Auto GR not happend while doing confirmation of process order

Hi
    while confirming proccess order as per control key settings , the finished good GR should happen automatically. But it was not happend as per the user comments. He done it manually. and also not reflected in COGI.
I have seen the display process order confirmations in CORT transaction, there i didn't find the ginished good. I am predicting user might have deleted the finished good (101 movement) in good movement tab while doidng confirmation. If so where can we find the deleted data ? can u tell me the table or info structure ?
best regards
sap

Hi SAP,
Go to t-code COOISPI, in the List filed select "Documented Goods Movement" select stand profile and then give process order number, this will list all the components which are consumed and confirmed material. Compare with Standard BOM and componets consumed, this will give you info of what exactly has happened.
Trust this should be fine...

Similar Messages

  • Order type is not picking while converison Plnd to process order

    Dear Dudes,
    i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
    thanks in advance.

    Robert,
    Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
    I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
    Regards,
    Prasobh

  • Warning message during batch determination while doing GR for process order

    Hi Experts,
    During delivery against process order for all SFGs and FGs, we are getting warning message u201CInvalid batch according to selection criteria in batch determinationu201D.
    Following settings maintained for batch determination in process order.
    Condition table for order/material type maintained
    Access sequence maintained for order/material type
    In strategy type above access sequence has been maintained. The common class and sort sequence created for all materials in the plant have also been assigned to this strategy type. In batch split changes allowed box has been checked and quantity proposal maintained as 1.
    In search procedure control maintained for order/material type. Search procedure has been assigned to all process order types and check activated.
    In spite of the above when GR for order is taking place , system is throwing warning message.
    GI of components is being done through backflush and without any warning message.
    Please advise how to ensure proper batch determination during GR against order.
    Regards
    Sm.

    Issue resolved by removing required indicators from characteristics which were not being valuated but were maintained in the class assigned to SFGs/FGs.
    Regards
    Sm.

  • Error while doing confirmation with cor6

    Dear PP gurus,
    I am getting following error while doing confirmation. please suggest.
    "Error while importing from memory QAPO SAPLQEEV
    0400000363"
    Thanks in advance
    Kailash T.

    Hi,
    The structure QAPO relates to Inspection operation records & the program - SAPLQEEV relates to Spec. tables for results recording. Hence would suggest to discuss this with your QM personnel.
    Also was able to find a link which had a same issue, but no solution posted, have a look if it helps in anyway
    http://www.sapfans.com/forums/viewtopic.php?f=27&t=173200
    Also refer to OSS note - 334400. If all the above does not resolve the issue, raise an OSS message with SAP.
    Regards,
    Vivek

  • Help While doing Confirmation"OPK4"

    Hii sir
    slight confused need help
    I have configured process order
    while doing confirmation
    i want that system should give error message if any shortage of material is there
    but this is not happening
    System is allowing confirmation with the message ,Goodmovements-0, failed 1
    Need hel\
    Thx Got the solutiion
    Edited by: Bhupendrasingh on Feb 7, 2012 11:52 AM

    Hello,
    In OPK4- second tab Individual entry general tick check box goods movement and termination for incorrect goods movement. Remember you have to do this setting for the particular order type for which you do not want to gave goods movement failed.
    Regards,
    Alok Tiwari

  • Condition for AED  maintained in Migo but not showing while doing miro

    Dear Experts.
    Please suggest,
    In PO AED conditon JMOP is not maintained, but it is maintained in the MIGO, and hence does not reflect while doing MIRO.
    How can this be rectified to pass the proper entry at the time miro.
    Regards,
    Charmaine

    Hi,
    Check the difference of  condition types you maintained in Excise defualts place.
    SPRO>Logistics general >>Tax on Goods Movements>>India>>basic settings >> Detrmination of Excise duty>>Mainatin Excise defalts..
    I think you missed the A/P AT1 cond type maintained in Excise defaults.
    Check the scenario as per my [revous mail , that is Excise is coming or not at the time of Excise capure.
    Regards,
    Andra

  • Balancing field "Profit Center" not filled while doing F110

    While posting document  there is no error where as while clearing the document through F110  the error is shown as
    "Balancing field Profit Center not filled " while doing F110.

