Auto Size Height

Hello,
I am having trouble with a datawindow that has 2 columns where I need Auto Size Height to manage the height at run-time.
But it does not work and the column data shows on the next row.
I have set the Auto Size property on the column and the detail band. I am using SQL Server 2005 and PB 12.5.2 Build 5609.
Here is a screen shot of the screen.
I would appreciate your help.
Thanks

I'm a little bit confuse on this.
But it does not work and the column data shows on the next row.
What do you mean by next row? I suspect that you mean that the column data is word wrapped, if that is, isn't it the expected behavior of autosizeheight?

Similar Messages

  • InDesign auto-size frame feature not working in real time in InCopy why?

    We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
    Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
    1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
    2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
    3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
    4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
    Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
    Thanks!

    We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
    This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
    If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
    However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
    Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
    Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
    http://forums.adobe.com/thread/671820?start=80&tstart=0
    http://forums.adobe.com/message/5045608#5045608
    As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

  • How can i Auto Size the Column width in RDLC Report

    Hi Friend's,
    I have created Windows application with RDLC Report. I am binding(Generating) dynamic columns and data's in RDLC Report Using Matrix control, I need to make Auto size of Column width for each Column in
    Matrix of RDLC report. So Can any one suggest me to make the Auto Size of Column Width in RDLC.
    Thanks in Advance,
    Mohan G

    Hi Mohan,
    In Reporting Services, the column width/height is hard-coded, hence, we cannot set the column width/height dynamically or based on an expression. So is the report size.
    In addition, since it is a RDLC report, we need a ReportViewer control to display this report within a custom application. If you need to change the size of the whole report, we can set the AsyncRendering property of the ReportViewer control to false, and
    set the SizeToReportContent property to true.
    Regards,
    Mike Yin
    TechNet Community Support

  • How to make modal page to be auto size regarding content in the page?

    Hi, guys:
    I created a modal page (Dan Mcghan's modal page plugin from skillbuilder web site), which pops up when user clicks the master table to see drill down data. However, some rows in the modal page have too many characters, and modal page cannot hold it, so user cannot see the next page with page set pagination, the page set pagination is just out of the scope of modal page. Could anyone give me a suggestion to set modal page auto size adjustable regarding content in the page?
    Thanks a lot in advance.
    Sam

    Hi,
    You can enable "Scrolling" for the modal window under Shared Components -> Component Settings. In the DA that triggers the modal, you can set the "Dialog Height/Width Mode" to Auto.
    BTW, what is the region template of the modal region (in the target page)?
    If your issue is still not resolved, please setup an example in apex.oracle.com and I can have a look.
    Thanks,
    Rohit

  • [svn:fx-4.x] 15289: Regression caused by yesterday' s auto size change in RET.

    Revision: 15289
    Revision: 15289
    Author:   [email protected]
    Date:     2010-04-08 16:09:37 -0700 (Thu, 08 Apr 2010)
    Log Message:
    Regression caused by yesterday's auto size change in RET.  Don't save width and height constraints if we are not auto-sizing.
    QE notes:
    Doc notes: None
    Bugs:  SDK-26175
    Reviewed By: Corey
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-26175
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/spark/src/spark/components/RichEditableText.as

    [mi] EQ overflowing. The server is probably stuck in an infinite loop.
    Seems a little suspicious, though its kind of a generic error message.  Lots and lots of google hits on that one.
    Are you sure none of the libs or executables for xorg-* got damaged before the system called for an fsck?  The power went out on me once and my hard drive "forgot" about 75% of my kernel modules, although it was a conventional hard drive and not an SSD.
    try re-installing some packages:
    pacman -S xorg xf86-video-ati ati-dri libgl
    (any more anyone can think of?)
    [edit]
    Is your copy of that bootchart that blurry or is flicker messing with it?  It looks like its been resized even at largest setting. I can hardly read it.
    Last edited by wriggary (2010-01-29 04:43:02)

  • Text Frame Auto-Size bug? Right margin changes?

