Authorisation for SE16 and SE37 in Production

Dear All,
I need to clarify the usage of TCodes SE16 and SE37 in the BI system. I understood that both of these TCodes are not allowed to use in the Production Environment due to Controls and Compliance.
1. Since SE16 is only for data browsing, is this TCode allowed in Production at all?
2. For SE37, I need to access the "Test Function Module" option in this TCode. However, if this TCode is prohibited in Production, is there any other Tcodes that I could use in order to access this functionality?
3. Is there any documentation that provides a proper guidance for SAP Security access in BI? e.g which TCodes are Allowed to access and which are Prohibited (for Operational Support staff).
Thank you.

Dear Bryan,
we will have different responsibilities at different scenarios like
sometimes we have to work only on load monitoring
sometimes you have 2 work on erporting etc
so for a support staff mostly we require
TCODES -RSPCM-for Multiple Processchains  ,RSPC-To create processchain, SM58-for LUW's,DB02-To check the database size,SM37-Status of backroubd job,SM12-To unlock the objects, RSMO-To check how many infopackages are running,SM50-To see the work process,SM64-To trigger the vent
Regards,
Marasa.

Similar Messages

  • Updates for iPhoto (and other iLife Products)

    I have no problem getting the list of available updates for my computer. The problem is when I push the button for "Install 3 objects" and the download is supposed to start. Well, it kind of starts also, but it is not able to download a single byte. This happens with iLife08 products only, not the other updates.
    Anyone got a clue what is wrong?

    Reier
    Welcome to the Apple Discussions.
    No idea what the problem is but you can also download the from
    http://www.apple.com/support/downloads/
    Regards
    TD

  • Bar chart(Ghantt chart) for Plan and actual of production order

    I want to know that any standard Ghantt chart (Bar chart) is available to view the plan and actual qty, execution start and finish time of production order.
    In CO01/02/03 it shows only the planned execution time in Ghantt chart,but it doesnot show the actuals.

    CM07 gives about the information of capacity allocation. It will not show the actual execution from date and to date.
    I want to see the Planned from period to to-period and actual also in bar chart form.

  • Function module for se16 with out authority check for se16

    Hi ,
    I am creating a tode YSE16 which has same functionality as SE16 but having its own authority check. I am calling a function module RS_TABLE_LIST_CREATE function module to get the functionality of SE16. But is there any way that i can get the function module which do not check for the authorization for se16 and execute my tcode.
    Regards,
    Sri.

    Hi Sri,
    If I am not wrong this is the question?
    Guys , Sri is modifying the YSE16 as per this requirement. Do u have some other solution? Thanks.
    Requirement is to create customized tcodes YSE16, YSM30 and YSE38 for se16, sm0 and se38. Lets start with YSE16.
    Client want YSE16 tcode to restrict users based on some tables within a authorization group or even * value for auth group field.
    SE16 restricted on:
    S_TABU_DIS
    Auth Group and Activity
    As per Requirement YSE16 tcode sld be restricted on :
    Y_TABU_DI2 (customized object)
    Auth Group, Activity and Table name
    We dont want to give SE16 to users in Production. So basically requirement is to restrict users on table name with YSE16 irrespective on authorization group. User sld only be able to access the table mentioned in Table name field.
    so Srilu is trying to modify the Program. Can you please suggest some other way to modify it.
    Thanks.
    Regards,
    Naveen Dalal

  • Need to create a Z transaction for SE16

    Hi All,
    I have a requirement in which I need to create a Z transaction for SE16 and then restrict the access of that transaction to 3 tables and users cannot see other tables through this transaction. it would be fine even if this condition can be implemented on standard transaction(in SE16 with out creating a Z with the help of basis team).
    I tried to copy the transaction and also the program (program name: SAPLSETB and screen 230 even this program is made a Z program)
    but this is giving a short dump.
    Please let me know if the process i am following is correct if not can you please suggest me a better one.
    Thanks in advance.
    Regards,
    LRK.

