    MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
    Also check these
    Please use the evaluation path "ORGASS".
    To change the evaluation path kindly go to the view V_TWPC_V , look for
    the ESSDIR view and double click on the ESSDIR.
    Please check the above customisation,
    Tthe evaluation path SAP_MANG is used to determine
    the root objects. "Eval.Path for Root Objects" on the detail
    screen in the view V_TWPC_V "View Definition" for further information onthis topic).
    Also check the customisation using
    report RHSTRU00
    In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
    01 should exist. Please correct it as well
    and ensure that
    In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
    a record for the group 'ATTEND'.
    Hope this will help you.
    Best Regards,
    Siddharth Rajora
    HCM
    SAP LABS India

  • Popularity Trends not showing any data

    Hi,
    we are using SP 2013 RTM version and it is not showing any data in the usage statistics when we run the popularity trends reports. Is this a bug with SP 2013 RTM version? or am i missing something?
    Thanks
    techie

    Hi,
    Per my understanding, Popularity Trends report showing no data in your environment.
    For narrowing down the issue, I suggest you check whether the two timer jobs “Microsoft SharePoint Foundation Usage Data Import” and “Microsoft SharePoint Foundation Usage Data
    Processing” which are handling the usage report runs without issue.
    More information about how to deal with this issue for your reference:
    http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VQKMGHkfqwU
    http://snowburnt.blogspot.com/2014/12/how-to-troubleshoot-sharepoint-usage.html
    http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
    Thanks
    Patrick Liang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Tables & Index not showing any data

    Hi All,
    I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
    db02>history>tables& index not showing any data
    Regrads,
    Mnai

    Please make sure RSCOL00 running or execute it manually.
    Did you try to run the stats in DB13 ?

  • Sharepoint web analytics does not show any data

    Hello,
    We installed Sharepoint Web Analytics some days ago (separated application pool).
    Installation completed successfully.
    Search works fine and returns expected results.
    But reports still don't show any data :
    Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
    There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
    What I tried :
    connect to website using different users (admin user included)
    checked that needed services on server are started (especially analytics services)
    restart services Web Analytics Data Processing Service and
    Web Analytics Web Service
    checked that all services applications are started (WSS_UsageApplication status was
    stopped so I started it using Sharepoint 2010 Management Shell)
    checked service application associations (especially if Analytics Service Application Proxy is checked)
    manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
    manual start of incremental crawling
    restart IIS
    checked scope of data logging (especially if Enable usage data collection and
    Enable health data collection are checked)
    checked that the .usage file are generated correctly on the disk
    checked in the Logging database (WSS_UsageApplication) that the
    RequestUsage view contains data collected from the .usage files
    checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
    checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
    checked on the website side that Advanced Web Analytics feature is
    Active
    recreate web analytics application
    checked for any message in ULS logs that could help... I only noticed that error :
    The SharePoint Health Analyzer detected an error.  Drives are running out of free space.  Available drive space is less than twice the value of physical memory. Can it cause the problem ?
    All appears to work fine but I can't see any data in the reports.
    The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
    Anything else I can try ?
    Thanks.

    Yes I have granted application pool identity full control on the Web Analytics Service Application.
    I also checked that Sharepoint 2010 timer service is started.
    I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
    regularly and seems to be an exception :
    Enumerating all sites in SPWebApplication Name=SharePoint - 80.
    Site Enumeration Stack:
    at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
    at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
    at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
    at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
    Maybe it can be the cause ?
    I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space.  Available drive space is less than twice the value of physical memory." does not appear anymore.

  • File Screening Audit Report does not contain any data : report statistics is empty

    Hi ,
     I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008. 
    I am getting details of file screen audit in Event log  , But incident report file screen audit report does not contain any value.
    Getting report for each incident of file screen audit  , But it does not contain any data in report statistics.
    Data available in scheduled report of file screen audit.. not available in incident report only..
    Please assist...
    Thanks,
    Vasanth.M
    Thanks, Vasanth.M.

    Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
    technet library :
    https://technet.microsoft.com/en-us/library/cc754540.aspx
    Carlo

  • Hotsync Log does not show any information since August 2008. My Treo 755p has been syncing fine but nothing shows in the log!

