Automatic configuration URL syntax in 4.01 is not recognizing the file:///// syntax which use to work in 3.6.18. Is this a bug or an intentional change?

Hi, we noticed this difference today. We use a centralized PAC file located in a network share. This used to work for versions 3.5-3.6, it is not working for 4.01. Was this an intentional change or a bug?
The workstation running firefox is running windows 7.

thank you all.
Billy and William - what is rellay going on is that we have one cantrel pipelined function - not many.
we recently enctored a strange ora-600 that realte to it.
as a workaround we decide to rewrite the function,
and as a resolt to re-write some of the sql that use it.
and by doing so i notice that. (one can use a column as an argument).
i know that my last sql is invalid - i only though that the same must go
for pipelined function and the whole script show this line of thought.
SomeoneElse - you are right but it will give the same error even if i put data_numbers.id
Elic and William - thank you very much. now i am happay.
i search every document, expet from the sql manual (i looked at application dev, cartarige, etc).
this goes to show that every day I learn something new.
Amiel
re-reading the whole thared i realized that i wasn'nt
clear enough and the typo must have been confusing
i know that either:
select *
  from data_numbers,
       (select g.id column_value
          from data_numbers g
         where g.id = data_numbers)
where id = column_value
   and id = 1;or
select *
  from data_numbers,
       (select g.id column_value
          from data_numbers g
         where g.id = data_numbers.id)
where id = column_value
   and id = 1;don't suppose to work
(i ment to wrote the second sql...)
i was only concluding that the same goes for pipelind function.
Message was edited by:
Amiel D.

Similar Messages

  • I want to upload a Banner to my iTunes U page. The banner file has all the requirements like as, kind, size, frame, and etc. Infortunately,  I could not upload the file. It does not show in Provider Page Configuration or the preview.   Someone could help

    I want to upload a Banner to my iTunes U page.
    The banner file has all the requirements like as, kind, size, frame, and etc.
    Infortunately,  I could not upload the file. It does not show in Provider Page Configuration or the preview.
    Someone could help me?

    Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

  • IOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings

    iOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings via a Configuration Profile. Has anyone else got the same issue? Are Mac users got this issue?

    This seems to be working for me now but will keep monitoring it the next couple of times I use it to make sure its not a one time thing

  • HT201320 how can i stop automatic configuration of email accounts on my ipad...the ports are not correct and i cannot access my email

         i cannot get my "frontier" email account set up on my ipad so that i cannot either or receive email.  Frontier says that the "automatic" verifying tool puts the wrong ports in and that is why i cannot get or send emails from the ipad.  We know we have the correct name and password in but when in comes to verifying, an error message comes up and says "the wrong user name or password has been entered".
          How do i disable the automatic set up of email so i can be assured the correct ports are enabled?

    -Tap "Settings" app,
    -Select "Mail, Contacts, Calendars" option on the left hand side,
    -On the right, under "Accounts" on top, tap "Add Account...",
    -Select one of the email service providers or "Other",
    -Under "Mail", tap "Add Mail Account",
    -A window pops up and enter your new email account details.
    -Repeat for new email accounts.

  • Configuration Failed - Could not load the file or assembly Microsoft.IdentityModel

