Auto 2 sided printing

How do i get back the auto 2 sided printing feature in my properties setting?

Hi,
Depending on your printer, you can also setup default for EACH application such as default duplex for Word but not for photo print (Many printers will detect this for you). What is your printer and where do you print from ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP printer 5514 and two sided printing.

    I have the HP photosmart 5514 printer and I think it will do two sided printing, but how do you get it to do that??
    This question was solved.
    View Solution.

    Hi,
    Based on the following information, no, it can not print duplex (auto)
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02907978&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Two sided printing in Windows 7

    I have a duplex printer.  Previously (Windows XP), I could set the default on my printer to print double automatically by right-clicking on my printer icon in Printers & Faxes, clicking Properties then clicking Printing Preferences, then selecting from the drop-down in "Print on both sides:"  Now, I can't find that and have no idea how to change my printer to default automatic double sided printing.  I found how to set it to default to manual two-sided printing (undesirable), but that can't be the only option???

    Sometimes Windows include the driver for your device, but it's a generic driver that might not give you all the features of the printer. I forgot to ask if you use Windows 7 x64 of x86, but you can choose the OS from the list using the link below and you should find the drivers from HP for your printer.
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3673587...»
    You also have a auto detect button using the link below that should be able to detect you printer and find the correct driver.
    http://www.hp.com/#Support
    You might give it a try with the driver from HP and see if duplex printing works better. Please post back and let us know if this solved the problem or not.
    -gan

  • How to do two sided printing automatically with HP 7520 printer

    All that I am trying to do is to make my printer do two sided or double sided printing.  No matter what I check IT DOES NOT WORK.  I checked "2-sided, 1 to 2, NOTHING.  What amazes me is that this worked until recently and now it just will not do double sided printing.  I am probably doing something wrong, but WHAT?
    This question was solved.
    View Solution.

    filgrastin
    Generally speaking, duplex printing is accessed / adjusted from Printing Preferences.
    If you are printing from within an application, for example, within Word or within your Browser, you might reach Printing Preferences from Print Preview.
    Reference:
    Manage Print Output with Print Preview
    Excerpted:
    Print Preview – Accessing the Printing Preferences
    Browser Page > File > Print Preview > Properties
    Properties Accesses Printing Preferences:
    Paper Source (Tray Selection), Paper Size, Media, Orientation, Print on Both Sides, Page Order
    Reference: Printing Preferences
    ================================================
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • How do I enable double sided printing on my iPad through the HP ePrint app?

    HP Laser jet 1102w
    I have Windows 7 64 bit and a original iPad.
    I would like to save paper when I am printing from my iPad. Is there a setting to enable double-sided printing when printing from an iPad using the HP ePrint app?

    Hi,
    Printing a manual duplex printing is not supported by the HP ePrint app or AirPrint as well, it can only be done with printers who provide automatic two-sided printing.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I stop two sided printing

    How do I stop two sided printing?

    Read the user manual that came with the printer, contact the printer manufacturer or post in their community.

  • How do I use the double sided printing with my HP Officejet 6500A plus

    I need help with learning to use the double sided printing with my HP Officejet 6500A Plus

    Click on the Show Details button just above:
    You can configure various options from the dropdown menu just below Orientation.
    Printing two-sided requires a two-sided adaptor for the printer. Otherwise, you have to print out odd numbered pages first, turn them over and reinsert into the paper feeder, then print even numbered pages. If you do it right you get a nice two-sided document. If you do it wrong all the even numbered pages will be upside down.

  • The print menu on my MacBook Air won't allow me to select two sided printing, how do I do this?

    Hi Community,
    I recently purchased a MacBook Air (my very first Mac) and I cannot access all of the printing options when I print.  I am able to print and the printer driver was downloaded, but my options are limited.  I cannot enable two sided printing, which is something I was able to do with my current printer via my old laptop.  I am in grad school and have a lot of journal articles to print and read that are 60-70 pages each.  I'd much rather print these two sided to save paper.  I have the latest version of OS X (version 10.8.5) and my printer is an HP Laser Jet P2035n. 
    Can anyone help me fix this issue so I don't have to use my old laptop to print?
    Thanks,
    Melissa

    Read the post by iron badger at the bottom of the page.
    Check out the last post by iron badger.  http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/LaserJet-P2035n-Doub le-sided-printing-Mac-OS-X-10-6/td-p/2359047#.UjybmBb3YzU
    Best.

  • How do I create a custom preset in my print window? I want to permanently turn off 2-sided printing under the Fiery Features?

