Auomatic TO creation and confirmation from PCN with 321 MVT type

Dear Friends,
I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
I don't want to use LT05 separetely to make TO from PCN.
Please reply me soon.

You need to make the config settings here in ur system.
SPRO > Logistics execution > WM > Interfaces > Inventory Management > Activate Automatic TO Creation
Assign the relevent setting to movement types...
Hope thsi helps
Thanks & regards
AHP

Similar Messages

Immediate TO creation and confirmation during MB1B

Hi
In one of our client scenario , we need to create a immediate TO creation and confirmation with respect to PCN created during stock transfer from one storage location to another storage location with in a same plant .
I have done the neccesay setting in Tcode OMLR , but the system is not been able to create the immidiate TO perhaps system doesn't know from which storage type it sohuld select the material.
Can anybody hleps me how to configure this . Do i need to customise storage location control .if yes then what are steps in details ?
Thanks
RAJK
Edited by: RAJ K on May 3, 2010 10:37 PM

Please refer the following thread: -
TO not created from TR
Thanks
Swagat

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

Stop Automatic creation and confirmation of Transafer Order for a doc type

Hello All,
There is a requirement that I need to stop Automatic creation and confirmation of Transafer Order for a particular document type.
The issue is that sometimes the cycle goes upto creation of Invoice automatically but sometimes this does not happen. More over the user wants that the transafer order needs to be confirmed manually.
Can u please provide the .steps involved for thie case.
Thanks
Chandrashekhar

Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2

Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

Hello,
We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
Can someone throw more light on the customizing/BADI/enhancements etc required??
Thanks and Regards..

Hi koen,
I tried with the FM that you suggested...
But somehow with the process type 'stock removal' gives an error...
Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
Thanks in advance,
Rashmi.

I bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that ?

i bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that or delete one user ?

Hello sapiii96,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
To sign out of your Apple ID
Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
Best of luck,
Mario

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

How to exclude music and pictures from backing with USMT in SCCM 2012 SP1?

How to exclude music and pictures from backing with USMT in SCCM 2012 SP1?
I know we can use config.xml but I m not sure what all steps to take.
Below is my understanding
1. Create Custom.xml file using below
<component context="System" type="Documents">
        <displayName>Test</displayName>
        <role role="Data">
            <rules>
             <unconditionalExclude>
                        <objectSet>
    <script>MigXmlHelper.GenerateDrivePatterns ("* [*.mp3]", "Fixed")</script>
                        </objectSet>
             </unconditionalExclude>
            </rules>
        </role>
    </component>
</migration>
2. Save as Custom.xml.
3. Copy it to USMT source files package in both the x86 and x64 subfolders and update the relevant USMT package distribution points.
I am confused as where in task sequence will we specify the custom.config file.

Edit the miguser.xml file. The default list is as follows:
-<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qdf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qsd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qel]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qph]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.doc*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dot*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rtf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mcw]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wps]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.scd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wri]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wpd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.xl*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.csv]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.iqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.oqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wk*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wq1]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.slk]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dif]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ppt*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pps*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pot*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.sh3]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ch3]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pre]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ppa]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.txt]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pst]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.one*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vl*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vsd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mpp]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.or6]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.accdb]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mdb]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pub]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.xml]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ini]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dgn]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dic]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dsk]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.gqa]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.gqu]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.id]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mpp]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ora]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pab]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pdf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pps]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qry]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.r2w]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rdl]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rsf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.url]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vdx]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vss]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vst]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vsx]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vtx]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.zip]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rar]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.7z]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.iso]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.gif]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.jpg]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.bmp]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mp3]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.avi]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mp4]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wmv]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.bat]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vbs]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.lnk]", "Fixed")</script>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Automatic TO creation and confirmation for a Material document

Hi Dear All,
i am new to MM andWM.
I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
Double click on control data tab
Hear for my warehouse I given input like   Auto TO = 1,
                                                                         AddId = select check box.
And in Assign control tab for 101 movement type I have given input like below.
Automatic TO = 1.
TO item can be confirmed immed. = tick checkbox
Propose Confirmation = tick checkbox.
Foreground/Backgrnd = D.
After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like TO processing finished: TR total:   17, TO created:    0, Errors:   17.
If I check header details of transfer requirements in LB03, i am not seeing Tick Mark in Auto TO Creation field.
Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
Thanks in Advance..

Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2

What configuration is need for TO creation and confirmation automatically

Hi experts,
our business hope TO can be created and confirmed automatically in backgroup based on TR when GR, GI, how to configure it? Thank you.
Current system configuration:
1. every material have a fixed bin in master data.
2. Putaway strategy is fixed bin.
3. Pickup strategy is FIFO.

Hi Greetings
TO can be created and confirmed automatically
Immediate TO creation
OMLR --> Mark the field Indicator: Create transfer order immediately with A-Start transfer order creation in the background
for the Warehouse number and reference Movement type combination.
Immediate TO confirmation
SPRO --> Logistics Execution > Warehouse Management> Activities> Transfers> Define Movement Types --> In the details screen tick "TO item can be confirmed immediatly" check box.
Gobinathan G

Brother HL-3170CDW won't print in color, has poor print quality. I have downloaded drivers, and firmware from Brother with no success.