    Hi
    U can assign your transaction to Z-report like this:
    PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
                TAB2 RADIOBUTTON GROUP R1,
                TAB3 RADIOBUTTON GROUP R1.
    DATA: TABNAME TYPE TABNAME.
    START-OF-SELECTION.
      CASE 'X'.
        WHEN TAB1. TABNAME = 'BSID'.
        WHEN TAB2. TABNAME = 'BSAD'.
        WHEN TAB3. TABNAME = 'BKPF'.
      ENDCASE.
      CALL FUNCTION 'RS_TABLE_LIST_CREATE'
        EXPORTING
          TABLE_NAME               = TABNAME
    *   ACTION                   = 'ANZE'
    *   WITHOUT_SUBMIT           = ' '
    *   GENERATION_FORCED        =
    *   NEW_SEL                  =
    *   NO_STRUCTURE_CHECK       = ' '
    *   DATA_EXIT                = ' '
    * IMPORTING
    *   PROGNAME                 =
    * TABLES
    *   SELTAB                   =
       EXCEPTIONS
         TABLE_IS_STRUCTURE       = 1
         TABLE_NOT_EXISTS         = 2
         DB_NOT_EXISTS            = 3
         NO_PERMISSION            = 4
         NO_CHANGE_ALLOWED        = 5
         OTHERS                   = 6
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • FD32 checks authorisation for all company codes.

    A User is authorised for his own company code (B) and credit control area (B).  Customer master is common for a and b companies.  When trying to maintain FD32 for common customer for company B, system is checking authorisation for A and returning an error message No authorization for analyzing accounts in company code A. For information we are on EC6.

    It would be just a warning message.
    Have you tried with a Customer who is only created in Company B? Probably in this case system will not display any messages.
    As your Customer is common for both Company Codes, system gives a message.
    Hope this helps, 
    Thanks,
    Jignesh Mehta

  • Aproove and deploy to production error

    Hi,
    when i tried to move for Aproove and deploy to production the following error occured.
    Failed to approve the project 'project name' for deployment. Unable to obtain exclusive deployment locks to one or more assets. Assets that are locked by other projects must be unlocked before attempting to deploy this project.
    Jk

    It means the assets you are trying to deploy are also in another project whose "Verify Production Deployment" is not completed or other projects have checked out before you started this project.
    So either finish the final step of those projects or delete assets of that project or deploy that project.
    -karthik

  • SOP-S076, Actual Data Update for Sales and Production

    Hi All,
    I have been working on a prototype to display the Actual Sales and Actual Production figures accurred during the past periods along with the Sales Forecast figures.  I am using Product Groups and the standard Info Structure S076 provided in the Standard SOP.
    Currently, the system is live with similar solution.  However, when I display the entries in SE16 for the Version 000, I get a message "No entries found".  As per the documentation, Version 000 needs to be populated by SAP and it can not be changed.  Therefore, I can not pull these figures in any of the Planning Types I created.
    I would appreciate any guidance to activate the Actual Version 000, in the Info Structure S076.
    Regards and happy SAPping to all.
    Mumin DIKMEN

    Hi Mahesh,
    Thanks for the reply.  I replied to perform the Statistical Update as well.  However, the response I am getting for the Info Structure S076 is
    <b>No information structure with active updating exists!
    Message no. M2784
    Diagnosis
    No information structure with active updating exists for event  and update group .
    System response
    Due to your data, the system cannot update any information structures.
    Procedure
    1. Check to see whether information structures using event  exist in the update rules for udate group .
    2. Check to see whether updating has been switched on for this information structure.</b>
    I also tried to activate this info structure in the case that SAP might have allowed updating definitions for S076 in ECC5, using the TCodes OMO* series in the IMG.  However, there is still no Update Definition option for S076.  When I display S076 using SE16N for the Version 000, nothing is displayed again in Production System. 
    I guess all this leads to posting an OSS note.
    I would appreciate your comments.
    Regards,
    Mumin DIKMEN

  • I bought my wife an ipad for xmas and the machine is faulty the apple authorised dealer admitted it was faulty and wants to replace my new machine with a factory refurbished unit. I told them that i will only accept a new one? am i right?

    i bought my wife an ipad retina for xmas and the machine is faulty, it keeps on switching off. the apple authorised dealer admitted it was faulty and wants to replace my new machine with a factory refurbished unit. I told them that i will only accept a new one as it is only a few weeks old and had the problem from the begining? is it correct that apple replaces new defective products with factory refurbished one? I have used apple products most of my life from mac 2 to G5. I had over a dozen apple machines and never had a problem so far? I do not believe this is right..

