Auto-rotate function disabled with v20 update on N...

Has anyone who's updated to v.20 on the N97 experienced a disabling of their auto-rotate functionality. I've been looking for some info on this but am not getting much on it. I know two peope who updated and the feature has literally vanished from the handset. Any advice or suggested fixes?
Solved!
Go to Solution.

Can you not find it under
settings > Phone > Sensor settings > Turning Control? If you can't find there then maybe reinstall the firmware.
Good luck
Message Edited by phatdumi on 03-Nov-2009 11:53 PM
Hit Kudos if I Helped out.
Nokia 3310-> 8810->N95->N95 8Gb->
Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

Similar Messages

N95 & Auto-Rotate Function in V21.0.016

Wife & I both have new N95's RM-159 from 3.
Firmware Version is V21.0.016 as mentioned in subject line.
What neither phone seems to have is the auto-rotate function. After hours of searcing I've been unbale to find out why with this version of the firmware this isn't supported on these phones. Under Display settings no mention of auto-rotate. I've checked software updater & am told the FW is the latest revision.
Do I need to install the accelerometer plugin to get this function to work as you have to do with rotateMe(c)Samir?
Any help would be appreciated before I ring 3 customer services and ask them why it isn't supported.
TIA.

Your phones are normal.
The N95 doesn't have that function as part of it's firmware. Only the N95 8GB has had this feature added in the v20 firmware.
The firmware on the N95 is not the same as the firmware on the N95 8GB.
It is rumoured that the feature will be in the next firmware release for the N95 which is due in the next few months.
So the only way to get auto rotate on the old N95 is to install a program like rotateme.

Yoga 13: HID Sensor Collection : Auto-rotate functionality

Hi Guys,
I bought the Yoga 13 with Windows 8 but the non pro version. I wanted the pro version on so I can connect to a domain so I did a clean install - where I deleted the partition with the old OS.
Everything went great and all drivers that were are on the other partition that I left alone installed fine.
Here is the problem: I noticed that the auto-rotate functionality no longer works. After doing some research I found that the HID Sensor Collection is what controls this. If I look at the device manager I can see that their is a exclamation point next to the HID Sensor Collection Driver along with the Light Sensor driver.
They both give me the error:
This device cannot start (Code 10).
The process hosting the driver for this device has terminated.
I tried uninstalling and reinstalling the driver - this didn't help.
I've tried searching for this driver online - no luck.
I tried using the "update driver software" and it says: Windows has determined that your driver software for this device is up to date.
Any ideas how I can get the HID Sensor Collection working?
Thanks for your help!
Solved!
Go to Solution.

I had excatly the same problem after Windows 8 Pro N 64bit install, the device manager showed HID Sensor Collection and Light Sensor with exclamation points.
I found out that this might have something to do with Windows User Mode Driver Framework, Windows Media Player contains and utilises it. As Windows 8 Pro N didn't contain Media player, I downloaded it as Media Feature Pack from http://www.microsoft.com/en-us/download/details.aspx?id=30685. After the install HID Sensor Collection and Light Sensor were fine. Also Simple Device Orientation Sensor appeared.

X220T model 42962YU - is it support auto rotate function - win7

I just received second hand laptop with valid warranty, however I tried to do all possible way to update all the drivers but the auto rotate function is not working.
I send it to local lenovo support authorized workshop and they said the auto rotate function is not supported.
can you please confirm the same?
Regards

auto rotation function is supported in windows 7. My X220t and X230t can all autorotate in windows 7.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Wifinder app disabled with new update

After updating to 3.0 the wifinder app stoped working. Apple removed this app from the app store now they disabled it in this update. How do I go back to 2.2?

This is how it works in the new update when it comes to auto rotation. I'm not sure but there might be some 3rd party app that have the function you are looking for. I will pass on your feedback internally.
What are your thoughts about this forum? Let us know by doing this short survey.

Auto rotation is disabled

my auto rotation on iphone4 is disabled and i dont know how can i resume as before?
that is why i want to upgrade an application and before it installed i open that app and this app is hanged and my rotation is disabled

You would not have to delete "300" apps to delete 1 hidden. You delete appa one by one until the overflow app you want to delete shows up on the home screen. How many that will take depends on how much you over-stuffed your phone with apps. If you had read the User Guide and not over-filled your phone, you wouldn't have this problem.
You may not have to delete any apps at all. From what you're saying, it doesn't sound like you've creates any home screen folders. You can make folders by category and put up to 12 apps in each folder, multiplying the home screen capacity by 12. You the can have up to 2116 apps on the home screens. You REALLY NEED TO READ THE USER GUIDE!