    I just noticed that when I am done syncing, the Hotsync Log does not have any information about the most recent operation.  In fact the date of the last entry in the Log is August!  Anyone know why this is happening and how to fix this?
    Thanks.
    Post relates to: Treo 755p (Verizon)

    Now I know I've lost it--I'm replying to myself!  Would you smart tech people please take a look at what I found and see if it means anything.  Thanks!
    Two more clues:
    1) I was searching the Palm Knowledgebase and found out where the HotSync Log file is.  When I open the file, using Explorer, this message pops up: 'To help protect your security, Internet Explorer has restricted this web page from running scripts or ActiveX Controls that could access your computer.  Click here to...'  If I allow it to run, the screen blinks but nothing seems to change.  If I close the Log file and reopen it, it happens again.  How can I stop this from happening to the file?  Could this be the problem?
    2) The Knowledgebase Article below tells how to create a new 'fake' log file to 'fool' the HotSync Manager.  So I renamed the original log file, then created the new file as instructed.  Then I did a HotSync.  After the HotSync completed successfully, I opened the HotSync Manager and there is my new 'fake' log file that has only the words I typed into it when I created the file. Nothing in the Log about the operation at all! 
    Article ID: 38959   What does the error that ends with 'HotSync.log is missing' mean and how do I fix it?
    The HotSync Manager is very particular: if it doesn't find things exactly as it expects, it won't work. One of the things it has to find in the right place is the HotSync log, a file where the HotSync manager records everything it does. See How can the HotSync log help me to troubleshoot HotSync problems? for more information about this file.
    When you get this error, your HotSync Manager can't find the HotSync Log. This prevents you from performing a HotSync operation. Luckily, the HotSync Manager isn't too bright. Give it any file called HotSync.log and it will be happy again.
    The easiest way to give it what it expects is to create a new text document, rename it, and put it in the folder where the HotSync Manager expects to find it. Here's how:
    Launch the Windows Notepad. You can usually get to it by clicking on the Start Menu, choosing Programs, then Accessories and finally Notepad.
    Type some text. You can type anything you want, as long as there's at least one character in the Notepad document.
    From the File menu, choose Save As.
    In the Save dialog, navigate to your user folder in the Palm or Handspring folder (find your user folder).
    Name the document HotSync and click Save.
    Launch Windows Explorer. You can get to it by double clicking on My Computer or by clicking on the Start Menu, choosing Programs and then Windows Explorer.
    From the Tools menu, choose Folder Options.
    Click on the View tab.
    Uncheck the box next to Hide file extensions for known file types.
    Navigate to your user folder.
    Right-click once on the HotSync.txt document, and select "Rename" from the menu. Rename the file HotSync.log
    Attempt another HotSync operation. If you still get the "HotSync.log is missing" message, contact Handspring.
    Article ID: 38959 Article Type: Error, Troubleshooting, How To Date Created:  Sunday, December 12, 2004 9:10:17 AM Date Modified:  Friday, April 20, 2007 4:03:38 PM Relevant products:  Treo 300, Treo 180, Treo 180g, Treo 270, Visor Edge, Visor Neo, Visor Pro, Visor Platinum, Visor Prism, Visor Deluxe, Treo 90
    Post relates to: Treo 755p (Verizon)
    Post relates to: Treo 755p (Verizon)

  • LISTCUBE not showing any data with SAPKW70110

    Hi all
    we just upgraded our system from SAPKW70107 to SAPKW70110 and now do have the following problem:
    All InfoCubes containing non-cumulatives don't show any data anymore in transaction LISTCUBE.
    All the cubes did work fine before.
    What is curious is that some queries based on these cubes are working and at least showing some data (but not the correct data).
    We couldn't find anything in the notes so far..
    Anything we could do?
    Regards
    bivision

    Hi,
    You can use improvised listcube to display data. It can be created by taking help from the following link ;-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70e092a3-9d8a-2d10-6ea5-8846989ad405?QuickLink=index&overridelayout=true
    However you should raise this issue to SAP .
    Navesh
    Edited by: navsamol on Oct 11, 2011 8:17 PM

  • Event Management Datasources 0SCEM_1 ,2 ,3 not showing any data in RSA3.

