Authorization for limited vendor for user in FBL1n

Hi,
I have certain user in my company, to whom, i want to give t-code FBL1N access. But for some vendors only.
Please let me know, how it can be done.

Hi Durga
As far as I see I can suggest you 2 options:
1. You can create a validation with sets for users and vendors. This way you can restrict to only the t-codes you want the restriction to apply
2. You can co-ordinate with BASIS to restrict using authorization object F_BKPF_BEK. You have to assign authorization group to vendors and give authorization to users for specific authorization groups. In this case, you cannot restrict only to FBL1N. The restriction would be applicable to all the transaction codes for the users where vendors are impacted.
Regards
Sowmya

Similar Messages

Getting for foreign vendor for getting excise capture

Dear all
is the any customization for capturing excise deatil for foreign, CIN is only for local or indian vendor, i m making import po where i have get cenvat for cvd, with JIED for foreign vendor how could i do.
regard
nabil

Hi sayednabil ,
First understand the concept.
Import PO you are procuring material from Import vendor thats all. when you see the material vendor invoice only material price will be there.
No link with Custom /Excise with Import vendor.
Custom & import duties all when the material reaching the indian orgin/sea.
You have to create vendor for each custom or fright & C&F vendors.
In Po condition type u are maintain all the condition type with vendor number.
subsequently GR& payment will happpen.
SAM

Strange output for one Vendor

Hello to all,
An end user has print a purchase order and there is some abnormal things on the output like payment terms conditions begin in the middle of the line but this problem is appearing only for a vendor, for all other vendors there is no problems.
Where can we have specifications for the output of purchase order related to the vendor itself.
Thanks in advance.
Best regards.
Zied.

Hi,
Check the output determination for the below partner functions in Vendor Master.
OA - Ordering Address
SP - Supplying Party
IP - Invoicing Party
VN - Vendor
Also check the NACE t-code for the Vendor / Plant / Company Code combinations for the EF (Purchase Order)
Regards,
Mohd Ali.

How to create one primary key for each vendor

Hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table vendor through XI.
structures are as follows:
sender side: ZVendorIdoc (this is a customized IDOC , if i triger IDOC for multiple vendors then it triggers only 1 idoc with multiple segment )
Receiver side:
DT_testVendor
    Table
        tblVendor
            action UPDATE_INSERT
            access                     1:unbounded
                cVendorName         1
                cVendorCode        1
                fromdate                1
                todate                    1
             Key1
                cVendorName         1
if i trigger idoc for multiple vendors ,for example vendor 2005,2006 and 2010 . then i can see that the only key comes from the very first field (2005) and the whole record for vendor 2005,2006 and 2010 goes into the table with this(2005) as a primary key
now again if i send data for these three vendor 2005, 2006 , 2010, in which record for the vendor 2005 is same and for 2006 and 2010 are different than it takes 2005 as a primary key and it does not update the data in the table.
my requirement is like this:   for each vendor there should be one unique key assigned.
                                          for above said example there should come three keys one for each vendor .
could you please help me how to do this???????????

Hi,
In Mapping Make the statement is 0-unbounded.For each vendor create a statement.This will solve your problem.
Regards,
Prakasu.M

PBXX condition type to acees price when for the vendor/material combination

Dear All,
Here the client requirment is that, they do not want to maintain inforecord for each vendor/material combination. They will maintain one inforecord for one vendor for a perticular material. So if they want to make a po with a diffrent vendor, they want the price to be copied from existing inforecord.
But i understand, if the inforecord does not exist for that vendor/material combination, then PBXX will come in to picture which will take the price from previous purchase order. If no po exist for that vendor/material combination, is there any way the PBXX will act and take price from existing inforecord.
(with a diffrent vendor for that perticular material)?.
Your responce to the above is highly apreciated.
Rgds,
Raghavendra N N

hi...hope this may help u..
while creating PO u can click the infoRec. box in the item level as so info rec is automaticcally created..
The price in the PO is copied frm last PO's if the abov said indicator is clicked or there is a customisation in IMG path
Material Mangament - > Purchasing - > environment data -> default values ...here u can change the A, B, C indicators as per ur requiremnt.
one more thing..in Info Rec u can set tthe date of price picking by chekcing the (pr. date cat.)....
Hope this may help u bro...
catch u in evning..
regards,
avs

How can I block Vendor for Quality Reasons at POrg Level ?

