Automated batch doesn't work in photoshop & from Bridge

Hi all,
Automated batch from Bridge tools>photoshop>batch Photoshop cs5 stops working. Automated batch also doesn't work in photoshop. Automated actions work in Photoshop. All other Photoshop process work from Bridge. I use a PC with windows. This happens even with files I was previously able to do an automated batch with Photoshop. It doesn't matter what the file extension is. This has only recently begun happening for no apparent reason.

First, given what you've written, it's important to ask: 48 x 48 what? Details matter. 48 x 48 pixels? Inches?
Beyond that, yes, I believe the Image Size dialog interacts with us a little differently than it used to.
Whether it's a positive or negative design change I can't say. They're trying to pack a lot of functionality in there, and it might take a little getting used to... It does seem deterministic:
If you want to keep the physical print size the same and increase the pixel density - i.e., upsample the image - you would have to choose physical dimensions. Try this:
1. Change the units to inches.
2. Change the ppi value and press OK. This resamples the image.
On the other hand, if you want to keep the pixel count the same, but just change the ppi value so that it matches a particular kind of display, how would you do it? Try this:
1. Change the units to pixels.
2. Change the ppi value and press OK. This changes the metadata.
Are you trying to assume what leaving the units set to percent means? To me it says "xx % of the pixel count".
-Noel

Similar Messages

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

I had a bright house cable modem that also had built-in wi-fi.
Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
That would be correct. Hopefully, they offer this type of option for their customers.

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I c

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?

Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums.

Cache doesn't work with Apace-WebLogic bridge

Hi.We noticed a problem with the download performance of our Java applet with Netscape. It's a tiny applet of 300K that takes only 2 seconds to load using IE, because it is already cached, and with Netscape it is always reloaded and the cache doesn't work.The applet is located on a WebLogic server, and we access it through an Apache server that redirects all requests to the WebLogic server. We noticed that when we access the WebLogic server directly, Netscape cache works fine. However when using the bridge, Netscape ignores the cache, while in IE the cache still works.The Apache server is installed on RedHat Linux 7.1. The bridge is a WebLogic module developed by BEA (the makers of WebLogic) that extends the Apache functionality and enables it to act as a proxy and leave the client (browser) totally unaware of the redirection. The requests are sent to the Apache server and the responses appear to be coming back from it as well.We need to understand why the cache doesn't work when using the bridge. Can you please tell us if you know of this problem or not, and if not -- point us in some direction to check for the problem.Thanks.

You have to modify the password manually in OEM's target.xml.

SQL batch doesn't work; How to fetch related objects with fetch group?

I have two questions:
1. SQL Batch doesn't seem to work. I have tested some batch object creation
with BatchLimit set to -1, 0, 1, 25, 100. They all have similar
performance.
kodo.jdbc.DBDictionary: BatchLimit=25
2. How to use custom fetch group to fetch related objects? The example of
custom fetch group only show how to fetch different attributes in different
groups. I have a test cases where I would like to pre-fetch related objects
to save round trip.
Enviroments:
* Kodo 3.1.0 RC1
* Oracle 9i release 1
Thanks for any help!
Qingshan Luo
Senior Software Engineer
Open Harbor
1123 Industrial Road
San Carlos, CA 94070
Phone: 650-413-4251
Fax: 650-413-4298