    Hi Experts,
    I am trying to load SC Event Management data into BW.
    On the source system side , I did following thins, Still I'm not finding any data in RSA3. 
    a)  Use Tcode- /SAPTRX/BWGS and
    i) Set the BW upload mode to V1 u2013 Direct Delta Upload
    ii) Activate the BW upload for the extraction structures /SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH.
    iii) You must generate the DataSources for all the extraction structures (/SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH) for which appends have been changed or created. To generate the DataSources, in the dialog structure, choose DataSources Generation for the relevant extraction structure. If you use the standard appends without modifications, you do not have to generate the DataSources.
    b) Initialize set up tables for EM upload using Tcode- /SAPTRX/BWID
    c) The three setup tables must be filled with the relevant data for the respective event handlers. This enables the initial data upload to SAP NW BI. The parameter for the BW upload has been set to u2018 u2019 for the BW Upload Rule. This indicator specifies that an initial upload is carried out. This is executed Tcode- /SAPTRX/TSC0TR.
    d) Afterwards trigger the initial loading using Tcode- /SAPTRX/BWIU.This transaction sends the BWUPLOAD event to all the event handlers selected according to the
    specified selection criteria. Note that even inactive event handlers can be selected. The system collects all the relevant data (according to the rules in the BW profile) for the selected event handlers (those for which the BWUPLOAD event has been reported) and stores the data in the three setup tables.
    e) You must check if the parameter for the BW upload is set to delta upload using Tcode- /SAPTRX/TSC0TR
    Still I'm not seeing any data in RSA3. Can any one please help me to extract the data into BW side.
    Regards
    Akki.

    Hi,
    You can below link from extraction , It may help.
    http://wiki.sdn.sap.com/wiki/display/SCM/SAPEMIntegrationwithSAPNetWeaverBI
    Regards,
    Satya

  • 11g Cube not showing any data with no Rejected records

    Hi David ,
    Strangely one of my 11g Cube is not showing data from today as it is showing all records rejected . However when I lookup Rejected records table I didn't find any records .Not sure what is happening . When I want to peep out the AWM queries from CUBE_BUILD_LOG and ran to the database in the AWM schema the records are retruning perfectly fine . I wonder same query is firing during Cube load but without any data ? My Cube build script has only LOAD and Aggregate .
    after maintain My dimensions data are looking fine but no data populated after Cube maintenance . My MV switch off across all dimensions and cubes .
    I navigate to CUBE_OPERATION_LOG and not able to comprehend about the content.
    Any advice ?
    Thanks and Regards,
    DxP

