Automatic Creation of Maintenance Order from Notification

Hello Eperts,
I need an opinion. I have a scenario where i am required to create a maintenance order automatically from a notification. I want to know the best way of doing it. Can it be done by configuration in the node> Notification processing>Define follow up actions for tasks, where based on a open status of task an order can be automatically created.
Please let me know the best way to do it.
Regards,
Boby Mathew

Hi Pete,
Thanks a lot for the reply. Based on your experience can you tell me which function module can be used to create an order if an open task exists in the notifictaion. What I am trying to do is,
in Customization >Plant Maintenance & Customer service>Maint & Ser Processing>Maintenance & Service Notifications>Notification Processing>Additional function>Define follow-up actions for tasks;
Here I am creating a follow-up action for a task as create order and thought of assigning an order create function module ALM_ME_ORDER_CREATE with modifying the subrc parameters with some return values. Can it be done this way? I am asking because I am not very sure as to what is the best way to acieve it. I want to achieve this min minimum development.
Please explain in detail.
Thanks & Regards,
Boby Mathew

Similar Messages

  • Issue during automatic Creation of Work Order from Notification

    Hi,
    I have a issue during automatic Creation of Work Order from Notification.
    BADI implemented: NOTIF_EVENT_POST
    BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
    I am able to create Work Order successfully but after that i need to update notification header with created work order number.
    But i am unable to update the same (VIQMEL-AUFNR).
    Can anybody provide solution for the same!
    Thanks,
    Kumar.

    Hi,
    Any inputs on above posted issue!
    Thanks in advance.
    Thanks,
    Kumar.

  • Creation of maintenance order from notification

    Hi experts,
    Is there any standard settings available by which I can block to create maintenance order from a notification until & unless it's system status is "NOPR"?i.e when the system status of notification is OSNO ,system should not allow to create maintenance order.
    Also in notification front page under TAB 10\TAB01(Notification1), I want to populate activites under screen area 015(item+cause) like object part,damage, cause code as my users do not want to enter the activities under tab 10\Tab12(Activities) due to the complexity it containes.
    Would appreaciate of any suggestion pl
    rgds
    rajib

    Hi Rajib,
    First one:
    Create a user status profile for the notification . In the initial status make it forbidden for the create of order. So as soon as you create the notification system will set to the initial status and will make it forbidden to create order at OSNO.
    You have to assign this status profile to the notification type you want to do. Further you can make status profile in auhtorization control also.
    refer the config path: Maintenance and Service Processing ->>Notification Processing>>User Status for Notifications>>Define Status Profile.
    Second one:
    In the config path
    Maintenance and Service Processing>>Maintenance and Service Notifications>>Overview of Notification Type
    select the notification type you want to include the activity code in the header data. click on Screen Structure for Extended View >> selec the 10\TAB01 add the 045 in the screen area , most possible it will be at 10\TAB01
    Hope this will meet your requirement.
    DP

  • Creation of Sales Order from Notification

    Hi Friends,
    I want create Sales Order from notification..
    As per Std .. Repair Order is there for Service related Sales Order Creation..
              This is Based on  QM06_FM_TASK_RMA_ORDER_CREATE  function Module ..
      I want i want normal Sales order creation from Notification..
      Is there any BADI or User EXIT is there for Sales order creation or calling Sales order creation Trnsaction from Notification..
    please Suggest the solution..

    Why not copy function module QM06_FM_TASK_RMA_ORDER_CREATE  and change as required?
    PeteA

  • Automatic creation of maintenance order before expiry of  warranty

    Hi All,
    I have a requirement to generate maintenance order automatically when a particular assets warranty is soon to expire.
    I am aware of the option to get pop-up box while creating maintenance order if the equipment is under, but this wll not meet my requirement. 
    Could you please provide your comments.
    -Vasanth

    Hi,
    you can go for general preventive maintenance plan creation. whatever your requirement is, you can create relevent task list, assign your strategy of maintenance for that asset after its warranty is over and so on up to a particular period, say 365 days.
    Then create strategy plan (IP42) and schedule it in such a way that it generate its first call object by the end of warranty and keep on generating as per your requiremnts. schedule it (IP 10), and you will get call objects (notification or order) as per your requirements.
    It is an standard SAP practice, hopw it will work for you, without any enhancements.
    Regards,
    Lucky.

