Automatic clearing in EBS

Hi All
When I am uploading the statement in FEBP through IDOC, I am getting error" F5263, difference is too large to clear". and not able to clear the posting are 2 i.e. subledger clearing not happening.
If any come acrossed the same situation requesting you to assist me.
Looking for help.
regards
Madhavi

Hello,
In the file that you have received from bank should contain the reference or invoice number.
You should use the relevant algorithm in order to clear automatically by the system.
Please refer SAP note
Please go through SAP Note. 48854.
You need to configure the algorithms at the same place where you configure "electronic bank statement global settings"
Entries will not be cleared automatically, in case if you do not have reference of invoice number in your bank statement.
Then you need to visit FEBA_BANK_STATEMENT and clear manually
Regards,
Ravi

Similar Messages

EBS Customer open items automatic clearing within tolerances

Hi Experts,
We have already implemented Elecronic Bank Statements automatic uploading functionality. As part of this process, customer open items need to be cleared automatically.
As per the standard process, SAP will be able to clear off the open items ONLY if the collection amount (reflected in MT940) is exactly equal to the invoice amount (reflected in the open item). But general practical situation is that customers may under / over pay. For example, if the customer invoice is for USD 100,005 the actual payment from the customer could be for USD 100,000. In this case, it is normal business practice that open item will be cleared off rather than keeping balance USD 5 in ledger and chasing the customer.
So tolerances are already set up both at GL account level (Trans OBA4) and customer level (Trans OBA3) with blank tolerance group with permitted payment difference of USD 15. And no tolerance group is assigned to the customer master. Also account determination is maintained for the differences with nil reason code.
Inspite of all these settings, I am getting an error message indicating that the difference is too large for clearing while trying to upload this bank statement. Here the difference is only USD 5.
My doubts are:
1. Does the standard EBS program RFEBKA00 considers the permitted payment difference tolerances set in transaction OBA4 and OBA3 ? I don't need to post the differences with reason code. That's why account determination is maintained with blank reason code as well.
2. SAP Note 124655 (Point No 3) says that entering reasons for differences is not possible in the standard system through EBS. Does that mean clearing of open items WITHOUT reason code is possible ?
3. SAP Note 549277 (Point No 5) says that even though Note 124655 specifies certain functionalities as not supported in standard system, they can be achieved by customer through user exits. Does that mean it is possible to code in the user exit saying that system should consider the payment difference tolerances for clearing off of the open items ?
Could you kindly let me know your experience with these questions. I will be very glad to hear from you. Thanks for your time.
Warm regards,
Sridhar

Hi Experts,
I got this resolved by using the enhancement FEB00001. If the field "Distribute by age" is activated through this enhancement, then system will be able to match the paid amount and the combination of open items for automatic clearing. If there is no exact match, then automatic clearing through FF.5 is not possible as indicated in SAP Note 124655.
There is no more necessity to use BAdI FIEB_CHANGE_BS_DATA. Complete relevant logic can be maintained directly in the enhancement itself.
Have a nice day.
Regards,
Sridhar

EBS- Automatic clearing & posting to customer on-account

Hi FI Experts,
I'm hoping that you can help with the following SAP electronic bank statement (EBS) setup:
In EBS configuration, we have setup posting rule to clear customer sub-ledger (posting type 8). This is achieved using algorithm 31 u2013 Doc number search (customer no from doc line). So when MT940 file - note to payee field has correct doc number (invoice no), system clears the customer open item automatically
Now the requirement is if the note to payee field doesnu2019t contain correct document number (or missing doc number) but has the correct customer number- Is it possible to post the amount to the customer account based on the customer number available in the file? Business team can clear it against the invoice later manually. In summary, if doc number is available system should clear customer open item; if doc number is missing but customer number is available system should post the incoming amount to the customer account.
Is it possible to setup the above logic using standard EBS rules; if yes how? or do you reckon a development is needed?
Appreciate your inputs
Thanks,
Kalyan

Hi Experts,
I got this resolved by using the enhancement FEB00001. If the field "Distribute by age" is activated through this enhancement, then system will be able to match the paid amount and the combination of open items for automatic clearing. If there is no exact match, then automatic clearing through FF.5 is not possible as indicated in SAP Note 124655.
There is no more necessity to use BAdI FIEB_CHANGE_BS_DATA. Complete relevant logic can be maintained directly in the enhancement itself.
Have a nice day.
Regards,
Sridhar

