Automatic creation of production orders via planned orders

Hello experts!
is there a way via customizing to trigger an automatic creation of production order from a planned order when the planned order finished date is within the next week?
thanks

David,
Not in customizing.
Most people create a job step after the RMMRP000 program step in their MRP job, using program PPBICO40.  Dynamic date range is available as a selection criteria against the opening date, which is the standard criteria for selecting and converting planned orders (not finish date).
Best Regards,
DB49

Similar Messages

  • Automatic Creation of Production order per month

    Hello Gurus,
    Good Day! Is it possible to schedule creation of production order in background for certain material per month basis?
    Thank you,
    raymond

    Hi Raymond,
    If the suggestion of REM does not work for your requirement, then take the help of your ABAPer use one of the below BAPI's & create a Z prog. for creation of order as required.
    1. Prdn order frm plnd order -> BAPI_PRODORD_CREATE_FROM_PLORD
    2. Prdn order -> BAPI_PRODORD_CREATE
    3. Prdn oder with ref -> BAPI_PRODORD_CREATE_FROM_REF
    Alternatively, create one order & keep it open for the entire year, just do monthly wip calc & at the end of financial year settle the order completely.
    If helpful award points
    Regards,
    Vivek

  • Automatic creation of Production order when PP/DS planned order is CIFed.

    Hi PP Gurus,
    The requirement is when PP/DS Planned order is created and CIFed to ECC R/3, Automatically system should create Production order for that planned order. In this case, is Trigger points will serve the purpose or need to adopt for some other way? I think since APO PP/DS is in sync with ECC R/3, something SAP might have given in this regard?
    Thanks & Regards,
    Abu Arbab

    Dear Abu,
    In SPRO PPDS global parameters and defaults, you can set "create transfer events from conversion indicator".
    After this the planned order is transferred to R/3 only when a conversion indicator is set against planned order.The conversion indicator can be set through RRP3 or RRP4.  You can put mass conversion indicator.
    When such planned order is transferred, it will automatically create production order.
    Regards,
    Nitin Thatte
    Edited by: Nitin Thatte on Apr 20, 2009 4:59 PM

  • Automatic creation of Production order when credit limit lock got released

    It seems that production order will be created only when the sales order is created without credit lock error from the first.
    Once credit lock happened, even if user release the lock, production order will not be created automatically anymore.
    Is there a way to change the setting so that production order will be created automatically after credit unlock?
    don't want to create production order manually every time when credit lock happens

    Hello Manish
    If you have used Standard Requirement 102 in Config T code OVB5 (Maintain Requirements For Transfer Of Requirements) , then it should behave as you wish, that is once you release the credit block,  system should create Purchase Reqs/ Planned/production orders in the background. Check what you have there and/or choose appropriately here. While here, check out OVB8 (Maintain Requirements For Purchase And Assembly Orders)  if anything needs to be done there.
    Also ensure that there are no required fields ( for production order) missing, i.e.,  required entry fields that cannot be supplied automatically for this process.
    For conceptual clarity, check out OSS note 396791 - Credit release of sales orders with third-party items which deals with 3rd party transactions but draws a parallel and mentions 'Production orders' also.

  • Automatic creation of production order form demand

    Dear Gurus,
    In my cycle,
    I want to copy monthly plan from EXCEL sheet through BDC to SAP System.please tell me on which screen it will upload(in md61 or some other).
    After uploading is there any option according to date wise production order should create automatically for each date separate wise.
    Thanks
    Alok

    It will come day wise only if you [split the demand|Re: Automatic splitting of MRP requirements for components] or give the demand in days. Or else while creating the Z program for upload write program in such a way that it will
    1. take the monthly requirement divide the value with no. of working days.
    2. The value got after dividing will be enter evenly for all working days.
    Regards
    Abhijit Gautam

  • Automatic creation of production order

    Hi,
    My clinte wants Auotomatically create production order whenever crate the sales order, or Auotomatically create planened  order whenever crate the sales order,
    please sugest reqire IMG Settings
    thanks in Advance
    Sriram

    Hi sriram,
    Please do the changes in SPRO.
    Material master 40 strategy is required.in MRP view.
    Path - SD > Basic function > Define requied class > (For 40 strategy - 50 is the req. class) tcode - OVZG.
      Changes - Assy type -3, Tick on automatic planning & define order type.
    Please check,Hope this will help you.
    hemant

  • Automatic creation of production order against the sales order.

    Hi Experts,
           My client requirement is he wants the production order to be generated or created automatically as the sales order is created, please suggest weather it is possible or not.
    Regards,
    Naveen.
    Edited by: vaddapalli naveen on Mar 13, 2010 9:03 AM

    Hi,
    It is possible by selecting proper Planning strategies.
    Example you can use the planning strategy Assemble to order with Production order, it is possible.
    please refer the below help link for more details,
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/41/191eb845fd11d188ff0000e8322f96/content.htm
    Thanks,
    R.Loganathan

  • Automatic creation of Production order through Project

    Hi all,
    Could you pls  explain how we can create production orders automatically through a project

    Dear Mr Smith / Rama Shanker
    I have read the reply posted by you and is very usefull . Can you please tell us the Tcode to be used for the mentioned steps in your reply .
    Also kindly help me on the following requirement .
    In our business scenario we have to define seperate budget for Material procurement and seperate budget for Manufacturing expenses .  To achieve this , one posiible option can be that Purchase Requisition (for Procurement) are generated in reference of one WBS element and PR for production order are generated in reference of another WBS element . But as FERT (material with BOM) is assigned to aan activity in one WBS element then during MRP run all requirement  (PR plus Production Order) will be in reference of the same WBS . So how can we distinguish between them .
    Or there may me some other alternate option which we are aware off .
    Kindly help us . We assure to award full points for the suggested solution pl .
    Rgds
    B Mittal