try poracle 10g driver. At least they fixed terrible CLOB bug may be batch
to. BTW 9.2.x has problem with batching with deferred constraints so be
careful
"Greg Campbell" <[email protected]> wrote in message
news:c3dmnu$rmj$[email protected]..
>
"Qingshan Luo" <[email protected]> wrote in message
news:c3dg7q$mdl$[email protected]..
Hi,
I have two technical questions with Kodo.
1. SQL Batch doesn't seem to work. I have tried batch size of -1, 0, 1,25.
But the performance from batch creating objects is not affected by batch
size.
kodo.jdbc.DBDictionary: BatchLimit=25You may be running into a bug in the Oracle 9.2 driver. That driverdoesn't
reliably give update counts when using batching and prepared statement
caching. By default, Kodo will turn off batching. You can manuallyenable
batching by setting the BatchLimit on your DBDictionary, as you've done.If
you do this, though, you may want to turn off prepared statement cachingby
setting MaxCachedStatements to 0 (see
http://www.solarmetric.com/Software/Documentation/3.1.0RC1/docs/ref_guide_dbsetup.html#ref_guide_dbsetup_builtin).
>
2. How to use custom fetch groups to eagerly fetch related persistable
objects? Example only showed attributes, not relationships.You can find information on setting up eager fetching of relations at
http://www.solarmetric.com/Software/Documentation/3.0.3/docs/ref_guide_
perfpack_eager.html
Basically, you'll need to add the relations to your fetch group, and
set the eager fetching mode.
Enviroment:
* Kodo 3.1.0 RC1
* Oracle 9i release 1.
Qingshan Luo
Senior Software Engineer
Open Harbor
1123 Industrial Road
San Carlos, CA 94070
Phone: 650-413-4251
Fax: 650-413-4298

Video doesn't work when calling from Jabber to DX650

Hi,
I just added a DX650 to our CUCM 9.1.2. When I call from either Jabber to the DX650 or Lync to DX650, the video doesn't work and the call is audio only. The message i'm seeing on Jabber is something like "the other endpoint is not accepting video." Sorry i don't remember the exact message. Has anyone seen this issue before? Thanks!

Lync is not standards based and has proprietary codecs for video. You will need a Expressway with the MS Interop key to get video both ways.
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-2.pdf

Can you restore from an older iCloud back up (July 3rd), and if it doesn't work RE restore from a new iCloud (July 14th)?

I upgraded my 4S to a 5 on July 3. I had updated my back up to iCloud that morning (but it had also updated the night before). It did NOT restore from back up ANY games (I play one all the time and had a year and a half's worth of work in it!!!) But, I assumed it didn't do that, because it DID pull my contacts, though it didn't pull my email or my texts or anything. On July 13th I had to swap the 5 out for a new 5 because the first one was glitching. When I restored from back up this time (the date on it was July 12th) it pulled EVERYTHING!! I would like to try to reload the one from the 3rd to see if it will work now, but I hate to loose everything again! Can I load the 3rd's back up and if it doesn't work, RE load the back up from now? And even if I could do that, HOW do I do it?

This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Windows users doesn't work after migrating from old to new server!

We have done a complete re-install on our XServe with OD. We have about 10 Windows users, and after the installation all their settings and mail are gone. All the "normal" files are there though.
I'm not sure we have done it the right way though: We did a backup from the old server (a bootable copy with Super Duper), then we formatted and installed everything. We made new accounts (with different names if that's good to know) and copied the users home folders to the new location. The Mac clients seem to work good, but all the settings on the Windows clients are gone...
Is there an easier way to this? We still have the workable copy from the old installation. There seems to be some kind of export/import way to do this, but I haven't got a clue how to do that...
Please help!

davidh,
We didn't reintegrate smb.conf, but set the new server up just like the old one. We did however compare these files to see that the vital parts (netlogon, shares and so on, and of course basic settings) were correct.
We also copied the user files and profiles and made them identical on the new server, except for placing them under the new usernames.
Regarding the Local Settings folder, it doesn't exist on the old server, that's one of the weird things. We've checked the profile for a user on the client machine, and it is a roaming profile. That's why we're a bit puzzled as to why the login works and all files are there, but the user preferences and Outlook doesn't work.
I know I've read somewhere that the Local Settings aren't replicated like the other files in a roaming profile, but I haven't finished checking up on that. I wouldn't expect anything else than that Windows takes care of Outlook e-mail for a roaming profile as well though; I mean, the user must be able to read his/her mail from any computer in the domain, what else would the purpose of a roaming profile be?
Except for the weird thing about us not being able to find the user preferences or Outlook files for the client amongst the files on the server, I feel we're missing something; Apparently Windows isn't as straight forward as one would expect (not sure why I did expect anything, come to think of it).
We're going to give it a new go next weekend. Except for doing further research we're thinking of copying /etc/smb.conf and the files in /var/samba and /var/db/samba to the new server, along with exporting and importing the old user accounts to the new server, and then see if everything works as expected.
If so, we'll see if we can change the account names in a nice way, it's really desired to do so.
If not, we really need to do some more research, but if I'm not mistaking, the Samba-related files I just mentioned are the ones that pretty much make up the Windows Services in OS X, isn't that so?
Thanks!