EBS: Automatic clearing of customer open items

Hi Experts,
I am setting up the electronic bank statement with format MT940 structured with field 86. As part of the scope, business is requesting to ensure that customer open items gets cleared automatically when the bank statement is uploaded through transaction FF.5. Because bank statement contains entries relating to payments by customers into the bank account.
But here the problem is that customers will provided ONLY the name. They do NOT provide either the invoice reference number (XBLNR) or our accounting document number (BELNR).
I have searched a lot and found out that I can use the BAdI FIEB_CHANGE_BS_DATA to get the SAP customer number from the customer name given in Notes to Payee fields of MT940. Kindly correct me if I am mistaken.
Now from the derived customer number, I need to find out the related open items which match with the amount given in MT940. So, how does the system know which open items can be cleared for the given amount. Because the paid amount (by the customer) can be for an individual invoice or for a couple of invoices together. Do I need to use the enhancement user exit FEB00001 to specify the system to use fields "Distribute by age" and "Automatic search" field in transaction F-32 ?
Or is there any other better way of achieving this objective of automatic clearing of open items. Asking our customers to provide the invoice reference number is not an alternative since it has already been tried a lot for long without any result. So, business has requested for the set up in our system to ease this process of automatic clearing of open items.
Thanks you so much for your time to help me on this. I will be waiting for your kind responses.
Regards,
Sridhar

Hi Experts,
I got this resolved by using the enhancement FEB00001. If the field "Distribute by age" is activated through this enhancement, then system will be able to match the paid amount and the combination of open items for automatic clearing. If there is no exact match, then automatic clearing through FF.5 is not possible as indicated in SAP Note 124655.
There is no more necessity to use BAdI FIEB_CHANGE_BS_DATA. Complete relevant logic can be maintained directly in the enhancement itself.
Have a nice day.
Regards,
Sridhar

Error : (F5 263) The difference is too large for clearing in EBS in t code FF_53wq

hi
Could anyone please help in this case, if FEBP can be used to clear the open items automatically.
Also, the interpretation algorithm used in global config is '001- standard algorithm'.
Please suggest if automatic clearing of subledger can be achieved in some other way after we run FF_5.
Thanks in advance
praveen

Hi Praveen, The reason for this error is that the clearing information is not getting identified for your bank statement. The clearing information, if successfully identified, gets added in the table FEBCL with the clearing field like XBLNR or BELNR and its corresponding values. Please, search SCN forums for more information on this error as its a very common error and you will find many explanation on SCN for the same. You will also find good blogs on EBS for better understanding of the complete configuration part and process. Thanks & Regards Nikhil Kothari

F.13 clearing for EBS entries

Hi Friends,
Unable to clear the bank subaccount in f.13
We are using ZBRS transaction for EBS upload. When upload the file the cheque number is assigning as the text fields .when uploaded in to Sap That time entry must be
Bank outgoing a/c
To main bank a/c
Cheque number is available in text field
When passed the f-58 the entry must be
Vendor a/c
To bank outgoing a/c
Cheque information is available at document environment level
But when we trying to clear the f.13 bank sub accounts we are unable to clear
Normally we want to clear as check number information wise
For EBS entries check information available at text level
I want to get the subsequent document number (f-58)with the check information .
How to get the check information at line item level to clear the entire for f-58 transaction
Kindly let me know the how to clear the bank entries in f.13
What are all the reference are available to identify the entries
If automatic clearing process let me know how we have to make the settings for EBS
Kindly explain the F.13 automatic clearing for bank entries how to make the settings for EBS
Thanks in advance
Regards,
Jyothi

problem resolved

Automatic Clearing - Open Item GL Account

Dear Friends,
We have created the Bank Clearing Account as an open item management account. The account would be credited while making the payment to the vendor thru automatic payment run and debited once the payment has been cleared from the Bank. We would like to do the automatic clearing of the open items like GRIR account. Could you please advise what maintenance is to be done on the Config side and which T Code is to be used.
Thanks for the help!
Regards

Dear Raj,
Bank clearing accounts is used to for Bank Reconciliation purpose . If you like to automate this process you have to configure Electronic Bank Statement process. You can check the below links
http://wiki.sdn.sap.com/wiki/display/ERPFI/ElectronicBankStatement
http://www.sap-img.com/financial/customizing-an-electronic-bank-reconciliation-statement.htm
Note: There are so many posts with regards to Electronic Bank Statement process, you can search from the forum also.
Thanks and regards
Praveen.J

