Auto section group/stop section

Does stop section stops the indexing of the content between stop section tag of XML?
Is there a way to stop intermedia to index a xml tag? Not just does to display like seting the visibility to false, but ignore the text between a xml tag.
null

I'm not sure why your stop sections aren't working, but if you know the layout of the document I would recoomend using explcitly-defined field sections rather than auto_section_group.
This will be a lot more efficient for querying.
It will still index the data outside of the <NAME> section, though as part of the "default" section. If you don't want to index that, you could use a user_datastore to remove all the stuff apart from what you want to index.
- Roger

Similar Messages

Is there a way to batch process (basic auto tone) groups of photos in Lightroom?

Is there a way to batch process (basic auto tone) groups of photos in Lightroom?

There are two ways to do this:
1) Create a develop preset and apply it during import of images.
In the Develop Module apply the settings you want to one image and then click on the <+> sign in the Presets panel (on the left side) and save your settings under a descriptive name. In the import dialog on the right side in the panel <Apply during Import> select the preset that you created. It will be applied to all imported photos.
2) In the Develop Module apply your settings to one image then select all the other images you want the same setting applied - but your first image should remain active - to and press <Sync>. A dialog will appear that lets you select the settings you want applied to all images.
WW

Move Tool Auto-Select Group/Layer Toggle?

Hi:
I regularly use the Move Tool's Options palette Auto-Select Group functionality. I've not been able to find any reference to a keyboard shortcut for being able to temporarily toggle from auto-selecting Group to Layer. It seems to me that it would be a useful shortcut.
As it is, the user must select "Layer" in the drop-down menu in the Options palette. It would be much quicker if a keyboard shortcut enabled this toggling.
I've noticed thatwhile the Auto-Select option is set to Groupyou can hold the command key and right-click a layer (with the Move cursor) within a group and it will be selected in the Layer panel. At this point, you can move the selected layer using the arrow keys, but not with the Move cursor. It would be really slick if the Move tool cooperated and allowed moving the selected layer.
Is there some shortcut or technique I'm missing that would approximate this functionality?
-john

You f#*kers have to take into consideration all use cases! A lot of people work with auto-select. How can you just change certain functionalities like this!
This wasn't a problem in older CS4/ 5. This has a direct impact on my productivity!
Please fix this **** ASAP! I paid a butt load of money to get CC license so it can help me improve & work more efficiently not to deal with such ****** issues.

Dock Auto-Hiding always stops working

This has become very frequent. I do not know if it is conflicting with something else I have done similar to the Stuffit bug (when stuffit crashes finder on a right click every 5 clicks or so) .
My dock just simply will not re-appear. I normally go to Utilities, Activity Monitor then quit the dock process which will reload it.
Does anyone know why my dock stops working properly so often? Anyone else have a similar issue with the dock auto-hide feature stops working (it simply does not reappear on mouse over).
I use an external dell monitor, a wacom intuos 3 6x11 tablet and an e-sata express card if those addons could attribute to the problem.
Thanks in advance!
Steve Pell

I use an external dell monitor, a wacom intuos 3 6x11 tablet and an e-sata express card if those addons could attribute to the problem
Does the problem go away without these devices connected?

IPad's auto-rotation frequently stops working.

Hi there, my iPad's auto-rotation frequently stops working and the only way I can get the screen to rotate gain, is to reboot. It used to be once in while but now happens every day which is very frustrating. What can I do to stop this? Thanks, Siobhan

I know you already stated that you have to reboot, but make sure you're doing it this way. I've found some that do it differently and the results can be different.
Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

