Authorizations for 'Launch Application..'

Can somebody guide me in finding the Authorization for the 'Launch Application...' in the Tool bar?
Thank
Franz

Hi Franz,
The authorization under General -> Layout to PDF will apply for Launch Application as well.
Regards,
Vijay kumar
SAP Business One Forums Team

Similar Messages

Eclipse- "No Tab group defined for launch application type/n

I was developing nicely on Web Sphere Studio Developer Version=5.1.0 (with eclipse Release 2.1.1) but I just started getting the error "No Tab group defined for launch application type/n org.eclipse.jdt.launching.localJavaApplication" when trying to run or debug. I was trying to parse&validate an XML file and getting a log of the Parsing errors.This might have done something. However, it was working before..Any ideas before deleting and reloading Eclipse?
Cigdem Savaseri-Brackmann

Hi Jin,
I'm having the same problem ... how you solved?
Thanks!

Authorization for Web Application Designer

Hello,
I'm trying to grant authorizations for the WAD without having to grant SAP_ALL and SAP_NEW. What authorizationobjects do i have to use?
We're working on a BW7.0 (SP12) system.
Kind regards.
Joost Kruk

hi Joost,
take a look
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/frameset.htm
Business Explorer - BEx Web Templates (NW 7.0+)/S_RS_BTMP
Authorizations for working with BEx Web templates
Business Explorer BEx reusable Web items (NW 7.0+)/S_RS_BITM
Authorizations for working with BEx Web items
BEx Broadcasting authorization for scheduling/S_RS_BCS
Authorization for registering broadcast settings for execution.
Business Explorer BEx texts (maintenance)/S_RS_BEXTX
Authorizations for the maintenance of BEx texts
hope this helps.

Authorization for Web applications

Hi, friends,
We have already developed some Web applications and we stored the user id and encrypted password in the database using JCE. We can handle authentication by ourselves. But we want to set up authorization on these Web applications, for example setting up authorization on a certain Web directory holding a bunch of JSPs. How can we do that ?
Thanks
John

Hi John
We am writing a basic J2EE framework where we have pluggable Authentication modules using Kerberos etc. I was jus curious as to what your Authentication system uses and how its done.
Gracias
Ram
I will add some of my comments on authorization as soon as the document is complete.

Web Reporting Authorizations for Web Application Designer

Hi,
any information on authorizations in context with the Web Application Designer would be appreciated. I know the data access is regulated the normal class RS and RSR authorization objects. Any way to secure and regulate access to the Web items in the WAD?
thanks,
Michael

Hi Michael,
Security settings are the standard ones (RS/RSR) as you mention plus limiting access to Web templates using roles.
I do not know any mean to limit access at the web item level; you can define security restrictions on the underlying queries though.
Best regards,
LauQ

Restricted Recruiter Authorization for Requisition (ERC_A_REQ_MGMT)

Dear Friends,
My client wants to only give the display authorization for requisition (application "ERC_A_REQ_MGMT" ) to restricted recruiter(SAP_ERC_RES_RECRUITER_CI_4) role.
In standard system restricted recruiter can change any field data for requisition, which we don't want.
Kindly tell me any way out through which we can achieve this.
Chohan

You can create an application configuration for that application, than assign component configurations for the webdynpro which you create where you define all fields as read-only.
Than you give the restricted recruiters the links with the application configuration.
Or you do an enhancement of the webdynpro, but that should be plan B

Function authorize in packages for web applications in Oracle XE

Hello,
i have created a simple test package as follows:
PACKAGE TEST IS
function authorize return boolean;
procedure test;
END;
PACKAGE BODY TEST is
FUNCTION authorize return boolean is
BEGIN
if OWA_SEC.GET_USER_ID = 'test' then
return true;
else
return false;
end if;
END;
PROCEDURE test is
BEGIN
htp.prn('Hello World!');
END;
END;
i have also cerated a DAD with this command:
DBMS_EPG.CREATE_DAD (' test ', '/test/*');
i want to run this link in my web browser: http://127.0.0.1:8080/test/test.test
When i use a real database user then the function test works ok.
But i want to make it work with the user name "test" throw the function authorize.
In my opinion i am creating a DAD in a wrong way. Can anybody help me?
Thanks in advance for your help.

