Audition 3.0 installer under Win7 64-bit fails with "problem while extracting files"

I'm having trouble installing Audition 3.0 on Windows 7 64-bit.
I downloaded an installer for Audition 3.0 (called ADBEAudition_WWEFGJIS.exe, 352 MB).
This installer runs but when the progress bar is at the far end, it raises a dialog saying "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder."
At this time, the main installer dialog shows 100% completed and displays the filename "...\Audition 3.0\Adobe Bridge CS3\redist\WindowsXP-KB898715-x64-enu.exe". I don't know whether this filename is related to the problem, it might just be the last file extracted.
I'm running Windows 7 64-bit on an Asus laptop with 4GB of RAM and an AMD Turion II P520 processor. I don't know whether this CPU is "SSE2-enabled" or not, as specified in the minimum system requirements.
I've rebooted the machine and the problem occurs consistently.
Thanks in advance for any suggestions.
KrisBlueNZ

Hey, I used to have a Diamond PCI card somewhere.
I would say that all bets are off with the drivers, but there is a strong possibility that you could be hearing the problems with the sample rate converter in Windows 7 (and I think in Vista). This affects recording and playback, and the first line of defence is to make sure that the source audio's sample rate is the same as the "default sample rate" that is set in every area in the Windows Control panel audio area.
The sample rate converter built into XP has a range of settings that are usually set to "high quality", and sample rate conversion is rare anyway with that OS. With Windows 7, the concept of the newer Windows mixer irequires that the sample rate converter changes all the audio on the fly to the default ample rate, but the converter is not very good. This doesn't always affect the audio - anything using DirectX seems OK, but anything using "WaveOut" audio (eg YouTube playback) is affected.
Microsoft acknowledges the problem and have issued a patch at http://support.microsoft.com/kb/2653312

Similar Messages

  • Installation 11.5.10.2 failed with creation of control file.

    The log information will be written to
         "f:\oracle\alivisdb\9.2.0\appsutil\log\ALIVIS_dba\adcrdb_ALIVIS.txt"
    ECHO is off.
    ECHO is off.
    Creating the control file for ALIVIS database ...
    ECHO is off.
    SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:14:25 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:15:08 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01031: insufficient privileges
    ORA-01031: insufficient privileges
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    ECHO is off.
    Checking for errors ...
    ECHO is off.
    The database has not been successfully created. Shutting down the instance...
    SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:15:19 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    adcrdb.cmd exiting with status 1
    "Error returned while creating control files"
    Dear All,
    Tried installing 11.5.10.2 in winxp .. all the pre-requisties met and at the second stage ,Rapidwizard got stucked with the following error :
    There was an error while running the command - f:\oracle\alivisdb\9.2.0\temp\ALIVIS_dba\adrundb.cmd APPS APPS
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running Database Install Driver for ALIVIS instance
    I've been assigned the user who has administrative privileges on the domain..
    Help out guys..
    Thanks
    Yusuf

    Please see Oracle Metalink Document Oracle Applications 11i Install Fails on Windows when Number of Processors is Greater than 12 Doc ID: Note:433203.1.
    Some extracts of the metalink document,
    To overcome this problem encountered on Windows, please execute the following steps:
    1. Right click on "My Computer" > "Advanced" tab > Click on button "Environment variables".
    2. Edit the value of NUMBER_OF_PROCESSORS from the value which is greater than 12(e.g. in this case 16) to 12. Apply the changes.
    3. Reboot the machine to ensure that the environment variable NUMBER_OF_PROCESSORS is set to the corrected value i.e.12.
    4. Clean the current install.
    5. Check the value of NUMBER_OF_PROCESSORS on the command prompt before the rapidwiz is started :
    echo %NUMBER_OF_PROCESSORS%
    6. Run rapidwiz and finish database(of the Oracle Applications) installation.
    7. Once the Oracle Applications is installed, the value of environment variable NUMBER_OF_PROCESSORS could be reset to its original value.
    Hope it helps.
    Adith

  • Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

    Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

    Hey corrafromlondon,
    Thanks for the question. After reviewing your post, it sounds like the installer file isn't working. Have you tried deleting the installer and redownloading the installer? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    How to install OS X Yosemite on your Mac - Apple Support
    you can find the Yosemite installer app in your Applications folder or Launchpad. 
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Safari v5.0.2 for Win7 (64-bit) crashes with Kraken benchmark

    my Safari v5.0.2 for Win7 (64-bit) keeps crashing whenever I try the Kraken JavaScript Benchmark http://krakenbenchmark.mozilla.com