Failover Cluster in SQL 2012 in not auto switch when stop service SQL

Good Morning to all,
I'm Mr.Tuyen from VietNam. I have a big problem with AlwaysOn High Availabity in SQL 2012.
I setup 3 server and join Availabilty Group. Ex: Server A (Primary), Server B (Secondary), Cluster Qourum is only node. I have test:
1. Stop service SQL server A, immediately server B is Primary
Start servicel SQL server A, Server A is secondary
2. Stop service SQL server B, server is not Primary and "status is Resloving" and role cluster failed with error as belows
[i]Clustered role 'XXX' has exceeded its failover threshold. It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. No additional attempts will be made to bring the role
online or fail it over to another node in the cluster. Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring it online again after
the restart delay period.[/i]
or
The Cluster service failed to bring clustered role 'XXX' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered role.
Do you have same error?

http://blogs.msdn.com/b/sqlserverfaq/archive/2012/03/15/inf-alwayson-the-secondary-database-doesn-t-come-automatically-when-the-primary-instance-of-sql-server-goes-down.aspx
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Lync response group stops after a while with receiving incomming calls

Hi Folks,
We have a strange issue with the response groups of Lync.
It seems that the response group randomly stops working, what means that the users can't receive their call trough the response groups.
Only the response group call(s) don't work, the pstn -> lync lync-> lync call just works fine.
The quick fix is to restart one of the Lync front end servers.
But, that is not really a solution.
The event viewer don't show anything about this problem. Also the Lync monitoring service don't show anything.
Sometimes restarting the Windows Lync response group services solves the problem, but most of the time we need to restart the whole server.
I'm curious some people has the same experience.
If you need more information about our deployment, please feel free to ask.

Hi,
I suggest you try to gather some logs on the Mediation server to see what is happening. Please use Lync logging tool and capture the data for S4
and then try to see if there are any errors after reporduce the problem.
Please try to enable logging tool to get detailed report:
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
http://technet.microsoft.com/en-us/library/gg558599.aspx
Regards,
Kent Huang
TechNet Community Support ************************************************************************************************************************ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a
marked post does not actually answer your question.

Stop auto launch apeture, stop auto launch apeture

how do i stop the auto launch apeture when plugging in iphone?

You can choose what happens when you connect a device in the Preferences to Image Capture (in your Applications Folder)
Or, set the Aperture Preferences to 'No Application' in the Preferences -> Import... Connecting camera opens...
Regards
TD

The 'not member of any group' smart group stopped working

Since upgradng to Lion I notice that the Smart Group in Address book which I set to:
"Card - is not member of - any group"
has stopped working.
I used to find this very useful since I like all my contacts to be assigned to one group, and this helps me spot any I missed when adding new contacts. However it is now always empty, even after I created a new contact and did not assign it to any group.
Is this a known bug?
If not, how do I go about bringing it to the attention of Apple?

http://www.apple.com/feedback/macosx.html
Regards,
Colin R.

Auto respond emailer stops

Hi
We have developed an email application, to give auto response to the mails based on the body of the text. Sometimes the application stops or terminates. We use the inbox mail properties as
           Properties props = System.getProperties();
            // Setup authentication, get session
            session = Session.getDefaultInstance(props, null);
            session.setDebug(debug);
            // Get the store
            store = session.getStore("imap");
            store.connect(mailServer,userName, password );
            // Get folder
            folder = store.getFolder("INBOX");
            folder.open(Folder.READ_WRITE);send mail properties as
//Set the host smtp address
            Properties props = new Properties();
            props.put("mail.smtp.host", smtpHost);
            props.put("mail.smtp.auth", "true");
            props.put("mail.smtp.connectiontimeout", "120000");// 2 minutes
            props.put("mail.smtp.timeout", "120000");// 2 minutes
            props.put("mail.smtp.quitwait", "false");
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);Can you please tell me, what might be the problem ?
Thanks
Subrahmanyam

