Authorization object of DMS Document Number

i need to limit access of users on range of document .
for example  :
i have created document type ZFI with number range 100 to 500
i need grant the access of a specific user to range from 100 to 300 only .
How can i do that ?
i need to know the authorization object of Document number .

Hi Reda,
You can use ACL authorization, There is the only option available to control authorization at document level.
The task for doing the same will take time if the documents are more, I hope there is some standard FM for ACL , try using the same and let me know the results.
Rgds,
Nayeem.

Similar Messages

  • Addition of New Authorization Objects in DMS

    Dear All,
    How to add new authorization objects in DMS?
    For ex: I have defined Projects in additional data through class/characterstics, now i want to bring that field in to authorization control and want control document creation with respect to characterstics values(Projects).
    Looking for documents or step by step procedures
    Kindly help me.
    Thanks in advance
    [email protected]

    Hi
    Im not so sure but you can create an Auth Key using BS52
    You can add it to Auth obj of Class/ characteristic
    You can get a list of auth obj in SUIM
    Niranjan
    Let me know if it helps...!!!

  • Link between purchase requisition and dms document number(cv02n)

    hai all,
    can u pls tell me how to get the dms document number(cv02n) for a given purchase requisition number?
    is there any table?
    Tnx & Regards

    try table DRAD with field DOKOB = EBAN. The number of PR is in field OBJKY.
    Teresa

  • Authorization object for requirement tracking number

    I want authorization object for requirement tracking number in PR ME51N.
    I have to make control over User against requirement tracking number that particular user can use this tracking number only while using ME51N.

    Check the t code su21 whether your requirement is fullfill or  not.
    If not make a authorization object with the help of abaper and assign this object to the particular user in their profile.
    Hope this is help.

  • How to see the DMS document number in PO / PR?

    Dear experts,
    I am using DMS. I have created a document in DMS and I have linked it to the PR & PO line items. Till it is fine.
    But I am not able to find out this document in PR / PO. Can some one help me how can I find the document number in PR / PO??
    Thanks in advance.
    Regards,
    Praveen

    In the ME23N screen , there is icon which likes a pin on paper between the Item over screen and the Item screen . If you click this icon , a new window with all the DMS documents linked to the PO would appear.
    This is in the same line of the delete , lock , copy etc ..sequence .
    -Hari.

  • DMS document Number ID

    Hi Experts,
    Could you please know the way to find the archive document ID for DMS documents.
    I  am creating a new repository  for DMS attachmments . But currently whether its stored or not to check this i need archive link document ID,
    Pleaseshare your thoughts
    Regard
    Geetha

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • DMS DOCUMENT NUMBER MISSING

    Dear Experts,
    I have encountered the problem for the last couple of days Documents Control Number continously missing from the DMS. Don't know i have already checked dump file even also checked from my technical team but noone can understand the exact problem. What scenario we people are doing in my organisationlet me tell u.....
    1)Our portal screen has been developed by webdynpro coder once vendor can upload the documents than automaticallu one document control number generate that we can see in CV03n but sometimes later when users want to see that particular documents it will not appear.
    2) Workflow also triggering at each level so no manual process following here.
    Can anyone suggest appropriate solution for this query why document control number is missing ?
    Moderator message - Please do not offer points or rewards
    Thanks
    Edited by: Rob Burbank on Aug 4, 2010 10:00 AM

    Moderator message - Cross post locked
    Also, Please read Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
    Rob

  • ChaRM - Authorization Object to show documents in CRM_DNO_MONITOR

    Hi folks,
    does anyone know which auth. object or other prerequisite is needed to show documents in transaction CRM_DNO_MONITOR?
    To our needs the SAP ChaRM default roles do not fit. So I am building roles from scratch (basically).
    Auth. trace via ST01 did not show anything relevant when executing tx: CRM_DNO_MONITOR.
    Sol Man 7.0, ST400-0017, BBPCRM500-0012
    Any help is appreciated.
    Thanks in advance.
    Edited by: Christian Kaunzner on Mar 9, 2009 10:28 AM