    Here is a rounded textbox with an inset of 4, vertical align center. I'm turning Auto-Size on, so the right edge grows as the text in the box gets longer.
    Width only, adjust only the right edge (that alignment UI is messed up BTW if any Adobe UX peeps read this - I ought to be clicking the right hand edge to get what I want!!).
    Now I add an "r" to the end.
    Now, instead of the "r" I will add an "a". It's not much wider than the "r", and I'm not doing anything funky with the kerning. This font is also Helvetica Neue LT Std, so a premium tyepface.
    Notice how much more padding on the right there is? This makes no sense. Now, if I keep typing...
    ... the padding appears to remain constant, or grow slightly.
    My point here is that the inside padding is messed up. It should be 4px inset all around and that's the end of it. Something's off in your algorithm.
    YMMV depending on typeface it appears. Notice that Arial (the second one) appears to work better than Times New Roman.

    Peter Spier wrote:
    I think it's the size of the leading slug, which doesn't change in height, that makes a difference, not the height of the glyph itself.
    Then I guess I don't understand how the margin is different for different letters.

  • How to make an auto size form of dynamic controls

    Hi Experts,
    i am creating a number of TextField controls and adding in the form component at run time.
    i set the width and height 100% but i need to have auto size form depending on the fields.
    please guide how can i set form size auto?

    As long as the form is inside a container that supports auto layout, lie VBox, and the VBox and Form have width and height set to 100% you should be okay.
    What is some simplified yet complete sample code and what problem are you actually experiencing?
    If this post answers your question or helps, please mark it as such.

  • Div auto size are not matching

    I have to div tags that are right next to one another. I need one to be set to auto size so it can grow and shrink with the results of the search. The one to the left of it, the navigation, is set at a min height of 600px. That works great until the search exceeds 600px and grows. The user is left with a gap due to the navigation height being set to a strict 600px. I need a way to "connect" both of these div tags so when one grows the other does as well, with a min set at like 600px. Thanks for your help! Also, as a side note... in google Chrome I get white space after the search.... and not just a little... like 600px worth .. im not too worried about it since it is only in Chrome, but if anyone has any thoughts on that, that would be great! Thanks!
    website can be found at:
    http://web.ics.purdue.edu/~smith50/vcs/home.html
    CSS code for both DIV tags:
    #searchcontent {
    float: left;
    width: 820px;
    background-color: #FFF;
    padding-left: 15px;
    padding-right: 15px;
    min-height:600px;
    height:auto !important; height:600px;
    #nav {
    float: left;
    width: 150px;
    padding-top: 0px;
    padding-left: 0px;
    background-color: #EEE;
    min-height:600px;
    height:auto !important; height:600px;

    Divs don't really work like table columns. What I would do is use a technique called "faux columns". Basically you have a container div with a background image that makes it look like there's two columns. This background image can be pretty short - 800px wide (or whatever desired width) by at least two pixels tall as some versions of IE have issues with 1-pixel high images. You then repeat this image down the y axis using the CSS background-repeat. Your sidebar and serach divs will fit inside the container div. As the content expands in height, the divs inside the container div will expand vertically and everything will be hunky-dory.

  • Auto fit weight & auto fit height in Graphics

    Dear gurus,
    Especially in drill downs, in graphics I need to a feature like "auto fit weight & auto fit height". For example column chart weight is 10 cm, height is 6 cm. In drill down if the lines are not too much chart's columns can be too huge; or if the lines are too much chart's columns can be too small. Therefore the system should change weight and height automatically. I haven't seen any dynamic weight and height feature like is in 'format size' (you know well in format size, we can use auto fit weight & auto fit height feature). Anybody knows? Thank you.

    Hi
    Which Charts are you have used?
    if you want to change format size (it means Columnssize in Coumn Chart is varied according to lines,if you have many lines in the column chart it will show too small or if you have less it will show too huge) for that better to use coumn chart,bar chart.
    If you don't want to change format size( means the line width and height is not changed according to labels if you have many or less it will shows fixed size.) for that better to use LineChart.
    i hope it may help you.
    Regards
    Prasad

  • RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

    Hi, all,
    Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
    This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
    This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
    As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
    Any advice you could give would be welcome.

    Hi there
    Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
    Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
    The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
    Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Auto size of columns is not working after latest update of itunes 8.02

    columns will no longer auto resize correctly after the 8.02 update. the song title column hides song titles on request to resize very annoying please fix this Apple. any thoughts?

