Auto batch pick in 201 movement type

hello all,
i want to pick batch automatically when we issue the goods to costcenter 201 movement type.
we already have 4 plants in which auto batch determination is already there.when we enter the * in batch field,batch is automatically picked.
all the plants have same configuration but only for one plant automatic batch determination for movemeny type 201 is not picked.
regards
sumit

Hi,
movement type also import for same
check following link
[http://forums.sdn.sap.com/thread.jspa?messageID=5907502#5907502]
Regards
Kailas Ugale

Similar Messages

  • How to set receiving batch mandatory in MIGO-mov type 303

    Hi gurus,
    We want to set receiving batch mandatory in MIGO-mov type 303.
    We already made this field (UMCHA) as Required in OMJJ under Field selection-Enjoy and Field selection (from 201)/Batch search procedure, but when do transaction, the field still not even appear. Can you help to know how to do that?
    Many thanks in advance

    Hello HongNguyen ,
    Please try the following customzing path in your system if you haven't already:
    - Transaction SPRO
       - IMG
         - Materials Management
          -  Inventory Management and Physical Inventory
            - Settings for Enjoy Transactios
               - Settings for Goods Movements (MIGO)
                  -   Field Selection per Mvt Type
    Please check your settings for Movement Type 303 and see if they are set to "Mandatory".
    I hope this information has been helpful.
    Best Regards,
    Frank

  • Full stock removal functionality for 201 movement type

    Dear Friends
    I am facing one problem with full stock removal. As per my requirement, system should remove full container to staging area there
    the requried qtty will remove and the remainging qtty goes to another storage type. When I post 201 movement type, system is not picking the full container.
    When I observe movement type it is using dynamic bin and I changed it to static bin and I created a bin in 911 and I did the positng it picking the full container.
    My question is, I chaanged in movement type and is there any impact for the same.
    Regards
    Raghu

    Hi
    The only impact I can think of is with the 'dynamic bin'setting the bin is the cost centre and with your change ALL of your Goods issues to cost centre will be in the same bin and so clearing these quantities out will not be so easy as when you create the TO to 'pick' the stock to clear it out it will not be able to pick the specific bin for the cost centre, However as all of tyhe stock is in the same 'bin' it should not be too much of an issue as it will jsut reduce the bin by the qty on the TO.
    It just means that if you want to report on the stock in 911 then it will all be inthe same bin and you cannot differentiate as to which material was put there by which cost centre
    Frenchy

  • Goods issueto any cost centre for 201 mov.type  using Transaction MB1A

    Hi all ,
      our user wants to activate Batch management indicator in material master , but there is stock in current and previous periods , so I suggested as GI the stock to any cost centre  for 201 mov.type in previous  and current periods , then mark the "Batch management indicator " in materail master and later cancel the GI  for 202 mov.type in those periods.
    But , now the stock in previous period is 3500 qty and Current period  is 3000 Qty . If the user try to issue the GI in previous period , system displays error message as "deficit of SL Unrestricted-use 500 qty"
    Please advise how to acheive this.
    Regards,
    Amara.

    start with a 202 and post 500 to your current stock.
    then do 201 to issue3500 in previous period
    then you set the batch management flag
    and do a 202 for for 3500 in previous period
    followed by a 201 to remove 500 in current period

  • Batch Creation or Batch Determination for 531 movement type

    Dear Experts,
    I have some confusion with Movement type 531 -
    1) Can we do Batch determination for 531 movement type.
    2)  Can we do the automatic Batch creation at the production order level or confirmation level. In this case i have done the settings but in confirmation screen i have to create batch manually through Menu Path.
    3) I have to enter characteristics value manually in confirmation screen as i have select classify batches in foreground. But in material master we have Batch Class type so can values comes from there to batch of confirmation screen.
    Thanks & Regards,
    Saurabh Kumar