    Hi David ,
    To be very frank today is very bad day ... Please see below my observation:
    Executed below to make sure that no key values in dimension is missing but present in fact . All below query returns no row.
    select distinct owner_postn_wid from w_synm_rx_t_f
    minus
    select distinct row_wid from postn_dh
    select distinct payer_type_Wid from w_synm_rx_t_f
    minus
    select distinct row_wid from wc_ins_plan_dh
    select distinct market_wid from w_synm_rx_t_f
    minus
    select distinct row_wid from w_product_dh
    select distinct period_day_wid from w_synm_rx_t_f
    minus
    select distinct row_wid from w_daytime_D
    select distinct contact_wid from w_synm_rx_t_f
    intersect
    select distinct row_wid from w_person_d
    select distinct X_TERR_TYPE_WID from w_synm_rx_t_f
    minus
    select distinct row_wid from W_LOV_D
    ============================
    Below returns count of 0 rows : ensure no NULL present
    select count(1) from w_synm_rx_t_f where contact_wid is null;
    select count(1) from w_synm_rx_t_f where owner_postn_wid is null;
    select count(1) from w_synm_rx_t_f where payer_type_Wid is null;
    select count(1) from w_synm_rx_t_f where period_day_wid is null;
    select count(1) from w_synm_rx_t_f where X_TERR_TYPE_WID is null;
    select count(1) from w_synm_rx_t_f where market_wid is null;
    +++++++++++++++++++++++++++++++++
    Cube Build Log has below entry:
    796     0     STARTED     CLEAR VALUES     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.267000000 PM +05:30          JAVA     1          C     47141     67     0     1     
    796     0     COMPLETED     CLEAR VALUES     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.267000000 PM +05:30          JAVA     1          C     47141     67     0     2     
    796     0     STARTED     LOAD     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.283000000 PM +05:30          JAVA     1          C     47142     68     0     1     
    796     0     SQL     LOAD     MKT_SLS_CUBE     CUBE     "<SQL>
    <![CDATA[
    SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
    T16_ROW_WID ALIAS_127,
    T13_ROW_WID ALIAS_128,
    T10_ROW_WID ALIAS_129,
    T7_ROW_WID ALIAS_130,
    T4_ROW_WID ALIAS_131,
    T1_ROW_WID ALIAS_132,
    SUM(T20_MKT_TRX) ALIAS_133,
    SUM(T20_MKT_NRX) ALIAS_134
    FROM
    SELECT /*+ no_rewrite */
    T1."CONTACT_WID" T20_CONTACT_WID,
    T1."MARKET_WID" T20_MARKET_WID,
    T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
    T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
    T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
    T1."MKT_NRX" T20_MKT_NRX,
    T1."MKT_TRX" T20_MKT_TRX,
    T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
    FROM
    NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
    T20,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T16_ROW_WID
    FROM
    NN_OLAP_POC."W_DAYTIME_D" T1 )
    T16,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T13_ROW_WID
    FROM
    NN_OLAP_POC."W_PERSON_D" T1 )
    T13,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T10_ROW_WID
    FROM
    NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
    T10,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T7_ROW_WID
    FROM
    NN_OLAP_POC."W_LOV_D" T1 )
    T7,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T4_ROW_WID
    FROM
    NN_OLAP_POC."POSTN_DH" T1 )
    T4,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T1_ROW_WID
    FROM
    NN_OLAP_POC."W_PRODUCT_DH" T1 )
    T1
    WHERE
    ((T20_PERIOD_DAY_WID = T16_ROW_WID)
    AND (T16_ROW_WID = 20100101)
    AND (T20_CONTACT_WID = T13_ROW_WID)
    AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
    AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
    AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
    AND (T20_MARKET_WID = T1_ROW_WID)
    AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
    (20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
    GROUP BY
    (T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
    ORDER BY
    T1_ROW_WID ASC NULLS LAST ,
    T4_ROW_WID ASC NULLS LAST ,
    T7_ROW_WID ASC NULLS LAST ,
    T10_ROW_WID ASC NULLS LAST ,
    T13_ROW_WID ASC NULLS LAST ,
    T16_ROW_WID ASC NULLS LAST ]]>/>
    </SQL>"     NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.627000000 PM +05:30          JAVA     1     MAP1     C     47142     68     0     2     
    796     0     COMPLETED     LOAD     MKT_SLS_CUBE     CUBE     "<CubeLoad
    LOADED="0"