Hi bshannon ,
Emailer application is running.It is not responding to the new emails. I think the mailer server might be down. We used the following code.
int freq = 1000;
                int cnt = 0;
                for (; ;) {
                    try{
                        // sleep for freq milliseconds
                         Thread.sleep(freq);
                         if(!store.isConnected())
                             System.out.println("session "+ session);
                             store = session.getStore("imap");
                             store.connect(mailServer,userName, password );
                         if(!folder.isOpen())
                              folder = store.getFolder("INBOX");
                              folder.open(Folder.READ_WRITE);
                               folder.addMessageCountListener(new MessageCountAdapter(){
                                    public void messagesAdded(MessageCountEvent ev) {
                                         doProcess(ev);
                        // This is to force the IMAP server to send us
                        // EXISTS notifications.
                        folder.getMessageCount();
                        cnt = 0;
                    catch(Exception ex)
                        int temp = cnt % (30 * 60 * 1000);
                        if(temp == 0) {
                            ex.printStackTrace();
                            cnt = 0;
                        cnt += freq;
}Do we need to create a new session object ?
Can you please tell me the procedure.
Thanks
Surbahmanyam

5900xt auto brake or stop

recentely i bought 5900xt in exchange of 5700ultra
i have a problem that when i play any game like pain killer and farcry game runs well but after few seconds system stops responding(AUTO BRAKE) after a minute it again works
why this is happening i use all drivers like 53.03 55.xx 56.xx but nothings helps
somebody can help me
2.40MHZ HTT ENABLED
4X256 KINGSTON VLAUE RAM
MSI 865PE NEO2

i m not overclocking default speed is 400/700
my card just stops responding after few seconds of game play
last night i thought about flashing my card
so now my card is 5900xt >>5900 non ultra
but problem still exists

HP Officejet Pro L7590 printer auto document feeder stopped working

HP Officejet Pro L7590 (Model: CB822A)
Mac OS X Yosemite 10.10
My automatic document feeder stopped working about a month or two ago. If I put a bunch of papers under the tray there is no beep/light to acknowledge that. So, I can't copy a bunch of papers at once.
Is there a recommended HP repair center/store in my area that can fix it? I'm in Bethesda, MD 20817.
Thanks
This question was solved.
View Solution.

Hi @rustyblue
Although HP does not have an authorizes repair facility that I can refer you to, I have located 2 helpful documents that would allow you to troubleshoot the issue yourself;
An 'Original Jam: Clear jam, and then press OK' Message Displays for HP Officejet 6100, 7100, and D ...
Automatic Document Feeder (ADF) Does Not Pick Up Paper
If the issue persists, you can take the printer to a local mom and pop shop, or maybe call HP. HP could offer you a discount on a newer model.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Tab Groups stopped working after update, Reinstall didn't help

Hi,
I updated to Firefox 26 and all my open Tabs were closed (I had FF set to keep all Tabs open)
Also Tab Groups don't work at all, pushing the button does nothing, same with ctrl+shift+E
Now I tried reinstalling it and it didn't fix anything, Same with disabling all Add-Ons or trying it in safe mode.
Any solutions?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

Script to auto start and stop an application

Ok, I'm looking for an easy solution, maybe someone can point me in the right direction:
I have a security camera program that runs on a Mac Mini that I would like to start and stop at a specific time of day. Is there an easy way to create an Applescript to do that?
Thanks much in advance.

Two scripts and iCal can do this for you. However, it assumes that your workstation is always logged into the Finder and that your app can be scripted beyond start and stop.
--Script 1, launch application
tell application "name of security app"
activate
-- do more stuff here like start capture
end tell
--Script 2, quit the application
tell application "name of security app"
quit
end tell
Save them both as scripts and then use iCal to make two repeating events. One to start the app and the other to stop it. Attach your scripts as event actions. Then sit back and let the iCal schedular the rest.

Auto fill feature stopped working

My PowerBook died, and I ended up with a new MacBook, but same OS X and same version of Safari.
Now, for many web sites, it does not auto fill, until I enter the 1st character of the 1st field?!
Does anyone know how to fix this?!
Mark

Mark,
Experiment with your Safari>Preferences...>AutoFill settings.
The AutoFill Web Forms selection has three choices, and each one of them has an "Edit..." setting.
One of these is obviously causing your problems.
You can edit individual settings, remove some, or remove all of the setttings.
;~)

Auto section group/stop section

Similar Messages

Maybe you are looking for