Automatic changing of activity start date and time of planned orders in SAP

Hello experts,
I have a requirement that in the transaction /SAPAPO/SEQ1 for the list of planned orders what ever we get in the sap we have to swap the activity start date and time for two planned orders which we select automatically. For this I have found the BADI "/SAPAPO/SEQ_VISUAL01".
Now i am able to identify the two selected planned orders inside the BADI method SEQGRID_TOOLBAR_OKCODE_HANDLE.
Now my requirement is i have to swap the start date and time for these two planned orders automatically i.e. through BAPI or any FM.
Any idea of any BAPI or FM to change the details of the planned order.
Thanks,
Sanath.

Hi Sanath,
Please check this BAPI BAPI_MOSRVAPS_SAVEMULTI3.  This Bapi has the provision of chaning Planned Order & Production Order Data. Also, you can explore more info on available bapis in the T-code 'BAPI'.
Thank you,
Santosh KB.

Similar Messages

  • I "restored" my Apple TV and now it is 37 hours into the step, "activating the date and time"? I am stuck.

    My Apple TV stopped working while watching a Netflix show and the light on the box started blinking. It seemed like all I could do was "restore" which I did. Then in the process of restarting the Apple TV it said "activating the date and time".It has been stuck on this spot ever since (2 days). Everytime I turn the Apple TV back on to see where it is, it is still on this step. As for my choices on what I would call the main screen, I can either go to "Settings" or "Computers". All the numerous choices available (Netflix, Podcasts, NBA, MLB, You Tube, etc, etc) are not available..not even on the screen. This Apple TV box is pretty much useless at this point. Any advice??

        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.

  • Show active current date and time in a Form continuously

    Hi,
    I am use Oracle Form 10.1.2 in Windows 2000.
    Can we show an active current date and time in a Form continuously?
    Perhaps in the main menu form.
    So the user can see the moving time, instantly when the time change (withour pushing F5 for refreshing the form)
    23-Sep-2006 06:00
    -- one minute later will show
    23-Sep-2006 06:01
    -- one minute later will show
    23-Sep-2006 06:02
    -- and so on
    Any help is appreciated.
    Many thanks,
    Buntoro

    Here is a quick, untested suggestion that sketches out one way of approaching this.
    If you only require updates every 60 seconds, you can use the TIMER built-in to create a repeating timer with a sixty-second delay. Each time the timer expires, update a text item to reflect the current time (obtained by selecting SYSDATE from DUAL on the database.)
    If the time is to be updated precisely when the minute changes, use two timers -- the same one described above, and a one-shot. Before you create either timer, run the following query:
       SELECT 60-TO_NUMBER(TO_CHAR(SYSDATE, 'ss')) FROM DUALThis will give the number of seconds remaining until the minute changes. Use this value to set the duration of the one-shot timer. When it expires, create the repeating sixty-second timer.
    There is a good possibility that this method will not be terribly precise, depending on factors like server resources, user load and network distance. A more network-friendly approach would be to use a JavaBean that relies on the PC's system timer to track the passage of time, and calculates server time based on the observed time difference between PC & server.
    Hope this helps,
    Eric Adamson
    Lansing, Michigan

  • Difference between a starting date and time and ending date and time

    Hi All,
    I need to bring out the difference between a starting data and time and ending date and time. Difference should be in time I mean it should be in hours or minus or seconds.
    I am sure there must be a Function module for this, Has anyone of you been in search of this kind of FM, Kindly suggest me. It is urgent.
    Thanks
    Mahen

    Hi,
    Check this out.
    data : date1 type dats ,   " System data type for Date (sy-datum)
           date2 type dats,
           time1 type tims,      " System data type for time (sy-timlo)
           time2 type tims,
           days  type i,
           scd   type i,
           t_mt  type i.
    days = date1 - date2. " Diference in days.
    Scd  = time1 - time2. " diference in seconds.
    t_mt =  ( days * 24 * 60 ) + ( scd / 60 ).
    total diference in minute
    <b>Reward Points & Mark Helpful Answers</b>

  • How Production Order finish date and time is being comptued by SAP?