    Hi,
    There could be various reasons why this error would come.
    1. Check the settings for the new GL.
    2. In particular,Check the configuration for classify GL accounts for document splitting and classify document type for document splitting.Also check config for zero balance clearing account.
    3. Analyse the error on which line item the PC is not being filled.
    Thanks
    Aravind

  • CO-PA document is not created while doing the sale order cycle

    Dear Experts,
    I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
    I’ve carried a standard sales cycle that contains sales order (VA01),
    and (VF04,VF02). System should generate 4
    documents as follows
    1) FI Document
    2) CO Document
    3) Profit Center Accounting Document
    4) COPA Document
    But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
    In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
    Please suggest me where i miss the settings..
    Regards,
    Krishna.V

    Dear Ajay,
    Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
    I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
    Hear we maintained all gl's chart of acc level and cost elements also.
    Please suggest me...
    Regards,
    Krishna. v

  • No FI document generated while doing GR for Production Order in MTO Scenaro

    Hi All,
    In material master the strategy group is 20.No FI document generated while doing GR for Production Order in MTO Scenario. Then strategy group changed from 20 to 50 but still No FI document generated while doing GR for Production Order in MTO Scenario.
    Could u please let me know whether FI document is generated at the time of GR against production order in case of MTO scenario.
    Regards,
    Nandan.

    Hi,
    While doing GR with ref to Production order check whether price is picking up or not for the production order.
    Regards
    Ravi Shankar.

  • While doing 3rd party process,  So, how system will pick the vendor?

    Hi  SAP SD Experts,
    while doing 3rd party process, at the time of creation of sales order system automatically creates Purchase Requestiion with   reference to this Purchase order will be created while creating Purchase order system automatically picks the Vendor?
    So, how system will pick the vendor?
    where we do configuration for this?
    please help me out.
    Thanks & Regards,
    Nivas

    HI
    Based on the source List , Check with MM Consultant for better understanding the Source list concept
    and also check the below links
    [About the Source List Determination|http://www.sap-img.com/materials/about-the-source-list-determination.htm]
    [Inforecord and source list  |Inforecord and source list;
    Regards,
    Prasanna

  • Time ticket confirmation in Process Order

    Hi All,
    I am working on 6.0
    While confirming a process order with COR6N, I have set error in case operation sequence not adhered in OPK4. but while confirming if i do not adhere the sequence still it is not giving error.
    What may be the problem ?

    Hi,
    Please also check with ur control key assined to operation , if it milestone confirmation system will give error message .
    Regards
    Pradeep

  • Confirmation of process order create : goods movement

    Dear Sir/Madam ,
             I am using the Transaction Code - CORK for confirmation of process order , but promblem is that when i am saving the goods for confirmation then material pi101 has some error i.e the material pi101 is locked by another user or something , then that is not confirmed but rest of the material which are having 531 movement are confirmed ,
    so i want that if the first material i.e pi101 which has 101 movement that should be confirmed first then after that rest of the goods having 531 movent confirm,
    i have already  searched the userexit for transaction cork i.e CONFPI05 when saving the data and another one is CONFPI06 for   Actual data transfer plz tell me what will be the logic and which structure to call in this userexit because in this userexit the structure which is present is not of use .
    thanks and regards ,
    arun

    Hi,
    I believe you would need to append the below line for your code for goods movement.
    wa_timetickets-order_itno = p_itno.  " Order item nos.
    Check & revert if it resolves the issue.
    Regards,
    Vivek

  • Progress confirmation for process order

    Hello to all,
    I want to use the progress confirmation functionality for process order. I know that it is possible for production orders, but I couldn't find respective transaction for process order. Do you know if it is possible to use progress confirmation for process orders.
    BR,
    Nikolay

    Thanks for your inputs, but they are not useful!
    COR6 - it cannot be used once the order is confirmed at phase level;
    COOISPI - it's a report
    COR6N -it is the standard transaction for process order confirmation
    I want to do so-called "unplanned milestone" for process orders, something similar to CO1F for production orders.
    BR,
    Nikolay

  • Collective confirmation of process orders

    COR6N - Confirmation of Process Orders phase  wise
    But i need the tcode to confirm all the phases of process orders at one stretch.
    Also tell me tcode to do collective confirmation of process order

    Hi,
    Pls Try CORR for Process order,
    CO12 for Production Order
    Regards,
    Pavan

  • Milestone Confirmation for Process Orders

    Hi,
    We are using PPPI and I am trying to perform a milestone confirmation for phase (COR6).  Although it is working without errors, it prompts you for which phase to confirm. 
    In discrete PP, you set up milestones, and when you go to CO11 - confirm operation, the system automatically goes to the details for the first milestone operation.
    Is there any way you can do this with proces orders for COR6, ie automatically go to the detail screen for the milstone phase?
    Regards,
    Fotini Delgado

    Hi
    u can use t; code COR6 : confirmation of process order
    we can enter operation number (same as final one )
    so we can directly confirm last Phase
    or
    We can use
    CORR : for collective confirmation of process order
    or
    CORZ : confirmation : for time event
    please tell me if u have any more question
    Thanks
    Sunil Singh

Maybe you are looking for