Auto Transfer Order settings
Dear Experts,
Plese explain the settings to create the Transfer Order automatically in background after goods receipting
Thanks in advance,
Regards,
Krish
Hi,
For auto-TO you need the following settings:
SPRO /LE/ WM/ Activities/Transfers/Setup automatic TO
Enter control of automatic TO creation
Add entry in movement type (in area automatic TO)
Setup job RLAUTA10 via SM36.
You need to create variants first in SE38 for RLAUTA10. Also make sure that in interface IM-WM, you've set TR creation for the corresponding mvt, else the TO cannot be created.
(you can also have the TO created immediately after MM booking)
MdZ
Similar Messages
-
Auto transfer order session immediately after saving delivery in vl01n
Hi all,
Auto transfer order session immediately after saving delivery in vl01n means when do the delivery with vl01n system should open LT03 t.code session on the same session , how to achieve this please advice me.
Regards,
KrishnaHi Krishna,
Please have a look at the SAP note 566090 FAQ for immediate transfer order creation, this note give you some explanation about immediate TO creation...
Regards,
Mauro -
Pre-Allocated Stock - Auto Transfer Order
I am looking at implementing a stock allocation process, but it looks to be conflicting with the auto transfer order process that we are using in receiving.
The allocation process is working fine, but as soon as I want to use an auto transfer order creation process, I get a failure message and the TO does not create.
Is there a way to create the TO based on the allocation in the background without any message errors?
Thank-youcan it be that you try to achieve something with this functionality for which this fuction is not designed?
Preallocated stock is an exception to normal business, and the user tells this exception to SAP by maintained the table.
So SAP knows about an exception and can act accordingly and e.g. pick the material directly from receiving area, and does not wait until all stock is putaway.
http://help.sap.com/saphelp_470/helpdata/en/c6/f83fbe4afa11d182b90000e829fbfe/frameset.htm -
How to create Auto . transfer order
Hi Guys
How to Create Automatic transfer order after posting GR wrt PO
What are the settings required for this?Hi,
Please refer the below link
http://help.sap.com/saphelp_45b/helpdata/EN/c6/f83db14afa11d182b90000e829fbfe/content.htm
Regards,
Deepak. -
Auto Transfer order for picking from WM
Dear Sapiens,
I am facing a issue of picking material for delivery:
The material from storage Type 251 and Bin say 'FGFLOOR' Picks to Storage Type '916' and Bin say '75002137' i.e After TO
So after doing PGI it will pick from Storage Type '916' and BIN 'A1'.
After completion of delivery both records should cleared from report LS24 but in our system it is not happening.
Which I am clearing using LT01 which is timing consuming, So is there any automatic setting which should cleared
both Storage Type(i.e 251) and Interim Bin Location (916) after doing PGI(601)
Typ StorageBin Total Stock BUn
SLoc Batch Stock for putaway Pick quantity
252 FGFLOOR 40 EA
FGWH RP11050180 0
252 FGFLOOR 80 EA
FGWH RP11050179 0
916 75002137 -80 EA
FGWH RP11050179 0 0
916 75002137 -40 EA
FGWH RP11050180 0 0
Please help me out .
Thanks & Regards,
Olet MallaHi Jurgen,
Exactly the same should happen as u said,but in my system it is not happening zero, As u can see the report posted by me.
I am manually clearing LS24 report by transfering RMFloor(251) Material to Dyanamic BIN(916) using LT01, So where we can see
the Configuration setting for the above Scenario if needed?
Kindly needed your suggestion.
Thanks & Regards,
Olet Malla -
Auto Tranfer order against OBD
Dear People,
Requirement was auto creation of Outbound delivery once the STO created and simultaneously transfer order should be created from our WM storage location(Confirmation of TO manual). As a first part auto delivery creation was successfully created but auto transfer order against the delivery is not getting generated.
I have set following config in IMG
1. In OMKZ of control data for Warehouse has been set to "X"
2. In Movement of 601
--> TO creation = 2
--> TO confirmation = Blank
--> Auto TO = A
--> In Confirmation both the check Box are unchecked
Kindly confirm if there is any other check that need to be configured.
