Auto numbering changes when the font size changes

Help.
I get files made in InDesign CS4 that have paragraph styles assigned to create numbered lists within the body. They are fine as they are when they are opened.
When I make changes they often- not always- change to 'continue from previous number' instead of staying 'start at 1'. The changes I have make are to change the document size, the font size and the margins.
Is there something I am doing that allows them to change, or is there something that I can do to keep them from changing?

Hi,
Your doubt is not yet clear.
I think u have not used smartstyles just changed the Font.
To Test it if data is not coming from driver program,then just excute the smartform-(Press F8) .
The Print Page will be seen to you.
Accordingly you can undrstand whether it is decreased or not.
Affable,
Arbind

Similar Messages

  • When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

    When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

    FingerPrint is not listed as supported on this page: AirPrint Basics
    You might check with the makers of FingerPrint.

  • How do I change the font size of a document when I PRINT?

    How to I change the font size of a document when I print it?

    To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
    First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
    Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
              - Dov

  • I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently.  And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing.  what am I missing?

    I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently.  And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing.  what am I missing?

    You can type the email using what you set in preferences and then highlight the text and use command - minus sign (or command - + for larger) to reduce the size of the text.
    You can also type command - T and a window will appear allowing you to select fonts/sizes/color/ background highlight.
    The above works in Notes also. I haven't tried to do this in any other Apple application.
    For incoming emails, you can use the above to reduce font size, but I don't know of a way to permanently set the incoming font size to a default.

  • How do I change the font size of the "typewriter tool" when filling out a form?

    How do I change the font size of the "typewriter tool" when filling out a form?
    == This happened ==
    Not sure how often
    == The typewriter tool works, but the font is very tiny.

    You can set a minimum size for the Monospace font:
    Tools > Options > Content : Fonts & Colors: Advanced > Monospace

  • Why does the font size change unexpectedly when I use the touchpad with my new HP laptop with Windows 8?

    Frequently the font size will change when the touchpad is touched. This is annoying! Is there a setting adjustment I can make to keep this from happening?

    This is very experimental, but since no one else has replied...
    I'm not sure which computers are affected, but Firefox has some support for touchpad "gestures" on multi-touch touchpads. Most of the ones that affect the zoom level of the page are the "pinching" gestures, like a smartphone screen. However, it seems that by default a "tap" will reset the zoom level, and that might be the problem here.
    Could you try this?
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''gest''' and pause while the list is filtered
    (3) Double-click '''browser.gesture.tap''' and change it to... I'm not sure whether there is a command for "do nothing" but you could try typing or pasting in '''cmd_selectNone''' which cancels the current text selection in the page (if any).

  • Changing the font size when sending email out from the iPad with MobileMe

    Is there a way from the iPad, or from my MacBook to the iPad, that I can increase the size of the font when typing outgoing mail? I use MobileMe on both my iPad and MacBook. My sister has cataracts and she needs the type size larger than what is already set on the iPad outgoing mail. I can make the type size larger for my incoming mail - I guess I did it through iPad settings -but I can't seem to figure out how to make it larger for my outgoing mail. I would prefer to be able to answer her on my iPad than having to switch back to my Mac each time she writes. Thank you.

    I guess what I am looking for is a toolbar when I am sending email so that I can change the font size, change the typeface, make words bold, underline them
    I don't think you will find any app that does that, it's the kind of feature only Apple can add. You can tell them here:
    http://www.apple.com/feedback/ipad.html

  • IBook App shuts down when trying to change the font size

    Hope sb can help
    when I open a book/pdf, the font size is very large. When I try to make them smaller  (menu), the iBook App just shuts down.
    I tried a hard reset of the iPad ... still the same problem. Did sb experience the same problem? Tx!

    This happens only because ios 6.It has bugs.You try to restore and if it did not work just try to downgrade it to ios 5.1.1

  • Can we change the font size of (none) style in RH8?

    In RH8 when you add bullets, numbers or a new row to an existing table the style immediately to (none).  And (none) is 12pt.  Our "Normal" is a 10pt....and the font size does NOT show in the editor for (none)...only in Preview or compiled webhelp.  So many people are missing that they have a (none) applied somewhere in the topic until its in Production.
    I can't find (none) in the stylesheets and it doesn't allow me to select and edit it.
    Is there a way to change the (none) size font to Arial 10pt?  The Arial seems to hold from Normal to (none) but the 12pt is killing us.
    It would be nice if it would keep the Normal that was origionally applied...but if I can force 10pt life would be much, much simpler.  ??
    THANK YOU for your creative answers!!!