    Hi,
    I would still recommend to use SAP Standard roles as backbone and build on with your custom roles. Make a copy of standard roles. Creating from scratch would again have the same auth. objects that are available in standard roles.
    >
    Christian Kaunzner wrote:
    > To our needs the SAP ChaRM default roles do not fit. So I am building roles from scratch (basically).
    Can you let us know, how you want your roles to be defined?
    Feel free to revert back.
    -=-Ragu

  • Create DMS document from direct object transaction instead of CV01N

    Dear Experts,
    I have raised an issue for the same thing in past and got helpful reply also. However it is not working here. I have searched enough but did not get satisfactorily answer.
    My requirement here is to create and store DMS document directly from the object attached to DMS document type instead of CV01N e.g. create PR ME51N, create project CJ20N etc.
    So far I have done the required configuration to get create option in transaction while entering DMS document number. I kept document description field as an optional for respective document type and created and assigned role in Define profile step. Number range is internal. So I think all necessary configuration in place. Now problem here is when I am clicking on create easy document icon, it ask me to select document type and file from local machine also. But nothing is happening afterwards and document is not getting created and stored. Transaction return on screen without any number and so. Please help me out. Did I miss anything?
    Looking forward for your reply. Points will be allocated for answer.
    Best Regards,
    Bhagat

    Hi Bhagat,
    Select the document type in question,navigate to "Define object links".Please verify if the following values have been maintained:
    Screen no-233
    When new version-1
    Create document-1
    Document version-1
    Additional functions-checked
    Post this,re-test the scenario and share the results.Also,do confirm if you are able to create documents of the above document type using CV01n transaction successfully.
    Regards,
    Pradeepkumar Haragoldavar

  • How to Display DMS document in Enterprise Portal

    Hi All,
    I have a scenario as described below.
    I have a workitem which goes to user in his/her UWL  for  execution. When  this  workitem gets  executed  it  displays an Adobe Interactive form.
    Iin this  Adobe form i am giving links to DMS(Document Management System)  documents. So  when this link is clicked the related DMS document files should  get  displayed.
    Thru BAPI i m able to get DMS document number its  Object Links and  details of the  files (PDF,DOC,XLS etc..) attached to it.
    But I am not able to display this attached files on my enterprise portal. I debugged in R/3 and found out standard Function Modules which are used to display this attached  documents of DMS and wrap them in RFC and called this RFC when user   clicks link on Adobe Form in EP.
    The problem I m facing is this RFC is not able to display the attached document files of DMS document on Portal front end. it gives error as u201CException condition "NOT_SUPPORTED_BY_GUI" raised., error key: RFC_ERROR_SYSTEM_FAILURE"
    The reason behind why it is running successfully in R/3 is, it gets  front end as SAPGUI but  while we execute it thru portal it does not get frontend type as SAPGUI cause  portal always runs in Browser not on SAPGUI.
    So, Is there any way to display this DMS document files on Enterprise Portal?? Or  is it  possible using Knowledge Management?? Or any other standard  BAPI or FMs which can be used for the same  purpose??
    Regards,
    Dhruv

    Hi Steelman,
    You have to create a new iview and include it in the page that youhave created.
    There are many types of iviews that you can create.
    Please refer these link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/content.htm
    Revert back for further queries.
    Regards,
    Sharadha

  • MIRO document Number range buffering problem

    Dear all,
    My MIRO document number is not following the sequence. if my first 5 numbers come in a sequence, then the next 5 numbers are not coming in between. Instead, the next 5 numbers are coming. It might be due to number range buffering problem. How to find the number range object  for  MIRO document number range?
    How to solve this?
    Please suggest.
    I will award full points.
    Thanks & Regards,
    AR

    Hii,
    You can search the Number Range object in T-Code: SNRO
    The Number Range object for Invoice document is RE_BELEG
    Go the Change Mode of the Number Range Object in SNRO, remove the No of Numbers of Buffers (by default it will be 10).
    This will resolve your issue.
    Regards,
    Kumar