    I have followed the link "Setting up Sharepoint 2010 Development Environment on Windows 7" and while
    following the steps, I was not able to install one of the pre-requisite "Windows Identity Foundation (Windows6.1-KB974405-x64.msu)" which was downloaded from Microsoft website at URL:
    http://www.microsoft.com/en-us/download/details.aspx?id=17331, however, I was able to complete the SharePoint Server 2010 Installation Successfully. And to my surprise, when I run the
    SharePoint Products Configuration Wizard, in the very 2nd Step of configuration, I faced the below issue.
    Configuration Failed
    One or more configuration settings failed. Completed configuration settings will not be rolled back. Resolve the problem and run this configuration wizard again. The following contains detailed information about the failure:
    Failed to create the configuration database.
    An exception of type System.IO.FileNotFoundException was thrown. Additional exception information: Could not load file or assembly 'Microsoft.IdentityModel, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
    dependencies. The system cannot find the file specified.
    To diagnose the problem, review the application event log and the configuration log file located at: C:\Program Files\Common Files\Microsoft Shared\ Web Server Extensions\14\LOGS\PSCDiagnostics 12_13_2013_8_30_44_220_403724746.log
    I am pretty sure that I have followed each and every step and understood and the only place that I have missed is installing the pre-requisites as mentioned above. How can I fix this issue.
    Let me know if you need more information such as log file content which got generated. Your help in fixing this issue will be really helpfull for me.
    Thanks
    Mahesh

    Hi  Mahesh,
    Thank you for your posting!
    Your issue is caused by that  your windows 7 is not installed Windows Identity Foundation.
    As you say that you were not able to install the Windows Identity Foundation, could you provide more detail about what  you are facing ? Which version of Windows 7 you have? 32bit or
    64bit? Also make sure your computer has installed Internet Information Services (IIS) 7.0  and  .NET Framework 3.5.
    Thank you for your understanding and support.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Firefox opens when I click on a hyperlink in an e-mail in my Outlook 2003 program, but does not go to the URL in the link. It used to work before I re-installed my MS XP Pro 64 bit OS. Help!

    At first, after I re-installed the OS, nothing would happen when I clicked on an e-mail hyperlink. So I went to Folder Options in Control Panel and associated Firefox with the E-mail file type. Firefox then opened when I clicked on a hyperlink in an e-mail, but just opens to the Firefox start page ("Blank page"). Firefox does not open the URL in the hyperlink. I need guidance as to how to restore this function which worked perfectly before I had to re-install the OS due to a corrupted program installer. I have run the MS Office Detect and Repair function twice--both times indicating that everything is fine--but it does not make a difference in fixing the Firefox function.
    NEW: An attempt to click on the link in Security Center to go to Microsoft Update brings up an error message that reads: "The requested lookup key was not found in any active activation context." I have no idea what this means, but I suspect it is related to the lack of ability to open Firefox to a link URL.
    See the uploaded screen print(JPEG) below.
    UPDATE: PROBLEM SOLVED!! Searched on error message on line, solution fixed problem. THANKS ANYWAY

    # Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
    # Sign back in, and you will be asked to save the password you entered.
    # This will save the password and autocomplete if you have this option turned on.
    I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

  • Why not perform the ${attribute} syntax in the jsp context with weblogic?

    In the action an attribute has been put in request object, example request.setAttribute("userName","Xue Chen").
    in the forward jsp , use the syntax ${userName}, can not get the attribute "Xue Chen" from request, but the "${userName}" be printed in the page.
    The same code with Tomcat, it work well.
    It maybe the syntax ${userName} in jsp is not standard for all application server, only work in Tomcat, or it need special confiugre in weblogic, this syntax can work.
    Does anyone do me a favors?

    Hi,
    go to the context of your view,
    to the attribute of your date,
    and set the attribute input help mode to disabled
    grtz,
    Koen

  • Configuring the file T3 servives using WLST in WLS 10.3

    Hi,
    I am trying to use WLST to configure the File T3 services in Weblogic 10.3.
    I can do it using the console.
    Please find the link for configuring through console:
    http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/filet3/TargetFileT3Services.html
    Can some one help me in configuring it through WLST?

    Hi,
    did you try to record the console configuration?