    architectmartin wrote:
    In the EU there is also a mandatory two year warranty by european union law. I am not a lawyer but i never signed or agreed to any apple policy at the time of purchase, i was told you have a two year guarantee bring it back if anything goes wrong which i did and now i am being quoted all sorts of policies. my own policy is that if you buy new you get new, with no excuses.  I feel a bit cheated by apple if i have to compromise with a second hand unit. the unit is not even a month old and we took it to the original store a couple of weeks after it was bought and they sent us to take it to a servicing dept in another town. I am an apple fan and expect excellent service like the products themselves.
    No one ever does sign anything - the purchase itself, where you exchange money for the product, is your de facto agreement to all warranties and policies set forth by both the seller and the OEM supplier.  That's a pretty firmly established principle of consumer law (image the nightmare if you had to read and sign to such things every time you purchased anything or everything?).
    You can complain to the store or to Apple about it if you wish.

  • Authorisation for Semi Finish Product Only....

    Hi Experts,
    I want to give authorisation for MM01 transaction and for only material type 'Semi Finish'. How to give only for Semi Finish to create?
    For display I want to give full authorisation ?
    YAB
    Message was edited by:
            YUSUF BHORI

    1. Use transaction MMB1 which is specially designed for creating semi-finished products. However I don't know of this really blocks the road for creating materials of another type.
    2. If you really want to authorize on Material Type you need to set an authorization group on the material type. In SPRO: Logistics - General --> Material Master --> Basic Settings --> Material Types --> Define Attributes of Material Types. Select Material Type HALB and type in a ctext of your choice in the Authorization Group field (tip: just use the name of the Material Type: HALB).
    Restrict on Authorization object M_MATE_MAR as follows:
    M_MATE_MAR
      Activity                    01, 02
      Authorization Group  HALB
    M_MATE_MAR
      Activity                    03
      Authorization Group  0-HALA, HALC-Z
    Good luck!
    Points are always appreciated!
    Kind regards,
    Lodewijk

  • When i try to open photoshop this shows up Please uninstall and reinstall the product.  If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.  Error: 16

    i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
    Please uninstall and reinstall the product.
    If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
    Error: 16
    and when i click the uninstall app on the file it tells me this
    The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
    and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
    please help thank you

    Run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Download CS6 products
    Mylenium

  • HT1386 How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

    How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

    Yes, I do have multiple devices and it appeared to me that every time I tried to sync or log onto iTunes, the password was incorrect.  Consequently, I was and am constantly changing it.  Wouldn't it be nice if Apple would simply say that you only need one Apple ID and one password regardless of the number of Apple devices you intend to sync via iTunes. 
    Barring the above, how about a way to merge all of the Apple IDs and passwords into one.

  • HT1386 I can't synchronise phone 5s with mac book pro. mac message me : the i phone could not be synchronised because this computer is no longer authorised for purchased items that are on this i phone. then go and authorised mac but keep send me the same

    I can't synchronise phone 5s with i tunes . mac message me : the i phone could not be synchronised because this computer is no longer authorised for purchased items that are on this i phone. then go and authorised mac but keep send me the same message.

    Hi john,
    Follow the troubleshooting steps in this article:
    http://support.apple.com/kb/ts1389
    Cheers,
    GB

  • I upgraded my iphone 4 to ios7 and syncd it, however after i restored my backup I couldnt sync because itunes claims my pc is no longer authorised for purchased items on my phone. I have repeatedly authorised the pc, and still receive the same error

    I upgraded my iphone 4 to ios7 and syncd it, however after i restored my backup I couldnt sync because itunes claims my pc is no longer authorised for purchased items on my phone. I have repeatedly authorised the pc, and still receive the same error

    Hello m2205
    Check out the article below to troubleshoot your authorization issue within iTunes, you may need to remove the SC Info folder.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    -Norm G.

  • When i try to sync my phone to my computer I get a message saying my computer is no longer authorised for purchased items on this iPhone. I go to "store" and it tells me that my computer is authorised. Any one any ideas how I can sync my phone?

    when i try to sync my phone to my computer I get a message saying my computer is no longer authorised for purchased items on this iPhone. I go to "store" and it tells me that my computer is authorised. Any one any ideas how I can sync my phone?

    Thanks Don-yes i'm using the correct apple id and yes I've plugged the phone into the computer-that's the problem, my computer doesn't recognise my phone anymore altho it comes up in iTunes library it won't sync anymore

Maybe you are looking for