Payment order clearing with EBS in SAP

Hi All,
I am little confused with Payment order clearing with EBS. Actually the process is as below.
1. We create an invoice for Vendor - FB60 / MIRO
2. We make the payment through F110, which creates a payment order but this will not post the payment document. Here, the payment order will be generated for payment ref.
We should clear that Invoice by uploading the EBS.
I have created a posting rule as below
Posting rule Z092
Posting Area 1
Debit side
Posting key 25
Acc Symbol (Debit) - Blank
Credit side
Posting key 50
Acc Symbol (Credit) - Main Bank Account
Document type - KZ
Posting type - 1
Assigned Ext. Trans. Type to posting rule as below
Ext. Trans. Type 702 + Posting rule Z092 Interpretation Alog - 29
The below is the error i am getting while uploading the EBS stmt in FF_5
I am getting the error saying "Error: (F5 104) Vendor * is not defined in company code XXXX".
The Accounting entry should be
Dr Vendor A/C
Cr Main Bank A/C

Hi Raju ,
The Problem seems to be that the payment order number is extended with your company code number due to which the system is not recognizing your payment order. Give one more try by just entering the payment order number and deleting the co code and year after that, just like below.
88,0000002157
88,/06590719801706 0000002157
88,0000002157
Thanks,
Suresh

GL account automatically cleared by the bank statemetn document

Hello all,
I would like to ask you a question.
We have done the payments by payment run to the vendor , FI document 2000008482 has been created, Then we received the bank statement which created the document 101481822 and the GL account used for this payment 2435000022 was automatically cleared by this bank statement documents 101481822
Usually they do manual clearing by f-03 but for the accoutn 2435000022 its automatic
I have 2 questions
1. where in customizing you set up this option that the GL account is automatically cleared when posting bank statement
2. if they need to reverse payment document, how this could be possible? as if they want to reset the clearing docuemtn, they would have to reverse the bank statement document
thanks for your feedback, its reallt apprecited
regards
Hana

You should feel happy if the system clears the payment document. This what the behavious is expected.
When you made the payment it goes to bank sub account, then when you upload the bank statement, then the system expects to clear based on the cheque number etc.
However, if you do not want you can still stop them from clearing and then entry only gets posted. But again, you will be doing the same job what the system is doing by using F-03 or F.13
Please check your posting type against the posting rule
SPRO ==> Bank Accunting ==> Business Transactions ==> Electronic Bank Statement -==> Make Global Settings for Electronic Bank Statement ==> Posting Rules
Thanks,
Ravi

Billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc.

Hi All,
In case of billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc. no. Each time user has to clear the doc. manually. We have observed this issue after recent patch updation dated 22nd Feb’2014. Till 21st Feb’2014 the cancelled doc. has been cleared automatically against their respective billing documents.
Please guide.
Thank you.

Hi Gopi,
Please chheck SAP Note No. 1259505. It explains two ways in which SAP releases cancellation documents to FI.
OSS NOte 1259505 lists the possible causes from SD side &
OSS Note 309208 lists the possible causes from FI side.
Regards,
Kavita

Automatic clearing of open items

hi,
we have customers with 'dummy-invoices' in our system.
There is a document in FI with a value of 0,01 Euro on the customer.
this document is an open item and never will be cleared.
is there any possibility for automatic clearing of such open items ? program SAPF124 does the clearing
only when there is a second document, right ?
reg, Martin

Hi,
Clearing is always against counterpart; that's the concept of this funcionality.
Regards,
Eli

Scheduling of Automatic Clearing (FPMA) of FI-CA Open Items in background

Hi,
I was trying to schedule daily runs of Automatic Clearing (FPMA) in background using SM36. I understand that running Automatic Clearing of Open Items on a periodic basis is a usual practice in the Utilities industry.
However, SM36 is throwing an error message saying "Program SAPLFKKAKTIV2 cannot be scheduled (not of type 1 or J)", when I am specifying SAPLFKKAKTIV2 as the ABAP Program to be run on a daily basis.
I shall be grateful if somebody can suggest a solution for this.
Thanks and regards,
Arijit Mitra

Hi, i am using a program for schedule FPMA and in the output returns these error :
FKKKO table : incomplete data.
Missing Data : BLDAT or BUDAT or BLART or WAERS.
I am using Mass Activity Type as 0004.
Additionally , the Standard SAP program RFKK_MA_SCHEDULER in FICA,
returns the same errror.
Can someone help me?
Kind Regards
Daniele