    Hello Expert,
    How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
    how does SAP compute the time 13:28 as it finished time
    Please explain me briefly.
    Thanks
    Ryan

    Hello Guys,
    When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
    thanks

  • Trying to connect apple tv brand new and the screen says 'activating' setting date and time indefinately

    just trying to connect to apple tv for the first time and the screen just stays at 'activating' setting time and date and wont let me sign in to itunes sharing until the date and time thing is fulfilled.  any thoughts on troubleshooting this issue?  thanks

    Hi I had same problems and couldn't understand most of the solutions on offer as I'm a bit of a Luddite. The problem seems to be getting ATV to register your network time and date details following the upgrade of software. I use a wireless connection at home and my firewall was blocking the ATV from obtaining this information. Instead of changing router settings, firmware etc (which is beyond me) I solved it this way:
    1. Rather than use my existing wireless connection I connected the ATV to my iPhone personal hotspot (iPhone has 3G connection). It may be another network could also be effective.
    2. ATV connected via the iPhone no problem apparently got the network time and date settings ok.
    3. The previous ATV functionality was restored.
    3. I then disconnected from my iPhone hotspot and re-connected to my main wireless connection. All worked fine.
    It seems what you need to do is side-step the router firewall problem. Hope it works for others.

  • Manual creation of PPDS Planned Orders by start date and time

    Hi,
    When an order is manually created in any ppds standard transaction the start date is calculated according to the availability date entered, the order quantity and the master data 
    Is it possible to manually create an order based on the start date and then the availability date is calculated according to the order quantity and master data?
    Thanks
    CTF

    CTF,
    You can 'forward schedule' manually created orders.
    Scheduling direction is dependent on the Strategy profile.  During order creation, you can change this.
    When on the order create screen (/sapapo/rrp5), select the strategy button at the top.  This will bring up the default strategy for your userid.  You can alter the "planning direction" to be 'forward' or 'forward & reverse' depending on your business requirements.  Selecting Save will then make this scheduling strategy your default; otherwise just hit green checkbox.
    Now the order entry screen will have 'start date' entry box.  Avail date will then be calculated.
    Best Regards,
    DB49

  • Automatic file generation using system date and time

    Hi guys,
    Iam trying to generate a path for file creation automatically using System date and time. I am running into errors with respect to special characters in filename. I am trying to parse the string to get date and time without the '/' and ':' but have not been successful. is there a better way to do it? Please help! I am trying to avoid a dialog box for user to enter a filename.
    Thanks!
    V
    I may not be perfect, but I'm all I got!
    Solved!
    Go to Solution.

    here is a little experiment .... building the path out of %m (month) %d (day) %(year) type stuff might help.
    Attachments:
    putting time in path.vi ‏7 KB

  • Changes in basic start dates and its effects

    Dear All ,
    Greetings!!!!
    Can you please guide me in "changes in basic start dates in Prod Ord".
    Actually,We are now starting to plan order creation as following parameters:
                                                     Schedulling type:- Capacity req only.
                                                     Finish date:- 31st(or last date of that month)
                                                     Start date:- 1st( of that month).
    Is it possible to change the dates now for existing Production orders.
    What will be its effects
    It is a kind request to you,to please guide me and correct me if I am wrong .
    Thanks

    Rahul ,
    yes you can change the date of existing production order , only difference it will make is you need to reschedule it and you may face soem capacity availability problem , as the start date for all the order will be same.
    other then this i dont see any issue in it.
    wait for experts suggestion from the forum.
    Hope it help you
    Regards
    Ritesh

  • Activation:  setting date and time:

    Setting up my new apple tv and activation is stuck on setting up data and time.  I have tried everything from restore to reset to restart.  Even had support team on the phone.  Any known solutions?

