Automatic creation of Warehouse No. data in the material master

Hi all,
I want the automatic creation of Warehouse No. data in the material master record at the time of the first goods receipt is allowed.
Similar to the way where we can do the same for Storage Location by clicking on Create SLoc. automatically in the plant parameters settings.
can it be done..plz guide.
Regards,
Sandeep

Hi Deepak ,
Such facility is not available for Warehouse .
Regards
Ramesh Ch

Similar Messages

Consumption data in the material master

Dear All,
Can anyone explain me about consumption data in the material master?
1.     How the consumption datau2019s are automatically updated in the material master?
2.     List of movement types, that creates consumption data in the material master
Thanks in advance
Regards,
Krishna samy

Krishna Samy wrote:
Dear All,
>
>
> Can anyone explain me about consumption data in the material master?
>
>
> 1.     How the consumption datau2019s are automatically updated in the material master?
>
> 2.     List of movement types, that creates consumption data in the material master
>
>
> Thanks in advance
>
>
> Regards,
>
> Krishna samy
Hi,
When a PO is created (say for Cost Center(s)), and if the material has a Material Master record, after the goods are received the same goes directly into Consumption account and not in stock account since it is meant for direct consumption by Cost Center(s). (Ex`s. of consumables are Office supplies).
Please go thru this document to understand how automatic postings works: [CLICK HERE|http://help.sap.com/saphelp_46c/helpdata/en/12/1a39516e36d1118b3f0060b03ca329/content.htm]
Reetesh
Edited by: Reetesh on Nov 27, 2011 7:47 PM

Palletization Data in the material master

Hi,
If I defined the palletization data in the warehouse management view of material master as follows:
LE qty: 2
Unit : PC
SU type: IP
the system should separate the transfer orders into several items by LE quantity when put away, for example, If I put away 10 pcs, the system should separate the transfer order into 5 items, each item have 2 pcs, is it right?
Kindly please advise.
Thanks.

http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83fb14afa11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83fb14afa11d182b90000e829fbfe/frameset.htm
Regards,
Ashok

Load Material Data in the Material Master

Hi All,
We have the Material Ledger Active at the Material Level. We are using ECC 6.0 with the highest enhancement pack.
   The requirement is to load the Moving average prices for the Company code currency and Group Currency as a part of
   Material Master Data Migration.
   I am using a the business object BUS1001006's SAVEDATA method (Basic type MATMAS_BAPI03) in a LSMW to achieve
   this.
   This IDOC does not provide me the structure or fields to load the Material Ledger Data. I tried passing the price to the
MBEW-VERPR however the price is not updated.
   One workaround is to use MR21 however that would be a seperate program which we want to avoid.
   Has anyone done this before. Will greatly appreciate any help/suggestions.
   Thank you for your time.
Regards,
Vamsee

Yes, I am loading from the text file.
My Zmaterial is defined as InfoObject with text data language dependent.
Now I want to load this master data through flat file.
I created FlatFile under source System and then created a DataSource. Under Extraction tab I selected the physical location of my flat file with csv separator and all. Then under proposal I saw preview of my data. Later under Fields tab, For Language I selected 0HTLANG
For Materialid I selected Zmaterial (defined by me)
But now there is one more field remaining MAterial Description, across that field what Template InfoObject should I put? Thats my confusion.
After this I can click on Preview and then load that data in PSA thru infopackage. then later into InfoObject.
Please inform.
thnx

Ignificance of the Industry Sector selection in the Material Master

hi all,
We need information on the significance of the Industry Sector selection in the Material Master field. I understand that it can influence field selection and the screen sequence of the material master record. We are particularly interested to know the influence of the industry sector u201CPharmaceutical Industryu201D .
Any inputs would be greatly appreciated.

Hi
Please check follwoing links
[MM01- Industry Sector;
[http://help.sap.com/saphelp_46c/helpdata/en/ff/515b3149d811d182b80000e829fbfe/content.htm]
1. Define Industry Sectors and Industry-Sector-Specific Field Selection (transaction OMS3) -> assign a field reference to field selection
2. Maintain Field Selection for Data Screens (transaction OMS9) -> define a specific field selection for a field selection group (for example, depending on industry sector (the field reference appears on the lower table control).
Like the material type, the industry sector also has a control function. When you create a material master record, the industry sector determines:
Which screens appear and in which order
Which industry-specific fields appear on each screen
The industry sector you assign to a material cannot subsequently be changed. In Customizing, you can define new industry sectors and maintain the field reference for field selection control according to your enterprise-specific requirements.
Most data in the material master record can be maintained directly by the user. But some information is automatically updated by the system. When you enter goods movements, for example, the system updates the stock and consumption data. Statistical information, such as the date of original creation and that of the last change, can be invoked with , with the quick-info text Information on material.
Some data in the material master is used for information purposes only, for example, description, size, and dimensions. Other material data has a controlling function in an application. For example, the MRP type controls the MRP procedure and the price control indicator determines which material valuation procedure is used
Regards
Kailas ugale

