Auto load of vendors

Hi every body,
Can any one help me in solving a problem to auto load of vendors from one organisation to another,
thank you,

Hello Sunder,
What do you mean by auto load from one organization to another? Please provide additional information.
If you mean that you already created vendor data for one purchase organization and wanted to extend for another pur organization, then there is std LSMW object is available for creating vendor master data. but this is not automatic, you need to provide the data.
If you mean updates from legacy system to SAP system, in that case also you need to provide the IDoc/flat file which will upload data in SAP system regularly.
Arif Mansuri

Similar Messages

  • How do I stop last web pages from auto loading in Safari?

    I find the feature of Lion that auto-loads previous web pages (and previous open applications) annoying. I want to stop this function. I see the checked box that asks if I want to re-open applications when logging out but I want the default to be to NOT re-open the apps. I equally dislike the auto-opening of previous web pages in Safari. I know that I can clear my history but what I want is for my homepage to open when I run Safari and not the last page viewed. Any solutions?
    Found this for Safari in the forums...
    Go to terminal and type in the following:
    defaults write ApplePersistenceIgnoreState YES
    If you decide that you rather have the new resume behavior, execute the above commands but change YES to NO.
    You can also do the same for Preview:
    defaults write ApplePersistenceIgnoreState YES

    iDrifter: The full command is:
    defaults write ApplePersistenceIgnoreState YES
    I was having the same problem and this is what I did:
    1) Closed Safari
    2) Changed the setting (mentioned) above in System Preferences
    3) Enter the "defaults write ..." command into Terminal.
    Now whever I launch Safari it does not load any pages.

  • Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

    As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

    Ok, no problem i found this help articles:

  • PDFmaker addin will not auto-load to Word

    Using Office 2013 and Acrobat Pro 11.0.08. Until this week, the PDFmaker add-In was always enabled in Word. Then there was an error doing a merge to PDF.
    Now every time I start Word, PDFmaker shows as inactive ("load behavior: unloaded") until I go to File | Options | Add-Ins and check the box to load it. Then it works fine until I close Word and have to do it again.
    How do I get it to auto-load?? I can't find a place to set that.

    You can solve this problem by editing the "LoadBehavior" registry entry.  The value needs to be 3 (load at startup).
    With Office 2013, that registry key is at
    One note - the Add-In was loading when I ran as the administrator but not when I just opened a Word doc.  I checked this same registry key under HKEY_LOCAL_MACHINE and it was set to 3.  I am guessing that is why it worked when run as administrator.  For some reason the LoadBehavior key had been revised to 0 on my HKEY_CURRENT_USER registry key.
    Nevertheless, the fix above will work because I just tried it out on my machine and another here in the office which had the same issue.

  • Tape Auto-loader Recommendations

    I have an Xserve RAID that has grown to about 1 TB of data. Currently I am backing up to single SDLT drive. A full back up, which I do weekly, takes about 4 or 5 tapes. I'm thinking it is time for an auto-loader (tape library). I'm looking at the Exabyte VXA-320 PacketLoader mostly because of its $2,300 price tag.
    Has anyone had any experience with this device? Are there any other devices that I should be looking at?
    Powerbook G4 1.5GHz   Mac OS X (10.4.5)  

    I'm a little surprised at the media costs of SDLT vs.
    VXA, although I've not spent much time looking at VXA
    so you're undoubtedly correct.
    I was looking at the media prices for SDLT 600 ($100) vs VXA ($60). Currently, we use SDLT 320. I was enticed by the SDLT 600's backwards read compatibly. But the SDLT 600 has the highest tape cost.
    I think I'm going have to flip a coin to choose between the LTO-2 and LTO-3. The LTO-3 tapes cost twice as much as the LTO-2. However the LTO-3's hold twice as much as the LTO-2's, so the tape cost is a wash. The LTO-3 drive is $1000 more than the LTO-2.
    Choices, Choices, Choices...
    Powerbook G4 1.5GHz   Mac OS X (10.4.1)  

  • Stop auto load of account information on Skype new...

    How do I stop my info from auto loading on a skype reinstall[ New ]
    2 minutes ago
    I am selling my laptop -
    I have installed Skype and installed it fresh.
    Unfortunately every time I go thru the process, the re-installed Skype also includes my account and all my contacts.  
    How in the heck can I stop this from happening??????

  • Auto Email to vendor for followup balance quantity deliver

    Hi All,
    Auto Email to vendor for followup balance quantity deliver,
    I have an requirement that Auto email to vendor for reminder with some fixed days (example : 10 days),
    Please suggest me any configurations for this and suggest me how to proceed on this..

    You can use Urging Reminders to supplier with output type MAHN.
    Here you set all the reminders to vendors based on days set up earlier then delivery date or 10 before delivery date 5 days before delivery date.
    Refer the below docs it may help you..
    Output message type MAHN Dunning - ERP SCM - SCN Wiki
    Reminders and Urging Letters (Expediters) - Purchasing (MM-PUR) - SAP Library

  • Safari will not Auto load username password

    This is very strange,
    All my websites will load my username and Passwords except for my website with
    I double checked to ensure that my username password is in profile and it certainly is.
    What can I do to fix my username and password auto load for my trading account, please

    I cleared my Cache and did a Safari Reset.
    And I still have the same problem.