  • After automatic update and restart of Nightly , you can not see the chars and all text of system

    I use windows 7 64 bit service pack 1 full update - hp pavilion dv7 pc - intel core i5-2450M 2.5 GHz - 6 GB RAM - firefox-32.0a1.en-US.win64-x86_64.installer - When you start the update automatic, after restart of the Nightly upgrade, I can not see most all of the charas and all text

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I have tried to add a NEW GMAIL Account into Thunderbird and after i use the automatic configuration finder and Password confirmation, it does not display

    I tried to set up a NEW Gmail account in Thunderbird But it will not display eventhough it confirms that the configuration is correct and that the password is Valid. Please NOTE that i previously was able to set up the email account correctly in Thunderbird but was encountering some errors and i therefore deleted it using the Account Actions menu.
    I have repeated this action probably probably 5 or 6 times and I still cannot see the new email account in Thunderbird. I can only see my other Gmail Account
    Would appreciate someone sharing with me a step by step answer to help me fix this problem as I have no clue

    Sounds like the Google Less Secure Application situation. Go to gmail and read what they have to say about this.
    FYI: Deleting and reinstalling accounts or Thunderbird software is not the best way to solve problems. It usually never solves a thing and can cause more issues as you are seeing. It is best to troubleshoot what you have and fix those issues.

  • I want the website that I type into the address box to open in a new tab automatically, not replace the tab/page I am already on. How can I do this?

    Automatically open a tab by typing in address box.

    You can middle-click the Go button on the location/address bar to open the URL in a new tab and press Alt+Enter.
    You can search the Add-ons website to see if there is an extension that includes this feature.

  • HT201317 my photos on my iphone 5 used to automatically load onto my PC.  I did not do the upgrade to my iphone because i don't like the new look.  Could this be what is stopping the auto upload of the photos onto my photostream ?

    Photos on my iphone 5 stopped automatically loading onto my PC.  I have tried everything (i can think of) short of deleting the account because if you delete there is a warning..... all photos will be deleted..
    So any thoughts ??  I have not updated to 7.0 but this auto upload photostream featured still worked well until the end of October.

    Hi Edward,
    You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.  
    Manage content manually on your iPhone, iPad, and iPod
    http://support.apple.com/en-us/HT201593
    Product Feedback
    http://www.apple.com/feedback/
    Contact Apple for support and service
    http://support.apple.com/en-us/HT201232
    Take it easy,
    -Norm G. 

  • How can I get AirPlay mirroring to fill widescreen? It works automatically for apps built for apple tv, but not Hulu Plus, for example, which letterboxes.

    Airplay mirroring works great for apps (mostly video-related ones) with native Apple TV support, but for other apps - most notably Hulu Plus, it will only show letterbox on my 16:9 plasma TV. Again, my movies, tv shows and in-app videos like in CNN where there's a built-in AirPlay support will fill my widescreen, but apps that don't (Hulu Plus, games, photos) will not. Do I have to change the aspect ratio on the tv to 4:3? Will changing the resolution help.
    How can I get mirroring to fill the entire tv screen, regardless of the app? Thanks.

    Guys. Let's not get confused here.
    -AirPlay mirroring feature 'mirrors' what's on your iPad 2 or above or your iPhone 4s on to your big TV via the Apple TV black box.
    -Video apps that stream video (like native YouTube app) uses AirPlay which is different to mirroring.
    -When you use the 'mirror' feature you get black bars all around (left/right &amp; top/bottom)
    -There are Games that use the full screen via the AirPlay mirroring feature and there are games that don't. It depends on the Game. For example download Asphalt 7:Heat and you'll notice you get widescreen display on the big TV but if you play Batman or Max Payne or others that don't support AirPlay mirroring then it you get black bars left and right.
    -What's neat about the AirPlay mirror feature is that when you play Asphalt 7 with 'mirroring' set to on, the race is shown on the TV while your iPad shows something completely different (the route in real time with your rear view mirror)
    -The Apple iPhoto app on your iPhone 4s or iPad 2/3 with AirPlay mirroring feature on you get a different experience. All of a sudden it goes full screen, and you are presented with their iPhoto logo.
    -Those who have the first generation iPad don't have mirroring capabilities so the Asphalt 7:Heat games feature aren't available or the iPhoto app features. With iPad 1 you can only stream video or music or image slideshow (which all stream full screen). iPad 2 and iPad 3 can also do this but with the added benefit of 'mirorring' what is displayed on the iPad screen. Some apps take advantage of this, some don't.
    There are no special setting on Apple TV to get rid of the black bars. You may be able to change the zoom settings on your actual big TV.
    Hopefully this will clear this all up. I have the iPad 1 and recently upgraded to the new iPad 3. I also have an iPhone 4s. Same issues.
    I don't think the AirPlay 'mirror' feature has developed fully yet. It has it's limitations but also has its advantages.