Will not auto rotate in words with friends

won't rotate in words with frieds

You'll have to take that up with the WWF developer. It's not on Apple to make their stuff work with other companies, it's on the other developers to make their stuff work with Apple. So WWF will need to fix it.
You best answer would come from them.

Generic extractor based on specific function module with delta update

Hi everybody,
I'm trying to create a specific extractor using a specific function module and a specific structure of record.
In my F.M i merge record from standard table MKPF and MSEg and return the result trhu the structure.
In initialisation mode, there's no problem . But now i'm must be able to use the DELTA mode but i don't know how to do it.
Can somebody help me?
Here is the code of my function module , i know it's not a standard one because i'm not using cursor but i got everything i need. The delta mode must be on creattion time of record in mkpf .
FUNCTION z_bw_extract_mvt_sortant.
""Interface locale :
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" TABLES
*"      E_T_DATA STRUCTURE ZBW_MVTSORTANT OPTIONAL
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*récupération des données.
CASE i_initflag.
    WHEN space.
      transfert_record it_mvtsor e_t_data i_maxsize.
     DESCRIBE TABLE it_mvtsor LINES sy-tfill.
     IF sy-tfill GT i_maxsize.
       APPEND LINES OF it_mvtsor FROM 1 TO i_maxsize TO e_t_data.
       DELETE it_mvtsor FROM 1 TO i_maxsize.
     ELSEIF sy-tfill GT 0.
       APPEND LINES OF it_mvtsor FROM 1 TO sy-tfill TO e_t_data.
       FREE it_mvtsor.
     ELSE.
       RAISE no_more_data.
     ENDIF.
    WHEN OTHERS.
raffraichissement des variables de travails.
      FREE : r_werks , r_bwart , it_mkpf , it_mseg , it_mvtsor .
      CLEAR : r_werks , r_bwart , it_mkpf , it_mseg , it_mvtsor .
récupération des paramètres.
      PERFORM set_selection_criteria TABLES i_t_select.
      PERFORM init_code_mouvement.
      SELECT * FROM mkpf
      APPENDING CORRESPONDING FIELDS OF TABLE it_mkpf.
WHERE cpudt = sy-datum.
      CHECK NOT it_mkpf IS INITIAL.
      SELECT * FROM mseg
        APPENDING CORRESPONDING FIELDS OF TABLE it_mseg
        FOR ALL ENTRIES IN it_mkpf
        WHERE mblnr = it_mkpf-mblnr
          AND mjahr = it_mkpf-mjahr
          AND werks IN r_werks
          AND bwart IN r_bwart.
      LOOP AT it_mkpf ASSIGNING .
        ENDLOOP.
      ENDLOOP.
ENDCASE.
ENDFUNCTION.
Thanks in advance.

Hi,
first of all: The use of delta in a generic Datasource by FM is not supported by SAP standard. You need to change the extraction method in table ROOSOURCE from F2 to F1. There is no standard transaction to do this, you have to do a hard table update. Be careful not to change any standard datasource by error, otherwise you can get serious problems.
The interface for the FM will change with the new extraction method. You will need a new parameter I_UPDMODE of type SBIWA_S_INTERFACE-UPDMODE to distinguish between Init, Delta and Full Load.
For an example coding please refer to FM RSVD_BW_GET_DELTA_DATA.
Hope that helps
Stephan
Message was edited by: Stephan Müller

IPhone timer functionality lost with latest update

The latest iPhone update has seemingly eliminated the ability to set the timer for anything other than full minutes. I utilized the "seconds" feature very frequently, and this change is an annoyance. Sadly, thoughtless changes by Apple seem to be becoming SOP. I don't suppose anyone knows of a "fix" for this, do they? (I'm still very frustrated over the change to FaceTime on my laptop which mutes all other sounds, limiting the program's functionality; this seems to be a developing pattern.)

Why this function disappeared for awhile, I don't know, but the seconds option is now back. I don't get it...

I cannot open a new tab by clicking on the X. Why was this function disabled when firefox updated. And I lost my links on my toolbar.

Firefiox updated and I've lost my AOL links and cannot open tabs by clicking on the X.