Mighty Mouse - scrolling to zoom view doesn't work in Photoshop CS, why?

I just got my new G5. Apple's new Mighty Mouse doesn't seem to work right with the main apps I use. You can't use the scroll wheel to zoom the view, in either Photoshop or Cinema4D (3d app). I tried turning off horizontal scrolling in hopes that it would fix the problem. Nope. No zoom. Can you remove the Might Mouse driver so it is just a two button/vertical scroll mouse?
Quad G5, 1.2ghzPowerlogic Quicksilver, 800iBook Mac OS X (10.4.3)
733Quicksilver, 800iBook Mac OS X (10.2.x)

Doh! I thought that was on by default. It still doesn't work in my 3d app though, but I found out that is a know issue and the latest update should fix it. Thanks for your help.

USB Mouse / Keyboard doesn't work after resuming from hibernate

I am using a USB device that splits out to 2 PS2 ports, one for a mouse, one for a keyboard. It works great, but when I put my X61 into hibernate, the mouse and keyboard do not work when I resume from hibernate.
I installed all the relevant patches and power manager drivers from the driver downloads page, but my mouse still doesn't work.
Can someone point me to the correct download or shed some light on this?
Thank you!

I have this same problem with this same device. It is a "composite USB device".
What I've notice is that the problem happens mostly with USB 1.1 ports. When the device is connected to a USB 2.0 port the problem doesn't happen always.
It depends on the computer though. I added a PCMCIA USB 2.0 adaptor to my laptop that has USB 1.1 only. And when I connect the USB-to-PS/2 cable to the USB 2.0 my mouse sometimes work after suspend/hibernate but sometimes doesn't.
However, on my other desktop computer, which has integrated USB 2.0 ports, this problem has never happened (I haven't tested it exhaustively though).
This is a Windows bug of course. Everything related to USB 1.1 support is buggy in Windows. One more example is the annoying (and possibly catastrophic) "Delayed write error" that appears when you use a external hard drive plugged to a USB 1.1 port.
I guess M$ is focusing their efforts on making USB 2.0 to work well and they have forgotten about USB 1.1. Or it could a problem related to "USB composite devices", hard to know.
Message Edited by getfree on 02-22-2009 03:19 PM

Mouse clicks, scrolling doesn't work in applications from start screen (let's call it "tile application")

Hello!
I need help.
2 days ago the mouse worked fine. Yesterday I noticed that the mouse scroll does not work in the "Book Bazaar Reader". Now I found that the right mouse button and left mouse button does not work in some applications, but scrolling work in these applications.
In mail application clicks work in some panels, scrolling doesn't work.
In desktop mode, the mouse works perfectly.
Please help!

Hi
Since at desktop mode everything fine, i suspected some application or 3rd party SW change your mouse setting
Go to run, msconfig, run as administrator, within the System Configuration dialogue box find startup tab, find KHALMNPR (if you using logitec mouse) and uncheck it
click ok and restart
or try to do clean boot to eliminate 3rd party SW issue

Define Custom Shape doesn't work in Photoshop CS5

It seems to be impossible to Define Custom Shape in Photoshop CS5. This option in Edit menu always remains grayed out...
Can anyone check and see if this is the case in your own installation of the program?
Very same procedure works in Photoshop CS4 just fine, but not in CS5...

Hi Fox,
I think you might just have found a bug there. I've reported it upstairs.

Shutdown button doesn't work for sleeping from the home screen.

I'm using Mac Mini 2011, with Mavericks. Until Mountain Lion, when I pressed once the startup/shutdown button the machine sleeps. Now, with Mavericks, it doesn't work, we hear a beep instead. How to fix this problem?

OS X Mavericks: Using the power button

Automated batch doesn't work in photoshop & from Bridge

Similar Messages

Maybe you are looking for