  • Automatic creation of Purchase Order from Sales Order

    Hi,
    please is it possible to know the use of flag "Create PO automatically" into Sales Order Item Category customizing setting? Perhaps automatic creation of PO for Third Party sales process.
    Thank you very much
    Kind Reards
    Andrea

    Hi friend,
    You are right that chekbox is used for third party only. And it will be used when you are using ALE when you have distributed system where your sales order is supposed to be created in different system and PO will be raised in different system.
    If you activate this field, the system automatically generates both a purchase order requisition for third-party schedule lines as well as a purchase order in the background when you save the sales order. This function has been designed for Application Link Enabling (ALE) but you can also use it when working with distributed systems.
    To avoid errors caused by incorrect system settings, we recommend that you carry out the SAPEVENT OCU_LINK\DS:TRAN.BD86 for your third-party material. If you SAPEVENT OCU_LINK\DS:TRAN.PFTS tasks 8097 (create)and 8114 (change) (by choosing "Extras -> Employee assignment -> Maintain"), you will receive workflow objects in your inbox, should any errors occur.

  • Automatic creation of Maintenance Order

    Hi,
         I have created the maintenance plan. I have scheduled the plan. How can the maintenance order get created automatically as it is not possible for the users to check on daily basis.
    Thanks in advance.
    Regards,
    Maheswaran

    Maheswaran,
    In IP30,
    Go to menu path Program -> Execute in background
    Make the necessary printer settings in the Background Print Parameters popup screen and t press the green tick (or hit ENTER)
    Do the following in the Start Time screen: (1)Click the Date/Time button and enter the start date and start time for the job. (2)
    Click the Period Values button (bottom of the screen) and click the Weekly setting then save to exit popup. (3) Click the save button in the Start Time screen
    Go to TCode SM37 and check that the system has created a job called RISTRA20. Also check the frequency by double-clicking the job name.
    Have you done up to this step?
    Babu

  • Automatically creation of Purchase Order from MRP

    Material type = ROH (raw material)
    In MRP1 I have mentioned
    1. RP type =VB ( manual reorder point planning)
    2.Reorder point = 1000
    3.Lot size =FX (fixed order quantity)
    4. Fixed lot size = 300
    In purchasing I have checked the automatic P.O. option
    I have created a source list for the material and fixed the vendor for the material
    Quantiy of the material in stock = 0
    But Purchase Order is nor automatically generated during the MRP run ( MD03)
    IS there any step missing ? please suggest if any .
    Thanks in advance .

    Hi,
    As others suggested standrad SAP will not create PO as output of MRP.
    You need to check why you need AUTO FUNCTION.however you can use T code ME59n to create auto PO from Preqs.
    About AUTO PO
    One example is that while  taking delivery of the raw materials which are delivered by trucks and since it is not possible to capture the actual receipted quantity at the time of PO creation.
    To create AUTO PO
    Check in customizing whether you have maintained creation of automatic PO during good receipt.
    Menu path : MM -> Inventory Management -> Goods Receipt -> Create Purchase order Automatically -> Activate Auto PO creation for Mvt type and then activate Auto PO creation in vendor master.
    Hope this helps.
    SCMBEE

  • Automatic creation of transfer orders from goods receipt of purchase order.

    Hi experts
    The project i am currently working on requires the following;
    When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins.  I am aware that the stock goes straight into the 902 area once goods receipted.  Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
    In support of this, i have made an entry in transaction OMKX for the following;
    Reference Movement Type - 101
    Movement Indicator - B (goods movement for purchase order)
    Movement Type - 101
    TR Create Transfer requirement - X
    Immed. TO Creation - A
    Addl Data - X
    Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
    Could someone please help me
    Thanks
    Simon

    Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
    You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

  • Automatic Creation of Purchase Orders from Purchase Requisition

    Hi,
    Requirement: When the Purchase requisitions is converted into Purchase Orders using ME59N, the document type of the PO should be ZCO (Z document type for Call off) and not NB.
    Issue:When the Purchase requisitions are converted into PO's using ME59N, noremal PO's(Document type:NB) are getting created.
    As per the business requirements, it should be ZCO.
    Please guide if I am missing anything.
    With regards
       Krishna

    Hi
    Please refer the below thread.
    OSS Note 114213
    [ME59N - Automatic determination of POdocument type|ME59N - Automatic determination of POdocument type]
    Gobinathan G
    Edited by: Gobinathan Govindarajan on Nov 26, 2009 11:15 AM

  • User-exit for ME59 - Automatic creation of Purchase Order from Requisitions

    Hi,
    In ME59, is there a way to prevent PO of being saved, but instead created with the « hold » option?