  • Will not auto load gotomypc

    gotomypc is asking to install java to auto load gotomypc site. Java is already installed and if I try to install again I will get error 1016
    pc vista 64

    I cleared my Cache and did a Safari Reset.
    And I still have the same problem.

  • MupdfPage: an add-on for mupdf for auto-loading/saving page numbers

    I love MuPDF, but it doesn't store page number before you exit as other viewers do. I wrote a new header 'pdfpage.h' under the 'apps' directory and hacked 'pdfapps.c' a bit so that now it auto-saves and loads page numbers. The hack is based on a svn version, which keeps changing and makes patching hard, so I put my hacks in the README.txt.
    The source can be retrived here:
    To use, clone latest source:
    git clone git://
    drop 'pdfpage.h' into apps directory, and apply the 4 changes in 'pdfapps.c'.

    Check out llpp and zathura. The former uses mupdf to render PDFs, the latter can (with a plugin). Both are very fast (llpp just FLIES), and have that auto-loading/saving page numbers. And, zathura has genious keybindings.
    But cool project. Thanks.

  • TMW: auto loading employee list in time data screen

    Hi all,
    Within TMW one can have an employee list.  I'd like to get the employee selection auto loaded in the time data subscreen.  Without double clicking on the employee selection or using the button "copy selected records".
    Anyone have an idea how to do this?
    Please help!

    Thanks for the feedback.  I don't think i was clear enough, sorry.
    The problem i have is in the Time Manager Workplace.  There a user gets an employee selection (we are using the multiple persons view btw).  If the user wants to register absences for his/her crew he still needs to transfer his crew members to the time data screen.
    Standard only the first person of his crew is transfered.  It would be really helpfull if his complete crew was transfered automatically.  So he starts TMW and can immediately start registering absences for his crew.
    BTW thanks for the quick response!

  • HP8600 Auto Load Tray for Fax

    I use the HP8600 Officejet Pro Premium. The auto load tray is reliable anytime I use the scan or copy feature.  There is about a 25% success rate with the same auto load tray with fax attempts.  Any advice or support would be very much appreciated.

    Hello csc05c,
    Welcome to the HP Forums.
    Typically when you have issues with the tray or the hardware on the printer, it is usually a power issue or a lack there of.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Try having it connected to a wall outlet for a few days and let me know if any change takes place.  If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Auto-load program at startup query

    Hi all.
    I have the app, Sparrow, which is downloaded from the app store, installed on my Mac. I have it in my startup programs so it loads automatically. However, it is a little annoying when the window automatically opens also.
    So, I'd like to know if it is possible to auto-load the app without also opening the window, so it's just open in the background?
    Thanks for all the help.

    Can you tick the box to hide it in this preference pane?

  • Auto-load tabs ?

    I've successfully auto-loaded my tabs, but is there a way to auto-load "Top Sites" also into a new tab? (I know I can set any newly opened tabs to load "Top Sites"). I am so lazy that I can hardly bring myself to type command-T. Any good way to do this?
    In other words, I want the browser to open with tabs for site A, site B, site C, as well as "Top Sites". I can do A, B, and C, but Top Sites doesn't seem to have a conventional URL.

    Same q

  • Auto load and show subtitles in kaffeine or Kplayer

    I am trying toget these 2 to auto load and show srt subtitles. but they are not behaving well.
    Can someone help?

    Ignore this, its working.

Maybe you are looking for

  • Showmount: HOSTNAME: RPC: Program not registered

    I am new to solaris. I have solaris 10 installed in one of my machines. When i try to list the remote mounts using the command "showmount", i am getting the error "RPC:Program not registered" . I am not aware of which services i have to check/start t

  • Proxy Service JCA AQ Adapter. Queue retries doesn´t work

    Hello, i have to integrate two applications by calling a WS with data coming through an AQ Queue. My OSB version is 10.1.3. The steps followed are: 1) Created a QUEUE with 5 retries and a retry delay of 1 minute. 2) Created a AQ Adapter in Jdeveloper

  • Is there any documentation concerning Contribute and Windows 2008 x64

    I have the impression that it may not be posssible to use Contribute on Windows 2008 x64 Enterprise server. Has anyone had any luck? thanks

  • SYNC HELP please

    Yesterday I had to reload windows on my PC. I lost everything. Today my computer is working fine. I have downloaded the latest iTunes, and was ready to sync. When I did, I lost all of the APPS that I had. both purchased and free ones. about 9 pages o

  • IDE developing JSP And Hebrew  Encoding

    Hi. I�m using Sun One Studio 4 CE. I�m new Java Programmer. I create JSP that use Taglib and read XML file written in Hebrew (Encoding iso-8859-1); When I run the file on a Tomcat I have no problems. But when I run the file within the ide of Sun One