Note that the X is a close button and that the new tab button is styled as a plus (+) sign.
You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar New Tab button.<br />
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it.<br />
You can check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
*https://support.mozilla.org/kb/Toolbar+keeps+resetting

Disabling the auto rotation while doing OCR

how can i disable the auto rotation function while doing OCR?

It does this to improve the OCR but if you can choose Searchable Image (Exact) under the PDF Output Style in the Recognize Text - General Settings dialog it won't deskew the image.

Twist - Auto-rotate sticks in protrait

If I enable auto rotate with the twist in laptop confiiguration, and rotate it sideways, it will not return to either landscape orentation. You can flip portrait either way. putting it in tablet more sometimes fixes it, but sometimes the touchpad ends up 90 degrees off, and a powerdown is the only recovery.

I don't know if this will work for anyone else, but after I turned off auto-rotation by pressing Windows Key + o (the letter, not the number), I "manually" rotate the screen orientation by right-clicking on the desktop --> Graphic Options --> Rotation --> then choose from "Normal" (i.e., laptop); 90 Degrees; 180 Degrees; or 270 Degrees, and it seems to stick. (The Ctrl+Arrow key combination never worked for me.)
Turning off Auto-Rotation while in Laptop mode:
From the desktop, I just used Windows Key + o until the "Autorotate off" message appeared onscreen.
Alternatively, you can press Windows Key +x --> Control Panel --> Hardware and Sound --> Display --> Change Display Settings --> remove the checkmark from the "Allow the Screen to auto-rotate" box --> Click OK
To Right-Click the desktop "by touch" (e.g., you're already in Tent Mode and the orientation is wrong, and it's awkward to try to use the keyboard):
Press and hold your finger on the desktop and a square will appear. Remove your finger from the desktop and the right-click menu will appear, then touch Graphic Options --> Rotation --> then choose 180 Degrees.
Updated: Just realized that switching to Tent Mode doesn't turn auto-rotate back on, but if I collapse my screen down into Tablet Mode from Tent Mode, when the screen is about an inch from touching the keyboard, auto-rotate comes back on automatically. Still, if I press the auto-rotate button above the power button to turn auto-rotate off, when I "manually" adjust the rotation of the screen, it stays in place. But when I raise the lid again to go back into Laptop Mode, auto-rotation comes back on by itself.
I'd love to find out how to disable whatever turns on the auto-rotation function when the screen is in a certain position.

Nokia 5800 WiFi Connection and auto rotation probl...

can anyone tell if they have experienced this problem in their new 5800, the issue with my phone is that I cannot connect to any WIFi connection, it gives an error message and also the auto rotation function does not work. Only after giving it a really hard shake does it seems to respond otherwise it remains as it is. The phone also feels hot even though when not used.
Can any one help me, the phone is just 3 days old.

Thanks....now its sitting at nokia care with the promise that they want to change the mother board. Still waiting.....

Annoying fact: N97 auto rotate while making phone ...

While you are in a conversation and you look back at the screen, you want to press hold,loudspeaker, cut off line or other in call function, the phone will auto rotate to landscape mode, which is very annoying, since the buttons layout will be different and will cause delay.
On the iphone, this auto rotate function is switched off during conversation, which is very practical.
Is there a function on the N97 to turn off the auto rotate during call conversation WHILE the general auto rotate function is switched on in Settings?

Just tried it on fw v2.0, it still rotates during a phone call and there is no option to turn auto-rotation off during phone calls.
I found this design flaw in the UI very annoying. The phone rings, you pull it out of your pocket to answer and the screen rotates to landscape, and let's face it the N97 is not the snappiest phone so I missed a few calls waiting for the screen orientation to get itself sorted. I ended up just turning auto-rotation off, it will still change to landscape orientation when you open the keyboard.
*** Any Nokia employees reading this please forward this issue to the N97 team so that for the next fw update they can either turn auto-rotation off when receiving/during a phone call or include an option for this. ***
Nokia N97 (RM-507) v 22
iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

Auto rotate on iphone 5

It seems like the auto rotate function on the iphone 5 is not very responsive. It's unlocked, so that is not it. Anyone else having this issue?

you do it from control centre
If the screen doesn't rotate on your iPhone, iPad, or iPod touch - Apple Support
Use Control Center on your iPhone, iPad, and iPod touch - Apple Support

Auto-rotate function disabled with v20 update on N...

Similar Messages

Maybe you are looking for