ALE/IDOC:The group data for the material CS94163AOOO is locked by ECPUSER

Dear All,
I have extended the idoc for MATMAS and getting -The group data for the material CS94163AOOO is locked by ECPUSER
error on receving ( production ) server.I have written BDC in Z-function module to upload the data for extended segments after calling IDOC_INPUT_MATMAS01 function module.
When the same scenario executed in development server the material is not getting locked and idoc is posted successfully.
Please guide to resolve the error.
Thanks,
Sanjay Deshpande.
Edited by: sanjay_123 on Nov 1, 2009 4:41 PM

Hello,
Can you pls try to use ENQUEUE_E_TABLE or FM specific to lock/unlock MARA table during Idoc creation.
and put some WAIT statement before creation.
CALL FUNCTION 'ENQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '2'
*_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Then write code for creation of MARA
Unlcok now like this
CALL FUNCTION 'DEQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '3'
_SYNCHRON = ' '
_COLLECT = ' '
~Pramod
Edited by: PKUPADHYAY on Nov 1, 2009 5:40 PM

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to Update the Basic Data text in Material Master.

Hi Abapers,
I have more than 5000 materials for update basic Data text inside Material Master.
how to update basic data text using abap programe? is there any bapi or normal program?.
anybody give me sample of this.
Thanks
S.Muthu.
IT Dept.

Hi
You can do by using the FM SAVE_TEXT.
Just populate text into table i_tline.
Local data declaration
DATA: l_wa_thead TYPE thead, " Header
        l_wa_tline TYPE tline. " Work area for tline
Populate header
l_wa_thead-tdobject = c_obj_material.
l_wa_thead-tdname   = wa_data-matnr.
l_wa_thead-tdid     = c_id_best.
l_wa_thead-tdspras = sy-langu.
l_wa_thead-tdluser = sy-uname.
l_wa_thead-tdfdate = sy-datum.
l_wa_thead-tdtxtlines = '1'.
IF i_tline[] IS NOT INITIAL.
   l_wa_tline-tdformat = c_slash.
   APPEND l_wa_tline TO i_tline.
ENDIF.
Text shd start from next line
l_wa_tline-tdformat = c_slash.
CONCATENATE c_text wa_data-text
INTO l_wa_tline-tdline SEPARATED BY space.
Append the new text to the int table
APPEND l_wa_tline TO i_tline and l_wa_thead
C* Local data declaration
DATA: l_wa_thead TYPE thead, " Header
        l_wa_tline TYPE tline. " Work area for tline
Populate header
l_wa_thead-tdobject = c_obj_material.
l_wa_thead-tdname   = wa_data-matnr.
l_wa_thead-tdid     = c_id_best.
l_wa_thead-tdspras = sy-langu.
l_wa_thead-tdluser = sy-uname.
l_wa_thead-tdfdate = sy-datum.
l_wa_thead-tdtxtlines = '1'.
IF i_tline[] IS NOT INITIAL.
   l_wa_tline-tdformat = c_slash.
   APPEND l_wa_tline TO i_tline.
ENDIF.
Text shd start from next line
l_wa_tline-tdformat = c_slash.
CONCATENATE c_text wa_data-text
INTO l_wa_tline-tdline SEPARATED BY space.
Append the new text to the int table
APPEND l_wa_tline TO i_tline.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
      client          = sy-mandt
      header          = l_wa_thead
      savemode_direct = c_check
    TABLES
      lines           = i_tline
    EXCEPTIONS
      id              = 1
      language        = 2
      name            = 3
      object          = 4
      OTHERS          = 5.
IF sy-subrc = 0.
    COMMIT WORK.
endif.

Units from the additonal data tab of the material master

HI Gurus,
can anybody please tell me how we can pull the units from the units of measure tab of the additonal data data tab of the material master?
Thanks
Anusha

Hello,
Are you asking about the Table where you can see the entry for UOM in Material Master?
If this is your question then answer is It is MARA1 & MARM where you can see the UOM.
regards,
Prashant Rathore.