    At my office I work on a mac, I print to a Canon C5240, my print dirver is current (Canon iR-ADV C5200s-B2 psv1.ous). We just got this new computer at our office and it defaults to 2-sided printing.
    The cannon people said we need change our printer setting on our sever to single sided printing, our IT guy says we have. However, we still continue to get all prints 2-sided.
    The only way we've been able to get around this is when we are in the print dialog: manually changing the page setting > Fiery Features > and turning off 2-sided printing-- every time. It's so frustrating.
    Is there a way to save this preset rather then have it always revert back to the default print settings?
    PLEASE HELP!

    Hello,
    Click on the Presets dropdown item, choose save as Default, Save As, or Maybe just Save depending on OS version.

  • How can I permanently disable double sided printing in Acrobat Reader 11.0.09?

    It is annoying to have to manually turn off double sided printing every time I print a *.pdf.  Is this fixable?

    Hi prtlaw,
    Are you still look for answer?
    These option are available with printer drivers. So, this is something you need to check from printer http://windows.microsoft.com/en-in/windows/choosing-print-options#1TC=windows-7
    Or change the properties of every document:
    Regards,
    Ajlan Huda.

  • Double-sided print no longer showing up since upgrade to 10.10.2

    Since updating to 10.10.2, I can't find the double-sided print option on the Print menu (single-sided print and copy have worked fine) for my Epson WF-3640.  I am upgrading again now to 10.10.3 to see if that helps.  Any ideas?

    Since updating to 10.10.2, I can't find the double-sided print option on the Print menu (single-sided print and copy have worked fine) for my Epson WF-3640.  I am upgrading again now to 10.10.3 to see if that helps.  Any ideas?

  • 7410 double sided printing

    Well here I am again with printing problems.
    I have a Mac Book Pro using OS 10.9.5, Mavericks. I managed to resolve my Print/Scan problem with Shlomil's help. Also, he helped me some time ago with a double sided printing problem. Now I find I have the same double sided printing problem but am unable to follow his advice (which fixed the problem last time)....
    Now, The two sided printing box does not appear on the print drop down menu! So, I went on to the following (using the last advice Shlomil provided)...
    "1. Verify the duplex-printing accessory has been installed properly. To verify this open the System Preferences and go to Printers & Scanners. Open the print queue of your printer. Click on Printer Setup and from the tab menu choose Driver. Verify the box next to HP Two-sided Printing Accessory (Duplexer) is checked."  
    However, when I select the "Open Print Queue" there is no "Printer Setup" on the tab menu. So, I can't verify the "HP Two-sided Printing Accessory (Duplexer) is checked " (unless I'm doing something wrong). I  and went on to #2. 
    2. On the File menu, select Print. The Print window appears.
    NOTE: The Print window might be minimized. Click on Show Deatils to see all available settings.
    3. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
    NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
    I skipped the above step since the two sided printing box does not appear on the print drop down Menu (and no expanded print window available).
    I  went on to #4.
    4. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    5. Select Layout from the drop-down menu.
    6. Set the Two-Sided option as Long-Edge binding (Portrait), or Long-Edge binding (landscape).
    Now, I don't show a "binding type" In the Layout" selection in the drop-down menu, etc.
    Shlomil suggested if this didn't work to reset the printing system. I'm really scared to do that because I have 3 printers and a scanner in different locations. When I selected the reset printing system the drop down said it would delete everything...all printers, scanners, faxes, etc.
     Is there any other less severe solution? I'm stumped! This all worked before (two sided printing, print/scan). The only thing I can think of is when I correct permissions or update to a newer OS.
    Please HELP! 
    This question was solved.
    View Solution.

    Well...I can't believe it!  Please disregard my ramblings.
    I mucked around in the printer stuff and in System Preferences "Printers & Scanners", selected "Options & Supplies"  rather than the "Open Print Queue" and then selected "Options". The  "HP Two-sided Printing Accessory (Duplex)" box was located there. It was not checked. Although I don't know how it got unchecked, I checked it and it fixed my problems.
    Thanks Again

  • HP Laserjet 1300 Manual Double Sided Printing with Windows 7

    I just purchased a new laptop with windows 7, love the interface but have some hiccups here and there.  And the one that is the biggest pain is printing.  I have a HP Laserjet 1300 connected via a linksys print server.  Single sided printing works just fine, but I used to be able to (and still can from my work laptop running XP and from my wifes Laptop running Vista Home) print double sided manually.  But now even though it says duplex, it will not work and I think the Windows Driver believes that it is a duplexer attached to the printer verses a manual feature.  Any ideas on how to get my manual double sided printing back?