    SAME HERE!
    I just created a New List in my iTunes 8.0.2, and noticed the same Columns Width Issue, in List View and Cover Flow View:
    When I Controll-clicked on any Column, and chose Auto Size All Columns, it made the Name Column width more narrow then needed to display it's full content.
    I Controll-clicked on the Name Column, and chose Auto Size Column. It didn't make it wider to extend its width to the the width of the longest Name in that Playlist.
    I tried different Playlists, and another Library and it was the same issue!
    It did work in Music and Podcasts, but not in Videos and Audio Books. Unchecking Columns didn't help.
    Repairing Permissions, and Restarting iTunes and Restarting my Powerbook G4 didn't help either...
    I am sending this bug report to Apple
    http://www.apple.com/feedback/itunesapp.html
    and hope others will do also, if they encounter the same problem.
    And while at it, please join me in asking Apple to make Lyrics Field SEARCHABLE! What an underutilized opportunity that Lyrics Field is. I can store my notes in there, and have clickable web links, if they are in the same format as the one above, in this post. And while at it, make it Searchable on iPhones/iPods, or at least visible!
    Powerbook G4 17', 1.67, 10.4.11, 2GB RAM, all latest Software Updates

  • Can someone help with auto-size fields in forms?

    I created a form in Acrobat for my team members with auto-size text fields that allow to shrink the text when the field size is not large enough to show the entire text. When I then open the same form file with Adobe Reader on my machine with text that has shrunk in some field, I can see all the text and have also a scroll function when the text size has reached its lower limits and there is still more text to show.
    However, when I receive the filled out forms back from other team members' iPads (they use my template created with Acrobat), the text didn't shrink as on a PC version and the scroll function is disabled. I checked the template and the fields are correctly set to auto-size left and they do work on my PC's and laptop's Adobe Reader. But the iPad version of Adobe Reader may cause some issues.
    Can anybody help with solutions?
    Thank you!
    Klaus

    The filled version of your PDF document (20140722 Daily Meeting Report...pdf) is no longer a PDF form because it has been flattened.
    Once an interactive PDF form (such as your template version) is flattened, all form fields are replaced with images of filled data.  You can no longer interact with form fields, edit form data, or tap/click any buttons in the flattened PDF document.  That is the reason why the text in auto-size text fields did not shrink.
    When you email a PDF document (including a PDF form) in Adobe Reader for iOS, the E-mail Document dialog is displayed.
    In this particular case, your team member must have selected "Share Flattened Copy".
    If you would like to keep the interactivity of a PDF form, you can select "Share Original Document".  Please advise your team members to select the "Share Original Document" option when emailing filled forms.
    Unfortunately, once flattened, a PDF document cannot be reverted back to the original "unflattened" state.  However, if your team members still have the original filled forms, they can resend the forms with the "Share Original Document" option.
    Please let us know if you have further questions.

  • Cannot auto size columns in iTunes 10.4.  Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns.

    Cannot auto size columns in iTunes 10.4.  Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns. Cannot order albums alphabetically by double clicking on heading.

    Very many thanks to you, Putaro!  Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
    You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
    But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
    I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
    I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
    If you've got Jax installed, consider removing it before updating to iTunes 10.4.
    My iTunes is now working right as rain, thanks again to Putaro!
    -Jon

  • Indesign Bug with Auto-Size and fitting in Anchored frames

    Hi,
    Steps to reproduce:
    1. Create a text frame with 2 Anchored text frames with the same width.
    2. Make the anchored frames Auto-Size --> Vertical only
    3. insert text to the first frame, when type enter to the next line the frame become higher but the next frame remain in the same position. just after typing the first character in the second line the next frame adjust in the right position.
    4. The same happen when pasting text that make the frame bigger.
    5. The same happen without Auto-Size when fit frame to content.
    Does anyone knows about it?
    Any idea how to bypass?
    Thanks

    This is a user to user forum with "some" Adobe staff participation, report bugs at this link
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests

  • Can I Auto-Size Columns On Finder?

    I like to use "Finder" in the Columns style (3rd Button on top), however every time I launch finder it seems that I have to resize the columns in order to read it completly.  Is there a way to set it up so that it auto-sizes completly on it's own?

    There's another hidden trick.
    First the basics: If you double click the cursor on the line that separates two columns, it will resize the column to the left to fit its content.
    But if you hold down the Option key and then double-click any such line, it will resize all open columns to fit their respective contents.
    It still isn't true auto-resizing, but this does makes my life a lot easier! ;-)

Maybe you are looking for