Hi,
AFAIK, there is no official document which states that "Oracle Functional Testing for Web Applications" is certified with Oracle E-Business Suite 11i/R12. I assume it should work with Forms 10g but not with Forms 6i, so it should work (does not mean it is certified) with R12.
I would suggest you log a SR and confirm this with Oracle Support.
Regards,
Hussein

Hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic

hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Creation of initial DB for new application

Hello,
I have to develop an application in a not connected environment, having synchronization with a master repository, so I'm using Oracle Lite.
As far as I understood the process of creation :
1- Create local DB
2- Create the application
3- Publish application
a. define authorizations
b. define tables to synchronize
4- Get new application on client
I'm facing difficulties to create the DB : the tables I need already exist in the master repository, so I made a local copy of them.
But I need to use Views existing in the master repository : how can I define them since they refer tables that are not present in the local database ?
The process is not really clear for me.

if you need to create a win ce application my way to do it is the following in a bit more detail:1)have your cab file ready. the cab file is the installation file for your application. there can be more than one
2)Create your database through your sql developer (if your using oracle as your repository database)
3)use your workbench to create a new project, create your publication items based on your tables. add some sequences if you need to.
remember that if you need to do some data subsetting then you need to put a variable, for instance
select * from customer where salemanid=:myvariable
4)create a new publication and add your pub items and sequences, save it
5)run your packaging wizard, create a new application , select the application folder that you have your cab files and select you
publication (if you dont know your repository url, you can see it through the mobile manager->data synchronization->repository
6)select the cab files from the corresponding tab. then select publish the application. enter the administrator's credentials and click ok
. by the way if you have a new cab file in the future and you want to update your app, then use packaging wizard to edit the app
7)go in the mobile manager, create a new group of users . go in the application and give access to the group. then create new users and
add them to your group.
8)go in the application->data subsetting and enter the myvariable value (remember that if it is string we put it in '...' if it is number i think you dont need that)
9)then go to your client,pda in my case . open your internet explore and go to your server/webtogo. select setup from the top corner,choose your client and run it
10)enter your user's credentials and whoops dmagent is registered.
11)go in start->programs->oracle msync and sync. your database is now created, click ok and exit. oracle update pops up saying you have a software update.
its your cab files, install them too!
>
Ok this worked on the mobile PC!
>
12)client is ready to be used. there might be the case that you need to enter some specific language or other parameters but thats
out of the scope of this thread i guess.
hope i didnt forget anything:P
good luck>
I tried to launch the msql command line but it answered me: 'Access violation' X-(

'Unable to Launch Application Error' - Java Web Start Running Under MS IIS.

I am attempting to render the following .jnlp in MS IE:
<?xml version="1.0" encoding="utf-8"?>

<jnlp
   codebase="http://localhost/LottoMadness/"
   href="LottoMadness.jnlp">
   <information>
     <title>LottoMadness Application</title>
     <vendor>Rogers Cadenhead</vendor>
     <homepage href="http://localhost/LottoMadness/"/>
     <icon href="lottobigicon.gif"/>
   </information>
   <resources>
     <j2se version="1.5"/>
     <jar href="LottoMadness.jar"/>
   </resources>
   <application-desc main-class="LottoMadness"/>
</jnlp>I've deployed the .jnlp, .gif, and .jar to MS IIS, running locally on my PC.
When I attempt to render the .jnlp in IE I obtain an 'Application Error' window stating 'Unable to Launch Application'. Clicking details gives me:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost/LottoMadness/LottoMadness.jnlp
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)I have configured MS IIS for Web Start, by setting the Extension/Content Type fields to .jnlp and application/x-java-jnlp-file.
(The .jnlp is basically from 'Programming with Java in 24 Hours', as this is the book I am learning Java from.)

AndrewThompson64 wrote:
I am not used to seeing references to a local server that do not include a port number.
E.G. http://localhost:8080/LottoMadness/
I have deployed the following HTML (HelpMe.html) to the web server:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title>Untitled</title>
</head>
<body>
Help Me!
</body>
</html>When I attempt to render the URL in IE, I see the page just fine. The URL is use is:
http://localhost/LottoMadness/HelpMe.htmlSo, I think my web server setup and usage is ok.
>
As an aside, what happens if (your MS IIS is running and) you click a direct link to..
[http://localhost/LottoMadness/LottoMadness.jnlp|http://localhost/LottoMadness/LottoMadness.jnlp]
When I click this link I get the error and exception I cited in my previous post.