We are currently on ERP 4.7 and are facing the following challenge:
We want to block the Vendor using MK05 with the function Block for Quality Reasons at the POrg level.
Example: If we define a Delivery Block in configuration to Block Goods Receipt and then assign this blocking code using MK05 for Vendor X under POrg 1002, it also blocks the Goods Receipt for this Vendor X under POrg 1001.....
We realize that the Purchasing Block section of MK05 is per POrg but you cannot block the Goods Receipt with this functionality... only the Purchasing Documents can be blocked.
Would appreciate any feedback, ideas...
Thank You,
Johanne

Thanks very much for the feedback.
In MK05, under the Purchasing Block section, we can select whether the Purchasing Block is applicable to all POrgs or only Selected POrg.
This functionality is fine to block Purchasing Documents and can be controlled at the POrg Level.
Our problem lies in the second portion of MK05 - Block for Quality Reasons - If we select a Delivery Block which is configured to Block the Goods Receipt for Vendor , even if we selected the tick box - Selected POrg only, the Goods Receipt is blocked for this Vendor for ALL POrgs.
Johanne

Re: imported material for local vendor.

Hi guru's,
Our requirement is to get imported material for local vendor, for this excise postings should not be allowed (posted) when requirement is raised to local vendor.
what are the settings to be done for no excise capture.
replies awaiting.
tuljasingh.

HI,
First way: - Don't take excise able tax code in purchase order.
Second way:- Maintain vendor excise detail >> maintain tax indicator as 3 in J1ID.
Regards,
Mahesh Wagh

Setup of Inspection Lots for some vendors and not for all

Hello,
We do have a situation where in the business wants Inspection Lots to be set up for some vendors and not for some vendors - for the same material.
What it means is, for Material XXXXX001, Vendor 00003 needs inspection during GR for Purchase Order and Vendor 00005 and 00006 should be set up for Non Inspection upon GR and stocks should be posted to Unrestricted.
Any suggestions / options are welcome.
Thanks
Kris

Hello,
You can use vendor q-info records to handle this... deactivate the goods receipt inspection on the vendor(s) that do not require incoming inspection.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/b9b3341a933f50e10000009b38f83b/frameset.htm
Regards,
John

DMEE :More than one invoice for a vendor payment

Hello Experts,
I'm trying to create a file for payments to vendors through transaction DMEE.
I've create a new structure in DMEE, tree PAYM where given pace for atleast 4 invoices with semicloumn.
but when I'm runing the payment run for more than one invoice for the same vendor, the file only shows the first one with repeation and filling all structurewith only 1st invoice.
Issue is when payment run for a vendor for more than one invoices, only the first invoice has shown in the file.
Sturcture of the file coming after payment run is filled like this , pasting below for your referance.
000000016000.0020080310 12025000003958560010000710200713 0072394000Spoerle Electronic Kft HU010 INV.123452345434 ;INV.123452345434 ;INV.123452345434 000066
INV.123452345434 is the 1st invoice.....whcih is entering one after the other instead of 2nd / 3rd invoice.
Could you please help me?
Thanks in advance!
Nupur

hi,
i am also having same requirement.
i have to send the payment advice details to the bank.
for that i planned to create the settings in the DMEE.
so plz send the steps which you are created for your requirement
thanks ,
Ramu