    If you are using ethernet  cable connection to your LAN, and you are running 5.1 software, you can try disconnecting the cable and connect to your router using wifi network.  There is a bug in 5.1 that causes problems with certain routers.  The bug is fixed in 5.1.1, so you can plug the ethernet cable back in after the update.

  • BAPI to change notification task completion date and time

    Hi,
    I am looking for a BAPI which will modifiy completion date and time of an existing task of a notification.
    I was trying with BAPI_ALM_NOTIF_DATA_MODIFY but it doesn't have fields which can modify those fields.
    Looking for your help. Can directly update QMSM table
    should be a way?
    Thanks,
    Mainak

    Hi,
    Use the Method ISUSMORDER.technicalcompletion.
    Hope it helps.
    KR,
    AAL!

  • Release date and time for Purchase order

    Hi Masters,
    Could you please let me know that in which table the release date ane time will get stored for purchase order.
    Regards,
    Panneer

    Hi,
    You can find out from CDHDR & CDPOS table.
    Select Date Time from CDHDR table & Join with CDPOS table where CDHDR-OBJECTCLAS = EINKBELEG and CDHDR-OBJECTID = PO number and CDPOS-TABNAME = 'EKKO' and CDPOS-FNAME = FRGZU and CDPOS-VALUE_NEW = 'X'.
    You will get the date time from CDHDR table.
    Regards,
    Udayasankar Rajagopalan

  • Integration with Outlook - how to increment end date and time from start date/time

    Hi,
    I want to add a variable amount of time to an appointment start date and time in outlook, through vba in access.  Code below shows what I've done:
    ======================================
        Dim olApp As New Outlook.Application
        Dim olAppointment As AppointmentItem
        Dim myRequiredAttendee As Outlook.Recipient
        Set olAppointment = olApp.CreateItem(olAppointmentItem)    
        With olAppointment
            .Start = DateValue(strStartDate) + TimeValue(strStartTime)
            .Duration = intDuration
            .End = DateValue(strStartDate) + ????????
    =======================================
    What do I replace the ????? with so that it increments the start time by any duration I decide in minutes?  Using the duration doesn't seem to work and I also want to be able to have the appointment span a number of days, e.g. could start at 930am on
    Monday and end at 10am on Weds, but want to set the end time relative to the start time.
    Thanks,
    Chris.
    _________________________________________________________ Every day is a school day!

    I've tried that, but it throws out a datatype mismatch error :(
    It would be helpful if you posted the exact code you tried.  In my tests, setting teh .Duration property appears to work.  However, if you want to set the .End property to a specific number of minutes after the date/time of the .Start property,
    this works for me:
    With olAppointment
    .start = DateValue(strStartDate) + TimeValue(strStartTime)
    .End = .start + TimeSerial(0, intDuration, 0)
    End With
    Assuming, that is, that intDuration contains the number of minutes the appointment should last.
    Dirk Goldgar, MS Access MVP
    Access tips: www.datagnostics.com/tips.html

  • Set date and time

    I recently updated the apple tv .It was fine after the update although i did not use it as i was on my way out after the update.Days later when i put in on it cant seem to open itunes.reason being network time cannot be updated.i tried sighning out and now i cant sighn in.I tried reset that just brings me to a halt on screen that says activating setting date and time.Does any one know whats going on.Is the time server down ? Or something .Itune store sighn in works well in my pc ,ipad and other devices no problem.
    And i tried putting off all firewalls in router but no luck.
    Its connected wirelessly to the same router which normally works
    Any idea guys