    Nice one...
    I found you can also modify the "Manual Duplex Help" section to provide instructions to the user while duplex printing :
    The following prn_grp displays pictures similar to the Laserjet 1300 and has the right procedure (take the printed pages and place them in the same orientation in the tray) :
    <prn_grp models="HP LaserJet 1300;HP LASERJET 1300N;c5c5f890996e5fc5d7ffd96f8c759f2d ;555a2593970cf8b77ec5e1c722373e36 ;065e3643626aa153eb624120e21031cc ;5541b14acbc6bb39fefc0967181142e0 ;e6885ab28dbc6e127ae4963acf4d8ccc ;8f6b80f605bb593212acd699c0516d06 ;1d9e0f01c72b2d0001e58751826b42ac ;f77381023eb218bd6c75fbb5cd55337e ;8da5efe243e316c3fbd7ccd09d330f48 ;60caa8832f86a2502a3e4f31c6aa82f5 ;d1eb75d092f98ee058366d6d32b1c5d1 ;acb248ba464fba4feeac598ee070e4da;25b289c5a1af52c4c30c70e60d6a5486;
    5ad2ab06ec3d7c97c5236b04e461072d;a25c6f53a65697130a90c0bf48622fa1;835a8e29c28829102fb4dcccacf6c3dd;dc488b59d678f119ca11d4425e31bf36;b868c723ee9270bd0d70e96293adacf7;2a51e03acc06b149b4460fda9c7d4560;bb95bf471925e96c47a6a05d3252c357">
    <fname name="HPManualDuplexDialogItems">
    <option name="InstructionID_01_FACEDOWN-NOROTATE" value="BitmapID_227_StringID_3313"/>
    <option name="InstructionID_02_FACEDOWN-NOROTATE" value="BitmapID_505_StringID_3070"/>
    <option name="InstructionID_03_FACEDOWN-NOROTATE" value="BitmapID_231_StringID_3065"/>
    </fname>
    </prn_grp>
    More importantly, I was also able to modify the hpcu1306.xml file to enable full 1200 dpi support, by adding the following prn_grp at the end of the "Print Quality" section (after the hp LaserJet 9040 prn_grp and before the closing "</feature>")
    <prn_grp models="HP LaserJet 1300;HP LASERJET 1300N;">
    <fname name="PrintQualityGroup" default="PQGroup_4">
    <option name="PQGroup_2"/>
    <option name="PQGroup_4"/>
    <option name="PQGroup_5"/>
    </fname>
    </prn_grp>
    NB : PQGroup_2 is for 600 dpi, PQGroup_4 is for FastRes 1200 dpi (fast) and PQGroup_5 is for ProRes 1200 dpi (finer, slower, more memory used).
    The modified hpcu1306.xml file is available here : http://pastebin.com/6UxtcSaZ

  • HP LaserJet P1005 Two-sided printing not working on network

    Good day!
    I have a desktop, with Windowx XP, to which my LaserJet P1005 is connected via USB. My wife has a laptop, with the same Windows XP, from which she can print, but the two-sided option does not work right. She can check it and print, but the window to restart printing for the second side does not open and there is nothing we can do at this point.
    I have trie duninstalling the printer from both computers and reinstalling the newest drivers, it still won't work.
    Thanks for your help!

    I have an HP PhotoSmart 2575 All-in-One with the latest HP driver that displays the two-sided printing option greyed-out in the Layout window. According to HP, your printer must be capable of accepting an optional two-sided printer tray to work on a Mac. To me that is ludicrous since in Windows the driver supports manual two-sided printing.
    To get around this, I select the Paper Handling window and from the Pages to Print drop-down list select Odd only instead of the default All Pages. After clicking the print button the odd pages print starting with the last page and ending with the first. I then remove all paper and reinsert the printed pages with the top of the page facing the printer. First, though, I reorder the pages with the first page on the bottom and the last page on top. If the total number of pages is an odd number, I remove the last page from the inserted stack, as that is the very last printed page. I then select Even only from the Pages to Print drop-down list and click print again.
    Problem solved.

  • Two sided printing on macbook with hp officejet pro 8500a

    I've got a hp officejet pro 8500a printer installed on my mac os x but i cant find the option of automatic 2-sided printing. How to turn on this function/anybody knows ?

    Hello OLTO,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer going into sleep mode and not waking up when a print job is sent.
    This could possibly be a power issue or in a lot of cases, a lack there of.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I also suggest downloading and installing the HP Officejet Pro Firmware
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for