WHT Remittance challan Sur chg shows in paise for USD entry for sec 195

Hi,
I am in support project and my client is facing problem of rounding of for payment of TDS for Section 195.
There is an Entry in F-43 for foreign Vendor for Section 195 where WHT is deducted with basic, Sur chg, Edu Cess and High Edu Cess.the doc currency is USD.
Now WHT deducted is correctly posted to respective GLs in INR with correct rounding off.
When I prepare Remittance challan( t-code J1INCHLN) for payment of TDS, the figure of Sur chgs in open Items shows in paise
it is not showing in rounding, and if I select those four figures for payment, the entry is as follows
Bank A/C cr              2901.77-
195 basic                 2749.00
195 E cess                   56.00
195 H Edu Cess            28.00
195 Sur Chgs                69.00
Foreign Ex gain              00.23-
Because bank is showing entry in paise,unable to pay it. It should be in rounding rupees.
I have check all rounding settings in WHT Config.
Requesting solution and how to resolve this problem. also wanted to know why the figure of surcharge is comming in paise in open items of remittance challan.
Regards
Sunil

Hi Karthik,
Logon to service.sap.com/notes and in notes area you need to enter the note no you are looking for.
U need to have an SXXXXXXXX user ID for that which you must have got while certification or check with the client.
Regards,
Rahul

FBL1N - Limit display line itens for some vendors

Hi All,
I have a request from business to limit the access for some vendors in FBL1N.
The idea is to limit the users to do not see the line itens for some vendors.
Is there some standard configuration? Any suggestion?

Ricardo,
My suggestion is to involve a Basis person for this. You need to check the authorization object attached to Vendor line item display transaction FBL1N.
Then explain to the Basis person the conditions in which certain line items should not be displayed. I am sure this exercise would be of help.
Regards,
Vishal.

How do I get vendor name in FBL1N for multiple vendors

Hi gurus. When I run FBL1N for a single vendor, the vendor name shows up. If I run FBL1N for multiple vendors, the list is subtotaled by vendor number, but the name goes away. How can I get the vendor name show up when the list is for multiple vendors?
Thanks
Janet

Well, we'll just have to deal with the header data. It is REALLY strange to me that NAME1 is a field you can choose in this report but not in FBL1N.
By the way, we try very hard to give our users a usable solution so that they don't have to download to excel. However, SAP doesn't always cooperate...... : (
Thanks again for your help today. You have solved my problem.

During MIRO"No amount authorization for customers/vendors in company code "

Hi All,
When I am doing MIRO the system is throughing message
"No amount authorization for customers/vendors in company code Z114
Message no. F5155
Diagnosis
No amount authorization for customer/vendor line items has been specified in company code Z114 for the user group to which you are assigned.
Provided that you are not explicitly assigned to a user group, the amount authorization to the group blank (" ") is valid.
Procedure
If you entered the correct company code, initiate the maintenance of tables T043 (user groups) and/or T043T (company code authorizations)".
Please tell me procedure and steps to solve this issue.....
Thanks&Regards,
chand

Hi All,
the problem didnt solve,
please tell me the steps to solve the issue...
hope to hear from you all.........
Thanks&Regards
chand

MIRO Error- No amount authorization for customers/vendors in company code

Hi Friends,
While creating Invoice (MIRO), when I enter amount at Header level, I faced below error.
No amount authorization for customers/vendors in company code XXX.
Message no. F5155
Please help to know how to rectify this.
Regards, RAMAN.

HI
My problem is not solved please guide me
No amount authorization for customers/vendors in company code xxxx
Message no. F5155
Diagnosis
No amount authorization for customer/vendor line items has been specified in company code xxxx for the user group to which you are assigned.
Provided that you are not explicitly assigned to a user group, the amount authorization to the group blank (" ") is valid.
Procedure
If you entered the correct company code, initiate the maintenance of tables T043 (user groups) and/or T043T (company code authorizations).
Regards
Krishna

IV Error No amount authorization for customers/vendors in company code IN01

Hi Friends,
I am getting an error "No amount authorization for customers/vendors in company code IN01"while doing MIRO.
Please help to resilve this.
Regards,
Ram

Hi,
Check in SPRO > MM > Logistics Invoice Verification > Authorization Management > Define Tolerance Groups > Here check the Tolerance Group for Company Code and also the amount
If it is not assigned then copy it from Company Code "0001"
Check in SPRO > MM > Logistics Invoice Verification > Authorization Management > Assign User Tolerance Group > Here check the Tolerance Group assigned to User

Authorization for limited vendor for user in FBL1n

Similar Messages

Maybe you are looking for