    REJECTED="4148617"/>"     NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.486000000 PM +05:30          JAVA     1          C     47142     68     0     3     
    796     0     STARTED     UPDATE     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.501000000 PM +05:30          JAVA     1          C     47143     69     0     1     
    796     0     COMPLETED     UPDATE     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.548000000 PM +05:30          JAVA     1          C     47143     69     0     2     
    +++++++++++++++++
    You can observer clear rejection of 4 million rows ... Ran the above query which returns my data successfully.
    Look out to CUBE_REJECTED records take the sample record and put into the above query it is returning the data fine with my measures and dimension WID's :(PLEASE SEE BELOW THE FILTERS on ROW_WID)
    =========================
    SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
    T16_ROW_WID ALIAS_127,
    T13_ROW_WID ALIAS_128,
    T10_ROW_WID ALIAS_129,
    T7_ROW_WID ALIAS_130,
    T4_ROW_WID ALIAS_131,
    T1_ROW_WID ALIAS_132,
    SUM(T20_MKT_TRX) ALIAS_133,
    SUM(T20_MKT_NRX) ALIAS_134
    FROM
    SELECT /*+ no_rewrite */
    T1."CONTACT_WID" T20_CONTACT_WID,
    T1."MARKET_WID" T20_MARKET_WID,
    T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
    T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
    T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
    T1."MKT_NRX" T20_MKT_NRX,
    T1."MKT_TRX" T20_MKT_TRX,
    T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
    FROM
    NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
    T20,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T16_ROW_WID
    FROM
    NN_OLAP_POC."W_DAYTIME_D" T1 )
    T16,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T13_ROW_WID
    FROM
    NN_OLAP_POC."W_PERSON_D" T1 )
    T13,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T10_ROW_WID
    FROM
    NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
    T10,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T7_ROW_WID
    FROM
    NN_OLAP_POC."W_LOV_D" T1 )
    T7,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T4_ROW_WID
    FROM
    NN_OLAP_POC."POSTN_DH" T1 )
    T4,
    SELECT /*+ no_rewrite */
    T1."ROW_WID" T1_ROW_WID
    FROM
    NN_OLAP_POC."W_PRODUCT_DH" T1 )
    T1
    WHERE
    ((T20_PERIOD_DAY_WID = T16_ROW_WID)
    AND (T16_ROW_WID = 20100101)
    AND (T20_CONTACT_WID = T13_ROW_WID)
    AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
    AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
    AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
    AND (T20_MARKET_WID = T1_ROW_WID)
    AND T13_ROW_WID = 255811
    AND T7_ROW_WID = 122
    AND T4_ROW_WID =3
    AND T1_ROW_WID=230
    AND T10_ROW_WID = 26
    AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
    (20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
    GROUP BY
    (T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
    ORDER BY
    T1_ROW_WID ASC NULLS LAST ,
    T4_ROW_WID ASC NULLS LAST ,
    T7_ROW_WID ASC NULLS LAST ,
    T10_ROW_WID ASC NULLS LAST ,
    T13_ROW_WID ASC NULLS LAST ,
    T16_ROW_WID ASC NULLS LAST
    =================================
    THE XML export of CUBE as below:
    <!DOCTYPE Metadata [
    <!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
    %BIND_VALUES;
    ]>
    <Metadata
    Version="1.2"
    MinimumDatabaseVersion="11.2.0.1">
    <Cube
    ETViewName="MKT_SLS_CUBE_VIEW"
    Name="MKT_SLS_CUBE">
    <Measure>
    <BaseMeasure
    SQLDataType="NUMBER"
    ETMeasureColumnName="TRX"
    Name="TRX">
    <Description
    Type="LongDescription"
    Language="AMERICAN"
    Value="TRX">
    </Description>
    <Description
    Type="ShortDescription"
    Language="AMERICAN"
    Value="TRX">
    </Description>
    <Description
    Type="Description"
    Language="AMERICAN"
    Value="TRX">
    </Description>
    </BaseMeasure>
    </Measure>
    <Measure>
    <BaseMeasure
    SQLDataType="NUMBER"
    ETMeasureColumnName="NRX"
    Name="NRX">
    <Description
    Type="LongDescription"
    Language="AMERICAN"
    Value="NRX">
    </Description>
    <Description
    Type="ShortDescription"
    Language="AMERICAN"
    Value="NRX">
    </Description>
    <Description
    Type="Description"
    Language="AMERICAN"
    Value="NRX">
    </Description>
    </BaseMeasure>
    </Measure>
    <CubeMap
    Name="MAP1"
    IsSolved="False"
    Query="W_SYNM_RX_T_F"
    WhereClause="W_DAYTIME_D.ROW_WID = 20100101">
    <MeasureMap
    Name="TRX"
    Measure="TRX"