    Hi Teri.
    You certainly can change the "None" style but I think it is not good to leave text in topics with no style assigned to it. When assigning things like bullets using the formatting toolbar icon it applies a "None" style forcing you to select a style (e.g. Normal). See here for further details (look in the RH8 section).
    If you want to change the "None" style, expand the "Other" styles section of your CSS file. In there is a "Background + Text [Body]" style that can be changed. It is this style that is used by the "None" style.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • How can I change the font size on the post of WordPress?

    I have found three websites which address WordPress style sheets:
    Playing With Fonts: http://codex.wordpress.org/Playing_With_…
    Font Size and Color: http://en.support.wordpress.com/editors/…
    How to Change Font Size In Wordpress: http://www.ehow.com/how_5469172_change-f…
    Here are the instructions from the third website above:
    Things You'll Need:
    Site designed in Wordpress
    Administrator access
    Step 1
    First, to change the font size on a Wordpress site you need to log into the site as administrator. If you do not know how to reach the login page, simply add "/wp-login.php" after the "www.url.com" address. Then login using the admin sign in.
    Step 2
    Next, get to the Wordpress file editor by going to Appearance->Editor.
    Step 3
    Once in Editor, identify the Stylesheet file (style.css) and click to edit. This is usually located on the right hand side under the "Styles" heading.
    Step 4
    Once in the style.css file, you want to conduct a search for "fontsize". This parameter is used throughout the style.css file and is the parameter used to control font size. Next to "fontsize" you will see something like "16px". Simply increase or decrease the "16" to change font size. The tricky part is to figure out which "fontsize" you want to edit.
    The way to do this is to first look at the heading it is under. If it is under "comment-template", it is obviously related to either the font size of the comments themselves or perhaps the comment form or the date/time stamp of the comment.
    It may take a little trial and error to find the right "fontsize" to modify. Simply modify the one you think is correct and in a separate window, reload the page with the font you are looking to modify. If it did not change, undo the previous edit and try a different "fontsize".
    I went to the Dashboard and clicked on the “Appearance” icon on the left-hand side, and then clicked on editor. I clicked on Stylesheet (style.css), but I have not been able to find the “fontsize” that would change my post font size. As the author writes: "The tricky part is to figure out which "fontsize" you want to edit." Some of the font sizes are given as a percentage, and I don’t know if these come into question, i.e., if I should try changing one of these to see what happens.
    The end result is that I still have not been able to change my post font size, other than by using the Heading-1-through-6 option, which, I understand, is not the best way to do it.

    From John Waller: “If you're using IE8, hit F12 to launch Developer Tools which give you a point and click method of locating the relevant CSS rule on screen.”
    I have Internet Explorer 8 (IE8) so tried this method.
    This sounded like another promising possibility; however, I have not been able to change the font size in my post using this method.
    I have gone to Dashboard > Posts > Edit > then moused-over my post > clicked on "edit" and then hit F12. An enormous amount (20 pages or more) of CSS appears. I tried picking out the font size that I thought pertains to the post (under Text Area), and I have changed the font size from 13px to 24px; however, I have not been able to “save” the new setting. When I go back to it, it is back to 13px.
    As a result, I have not been able to use a trial-and-error method to establish which font size I must change in order to change the font size of my post.

  • How can I change the font size of an outgoing instant message using Applescript?

    Text copied into Messages.app from a web page is often too small to read. Is there a quick way to boost the font size using Applescript?

    HI,
    I have spent some time looking at the Mix Message Case.scpt in Hard Drive/Library/Scripts/Messages and also Crazy Message Text.scpt in the same Scripts Folder but then the Mail one.
    Both are Apple versions.
    The Mix Case one is set in Messages > Preferences > Alerts
    Set the top drop down to Sent Message
    Enable the Applescript items and chose the Mix Case item.
    It will look something like this in the current Font and size you have set.
    ThEn aGaIn
    Obviously you don't want all the bit to make the font change between upper an lower case but it does have the option to use it with the Sent Message and it also uses the entry in the text field as a String.
    The Mail Crazy Message one  opens a dialogue box when run.
    it has a default phase and some Upper and lower limits to the size that will be used.
    the Dialogue allows you to change the phrase and also "Set Prefs" to altert the font sizes.
    The result is a text palce in a new Mail items and the font and size changes to look like this:-
    Picture
    It will look different everytime and the Font for each character  and the size of each is randomised.
    Although I have tried sticking in a line to change the size to anything other then my set font in the Mixed Case one I can't get it to work.
    In some cases I get an Script error in Messages  (It seems to think I am setting a Font called "10")
    At other times it just says it can't set it buit still does the Mixed Case bit.
    My hope was to change the size and then reduce the requirement for the "intercaps" routine.
    I have other emails about new posts so I will anwser them and then spend some more time on this.
    9:01 PM      Thursday; June 13, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Is there a way to change the font size and color of text in the calendar app?