Thanks in advance
JKPlease be aware that automatic creation of TO and immediate creation of TO are not the same in SAP.
Automatic creation of TO:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
You have to schedule a background job (program: RSNAST00 ) to achieve your goal.
As for immediate TO creation please check OSS note 566090.
Please also search for threads, these have been discussed already on this forum.
Regards,
Csaba
(if Rao's answer helped you why didn't you gave the points to him?)
Edited by: Csaba Szommer on Dec 28, 2009 11:08 AM -
Transfer Order auto create for Posting Change not working
Hello Gurus -
When we release an inspection lot from "Q" status, it creates a posting change notice, and we have it configured to create a TO in the background to the same bin, and auto confirm. The desired and intended result is to take something from "Q" status to unrestricted status, while keeping it in the same bin - and avoiding the user having to deal with the transfer orders. Essentially it is seamless and all in the background, the user just sees that he has changed something from quality status to unrestricted.
It works fine when the entire quantity is selected for the usage decision, but when a partial usage decision is made, the transfer order does not create - and requires processing in LU04 for the posting change.
Why would this work for an entire qty, but not work for a partial qty - and simply require someone to go in to LU04 and hit "create transfer order" - with no additional information?
Any help would be most appreciated. Does it have something to do with a setting of quants?Hi,
In case of a usage decision for a partial quantity, it is not possible to create the Transfer Order for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest to blocked stock or scrap. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online
processing (LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
Hope this helps,
Sinéad Curran -
I am ordering a new IPad 4 and I now own an Original IPad. Can I transfer all settings and info. direct from old to new? How?
Yes, restore the iPad usind a backup file created in iTunes from the iPad 1.
-
Auto Confirmation of transfer order - 999 mvt from storage type W01 to S01
Hi,
I am trying to automate the confirmation of transfer orders between storage type W01 and S01 using a 999 movement type. The 999 movement type appears to work perfectly when doing a bin to bin movement within the W01 storage type (for example move batch abc from bin 01 to bin 02) no confirmations are required. However if I transfer from a bin in W01 storage type to the S01 storage type (which only has a single bin to represent a staging area) a manual confirmation of the transfer order is required via lt24 or lt12. It appears therefore that the issue is with the storage type S01 for this particular Warehouse. The setting to confirm the TO immediately is already activated for movt 999 in customizing, is there a setting for the storage type that must be defined.
Regards,F1 help for field V_T333-SQUIT:
Means that the transfer order item can be confirmed immediately during the creation procedure.
SAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
To set the confirmation requirement for foreground processing, select the indicator for TO item can be confirmed immediately.
As per my understanding the immediate confirmation indicator does not mean that the transfer order will be confirmed immediately. It makes possible that during the creation of transfer order you CAN put a flag in the confirmation checkbox.
If you use it together with "propose confirmation" flag (setting for WM movement type; V_T333-VQUIT), the falg in confirmation check box will be populated automatically during TO creation.
Edited by: Csaba Szommer on May 10, 2011 11:22 AM -
Stock Transfer Order (UB) NACE settings help
HI friends
we want to create print out for stock transfer order(order type 'UB').
data move from DD1 plant to plant DD4...
my output type is : ZDSI
Application 'EF'
i know if the doc type is 'NB' i can create condition records for vendor,com ode......
now my case There is no vendor how can i create the condition records for plants as a patners.
please help me.
Thanks
Narasimah RaoYou will need to create a custom access sequence
and include a new condition table there if its not already available
use this access sequence in your output type -
Auto batch determination at the time of picking by transfer order
Hello,
Our problem is, at the time of creation of transfer order with reference to delivery, system can not pick up the batches automatically as per the SLED. We have to manually enter the batches as per the SLED. Could you please guide me step by step procedure of automatic batch determination as per SLED at the time of creation of transfer order with reference to out bound delivery? (Please state step by step procedure of automatic batch determination as per the SLED at the time of picking with transfer order)
Thanks
MilindHi,
As for remaining shelf life please check OSS note 33396, 72771. Additonally this may also help:
http://www.renet-web.net/2008/09/05/sap-batch-determination-made-easy/comment-page-1/
As for sorting according to SLED date please read OSS note 769036.