    Expression="W_SYNM_RX_T_F.MKT_TRX">
    </MeasureMap>
    <MeasureMap
    Name="NRX"
    Measure="NRX"
    Expression="W_SYNM_RX_T_F.MKT_NRX">
    </MeasureMap>
    <CubeDimensionalityMap
    Name="TIME"
    Dimensionality="TIME"
    MappedDimension="TIME.CALENDER.MONTHLY"
    JoinCondition="W_SYNM_RX_T_F.PERIOD_DAY_WID = W_DAYTIME_D.ROW_WID"
    Expression="W_DAYTIME_D.ROW_WID">
    </CubeDimensionalityMap>
    <CubeDimensionalityMap
    Name="CUSTOMER"
    Dimensionality="CUSTOMER"
    MappedDimension="CUSTOMER.CUSTOMER_HIERARCHY.DETAIL_LEVEL"
    JoinCondition="W_SYNM_RX_T_F.CONTACT_WID = W_PERSON_D.ROW_WID"
    Expression="W_PERSON_D.ROW_WID">
    </CubeDimensionalityMap>
    <CubeDimensionalityMap
    Name="INS_PLAN_DH"
    Dimensionality="INS_PLAN_DH"
    MappedDimension="INS_PLAN_DH.INS_PLAN.DETAIL"
    JoinCondition="W_SYNM_RX_T_F.PAYER_TYPE_WID = WC_INS_PLAN_DH.ROW_WID"
    Expression="WC_INS_PLAN_DH.ROW_WID">
    </CubeDimensionalityMap>
    <CubeDimensionalityMap
    Name="LIST_OF_VALUES"
    Dimensionality="LIST_OF_VALUES"
    MappedDimension="LIST_OF_VALUES.LOV_HIERARCHY.DETAIL_LEVEL"
    JoinCondition="W_LOV_D.ROW_WID = W_SYNM_RX_T_F.X_TERR_TYPE_WID"
    Expression="W_LOV_D.ROW_WID">
    </CubeDimensionalityMap>
    <CubeDimensionalityMap
    Name="POSITIONDH"
    Dimensionality="POSITIONDH"
    MappedDimension="POSITIONDH.POST_HIER.DETAIL"
    JoinCondition="W_SYNM_RX_T_F.OWNER_POSTN_WID = POSTN_DH.ROW_WID"
    Expression="POSTN_DH.ROW_WID">
    </CubeDimensionalityMap>
    <CubeDimensionalityMap
    Name="PRODH"
    Dimensionality="PRODH"
    MappedDimension="PRODH.PRODHIER.DETAILLVL"
    JoinCondition="W_SYNM_RX_T_F.MARKET_WID = W_PRODUCT_DH.ROW_WID"
    Expression="W_PRODUCT_DH.ROW_WID">
    </CubeDimensionalityMap>
    </CubeMap>
    <Organization>
    <AWCubeOrganization
    MVOption="NONE"
    SparseType="COMPRESSED"
    MeasureStorage="SHARED"
    NullStorage="MV_READY"
    CubeStorageType="NUMBER"
    PrecomputePercent="35"
    PrecomputePercentTop="0"
    PartitionLevel="TIME.CALENDER.MONTHLY"
    AW="&AW_NAME;">
    <SparseDimension
    Name="TIME"/>
    <SparseDimension
    Name="CUSTOMER"/>
    <SparseDimension
    Name="INS_PLAN_DH"/>
    <SparseDimension
    Name="LIST_OF_VALUES"/>
    <SparseDimension
    Name="POSITIONDH"/>
    <SparseDimension
    Name="PRODH"/>
    <DefaultBuild>
    <![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
      LOAD NO SYNCH,
      SOLVE
    )]]>
    </DefaultBuild>
    </AWCubeOrganization>
    </Organization>
    <Dimensionality
    Name="TIME"
    ETKeyColumnName="TIME"
    Dimension="TIME">
    </Dimensionality>
    <Dimensionality
    Name="CUSTOMER"
    ETKeyColumnName="CUSTOMER"
    Dimension="CUSTOMER">
    </Dimensionality>
    <Dimensionality
    Name="INS_PLAN_DH"
    ETKeyColumnName="INS_PLAN_DH"
    Dimension="INS_PLAN_DH">
    </Dimensionality>
    <Dimensionality
    Name="LIST_OF_VALUES"
    ETKeyColumnName="LIST_OF_VALUES"
    Dimension="LIST_OF_VALUES">
    </Dimensionality>
    <Dimensionality
    Name="POSITIONDH"
    ETKeyColumnName="POSITIONDH"
    Dimension="POSITIONDH">
    </Dimensionality>
    <Dimensionality
    Name="PRODH"
    ETKeyColumnName="PRODH"
    Dimension="PRODH">
    </Dimensionality>
    <Description
    Type="LongDescription"
    Language="AMERICAN"
    Value="MKT SLS CUBE">
    </Description>
    <Description
    Type="ShortDescription"
    Language="AMERICAN"
    Value="MKT SLS CUBE">
    </Description>
    <Description
    Type="Description"
    Language="AMERICAN"
    Value="MKT SLS CUBE">
    </Description>
    <ConsistentSolve>
    <![CDATA[SOLVE
      SUM
        MAINTAIN COUNT
         OVER ALL
    )]]>
    </ConsistentSolve>
    </Cube>
    </Metadata>
    +++++++++++++++++++++++
    I dropped the AW and create new from exported XML and maintain all dimensions and then rebuild . Still have the issue :(
    Any thing you can hightlight from above ?
    Thanks,
    DxP
    Also I sustpect whethere it is a issue due to below error caused when I click on one of my Position_Hier view from AWM : even if I select that view it is throwing the error in SQL developer after displaying first couple of rows (while page down)
    java.sql.SQLException: ORA-33674: Data block size 63 exceeds the maximum size of 60 bytes.
    at oracle.olap.awm.util.jdbc.SQLWrapper.execute(Unknown Source)
    at oracle.olap.awm.querydialog.PagedQueryDialog$1.construct(Unknown Source)
    at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
    at java.lang.Thread.run(Thread.java:595)
    Edited by: e_**** on Aug 17, 2011 8:41 PM