Just received this printer, and am unable to have any success with it printing in color. I have downloaded drivers, and firmware from Brother that are for OSX 10.9. Also, the print quality is quite poor. Any suggestions what I should be looking for to resolve this? I feel like I am back in the 90's with Windows 3.1!

You need to go to the brother website and download the driver for your printer. I had the same problem, and resolved it just now. The driver for this particular printer is not a good match for any of the preinstalled printer drivers on os x.

Restriction of goods reversal with 262 mvt type in MIGO

Hi,
During goods reversal using mvt type 262 with reference to a production order, we are able reverse any amt of qty, I want to restrict the reversal to the extent of other than confirmed qty.
Eg. Order qty 10 EA, GI done 10 EA (BOM 1:1), confirmed qty 5 EA. I should be able to reverse only 5 EA or less and not more, as 5 EA already consumed.
Regards,
Jagadeesh.

Jagadeesh,
This check can only be possible using user exit "EXIT_SAPMM07M_001" of Enhancement MBCF0002, you can write your logic in Include ZXMBCU02.
Regards,
Prasobh

Issue material to particular storage location with particular mvt type

Hi
I have a question about production order confirmation
If i enter the storage location in goods movement page automatically come for movement type
ex.
I want to issue the material to scrap location.if i enter material and storage location SCR movement type should come 531.
Is it possible ?
Pl guide me

531 movement type is used for receipt of By-products. So in your case if a particular item you want to receive in scrap location by the use of 531 then you have to define the item as by-product.
If you define the material as by-product then during production order confirmation at goods movement screen, the movement type will be automatically 531.
The main material (manufactured material) will be received using 101 and the by-product will be received by 531.
Please follow below steps to define the item as by-product:
- First change the BOM of the header material (the material which is manufactured) and enter the item with negative quantity.
- Run Re-read PP master data for the production order.
- Try confirmation.

Return to vendor with 122 Mvt Type

Hi,
I am working on Return to Vendor, which as per SAP documentation says will trigger 122 Mvt type. I have done Quality inspection and performed a "Return" using followup action. This changed the stock type to "R8".
I went to PRDI screen and in the follow-on function I selected "Return to Vendor". It showed up the R8 relevant quantities. On "POST" the system gave an error message "Inward del. completed indic. for item already set, change not possible." Checked queues in ECC and EWM, no entry available.
I searched various forums and came upon thread, wherein configure the "Determine quantity stock handling" where we can set closing indicator so that Inbound delivery can be open. Trying to figure where this setting available there in ERP.
I am not sure, if this is the root cause, if any other ideas please guide.
Karthik

Hi,
what is your scenario?
When you find defective quantity in the inbound receipt, do you use the process code to adjust the delivery quantity and the transferred delivery quantity?
Do you have subsequent delivery split configured for the remaining quantity?
When do you post GR? Is it before or after putaway? Basically system does not allow quantity adjustment if GR status is completed.
Petr

Automatic production order creation and confirmation

Dear all,
I am in a situation where i have to configure the SAP system in the following ways:
1. From the planned orders automatically production order should be created today for the next day production and the end user will re-declare the quantity if there are any changes in the production order.
2. If there are no re declarations to be done SAP should automatically release production order and save it.
3. After the goods are produced the confirmation of the order should happen automatically from the measuring points.
4. In the order confirmation, the storage location for goods issue should be automatically captured from the goods issue slip.
5.After the confirmation of the order the goods receipt should happen automatically.
Please suggest me whether these are possible in SAP or not. If yes please tell me the procedure.

HI,
I hope this will give you the clear picture
actually my scenario is:
Finished good= x
work centers involved = WC1, WC2.
HERE BOTH THE WORK CENTERS ARE IDENTICAL, INPUTS ARE SAME AND OUTPUT IS THE FINISHED GOOD "X" FOR BOTH THE WORK CENTERS.
I HAVE A ROUTING FOR THE FINISHED GOOD "X" WITH TWO GROUP COUNTERS AS (1)WC1 AND (2) WC2
When i create plan in md61 for 1 month and when i do mrp run in md02 it will create the planned orders and we can see the stock requirements in md04 and when we double click on the planned order we can convert them into production orders.
But my users requirement is, he want to run the mrp in md01 and after that automatically each day the production order should be created.
example with the above work centers and materials:-
i have done the mrp run for "x" for November and December months
i want to produce "x" of 200 kg on 30.11.2011.
so SAP should generate production order for WC1 AS 100KG AND WC2 AS 100KG on 29.11.2011 at 5 pm automatically and the user will release the order.
similar example:-
i have done the mrp run for "x" for November and December months
i want to produce "x" of 400 kg on 03.12.2011.
so SAP should generate production order FOR WC1 AS 200KG AND WC2 AS 200KG on 02.12.2011 at 5 pm automatically and the user will release the order.
Please suggest me how to do the configure settings for my users requirement.
Thanks,
Aravind.C

Auomatic TO creation and confirmation from PCN with 321 MVT type

Similar Messages

Maybe you are looking for