    Hello
    Please read carefully notes 191368 and 194619. These are very old correction notes and they are already implemented on your system, however, they provide the following information about the system design:
    For a by-product or co-product, no batch determination is executed anymore. The subsequent stock determination is not executed anymore either.
    and
    No batch determination for by-products may be executed during the confirmation.
    It means that the batch determination for movemen 531 is not a functionality of the standard system.
    I have never tested this scenario, however, as far as I know, the batch can be created automatically for the by-product if you are using internal number range on OMCZ.
    BR
    Caetano

  • Make field selection for 201 Movement type for MB21 t.code

    Hello,
    I have making reservation through T.code..
    In that screen we have entered Movement type 201 in MB21 t.code  ,,it will show me two fileds
    G/L Account filed and Cost center..
    In that Cost center field is mandatory.....User told me to do the G/L account filed mandatory... how to do this....
    In filed selection there is only one fieled is the cost center....then there is no filed for G/L Account.
    Regards
    sapman man

    Hello,,
    For G/L account mandatory  ..in 201 Movement type.
    Go to  Spro-Inv ManagementGoods issuse/Transfer PostingSet manual account assignment---and Give + sign Infront of movment type 201.
    It will make the field G/L Account in MB21 201 movement type
    Regards
    Mahesh Naik.

  • Cancellation for 201 movement type

    Hi,
    We cosumed material for cost center with 201 movement type on 25.12.2009. Now we must send back to our vendor. But there is no stock in storage location. aA far as I know in this case there are two choıces:
    One of them is making cancelletion for material document. But the document date and posting date are not possible periods. Can we do cancellation for current date? Is it wrong for CO? Or what is the effect for CO?
    Second of them is making goods receips for 711 movement type.
    Which of them are more sutible for CO / this case? or what we can do? Are there another solutions in this case?
    Thanks.

    hi
    >One of them is making cancelletion for material document. But the document date and posting date are not possible periods. >can we do cancellation for current date? Is it wrong for CO? Or what is the effect for CO?
    in this case u can have two options
    open the previous period with MMPI and do the cancellation (search on net for MMPI),but in this case u have to discuss with ur CO and FI guys for the impact of reversal in past period
    also if the closings havebeen carried out there will be the balance of this stock
    another option is that use movement type 202 directly u will get back stock in current period

  • How ETT is picking based on movement type

    Hi all
    Please tell how Excise Trasction Type (ETT) is picked based on movement type?
    Also for Retrun delivery to vendor (mvmt type: 122) ETT picking is OTHR, if i want to make it to pick OTHR Sub trasaction type 10 how should i want to do it?
    Regards
    K.R.Srinivasan

    Hi,
    First of all ETTs are not picked up as per movement types. These are defined in SAP Standard program to be picked for different transactions.
    For e.g. GRPO for Goods Receipt against PO, DLFC for Outgoing Excise Invoice, OTHR for J1IS, etc....
    And it will not pick up the Subtransaction type 10 automatically during J1IS (or any transaction), you have to specify this manually during J1IS.
    For this you have to do necessary Account Determination for ETTs, Excise group and Subtransaction type 10
    Check in SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction
    And in SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction

  • 261&201 mov type

    Hi all
    Can anybody tell the basic difference  in 261 and 201 mov type. ie if I post a material in 261 and the same material in 201 what is the basic MM and FICO process difference occurring
    With Regards
    Arun

    Hi
    In SAP Materials Management, goods movement is distinguished using a three digit key which is called the u201Cmovement typeu201D. The movement type is important because it controls the screen layout, adjustment of inventories, the GL account for financial purposes etc. Goods movement have been discussed elaborately here.
    261 - This movement type is goods movement (goods issue )against the work order (maintenance order)
    201 -  This movement type is goods movement (goods issue )against the Cost centers
    According to above there is slight difference screens.
    I hope this will satisfy your query if not let me know.
    Regards
    Makarand

  • 201 Movement type

    Hi,
    while doing good issue via Mb1a we met the f"Fld selectn for mvmt type 201 / acct 417000 differs for Vendor goods movement (014)
    Regards,
    Renuga.A