    Thank you for your response. Yes, you are right to suggest upgrade to 10.4 of course, but I've read stories of how it is slower, especially since I only have 256 MB on my iBook G4.
    Sorry to say, but good news all the same for others in my situation, that the new browser Camino 1.6.4 is the best solution to this problem.
    I installed Camino on my 10.3.9 and it works great, faster than Safari, better features, about the same feel and functionality, and completely stable with no crashes regardless of which web site I visit, keeping Javascript enabled. (I also tried FIrefox and it crashed on the same sites as Safari.)
    So, all you users who still insist on their 10.3.9 OS, switch to Camino and experience crash-free browsing!

  • 64-bit Nightly v29 and Firefox v26 under Win7 64-bit are so slow for streaming, achieving only 4% of BW otherwise achieved by the sam firefox under Win7 32-bit.

    Under my Window 7 64-bit OS, I've installed both Nightly Build v28 and v29 to perform "internet speed test" and each time, I can only achieve something < 2 mbps for my home Wi-Fi, gateway router which is about >56 Mbps. The only working Nightly version was v23 that could achieve close to >52 mbps. But once I update v23 to higher version, all the normal high speeds I could achieve at Nightly v23 are gone. The same issue plagued also firefox v26 under Win 7 64-bit.
    For clarification, this is not true under Win 7 32-bit OS - the same firefox v26 works fine to achieve the raw BW speed close to and >56 mbps. WHy not in 64-bit OS seems to be the main question?
    What's going on? I greatly appreciate you looking into and helping me out on this dilemma. Thanks!
    Sincerely
    Shao Ma

    hello Shao Ma, when you are using speedtest.net or a similar flash-based site to measure your connection speed then it might be an issue with the protected mode that [http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html adobe has introduced] for its flash plugin for firefox. some old versions of f-secure or trusteer rapport are known to cause such slowdowns together with flash, or it might be something similar on your system that is interfering (maybe security software that is blocking/sandboxing the container used for the protected mode, etc...).
    as a workaround you could try [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] & see if this makes a difference.
    in case you'd like to troubleshoot the issue further, it would be best to contact adobe's support & file a bug report at bugbase.adobe.com (choose "Adobe Flash Player" as the product & "Browser Integration" as the product area), since they will have a better understanding of the internals of flash protected mode & therefore may know what else might be at the root of the problem you were seeing.

  • Photoshop CS5 won't run under Win7 64-bit

    Photoshop starts, but as soon as I try to open any file, including a small JPEG, I get an annoying "Photoshop is no longer responding" type Windows OS message.
    This occurs whether it's the 64 bit version or the 32 bit version
    AMD Phenom 9750 Quad Core
    4 GB ram
    Completely updated Win 7 64-bit
    500 GB SATA-II HD
    24" HP Monitor  1920x1200
    Standard USB KB and Mouse
    Video:
    º Share Memory: Maximum up to 256MB
    º On Chip ( NVIDIA GeForce 6150SE-based. 2D/3D graphic engine)
    º Integrated DirectX 9 graphics processor
    I can't see myself plunking down any money for this unless it works on my work station.
    Any ideas? This must be a legitimate problem as I have seen other similar issues on 64 bit Win7 posted.
    Thanks all!

    I'll move this thread over to the forum that serves Photoshop CS and not Photoshop.com

  • Distortion in Audition 3.0.1 and Win7 64 bit

    On board audio on my mobo took a dump, I don't like on board anyway. I added a Diamond PCI 7.1 (I am not spending $200 on a big time card, this one meets my needs). I have 2 hard drives with OS. One is XP sp3, the other Win7 sp1. I can't get ASIO working on the Win7, although it has worked on XP. Anyway, when I use the stereo mix as an input in Win7 and record, 99% of the time it comes back with distortion on the audio; this is true whether recording a stream from the web, or just testing by playing an audio file through Media Player. With XP, everything sounds fine. I have the only Win7 driver I could find for the card. Once in a while I get clean audio on Win7, but rarely. May I assume 3.0.1 isn't happy with Win7 under this circumstance? If I am forced, I can always boot to XP and use it there. Just wondering if anyone else has had similar issues. Thanks.