APEX 3.0 with Single Sign On for single application

Hi All,
I have been playing around with SSO (IAS 10.1.2) and an APEX application for the past couple of days and am still having problems.
I have followed the instructions word for word in the various how to documents named in this forum and am now at the point where I successfully redirect to SSO login page > login using a username created in OID (which is the same username/password in my application) > then get redirected back to "http://<MY_SSO_HOST>:7777/sso/auth"..
Some things about my instance:
1. Oracle DB > 10g 10.1.2
2. Oracle IAS > 10g 10.1.2 (different server to above)
3. APEX 3.0 > trying to run SSO authentication against a single application rather than the whole APEX instance.
4. I have (after a lot of grief - figured out that the DAD MUST be /pls/somedad and that the port number 80 must be defined in the SSO token regardless - those two little gems got me as far as I am..
Now I know very little about SSO and am trying to evaluate it for my application (which uses a DB login/password and has to continue to do so for other reasons which I do not control). I am assuming there is some method of synchronizing the OID/SSO repository with my db accounts but haven't yet figured that one out.
I cannot for the life of me see what's wrong here. Any ideas??

Thanks Scott..
Okay let me go through the responses here..
...login using a username created in OID (which is the same username/password in my application)
My application overlays another Oracle application (old client server) which relies on physical database user accounts to perform its own internal grants etc. i.e. it uses where USER = blah all over the place.
Therefore my application is currently using the internal authentication scheme DATABASE (using DAD to resolve the credentials). In attempting to use SSO I am assuming that SSO must in some way be synched with my database (otherwise how does it pass any password changes applied in SSO to the database?)
Given that it's a base install (SSO) the only login I have there is the default orcladmin account. So I am trying to figure out how to get SSO to pass an acceptable login name/password to my application. My first attempt has been to create a user in OID that matches the DB login to see if SSO passes these on login - maybe I'm completely missing the point here??
...After login you get redirected to "http://<MY_SSO_HOST>:7777/sso/auth"? That's not right..
I have created/registered the application as per the how to guide using <my app name>.<my host>:<port> and setting the success URL to http://<my host>:<port>/pls/<mydad>/<my schema>.<custom success proc>
When I fire up my browser and go to http://<my host>/pls/<mydad>/f?p=9900:1 it sends me to the SSO login page. After entering my username and password I then end up with a HTTP 404 - not found page with the URL "http://<MY_SSO_HOST>:7777/sso/auth".
..You should think about getting to 10.2 at least, ..
Agreed but when I tried to upgrade the other day it fell in a big heap - so I backed it out to 10.1 again.
..I think I know what you mean. You installed the SSO SDK in a schema local to one workspace..
That is correct - had to do it as my instance has multiple applications and I want to check it works on this one before breaking anything else!
..No, that's not always the case. If you find that putting '80' in works in your configuration and leaving it out doesn't work then put it in..
I tried initially without the 80 but it threw errors whenever I tried to connect (these errors were APEX ones not SSO). On an off chance I put the 80 in there and presto it worked (in the sense that it redirected me to SSO anyway).
..Your application's use of a DB login/password is incongruous with using a different authentication method -- SSO or any other...
Given the constraints mentioned earlier (answer to first question above) I don't really have much choice. I have an Oracle application that uses DB accounts to authenticate users and authorize thier use of the app modules. What I need to do is 'wrap' and APEX application around this Oracle application to make it SOX compliant (it does not currently enforce password aging/structure etc.) So.. I was thinking that SSO might be the answer.
If SSO (used with OID) can enforce password aging and policies my intent is to have SSO 'manage' the user passwords for my APEX app (and it's underlying Oracle application). Hence the question about synching SSO with the underlying DB accounts. I thought the whole point of SSO/OID was to allow various enterprise apps to have thier authentication layers 'managed' by SSO - again maybe I'm misinterpreting this..
..if your application is working now with a non-SSO authentication scheme, then it should continue to work the same with SSO because after authentication, APP_USER is FRED in both cases..
Agreed - but how does SSO "know" to let a given user have access to that particular application?
Paul

Unable to launch application error

Everytime I try to open a jnlp file i get the Unable to launch application error. I have no clue how to fix this and would like to know a solution. I currently have JRE 6 Update 6. Here is the error info.
java.lang.Exception: cache failed forhttp://pokeglobal.sourceforge.net/game/beta.jnlp
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Java Web Start 1.6.0_06
Using JRE version 1.6.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\MILTON
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
#### Java Web Start Error:
#### cache failed forhttp://pokeglobal.sourceforge.net/game/beta.jnlp

I see, you found a solution for this problem. Can you share it with me please, because i am having the same error right now.