    Hi,
    I tried this for ME59N and struggled.
    I think EXIT_SAPMM06E_013 cannot change EKKO (it only imports it as the exit is for posting customer data) and BAdi ME_PROCESS_PO_CUST cannot change MEMORY because method SET_DATA uses mepoheader (and later mepoheaderx). 
    Check the two structures in SE11, in our ECC5 system mepoheaderx doesn't have field "memory" so the BAdi can work out its been changed (via method SET_DATA).
    Even though lots of people have asked this question and the same exits/BAdi get highlighted I cannot see anyone confirming that they have managed to do it.
    If anyone has then please share the details.
    Thanks, Matt

  • How we can block creation of PM order from non released notification

    Hi ,
    how we can block creation of PM order from notification if notification is not released.
    Regards
    AM

    Hi Luke and Maheshwaran ,
    thanx for your reply.
    One more thing the option 2 has not been suggested by some users in the thread mentioned by Maheshwaran.
    Can I still use BS22 or option 1 is the best one.
    REgards
    AM

  • Automatic creation of production orders via planned orders

    Hello experts!
    is there a way via customizing to trigger an automatic creation of production order from a planned order when the planned order finished date is within the next week?
    thanks

    David,
    Not in customizing.
    Most people create a job step after the RMMRP000 program step in their MRP job, using program PPBICO40.  Dynamic date range is available as a selection criteria against the opening date, which is the standard criteria for selecting and converting planned orders (not finish date).
    Best Regards,
    DB49

  • Automatic creation of order from notification

    Hi,
    I am Trying to create a order from notification automatically. is it any possibility.
    as i know not possible in standard.
    is it any user exit or any other way from t-code:IW21?
    Regards,
    Shrithar

    Hi,
    By using Create button, you can create the order. But as mentioned in previous posts, you cant achieve that while saving.
    By using Create button:
    1. Order & notification integration should have been done in IMG.
    2. All the required details like planning plant, Main Work center should have been maintained in Equipment/FL master.
    Regards,
    Maheswaran.

  • Auto Creation of Order from Notification

    Hi all,
    As all of us are aware we can create notification automatically on creation of order, through Order/Notification integration setting in SPRO.
    Is it possible to create Order automatically on creation of Notification in standard SAP ?? Pls confirm.
    Thanks in advance,
    Talanki

    Hi
        Option given in ECC6.0 cration of order from notificaton automatically by direct and background
    With this option you can create the order from notification provided you need to update all the data in notificatin like funcitnal location/equipment/workcentre( so that it will fetch all the data from this master data while creating)
    then if you select the PM notification>function>order >create direct or create backgroup option then order will be created but it will throw in pop up saying details of order type and planning plant.. if you say ok...then order will be created in foreground. if you select backgroud also it will throw popup if you say ok it will create the order in back ground.
    For this you need to do the customization setting assigining the order type to notifiction so that it will automatically fetch the order type aganit the notification while creating the order.
    regards
    Krishna

Maybe you are looking for

  • Defining default field for cursor in an infotype

    What defines which field on an infotype (e.g. it0032) that the cursor defaults to.  I'm having problems due to the cursor defaulting to the "from" date field in our development clients, and it defaulting to the "previous personnel number" field in ou

  • Playlist sorting options: Syncing between Desktop/iPhone

    Does anyone know how/why playlists aren't organized the same between iPhones and the Desktop? For example, I have a playlist that I've curated using my iPhone for songs to play in a particular order. When I open Spotify on my desktop, this order is o

  • Image File:///tmp/ftproot/usb_1/.... cannot be displayed because it contains errors

    Hi, Is anyone experienced with the following error when displaying image from DMP 4305G as local or remote url? Imge File:///tmp/ftproot/usb_1/.... cannot be displayed because it contains errors . Imge Jpeg/gif file displaying fine but after warning

  • White pixel on Macbook Pro 13" Retina

    I have a white pixel on my screen. Do I need to take it in or is there an easier way to fix it?

  • User Status for Installed Base

    Hi All, Pls let me know where to maintain user status for installed base. I believe status profile could be assigned to transaction level only but still SAP help says it is possible to maintain in installed base. Also let me know is it possible to ma