Regards,
Csaba -
Automatic Transfer Order Creation
Hi All,
Scenario: When there is GR from Production order into WM Storage Location I have all settings so that Inbound Delivery HU Mvt is created also Material is getting packed into HU in Backend automatically as soon as Delivery is created.
My Requirement is
that I want to create Automatic transfer Order for this Inbound Delivery created. I have gone thru STD SAP Docuemnts which tells auto TO creatoin for TRs. But I need to create Auto TO for Inbound Delivery not for TR (of course in backend)
So that in the next step the TO can Be confirmed manually.
Can anyone plz help me << Moderator message - Everyone's problem is important >>.
Thanks in Advance
Edited by: Rob Burbank on Nov 10, 2010 3:57 PMHi,
To create automatic TO in the back grond w.r.t to inbound document is not possible in WM , i belive.
if you dont want to use TR ,then do the following setting in customisation
SPRO- LE-WM-interfaces-activate automatic to creation -movement type assign- keep TR column blank and in create TO immediatly column use x ( Call up transaction "Create TO for material document")
Thanks & Regards
Om -
Transfer Order not created while performing GR for Production order
Hi, I am facing a problem while recieving stock from a production order. The system does not create a transfer requirement or a TO.
Let me give you a brief background.
This is a new functionality introduced in ECC 6.0 for working with kanban in WM.
Supply area is created for WM location.
Control cycle is created for material, supply area. Warehouse, storage type and Bin is maintained in control cycle record. When the GR is done for production order material is recieved in this bin.
1) Now when the Kanban is set empty a production order is automatically created.
2) Once the production order is confirmed the material automatically shows up in the bin.
A material document is created which shows IM movement type 101 and WM movement type 103. Also in material document Immediate auto TO checkmark is blank.
3) *PROBLEM* - System does not create a TR or a TO. the material automatically shows up in the Bin. How can we enable an auto TR and TO creation.
Following are the settings which I have already checked:
1) In IMG, WM movement type 103 has auto TO indicator set.
2) IM-WM interface for 102 movement type and 103 movement type is maintained.
The main problem is: Although the material document displays WM movement type 103 and the stock lies in WM bin, System never created a Transfer requirement or a Transfer order.
I would really appreciate if anyone can help me in this.
ThanksHi Mike,
I do not know this function in SAP, so these are just my ideas:
1.
System does not create a TR or a TO. the material automatically shows up in the Bin.
I think it's a normal SAP behaviour. If you do GR against a PO the quant(s) will appear in interim storage bin w/o TO. The TO is to move the quants from one bin to another, but in this case the quant comes from 'nothing' and arrives at the bin.
If you make confirmation and consume the components refering to a PrdOrd, the components will disappear w/o TO from storage type 100 + dynamic bin, because there's no TO that could move them from dynamic bin to 'nothing'.
So, these 'movements' are to change the WM stock level and TOs are not designed for this.
2.
There's difference between auto creation of TO and immediate TO creation. Please check what SAP help says in case of TOs for outbound deliveries:
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
3.
Now when the Kanban is set empty a production order is automatically created.
So, if you remove the stock from the Kanban it triggers the creation of a PrdOrd. This is very logical in a Kanban system because it is a pull system. but your problem is not this, it's clear.
If you just created an automatic TO and would remove the stock from Kanban-bin, a new PrdOrd would be generated, and so on. As many times you remove the stock a new PrdOrd is created and this might be the reason why no TO is crated automatically. In this case this would be a push system and not kanban system.
I do not know this process but if we concentrate only on the pull system, maybe this Kanaban is to store the FG until an event (e.g. shipment) should trigger the stock removal from this bin. (just my assumption)
Please try to mark the TR creation for the movement type w/o auto / immediate TO and tell us the result (whether you get the TR if you confirm the PrdOrd).