    I assume " 417000 " is the G/L account. Go to transaction code FS00 , you can find field "Field status group" there under create/Bank/Interest tab. Double click on the field status group it will take you Display field status group. You can see" Vendor goods movement ". Check whether it is maintained as Supress/required/ optional entry.
    Go to OMJJ transaction code give the movement type " 201" and execute.
    In next screen double click on Field selection (from 201)/Batch search procedure ,select the movement type and go to details.
    Change the field selection Vendor goods movement as in G/L account.
    Problem will be resolved.
    However ask your FI /CO consultant to check it.
    Thanks & Regards
    Sudhansu

  • How to restrict the users not to change receiving batch no. in 305 mov.type

    Dear MM Guru,
    We are using mov.type 303 & 305 for transferring the materials from one plant to another plant. t.code is MB1B (Non split valued item)
    While receive the goods through 305 mov.type the user having the chance to change the receiving batch number. To control this changes, is there a way where we can restrict the users not to do the changes in receiving batch no. or can we do the GR with reference to the material document 303 mov.type.     
    Regards,
    Sivanandan

    Hi,
    Generally there is a possibility to change the batch no. If you want to restrict it means go for enhancement. Use BADI to acheive this.In  MB_MIGO_BADI you can set not to change the batch no. Hope it works. Thanking you.

  • 201 Movement Type Excise

    Dear All,
    I want to capture only Part I entries while doing a goods issue movement type 201 in MIGO.
    But when i select the option and put Classification type as IPD, then on check of document, the system gives me error to put Customer number and Excise Base Value is zero
    I want to know why these information are required while posting only Part I during in house consumption.
    Is this the standard working or am i missing out anything
    Regards

    Hi Amit  & all,
    Thanks  a lot for the reply .I have two queries here
    1) Could you please explain why we have to create Plant as customer .
    2) Excise base amount is coming as zero .What could be the reason.
    Please provide your valuable inputs.
    Regards,

  • CIN - Reverse part 2 entry for 201 movement type ?

    Hi
    When we withdraw raw materials for internal use from stock using movement type 201 , should we post a part 2 entry in the RG23A registar? If yes please let me know the process.
    Thanks
    Ganapathy

    Dear
    IF we are internally issuing the raw material to cost center .
    there is no need of reversing the part 2 .
    Regards
    Naveen

  • Restrict for movement type 201 by material typeu200F

    Dear Gurus,
    Can SAP restrict movement type 201 by material type?
    For example, Can i set authorization for 201 movement type to only material type UNBW material?

    Check this answered links
    Authorization check on movement of material type
    Material Type - Movement Type Link

  • Goods Issue not possible with ref to Reservation using 201 mvt type when reservation created by 311 movement type

    HI MM Folks,
    My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
    system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
    your help will be highly appreciable.
    Regards
    Vinay

    Dear,
    Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
    You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
    And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
    Regards,
    Pardhu

Maybe you are looking for

  • What format do I use to export a 100MB movie?

    I need to export my movie which is 20 minutes to 100MB I have tried to use the iPod format that gets me to 136MB but the program I am uploading to is very specific.  I have also tried a condenser which shortens it to 5minutes but it also has to be ex

  • Business products photos in Photoshop Elements 11

    I am a beginner with Photoshop Elements 11 but not with working with photo editing. At the moment I am at the beginning of an Adobe tutorial on Elements Organizer. There are four views: Media, People, Places and Events. I purchased Photoshop Elements

  • Uhhh... My iMac has no Video Card?

    So I bought a 20' inch 2.4 Ghz iMac with 2 GB of memory because I knew I'd be playing games... But I downloaded Aspyr's Game Agent and all games came up as unplayable because I had no video card........... Are you kidding me........?

  • I've lost my website address bar! How can a get it back?

    Safari is working perfectly, except I cannot see my website address bar, that's the one where you enter the address of a site beginning with www. Its just vanished. How can I get it back?

  • Data Centre Interconnection - firewall and load balancer deployment

    Hi all, I've read lots of Cisco docs/white papers on DCI - Layer 2 extension between DCs, but as yet I cannot find any decent information on how best to deploy firewalls and load balancers in such a design. I've seen refs to FHRP isolation on Nexus 7