    HI
    I have tried everything possible such as router firewall settings changing DNS servers using WIFI and ETHERNET nothing works.Waited for more updates nothing so far.The only solution is to down grade the firmware through itunes .Using now 5.0.2 works like a charm .Don't wait any longer just search apple forum for procedure and follow.Use a mac better.It takes only 5 minutes for the process.All you need is a mac or windows pc,usb cable,the type that goes behind the apple tv,(I used a blackberry bold 9900 original cable),software known as ipsw.YOU DONT NEED TO POWER THE APPLE TV WHILE DOING THIS.IT WILL LIGHT THE LED FROM PC POWER.GO TO https://discussions.apple.com/thread/4419016?start=0&tstart=0  Read procedure written by cwlown .JUST MAKE SURE FOR MAC HOLD OPTION KEY DOWN THEN CLICK RESTORE .POINT TO THE DOWNLODED ipsw AND RUN.FOR WINDOWS HOLD SHIFT THEN CLICK RESTORE .POINT TO Ipsw download and run.There is no neen to unzip or extract ipsw.I had a problem when using windows xp ipsw did not show up as an upgradeable firmware therefore could not run it.I did not want to waste time and used the mac instead.I think renaming the ipsw in windows could have cleared the problem.Another thing is after the downgrade itunes will say that your APPLE TV is restored to its factory defaults don't worry the job is done ,check your software on the APPLE TV THROUGH your tv LOCATED at general then about.SETTING up the ATV first connect the wifi or lan cable select location first THEN sign in.

  • Credit block and release Date and time

    Dear All,
    I require a report which can display credit block status date and time and  credit release status date and time for sales order. I have gone through the report RSSCD100 with object class VERKBELEG.It is not fullfilling the requirement as it only display change information.
    If customer has already exceeded the credit limit and new sales order has been generated then this report will reflect its blocked status.
    Kinldy help
    Thank you,
    NoMi

    Hi,
    IF it is not mentioned in single program .
    You can develop a query by using multiple program. Please find the list of programs for CM
    +Reports for Credit Management+
    The following table provides an overview of all the reports available to you in the area of credit
    management
    Program Function
    RFDKLI10 Customers with missing credit data
    This report checks the data for the credit limit for completeness, and produces
    the corresponding error lists. These can be used to re-maintain the
    corresponding definitions manually, or per Batch Input.
    RFDKLI20 Reorganization of credit limit for customers
    This report enables you to reorganize the credit limit information in the control
    areas.
    RFDKLI30 Short overview credit limit
    The report lists the central and control area-related data per customer.
    RFDKLI40 Overview credit limit
    The report provides you with an extensive overview of the customeru2019s credit
    situation.
    RFDKLI41 Credit master sheet
    The credit master sheet enables you to display and print out the customer
    master data for a single account, which is needed for the area of credit
    management.
    RFDKLI42 Early warning list
    The early warning list enables you to display and print out customers in credit
    management, who are viewed as critical customers in the area of credit checks
    in SD.
    RFDKLI43 Master data list
    The master data list enables you to display and print out customersu2019 credit cards.
    In particular, you can display information not contained in the standard system,
    for example, user-defined fields or external data, which you have created with
    specific additonal software.
    RFDKLI50 Mass change credit limit data
    This report allows quick mass change for master data in credit management.
    RFDKLIAB Change display, credit management
    With this report, you can display changes for credit management master data for
    all accounts.
    RVKRED06 Checking blocked credit documents
    The report checks all blocked documents from credit view. The report is started
    in the background, and should run after the incoming payments programs.
    FI/SD - Credit Management/Risk Management SAP AG
    Reports for Credit Management
    RVKRED77 Reorganization credit data SD
    The report enables you to reorganize open credit, delivery and billing document
    values. It is used, for example, when updating errors occur.
    RVKRED08 Checking sales documents which reach the credit horizon
    The report checks all sales documents, which reach the dynamic credit check
    horizon, as new. The report runs periodically, and should run at the start of a
    period. The period for the u2018date of the next credit checku2019 is proposed from the
    current date, with the help of the period split for open sales order values.
    RVKRED09 Checking the credit documents from credit view
    Released documents are only checked if the validity period for the release has
    run out (number days).
    RVKRED88 Simulation reorganization credit data SD
    REgards,
    Krishna O
    Edited by: Krishna O on May 20, 2010 11:30 AM

Maybe you are looking for