  • HR authorization for Display the documents  in SAP DMS

    HI experts,
    We want to control display authorization depending on the entry made in object link tab in DMS( DOcument Management System). We developed screen for HR master object link. When user executes cv03n and enters document No. system should check hr master number entered in object link. If the user has authorization for that hr master number in PA (personnel administration), then he should be allowed to display the document. Otherwise it should restrict him to display the DIR.
    Now my query is how to achieve it. Can anybody provide me some solutions
    I have one solution, whenever user enter document number in cv03n screen, system will first check hr master number entered in object link and it will check the Personnel Area, Employee group and employee subgroup aginst this hr master number. Say for ex: PA:1000, EG:1 and ESG:01 for HR number xyz.
    Now system should check in roles assigned agaist user id for these PA, EG and ESG values. If user has got authorization for PA:1000, EG:1 and ESG:01 in HR roles,then he should allowed to display the document.
    Now my query is how feasible this approach? is this tough task for abaper? or is there any easier approach than this.
    regards
    sham

    Hi,
    Try to use the User Exit: CNEX0002.
    Check with your ABAP er for the enhancement.
    Hope it helps..
    Thanks!!!

  • Delete link between a DMS document and a change number

    Hi. I've associated several DMS documents to a change number, using CC02 transaction. Now I'm trying to delete these links. I can neither delete them nor delete change number. I've marked "Deletion indicator", but I don't know how I have to continue.
    Best regards, Iván.

    Hi Iván,
    please use report MCDOKDEL: This report is used to delete the Documents which are marked for deletion.
    To delete the linkage between change number and object link, please go to CC02 and select button "Objects". Here you can see all linked objects to this change number. Select tab "Documents" and mark the document for which you want to delete the link. Afterwards please press the delete button. Then the linkage to this document should be deleted.
    Regarding object link problems please see also the following SAP notes:
    880077
    885977 and
    960202
    Hope this information will help you.
    Best regards,
    Christoph

  • Object Link to DMS document - does not allow to link to docs not released

    Hi Folks,
    I am trying to create an object link from cProjects 4.5 to a DMS document. When I select a document in DMS I am getting the message "26 223 Document <doc_number> has not been released". If I set the status of the DMS document to a released status I am allowed to create the object link.
    My question is - why am I only allowed to object link to released DMS documents? I want link to a DMS document regardless of the status.
    Thanks,
    Lashan

    Hi Lashan,
    Not sure whether this works, but do check in CFC01 and see "Document Type Dependent Data'
    Regards,
    Aby

  • Manual document number in User-Defined Object

    Hi Experts,
    I have a user-defined object of document type.  I am trying to post a document using the General Service. However, I cannot assign manual document number.  There is no handwritten property available.  Is it possible to assign manual document number in user-defined objects using the DI API?
    Thanks.
    Melvin

    Hi,
    This issue has been resolved.  For the benefit of those who will be encountering this error, it was resolved by manually assigning the Handwrtten field to 'Y'.  Here is the code fragment:
    shipmentHeader.SetProperty("Handwrtten", 'Y')';

Maybe you are looking for

  • How to change default thresholds for some metrics of all targets.

    Hi! We have a lot of servers which have to work hard. So, our OEM very often generates messages like these: "EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold." "EM Alert: Critical:dbsora9

  • How can I transfer pictures from my PC to my Android?

    I'd like to see if I can xfer pics from my pc to my phone. I connected it to pc w/usb cable but after it updated the phone software the icon disappeared from the Device list in the "My Computer" window.

  • Out of Memory Error - JBOSS - JRocket

    I continue to see my jrocket/jboss/linux servers crash daily in production for out of memory errors. When we trace back the stack to find a query that does not appear to have nearly enough data to bring the server to an out of memory state. Heap usea

  • How to create screen sequence and assign to material type

    Hi, How to create new screen sequecnce and how to assign it to material type, is there any link of Industry sector with this. regards,   zafar

  • Quicktime Cache Folder

    I was looking into my quicktime cache folder at users/Library/Caches/Quicktime. I see a download folder that is around 260 meg. Can anyone tell me what is being saved in this folder ? And can I trash the contents periodically ? Thanks for any info on