  • Creation of production order with reference to sales order

    dear all guru's,
                       i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
    regards
    ujwal

    Hi,
    For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
    This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
    So if your strategy group is already 40 then you need not change it.
    However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
    Hope this helps.
    Revert if you have any doubt.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Sep 27, 2008 8:50 AM

  • BOM Selection Mandatory while creation of Production Order

    Hello Friends,
    I would like to know that is there any option other than production version which makes it mandatory to have valid BOM must for creation of Production order / coversion of planned order to Production order.
    I have tried with Production version option but it doesnt throw any error in case BOM with inactive status has been selected in it & also Production order gets created & released.
    Before going for user exit / enhancement option, I just wanted to ensure that it is not possible with standard SAP.
    Kindly share your views on the same.
    Your urgent replies will be highly appreciated.
    Regards,
    Tejas

    Hello Tejas,
    I think this is standard SAP Behaviour.
    Try with following exits:
    PPCO0018
    PPCO0012
    Also check out the following link:
    [How To Make BOM Mandatory while creating Production Order;
    Regards,
    Vinod

  • Reg:Bapi for mass creation of production order/confirmation

    Dear Experts,
    I wanted to know with the following BAPI is it possible to create Multiple production orders for different semifinshed Materials along with material availability check and other functions similar to CO01 transaction.
    I knew there are standard transactions for mass confirmation for production orders. But i need a confirmation on this BAPI . As i am planning to go-ahed with ,mass creation of production order creation / Order confirmation in single custom transaction.Need back flush activity even supported.
    BAPI_PRODORD_CREATE to create the orders.
    BAPI_PRODORD_RELEASE to release the orders.
    BAPI_PRODORDCONF_GET_TT_PROP to get the default data for the confirmation.
    BAPI_PRODORDCONF_CREATE_TT to ost the confirmation of production order.
    Along with this BAPI do i need to commit any other BAPI to carry out back flush for components.
    Need your suggestions to take it further.
    Regards,
    Daya.

    Dear SAP Daya
    If the issue has been solved, please close this thread.
    You have already mentioned that the issue has been resolved, thefore, you should not ask for help on another thread before closing this one, as it looks like you are trying to force people to answer your threads.
    Users are always trying to answer as many threads as possible on good will we don't need this kind of "incentive".
    Please read carefully the The SCN Rules of Engagement, especially point 8:
    Be responsive. If an SCN member has answered your question, please mark the answer as "helpful” or “correct”. Mark the discussion as “answered,” so that other members can find the answers more easily
    Also, I checked your old threads and I could observe that there is only one closed. Please review your old threads and close those already solved.
    BR
    Caetano

  • Purchase Requisition on creation of Production Order

    Dear Experts,
    Please clarify the following points
    1 In our Business Scenario on creation of Production Order for a Material, Purchase Requisition is being created on creation of Production Order itself for all Dependent Materials where the items are declared as Non Stock items in BOM  and for the stock items only on MRP run the Purchase Requisitions are created. Is this the standard procedure, or can we customize to create the PRs for all the items on creation of Production Orders??
    2 What exactly the processing indicator in MRP list indicate?
    Thank you,
    Regards,
    Ramakrishna

    For Non Stock items it is understandable, that a PR has to be created with production order creation , as they are not in the stock.
    For Stock items, the creation of PR cannot be linked with Production order creation but can be done with MRP run.
    We can make the system create planned orders or Purchase requisitions or PR in opening period during MRP.
    Processing indicator gives you the scope of PLanning.
    PLanning all the materials within the Planning horizon  --NETPL
    Plaqnning all the materials beyond also--NETCH
    Deleting the current plan and recreating the plan.-regenarative PLannng
    regards
    Ratan

  • Automatic release of production order for perticular work center

    hello,
    any body please help me how to set automatic release of production order when creation for a particular work center. please suggest me.
    Thanks & Regards
    Bhakta

    Dear,
    Use T Code COHVOMRELEASE here select work center as ZPACK then in header menu Program--Schedule in background here define as perodic job and set ferquency as Hr.
    Or Use Transaction SE38 to create  the variants for program PPIO_ENTRY and schedule it through SM36 or use standard variant as SAP&RELEASE.
    Please try and come back.
    Regards,
    R.Brahmankar

  • Automatic creation of Transfer Order when a delivery is created

    Hi all ,
    I wanted to have Automatic creation of Transfer Order when a delivery is created ,
    what are the configuration activities that needs to be carried out .
    Thanks ,
    KSR

    Dear Friends,
    I am also facing the same problem; I want the system to create a transfer order at the time of creation of an outbound delivery.
    I have done customization as under:
    Step 001
    Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries > Maintain Output Determination Procedure
    Step 002
    On the screen, u201CProcedureu201D: Overview, choose the following:
    Procedure     Description
    V10000     Header Output
    Step 003
    On the screen, u201CControl datau201D: Overview, enter the following:
    Usage     Application     Procedure     Step number
    B     V2                     V10000     110
    Counter     Condition Type     Requirement     Description
    01     WMTA                     032                     Automatic TA
    The system does not create a transfer order automatically.
    May I request our learned friends to guide me?

  • Header Material Repeated during creation of production order

    Sir,
    I have defined bom as one component and 3 co product.
    During creation of production order in operation overview i found header material is repeated in components.
    Pl. suggest me where i have made mistake.
    Regards,
    Vivek

    Hi
    Check whether BOM is recursive or not? also check the movement type against the header material.
    Also check in CO03>Goto> Material list
    Regards
    Anupam Sharma
    Edited by: anupam sharma on Jan 30, 2012 12:17 PM

Maybe you are looking for