Autofill does not work correctly

Autofill in iPad 3, filling forms and passwords is hit or miss. Can one access the autofill data to correct it or delete it?

You will have to clear all data by going to Settings>Safari>Clear Cookies and Data, and start all over.

Similar Messages

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

When autofill does not work

When autofill does not work, what can the culprits be?
Deleting preference did not work. thanks.
Safaari 3.1.1.

Did you ever get your problem solved?
if so, please tell me since I have (since about a week) same problem.

How do I get a refund for an App that does not work correctly?

How do I get a refund for a App (Express Newspapers) that does not work correctly?

How to report an issue with Your iTunes Store purchase

Focus under Win2k does not work correctly

Hi,
we've found out that the focus does not work correctly under Windows 2000 in
Seamless Mode (App is a Windows Application running on Windows Terminal Server
2003), the same application has no problems under Windows XP, Apple Macintosh
and Linux.
Example: The application has a button which pop's up a small calendar window
giving that window focus. In Tarantella under Win2k however you just see the
window popping up shortly and then going in the background. As the window is in
the background and you can't get the window back and you also cannot work
further in that application as the rest is inactive.
Only way is to do a right-click on the application in the taskbar, which brings
the window in the foreground again. What makes this problem even harder to
analyze is, that it sometimes even works correctly (around 3 of 10 times).
We've mostly recognized this with modal windows. The native client does not have
this problem, however as far as I know it does not support seamless mode.
2. The second problem we got is, that if you click with the mouse into the
initializing Window while the application starts up after you have clicked on an
application Link in SGD (I mean the Pre-Login window of Windows which shortly
shows up just before the Login Process begins),
the application is not started seamlessly but is started within that window and
you have no chance but closing an restarting the application to get it in
seamless mode. This is seen on all Client Operating Systems by us and not only
Windows 2000.
The Client runs:
Windows 2000 SP4 all updates installed
Java: 1.5.0-5
Browser: IE6.0 and Firefox 1.0.7
Server: Windows 2003 Terminal Server (all updates installed)
Tarantella: 4.20.909
I hope that someone has at least a workaround.
Regards
Carsten

I have organized some testcases attached are 3 Test Programs which work
nice natively but got these problems under Tarantella under every Windows
Operating System (the error is not Windows 2000 as I previously mentioned but
also occurs on Windows XP).
The interesting thing is that the Test Program made with .NET does not show this
problem.
Could someone please test these and tell if this error is reproducible on your
systems as well ?
Run these Testprograms natively, they show no misbehavior.
Execute this from a SGD Webtop Session in Seamless Mode, see that
the Modal window is not modal but shifts into the background on every 2 -3 click.
Regards
Carsten
[ModalTestPrgs.zip]

Since I upgraded to Yosemite, my CS5 does not work correctly.

Since I upgraded to Yosemite in October, my photoshop CS5 does not work correctly. When right clicking to change a brush size, the adjuster when moving to the right or left, either sticks or moves radically. As I set the size of the brush and move my cursor back to the image, the adjuster moves with the cursor.
Help!

sharonfrombury wrote:
Is there no contribution from Apple support community for this question yet? I know there have been teething problems upgrading to Yosemite, but this loss of functionality is adding administrative workload that I can ill afford. Come on Apple, some ray of light please.
If you read the Terms of Use you agreed to you would realize Apple does not read or participate in these user forums. All posts and responses are end users just like yourself. If you have feedback for Apple please post it at www.apple.com/feedback. Please do not expect to hear back from Apple, they read the feedback but do not reply.
Also, the feature the feature of combining multiple PDF's into one document using the Preview app works perfectly.

My autofill does not work while using Safari. Have checked both Safari and Apple settings.

My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.

Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.

SB Titanium Fatal1ty Champ - Frontpanel does not work correctly

?SB Titanium Fatalty Champ - Frontpanel does not work correctly? good morning,
i use the fatalty with the - champ - frontpanel. Unfortunately this panel does not work correctly. that means is have sound at the headphones and can use the mic but i cannot change the volume (HP and Mic)and cannot change?game mode, cmss-3d and crystalizer.
i?tested this card on two operating systems (one of the totally new) but the frontpanel does not work.
I try the driver from CD, the newest which will be found by creatives autoupdate driver search and i check youp pak but none of them will help.
Internal Soundcard of my mainboard is deactivated.
The hardware is not damaged - i try two different titanium cards with two frontpanels...
here my system:
[color="#0000ff" face="Book Antiqua">MSI DKA790GX Platinum , Cooler Master CM 690
AMD Phenom X4 9950BE @ 3,2GHZ, Logitech Z-4e
4GB Kingston HyperX DIMM 2 GB DDR2-800 Kit
MSI N260GTX-T2D896-OC @707MHZ
Xilence RedWing Gaming Edition Modular - 750 Watt
Creative X-Fi Titanium Fatalty Champion Series
Windows Vista Ultimate 32-Bit; Samsung T260
so...what can i do now? i have no idea what to test now?
brgds
stefan

So nobody actually has any idea what the problem is? I'm not the thread-bumping type, but this is a very annoying issue and if anyone has any useful information I would greatly apprecaite it.