  • Hi! i just bought the iPad mini 3 today with a case that supports the automatic sleep/wake lid action but i could not find the setting for the sleep/wake lid action in my settings.

    the cover i bought is from the brand called iPearl and it supports the auto sleep/wake lid action but i cant find the settings for it in my settings>general. now my iPad wont sleep when i close the lid. how do i find the option for this action in my settings on my ipad?

    The setting should only appear with the cover installed. Try settings> general> IPad cover lock/unlock> on. Thanks go to Diavonex and Chris CA from this earlier thread.
    The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work. What's going on?

  • Everytime when I quit FCP X, I could not find the file that was created previously. I'm aware files (events/projects) are saved automatically. But strangely when I reopen FCP, the event/projects are not listed.

    I need help here. Saved events/projects are not visible or listed when I reopen FCP X. Tried to open from the event folder don't seem to work.
    I'm using MacOS X 10.6.8 and just bought FCP X 10.1.
    Help.

    No. I'm not using two hard drives. Files saved on MacBook Pro HDD. Only time I use the second HD is for backup but while working on FCP X.
    This is unclear.
    Do you have another HD with FCP X projects and / or events?
    If you do (whether it's a backup or not) it will cause the exact problem you described. Make sure any other drives with FCP X events or projects are turned off before you launch FCP X.
    If you don't have a second drive with events or projects, I suggest you try trashing your preferences.
    Faults like this can sometimes be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
    Download Digital Rebellion's Preference Manager (free, simple to use, and quite safe).
    http://www.digitalrebellion.com/prefman/
    With Pref Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
    If you trash them and don't restore them, you will need to go over your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
    muhammadfromsingapore wrote:
    Thks Bob. No. I'm not using two hard drives. Files saved on MacBook Pro HDD. Only time I use the second HD is for backup but while working on FCP X. I'm getting very frustrated whenever I return to work on the video to find the file 'missing'. I know its there but it's just not showing up on the Event Browser. Sigh!!
    How come you marked your own post as "Correct Answer" when all it does is tell Bob he's wrong? This will mislead people.
    Andy

Maybe you are looking for

  • Error while duplicate database for standby

    Hello Guys, Both of my database are 10gR2 and Linux is the operating system. I am trying to create a standby database for my production database. I have matched the directory structure of primary and standby database and there is no conflict. Directo

  • Problem with BAPI_ROUTING_CREATE

    Hi all, We are using BAPI_ROUTING_CREATE to create routing for a BOM. and operation allocation to Components/materials of the top level is happening correctly however the same is not happening for the next level BOM that are deeper in the BOM structu

  • X Code upgrade from Snow Lep to Lion a pain in the ..

    having HUGE hassles trying to upgrade my X code from Snow Leopard to Lion..encountered this problem by clicking on my Xcode program only to get a message along the lines of...only worked with Snow Leopard..so I downloaded new version from App store a

  • Authorization not working

    I have a problem with authorization - I tried to play music that my brother had bought on his computer, and was prompted to authorize (it was already authorized). After authorizing the song did not play, but when I clicked on it it prompted me to aut

  • How do I roll back Acrobat DC to previous version?

    All of my Acrobat plugins stopped working when I updated to Acrobat DC and I cannot find a way to roll back to a previous version. Most other apps can be rolled back, but I cannot see where Acrobat can. How can I do this? Thank you, DE