F.13 automatic clearing G/L Account in Amount in Local Currency

Hi gurus:
I need a lot of help with t-code F.13.
I need clearing a lot of line items in one GL Account. every one has the same Assignment Number and has in local currency (CLP), but one of them is in USD.
When i call the transaction, I fill the follow fields, but the system doesn't clear the items and shows follow message "B No clearing (difference too large)" .
Company code                    CMF
Fiscal year                     2009
Assignment                      2009
Select GL Accounts        X
G/L accounts                    21070016
Clearing date                   30.06.2010
Clearing Currency               CLP
Permit individual line items   X
Include Suppl Account Assign X
I tried with the follow configuration in OB74
S     21070016     21070016     ZUONR     DMBTR
But system cleared certain items, not everything.
¿How can I do a automatic clearing when i have documents with differents document currency? ¿Is it posible to do a residual items from F.13?
Greetings and anticipated thanks
Marco

Hello Raj:
Thanks for your reply. Look, the difference that I found between both t-codes is the field: Clearing Currency.
I've executed many times with that field empty and CLP. But the result is the same "No clearing procedures were carried out".
Also I've tried with different combinations of this checks:
F124BVK - Special Processing (Clearing Currency from Assignment Field) (I dont know how to configure this)
F124ALW - Expiring Currencies
F124TOLEB - Consider a Single Line Item for Tolerances
F124NKON - Include Supplementary Account Assignment
What can I do now?
Thanks a lot
Marco

Automatic Clearing F.13

What is the prupose of using F.13 . Is it the same as F-44 if we are using it to clear vendor items. When do we need to do this. Is it after making paying the open items. I went into F.13, then checked all vendors. I got a list of document numbers with the amounts. And bekow that got a log below that says "account selected but is not entered in tableTF123" what does this mean.
Suppose we want to clear G/l items do we use the same transaction?
ANother question does MR11 does the same clearing as F.13. For eg, if we run MR11 and clear GR/IR, wont it do the same in F.13 to that G/L account
I am not able to clear vendor open items through F.13, though they exist. It is confusing. Can someone guide me through the whole process adn why do we use f.13, what all it does.

Hi
Manual Clearing of G/L , Vendor and Customer are done at F-03 , F-44 and F-32.
Automatic Clearing of all these G/L , Vendors and Customers are done F.13.
F.13 includes all the three F-03 , F-44 and F-32.
regarding MR11 , Cancelling of Goods Receipt is done at MR11 but Clearing is done at F.13.
For Example ,
suppose that you have a goods receipt for a quantity of 12.You got the invoice receipt for a quantity of 10 only.then if you go to MR11 it will show the difference of quantity of 2.And you have the information that you will not receive the remaining quantity of 2.You will cancel the goods receipt of quantity of 2 using MR11.
MR11 displays and cancels the goods receipt but doesnt clear.
Clearing is done at F.13 Automatic clearing.
regards
Venkat
Edited by: Venkat Dara on Dec 8, 2008 8:45 AM

Automatic Clearing of GR-IR Clearing account

Dear all
In f.13 i am not able to do automatic clearing of rg-ir clearing account ,i am getting the massage no clearing procedures are carried out despite all selection criterial fulfilled .
This is needed because i want only credit balances in GR/IR account after clearing which i will get in FBL3. There both the credit and debit entries are coming . Is it possible that if GR and IR is completed for perticular material amount is same then it sould not appear in report fbl3.
vijay

Hi,
Before performing the GR/IR Clearing, just to ensure that there are no open debit entries in the GR/IR Account, run the report thru the T Code "MR11" - Maintain GR/IR Clearing Account. While specifying the parameters, under the 'Clear Tab' check the boxes for GR/IR Clearing Account as well as Delivery Costs, this will take into account all GR/IR entries, ones meant for materail cost as well those for planned delivery costs. Under the 'Surplus Types' Tab check for Delivery Surplus as well as Invoice Surplus. Since we are just running a report ensure that under the 'Processing' Tab - "Automatic Clearance" is UNCHECKED. In the quantity variance put 100%. Exececute the report and all cases wherever there is a difference between the Quantity delivered and Quantity Invoiced, will get reported. Look for the cases where the Difference Quantity appears in minus. These are the cases where the quntatity invoiced is more than the quantity delivered and will result in open debit entries in GR/IR Account, even after the GR/IR Clearing is performed thru F.13. Investigae these cases and take appropriate action.
Assign points if found useful.
Thanks.

Automatic clearing in EBS

Similar Messages

Maybe you are looking for