    Does anyone know a way of changing the font size and color of text in the calendar app that comes with the iPad 2?  It is very hard to see the small gray numbers on the calendar.  Thanks

    Looks like you didn't get a reply on your post, but it is still a problem.  Font size is supposedly changeable via "Accessibility" in Settings, but it doesn't work.  You can turn on "Zoom".

  • Is there any way to change the font size of the text in the Finder Sidebar?

    This may sound like a bit of a dorky question but here goes nothing...
    I am rather near-sighted and in need of new glasses but I am stuck in a holding pattern until I can get a referral to see my eye doctor. Anyway... I have found myself using the Zoom features far more often and increasing the font size in the Finder for the Item Names & Info.
    The problem that I am facing now, is that the font size of the text in the sidebar is FAR SMALLER than the font size of the text of the actual file names & info.
    +*IS THERE ANY WAY TO INCREASE THE FONT SIZE OF THE TEXT IN THE SIDEBAR??*+
    So far I have looked in:
    *The Finder Preferences
    *The Desktop Preference Pane
    *The Appearance Preference Pane
    *The Seeing Tab of the Universal Access Preference Pane
    And to add to my frustration I have also searched the Mac OS X Help AND all of the posts in this thread (back to 1/1/09) that had the word "sidebar" mentioned in them!!
    +*DOES ANYBODY HAVE ANY OTHER IDEAS?? OR IS THIS ONE AREA THAT I AM OUT OF LUCK BECAUSE APPLE DIDN'T FORESEE THIS ISSUE??*+
    Usually, Apple is really very good about foreseeing any possible trouble (ESPECIALLY when it comes to the area of Accessibility for people w/ disabilities!!)
    I do hope that SOMEBODY can help me on this one!!
    Also, I noticed that the size of the text that is on the Toolbar is also the same ITSY BITSY font size as the text on the sidebar, but I am guessing that there is next to nothing that can be done about that!!
    Thanks a Million!!
    +~Kathryn A.+
    P.S. Here is the link to a screenshot that I took that will illustrate my problem more clearly...
    Icon View Screenshot: http://screencast.com/t/gzDONwN3

    Hi! The only way I know of is changing the screen resolution. Tom

  • Why Acrobat x professional is changing the text formatting specifically the font family  and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exact

    Why Acrobat x professional is changing the text formatting specifically the font family  and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?

    I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
    Regards
    Mike

Maybe you are looking for

  • Sound drops off after 15 minutes after upgrading from windows 7 to Windows 8.1.

    I upgraded my PC from Windows 7 to Windows 8.  Then, from Windows 8 to Wimdows 8.1.   When playing a Movie I've downloaded from iTunes it plays normally for a good while.  Then, after 15 minuites or so the sound drops off. If I close and reopen iTune

  • Play mp3s directly from Zen Micro on the

    Hello everybody, i just bought me a subnotebook with a small harddri've. So installed the Zen Micro software and my idea was that i simply hook the player up with USB and play the mp3s on the PC directly from the Player. So i don't have to copy them

  • 945GCM5-F V2 Load BIOS Defaults?

    Hi, Used 2 of these 945GCM5-F V2 in new system builds. They have both been fine for a week or so but recently both of them stopped at the Post BIOS screen and asked to Load BIOS defaults or enter BIOS to enter settings? I'd already set the BIOS up ac

  • 10g Listener spawns 2nd Listener

    Search Fu not good. Have any of you experienced a listener spawning a 2nd. listener? Solarius box - two listener processes - one owned by the other. Customers started getting tns time out errors. Thanks,

  • PLEASE HELP!  Converting numbers into real words

    I am faced with a problem. I need to create a prorgram that will convert a number ex. 156 into the word "one hundred fiftysix" This program will need to handle numbers up to 999 999 999. If someone has a program similar to this or is willing to assis