Error in uploading the material master data

HI friends,
I have trasferred the material master data through idocs from one server to another server(with in SAP only).
Outbound side the status of idoc is 3 which is OK.But inbound side ,the status is 51 and the error is 'Function module not allowed IDOC_INPUT_MATMAS01'.I debugged the function module in which the control records , data records are getting transferred correctly and also the segments data is also fine.But , i am not able to rectify the error.
Can anybody give the solut

Hi mahesh,
check the proces code may be having the FM module 'IDOC_INPUT_MATMAS01'. change with some other FM for processing the IDOC. you need check with different ways what is the problem. better dont stick on one thought.
~linganna

SAP standards for retriving the Material Master Data

Can someone provide me list of all SAP standards for retriving the Material Master Data with respect to views.
Standard Reports
Function Modules
RFC's
BAPI's.
T.codes
Sample code's
useful answers will surely be awarded.
Regards
Vinayak

Hi,
These are the standard BAPI's for Material master.
BAPI_MATERIAL_DELETE Flag Material for Deletion
BAPI_MATERIAL_DISPLAY Display Material
BAPI_MATERIAL_EDIT Change Material
BAPI_RETAILMATERIAL_CREATE Create Material
BAPI_RETAILMATERIAL_DELETE Discontinue Material
BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_EXISTENCECHECK Check Existence of Material
BAPI_MATERIAL_GETBATCHCERT Create Quality Certificate for Batch in Portable Document Format (PDF)
BAPI_MATERIAL_GETBATCHES Create Batch List for a Material
BAPI_MATERIAL_GETCHARMERCHHIER Supply Characteristics of Retail Material for Material Group Hierarchy
BAPI_MATERIAL_GETINTNUMBER Assign New Internal Numbers for a Material Type
BAPI_MATERIAL_GETINTNUMBERRET Assign New Internal Numbers for a Material Type for Retail Materials
BAPI_MATERIAL_GETLIST Supply List of Materials for Search Criteria Transferred
Thanks.,

Label Data view in the material master

Hi all,
I read this SAP help portal that said "The Label Data view in the material master allows you to display or edit label data that is specific to the material. "..
may I know where I can find this view in the material master?
Thanks
Karen

Dear Karen,
This "Label Data" is one View in Material Master.
While creating the Material using T.Code MM01, when you are on the Selection screen of Various views, it is Last Option.
i.e. Lable Data
If this view is not there while creating the Material. then it is MM Configuration.
That view is assinged to Material Type.
See in Material Master, Industry Sector and Material Types controls these Views. So with the help of MM Consultnat you
have to get that View Configured to your Material Type.
If you find my answer satisfactory, please grant me the points.
Regards,
Amol Joshi

USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

Hi,
Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
Regards,

Hi,
There is another user exit for updating material document data Upon posting is MB_CF001
I hope this will fullfill you.
Prem

Revoke the material master data's updated in production

Hi Experts,
I have updated the product hierarchy field for the list of materials using BAPI_MATERIAL_SAVEDATA.
I have forget to set the SALES_VIEW flag in BAPIMATHEAD table, instead it created all the views for the material. Is there any way to revoke the material master data.
Thanks & Regards,
Anand

ALL_CAPITAL should resolve your problem. Check this also:
RSDMD 194: 0MATERIAL Datarecord is invalid
/thread/307925 [original link is broken]
Absolutley Stuck...can't load data as characteristic
Thanks..
Shambhu

Units of Measures found in the material master.

Hi,
What is significance of different Units of Measures found in the material master.
Ajay

Hi,
Order unit
Unit of measure in which a material is ordered. It is the default unit in purchasing functions.
Order price unit
Unit in which the vendor invoices you. The order price unit is defined in the purchase order or in the purchasing info record. If you have defined an order price unit in the PO, the goods receipt will be recorded in both the order unit and the order price unit.
Sales unit
Unit of measure in which a material is sold. It automatically appears as the default in a sales order and can be changed there.
Unit of issue
Unit of measure in which a material is issued from the warehouse/stores. You can use this unit of measure in conjunction with goods issues and physical inventory activities.
Any quantities that you specify in a unit of measure other than the base unit are automatically converted into the base unit by the system. To make this possible, you must enter the ratio for conversions between alternative units and the base unit (the conversion factor) in the material master record. You can enter this information when specifying the alternative unit of measure
Regards,
Santosh

Automatic creation of Warehouse No. data in the material master

Similar Messages

Maybe you are looking for