Trust computer does not work correctly

http://support.apple.com/kb/HT5868 - this is the thing that makes me NOT continue using Apple products anymore. The feature does not work correctly and I am SICK of reinstalling drivers, turning on/off apple mobile service to get access to my files. I ask for a premanent fix OR REMOVE THIS CRAPPY feature you have put in !!!! You care about your customer satisfaction, am I correct ? Then I do expect an answer ( read this as permanent solution ) to this issue.
I have been connecting to the very same PC for months. And it asks me to trust it every time, which does not work at all.
iOS 7.0.4

Dan, they never responded to this. And now you are telling me this is still going on with iP6 on iOS8. God, Apple started to really suck in some aspects. I have the phone, have unlocked it and have access to all apps and settings on it, even those photo/video files from the device itself! And I still need to give permission to the computer from the phone, just so I can access them on it?!? Seriously what the **** is with that feature and why does it not work correctly for us? Still the same on my current iP5 , iOS 7.1.2

Stylesheet does not work correctly

I have web pages in the root and sub directories:
/index.jsp [ <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/> ]
/folder/list.jsp [ <link href="../resources/stylesheet.css" rel="stylesheet" type="text/css"/> ]
/resources/stylesheet.css
index.jsp has hyperlink to list.jsp and list.jsp has hyperlink to index.jsp.
When app start, stylesheet is correctly applied to index.jsp. After I go to list.jsp and return back to index.jsp using hyperlink, stylesheet does not work anymore.
Did anyone had similar problem? Do you have any workaround solution?
Please help.

I have not found anything in JSC that helps creating context url for stylesheet reference. Here is ugly hack I use for root page:
/index.jsp [ <link href="/webapppath/resources/stylesheet.css" rel="stylesheet" type="text/css"/> ]I will appretiate if anyone has more elegant solution or give more insight into JSC.
Thanks!

JCLoginDialog does not work correctly in JDev 10

Have anyone got the JCLoginDialog to work with JDev 10g and JDBC?
I have a JCLoginDialog generated by JDeveloper 10g, and have made the appropriate changes as described in the JDeveloper help. (Removing password and deployPassword entries in bc4j.xcfg and made the described changes in the getInfo method.)
When I am starting the application, I am repeatedly getting prompted for username and password, although I enters the correct values).
Below is some trace from my getInfo-method:
Debugger connected to local process.
getInfo --> user = xyz
getInfo --> password = null
getInfo <-- user = student
getInfo <-- password = student
getInfo --> user = xyz
getInfo --> password = null
getInfo <-- user = student
getInfo <-- password = student
getInfo --> user = student
getInfo --> password = student
getInfo <-- user = student
getInfo <-- password = student
getInfo --> user = xyz
getInfo --> password = null
getInfo <-- user = student
getInfo <-- password = student
student/student is the correct database username and password, and xyz is the value for username in bc4j.xcfg.
Another interesting thing is that the runtime exception checked for in the beginning of the getInfo-method:
RuntimeException exc = ((RuntimeException)((Hashtable)connEnvironment).get(DefaultConnectionStrategy.LAST_EXCEPTION));
is always null, even if I tries to enter an incorrect password.
I need a quick solution for this, since we must be able to use different database users in our application.
Thanks in advance.

Has anyone succeded in doing this?
This is a very very basic functionality, and it does not work in JDev10g Production. Either it is a bug in ADF, or a bug in the documentation of how to implement this.
Oracle Support, where are you? I have not got any answers for this, neither in this forum, nor in Metalink.

Kenwood X991 & iP200 cable with iPod 5th Gen 80GB does NOT work correctly

I have a conundrum. My wife has the 4th Gen v1.2.1 iPod 30GB which works fine on my Kenwood X991 Head Unit. I recently purchased the "new" 80GB iPod 5th Gen with the latest version "1.0.2" which does NOT work properly. The iTunes software tells me that this 1.0.2 is the latest software.
When I attach my iPod to my stereo, it states "Reading" for eternity. It DOES play music but only plays Alphabetical Order ONLY. There is no ability to stop, change, fast-forward, reverse, etc....the only thing you can do is click "Source" to change to CD Player or Tuner, etc...
Does anybody out there know what is going on? I have a request into Kenwood as well. Thanks in advance for all your help!
-Kingofbytes

Thanks for the help. It's an iPod Classic then 80GB. The unit plays when plugged in but does not allow searching, or switching songs nor displays as it is supposed to. My wife's 30GB works with no problems. Of note:
Her 30GB = v1.2.1
My 80GB = 1.0.2
Mine is newer by about 6 months. Both are the latest software according to the screen.
Kenwood has said to "reset the head unit" and "make sure I've got it plugged in properly". I need to try the reset part next but the last statement is funny to me. I can install a head unit, amplifier, re-run all speaker wire, install a Dual 10" subwoofer box, solder and wire tie all connections from a factory unit to a 3rd party Cable manager kit, but I need to "make sure" I know how to plug in an iPod cable.....laughable.

Autofill does not work correctly

Similar Messages

Maybe you are looking for