  • Mail 4.5 not showing any dates other than "Today" and "Yesterday"

    All of my mail messages are dates 5-01-13 except thos that are "Yesterday" ort "today.  The settings in my System Preferences are correct and all other programs are O.K.  Only mail seems to be the problem.  Any ideas?
    Sass

    Hi there,
    I'm also having this exact problem. I have Mail 6.6 running on Macbook air 11" OS X 10.8.
    All the emails apart from today and yesterdays show the date as 05-01-2013 in the top right hand corner of the mail window scroll list, i.e. date in blue. Only when you click on a specific email to show the whole conversation/message does it then show the correct date and time in the top right hand corner of the message window. 
    Any ideas anyone?? So annoying when trying to search for emails!
    Cheers,
    Prina

  • ST03N is not showing any data

    Hi
    I am not able to see any data in ST03N, its giving me error as No system load data available.
    SAPOSCOL is running fine and SAP_COLLECTOR_FOR_PERFMONITOR job is also running for every hour.This is ECC6.0 system. Please advice me on this.
    Thanks

    Hi Amit
    please ensure below report whether running or not in st03
    It is possible that the workload collector is not schedule. To schedule the collector, choose, in Expert user mode, Collector -> Perf. Monitor Collector -> Execution Times in the left subscreen. The system displays the Contents of table TCOLL screen. Ensure that the report RSSTAT83 is scheduled hourly.
    if not running then you just execute aboue report  in se38.
    then i hope your problem is sloved.
    Regards
    Bandla

  • ST03N Not showing Any Data

    Hi,
      In my ides system when iam entering tr.code st03n iam getting error : No system load data available.
    Im getting this information on help :- Expert user mode, Collector -> Perf. Monitor Collector -> Execution Times in the left subscreen. The system displays the Contents of table TCOLL screen. Ensure that the report RSSTAT83 is scheduled hourly.but in
    my screen RSSTAT83 report is not showing.guide me for the same to resolve the issue.
    Thanku

    Hi,
    Refer to following link.
    No system load data available
    Hope this helps.
    Manoj

  • S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

    Hi Gurus,
    We do upgrade and do testing to all functional process realted.
    When open S_ALR_87012178 in SAP ECC6 no data showed, but in old version (SAP 4.6C) data showed although we select the same parameter selection.
    Any setting missed ? or any suggestion about this issue.
    Thx in advance.
    Tri Wicaksono

    Hi Tri,
    Check the following.
    I have checked your request, and there are two 'ways' the report
    will send out the data:
    1. In a 'normal' list
    If you call the report in the 'standard' way, the data get displayed
    in a normal list. This is the standard.
    2. If the 'ACCESSIBILITY_MODE' flag is set in the user parameters.
    With this flag, the reports output is done with the ALV Grid display.
    About this ACCESSIBILITY_MODE flag,  refer to the note 929036,
    which describes the 'function' of it.
    Regards,
    Fernando Evangelista

Maybe you are looking for