Regards,
Csaba -
No Automatic Transfer order creation upon usage decision for 553 mtype
Scenario: We have quality and warehouse management active. Goods receipt is done against a purchase order. Stock comes into 902 storage type under stock category u201CQu201D. From 902 storage type, Goods issue to scrapping under quality( using IM movement type 553 ) is done using QA11. Normally, once GI to scrap under quality is done at IM level, WM movement type 551 gets triggered automatically in the background which creates a transfer order to move stock from 902 to 999 storage type under u201CQu201D stock category.
Problem: System unable to find storage bin for storage type 902 Q.
In our system, automatic TO creation from TR isnu2019t happening once the usage decision for 553 movement type happens. The TO creation process couldnu2019t recognize the stock which is available as u201CQu201D. It throws an error message u201Csource storage bin could not be foundu201D at the time of TO creation from TR. Putaway strategy for the physical storage types is FIXED BIN, MIXED STOCK ALLOWED and ADDITION TO EXISTING STOCK. 902 storage type has ADDITION TO EXISITNG STOCK and MIXED STOCK as a putaway strategy.
We have already activated auto TO creation settings at WM-IM reference movement types interface configuration.
Is there any setting missing at QM-WM interface?
Can someone please tell us a methodology to activate this transfer order creation process (WM mtype 551) for 553 IM mtype ?
Thanks in advance. Please reply.
Regards
Preetinder Singh
Phone: 404-468-8422Hello,
I do not understand your scenario , u are saying are posting inspection lot to non WM storage location and again saying system can not find bin automatically.
"A transfer requirement (movement type 311 / destination u201C921 Transferu201D) is created after the inspection lot posting (QA11) but the auto-creation functionality is not possible since the u201CSystem cannot find source storage binu201D.
How can this auto-creation of a transfer order be realized since it is possible to create the transfer order manually via LB11 (entering source u201C902u201D / storage bin u201CPurchase Order no.u201D)?
The system cannot find the storage bin automatically.
Thank you in advance!"
Please let me know are u using quality interim storage area. If you clear material from quality and want material to go to bin then it should be warehouse managed storage location.
Regards,
Prashant -
Creating "Immediate" Transfer Order
Hi
I am able to create "Automatic" Transfer Order using a Batch job. But I am not able to cretae " Immediate" transfer order for a TR.
What are settings i have to make / check in order to enable immediate To creation.
Thanks in Advance.
Regards
ramHi Ram,
You can make immediate TO by using Reference Movt type - WM movt type mapping. Path is SPRO-LE-WM-Interfaces-IM-Define Movt types- LE-WM Interface to IM. Here you need to put X in column 9 (Create TR) and A (for Immediate Auto TO) in column 11. Try this and it should work. Also you need to maintain WMTA as output type for the delivery you want to have auto TO for.
I am sure this will help you.
Take Care
Manav
Maybe you are looking for
-
i updated firefox and now i can no longer access pogo.com it states that java is unavailable on my pc. When i run test for Java it states that i have most recent update installed and it is operating
-
How to send Secured Mail using Java Mail?
I want to send mails with "Send Secure" option using Java Mail. Now mails are being sent using Java Mail connecting to smtp host. Appreciating your help. Thanks.
-
Smartforms command to next page without balnk area in main area
Hi all, i have created a smart form for Notification printing. i have one page called page1 page1 ->Text page from 1 to 8. -> text reported by : Tark ->MainWindow. ->Table itab1 into itab1 ->loop1 itab into itab. where adrnar = itab1-adrnar. ->loop2
-
TS3212 HOW DO I GET TO THE A-Z SONG AREA FOR MY IPOD SHUFFLE?
Hi there....anyone out there who can tell me where to go to just download single songs from a to z on my ipod shuffle....? It should be simple, however I am not having any luck....thx.lisa
-
Which archived adobe flash version need I install for a galaxy pro 10.2 notebook
Which archived version of the adobe flash player do I install for a galaxy pro 10.2 notebook?