Problem with Authorization for Planning folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
Abraham

Calling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category                   Internal Kernel Error
Runtime Errors         PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
    An error occurred during the receipt of a complex parameter.
What happened?
    During a remote function call, an error occurred while converting
    a complex parameter.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred during the conversion of a complex parameter.

What's the best way to do authorization for my app?

The authorization situation is somewhat complicated for my app.
Each component of the app is authorized based on not only the user, but also the page number, the value of at least one P0_ITEM.
From what I've seen so far, there are two different options of setting the authorization for the component:
1. Set its Condition
2. Set its Security Authorization Scheme
Here is my understanding for each (from my limited experience with APEX):
1. Set its Condition
+ Can pass in parameters such as :APP_USER, page numebr, P0_ITEM. So I can just create one function that does all the authorization
- Have to combine the SQL query with the component's non-authorization display conditions, if any.
2. Set its Security Authorization Scheme
+ By name, it seems like it should be used for authorization
- Cannot take in parameters relating to the page, such as the page number --> therefore I will need to create many different schemes, for all the different pages.
#2 will end up with a long list of schemes (each with its own SQL queries) for different pages, which doesn't seem as efficient as #1 with far fewer SQL queries and just take in parameters.
Which one should I pick?
Thanks!

953006 wrote:
Thanks fac586 for the detailed response, and also everyone else who replied. You guys are very helpful and respond promptly. And we'd appreciate it if you changed "953006" into a real handle promptly.
Andre mentioned using conditions:
The way I work around this is to have two functions, one which is used at the page level as a normal authorization scheme and one which can be passed variables which is called as a Condition and the name of the item is one of the variables, in effect giving it "self awareness".But fac586 said:
You can't pass "parameters" to authorization schemes. Use application items, APEX collections or application contexts to set current context before the authorization scheme is evaluated, and access these values in the functions.Does this mean, fac586, that we can avoid conditions altogether? No, it means that I prefer to use Authorization Schemes to control access to resources based on user privileges and security, and Conditions to control rendering and processing for functional reasons. Using the approach described above I have found it possible to maintain this separation.
Say if a page has two buttons, Button_A and Button_B. Button_A has a set of requirements for displaying and Button_B has its own set of requirements (some of which are shared with Button_A). So far, the only way that I can see of using pure authorization is to write 2 different authorization schemes, and set the authorization schemes for the two buttons respectively.What's the problem with that? Consider a more concrete example using a standard APEX report/form pattern for customer maintenance. Page 6 contains the report, and page 7 is the maintenance form with P7_CREATE and P7_SAVE buttons. Only users entitled to create new customers should have access to P7_CREATE, and only users able to edit customers access to P7_SAVE. This would be controlled by the CREATE_CUSTOMER and EDIT_CUSTOMER authorization schemes respectively. Functionally, conditions are used to show P7_CREATE if the P7_CUSTOMER_ID is null, and P7_SAVE if it's not null. We don't mix non-functional security considerations with functional requirements.
The CREATE_CUSTOMER and EDIT_CUSTOMER authorization schemes are of type PL/SQL Function Returning Boolean. These are implemented using package functions. Exactly how a user has create/edit customer privilege is determined in the package. Determinants that are shared by multiple schemes can be combined at this level. These implementations can be changed as necessary without requiring changes to the application.
The authorization schemes are reusable across pages and components. On page 6, CREATE_CUSTOMER can be used on the "Create New Customer..." button; EDIT_CUSTOMER on the report column containing the "Edit" links.
Each component of the app is authorized based on not only the user, but also the page number, the value of at least one P0_ITEM. So I guess this goes back to my original concern with Authorizations:
[Using purely authorizations] will end up with a long list of schemes (each with its own SQL queries) for different pages [and page items] ....
Re: VPD policies. Note that in the example above there's no need for the authorization schemes to "know" which pages/items are being evaluated. The P7_SAVE button and the page 6 link column are involved with the EDIT_CUSTOMER operation, so that authorization scheme is applied to them.

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

Authorizations for 'Launch Application..'

Similar Messages

Maybe you are looking for