    Hey, I used to have a Diamond PCI card somewhere.
    I would say that all bets are off with the drivers, but there is a strong possibility that you could be hearing the problems with the sample rate converter in Windows 7 (and I think in Vista). This affects recording and playback, and the first line of defence is to make sure that the source audio's sample rate is the same as the "default sample rate" that is set in every area in the Windows Control panel audio area.
    The sample rate converter built into XP has a range of settings that are usually set to "high quality", and sample rate conversion is rare anyway with that OS. With Windows 7, the concept of the newer Windows mixer irequires that the sample rate converter changes all the audio on the fly to the default ample rate, but the converter is not very good. This doesn't always affect the audio - anything using DirectX seems OK, but anything using "WaveOut" audio (eg YouTube playback) is affected.
    Microsoft acknowledges the problem and have issued a patch at http://support.microsoft.com/kb/2653312

  • Essbase 11.1.3 installation in Win7 64 bit laptop

    Hello,
    I am planning to install Essbase in my win7 laptop. Pls let me know what are the files required? Do I need to install Oracle or SQL server separately for the RDBMS to connect to the Essbase or is it come along with Essbase installation kit? If so how to configure that?
    Regards

    For a COMPACT deployment of Essbase take a look at this document:
    http://www.oracle.com/technetwork/middleware/bi-foundation/epm-compact-deployment-11121-354669.pdf
    For a FULL deployment of all Hyperion products on a server, take a look at this document:
    http://www.oracle.com/technetwork/middleware/bi-foundation/epm-deploy-guide11121-1401625.pdf
    BTW... this is Oracle-OLAP discussion forum.
    Essbase discussion forum is at: https://forums.oracle.com/forums/category.jspa?categoryID=145
    .

  • Connecting ODBC under Win7 64 Bit

    Hi ,
    I'm under win 7 64bit , i can't define in the ODBC a database for MS Access only sql server.
    I have a MS data base which i want connect to my CVI Soft through the ODBC Any idea how can i do that ?
    Kobi Kalif
    Software Engineer
    Solved!
    Go to Solution.

    Well after some time i see the problem is working under 64 bit...
    just run the ODBC under C:\Windows\SYSWOW64\ODBC.....
    In there there are all the drivers..
    Kobi Kalif
    Software Engineer

  • Why operates Indesign extremly slow under Win7/64 bit?

    It seems that Indesign is operating from the harddirve only although I am running a fast (new) computer with 6 GB RAM. When I type a word each character takes seconds to be displayed and the harddrive is working like mad - according to the noice.

    Guymuc wrote:
    It seems that Indesign is operating from the harddirve only although I am running a fast (new) computer with 6 GB RAM. When I type a word each character takes seconds to be displayed and the harddrive is working like mad - according to the noice.
    What antivirus software ?
    robin
    www.adobescripts.co.uk

  • UIM Installation in MS (VM 2) fails as it searches for files in AS (VM 1)

    Dear Gurus,
    Scenario:
    For UIM installation, 2 Virtual Machines (VM 1 & VM 2) with no shared disk given.
    VM 1 hosts Admin Server (AS) & Manage Server (MS).
    After creation of domain, the directory structure is copied from VM 1 to VM 2.
    Ran the UIM Installer on VM 2 with intentions to install UIM on MS running on VM 1.
    Issue:
    When UIM installer tries to deploy the application on MS (target server) it fails because it cannot find those files i.e. OracleCommunications and UIM folder in VM 1 which were created in VM 2 in the process of installing UIM. It still baffles me why it is not searching for the files which were created in the current VM (VM 2) but instead looking at VM 1 which were non-existent. With the same architecture, installation of OSM works perfectly with no similar issue. Basic intention behind this architecture is to segregate the Admin tasks related to Server & UIM app.
    Do advise
    AA
    Edited by: AmosAw on Dec 2, 2012 8:48 PM

    I"m sorry you're unhappy with Sun products. Many users will have different opinions.
    Many of the issues we see often have had "technotes" published about them. However, many folk don't seem willing to look those up.
    Many folk also don't seem interested in looking at the documentation, either.
    Yes, our documentation can be confusing. Ours, and others, too.
    You always have the option of moving to other vendors, anytime you wish.
    In a direct comparison between Messaging Server and Exchange, however, our product looks pretty good. It's easier to maintain, handles far more users, at a lower cost per user, and is more stable.
    How many Exchange servers would you need (and how many administrators) to handle 500,000 users? JES Messaging Server can do that all on one box, with very few admins.

  • Oidca during installation of AS 10 R2 fails with 12705

    I'm installing AS 10.1.2.0.2 and OID configuration fails with following error:
    oracle.ldap.oidinstall.backend.OIDCAException: java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
    ORA-12705: invalid or unknown NLS parameter value specified
    at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configOID(OIDConfigWrapper.java:247)
    at oracle.ldap.oidinstall.OIDCA.doSilent(OIDCA.java:507)
    at oracle.ldap.oidinstall.OIDCA.run(OIDCA.java:818)
    at oracle.ldap.oidinstall.OIDCA.main(OIDCA.java:957)
    I hadn't set NLS_LANG the first time because it's not listed in the variables mentioned in documentation.
    Then i tried a second install after setting NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    and same error occured
    Any ideas ?

    Hello,
    I have the same problem like perezweiss
    (more - OID Configuration Assistant failes during 10gAS Release 2 (10.1.2.0.2)
    but change LANG variable does not work for me.
    export | grep LANG
    declare -x LANG="en_US"
    declare -x NLS_LANG="AMERICAN_AMERICA.WE8ISO8859P1"
    Please help !
    Thanks.

  • 'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

    I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8.  [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems: 
    First, after importing the file (.avi), I get a message about ‘dropped frames.’ 
    Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ]   I can use the shift-arrow key and see that the video is there.
    Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer.  There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux). 
    Questions:
    1.  Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

    "I think you're telling me you're using a backwards compatible Digital8  camcorder to capture your video as DV-AVIs. Is that right?" YES
    "Are you using  Premiere Elements to do this capturing?" YES, AS ABOVE PE8
    "Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
    WMP v12 is dumb. Under properties, media, it says 'video.'  However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
    So, back to the Questions:
    1.  Why doesn’t the source  monitor play the video? Is this a problem with PE8 (latest update as of 3  March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

  • 11gR2 installation on Solaris failed with prereuisite 124861-15

    The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
    When I tried to install the patch 124861-20, it failed with the following(see below):
    I have Sun Studio 12-2 installed on the system.
    It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
    Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
    Thanks.
    Zhigang
    # patchadd 124861-20
    Validating patches...
    Loading patches installed on the system...
    Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
    Done!
    Loading patches requested to install.
    Done!
    The following requested patches have packages not installed on the system
    Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
    Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
    Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
    Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
    Checking patches that you specified for installation.
    Done!
    The following requested patches will not be installed because
    the packages they patch are not installed on this system.
    0 No Packages from patch 124861-20 are installed on the system.

    Hi,
    The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
    When I tried to install the patch 124861-20, it failed with the following(see below):
    I have Sun Studio 12-2 installed on the system.
    It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
    Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
    Thanks.
    Zhigang
    # patchadd 124861-20
    Validating patches...
    Loading patches installed on the system...
    Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
    Done!
    Loading patches requested to install.
    Done!
    The following requested patches have packages not installed on the system
    Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
    Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
    Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
    Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
    Checking patches that you specified for installation.
    Done!
    The following requested patches will not be installed because
    the packages they patch are not installed on this system.
    0 No Packages from patch 124861-20 are installed on the system.
    Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
    http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
    thanks,
    X A H E E R

  • Windows 7 SP1 x32 bit fail to install Windows SP 1 with error code: 0x80070643/0x800F0829

    Hi All,
    I'm unable to install MS Service Pack 1 in Windows 7 Professional 32 bit, failing with error code: 0x80070643/0x800F0829.
    1. Remove Symantec Endpoint Protection.
    2. Run System Update Readiness Tool
    3. Install MS SP 1 and fails.
    Here is the log file.
    https://onedrive.live.com/redir?resid=7627981B9D84362B%211869
    Thanks,

    Hi,
    I suggest you download the full package, and try to install it in Clean boot Mode:
    Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
    http://www.microsoft.com/en-in/download/details.aspx?id=5842
    If the issue still persists, please try following command to repair Windows:
    SFC /scannow
    You can also try the In-place upgrade to clean your Windows and install the update again:
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099
    Kate Li
    TechNet Community Support

Maybe you are looking for