Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

Similar Messages

  • Automatic goods issue for outbound delivery without picking/packing

    Hi,
    I have the following flow: sales order -> outbound delivery -> goods issue.
    I would like to to be able to post an automatic goods issue on my delivery.
    Could someone please let me me know how to perform the customizing for this or give me the reference of the appropriate post which answers this.
    Thanks,

    Hi,
    Use t-code VL23
    select  varient SAP & STANDARD >>> Click on START IMMEDIATELY
    or else
    click on schedule >>> click on schedule periodically >>> select your option as Minute and maintain value 1 or ( 1 to 60 )
    it means sytem will run this program after every one minute
    Also You can able to create your own varients and speciefy criteris like form which sales orz, which delivery types etc.
    Kapil

  • Automatic Goods Issue after Outbound delivery and shipment.

    Hi,
    I am working on LES part.
    Could you please explain me how to do Automatic post goods issue for shipments.
    (in our scenario where after outbound delivery, picking, packing shipment takes place.)
    Can we use VL23 for automatic goods issue for shipments? (or igoods issue is only for outbound deliveries?)
    If so what is the selection criteria for background scheduling-Variants?
    Please explain me in detail
    Thanks a lot.

    Anil,
    Not sure if I understand your question, Goods Issue is posted for the delivery and not the shipment.  In a shipment you can update the actual values for Planned, Check-In, Load Start, Load End etc values.  A shipment can have single/multiple deliveries, you can use VL23 for scheduling a background job to do the PGI automatically, use either the standard variants or define your own variant and use that variant to schedule the job.
    hith
    Sunil Achyut

  • Goods issue for outbound delivery

    Any example on how to simulate vl06g (goods issue for otubound delivery)?
    I'm trying it with BAPI_GOODSMVT_CREATE...
    Thnks.

    Hi Lopez,
    Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
    Regards,
    Sravanthi

  • Automatic Goods Issue in Outbound delivery scenario with resp to Shipment

    Hi,
    Could you please explain me, how  Automatic Goods Issue happens in Outbound delivery scenario process and in shipment process.
    Is there any transaction for this?
    Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
    How  we schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
    Could you please explain me in detail?
    Thanks A lot.

    Hi Anil,
    VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
    Thanks,
    Sree.Manam

  • Automatic Goods Issue in Outbound delivery scenario with Shipment

    Hi,
    Could you please explain me how to Automatic Goods Issue happens in Outbound delivery scenario and in shipment process.
    Is there any transaction for this?
    Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
    How schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
    Could you please explain me in detail?
    Thanks A lot.

    Hi Anil,
    VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
    Thanks,
    Sree.Manam

  • Post Goods Issue for Outbound delivery return

    Hi, I'm trying to Post a Goods Issue for a returned outbound delivery but  I cannot find a function module to do this, I tried using SD_DELIVERY_UPDATE_PICKING but its creating the material against the outbound delivery with status archived, which means it wasn't created.
    I also tried using the MB_CREATE_GOODS_MOVEMENT, but this one is creating the material document but not updating the status and the document flow of the delivery.
    Thanks,
    Pablo

    Hi Lopez,
    Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
    Regards,
    Sravanthi

  • STO AUTOMATIC GOODS ISSUE TO OUTBOUND DELIVERY

    Hi,
    I'm trying to automate the posting of a GI to a outbound delivery and can't find where in config to make the relevant setting. We are using the two step procedure and have automated the creating of the delivery but still require the GI to be posted.
    Thank you for you assistance!!
    Regards
    Craig

    create a variant for VL10B and the n schedule a job for abap RVV50R10C  using this variant.
    Sorry, that was the wrong info:
    Correct way is
    create varaint for VL06O and then schedule job for abap WS_MONITOR_OUTB_DEL_GDSI
    Edited by: Jürgen L. on Jul 8, 2008 1:29 PM

  • Post goods issue for outbound delivery in previous month

    Hi experts,
    Pls help. Many thx.
    Due to roll out, some stock need to be issued in previous month. It works fine except some deliveries. Those deliveries have been cancelled goods issue due to wrong posting date.
    For e.g. the posting date in delivery should be April 1. Due to oversight, the date is entered as May 27. In VL09, the reverse date should be in May. Otherwise, the system disallows further.
    Now, the problem comes up. When doing those deliveries again (even create new deliveries), the error message pops up "Deficit of SL Unrestr. prev. 350 KG : XX material XX plant XX storage location
    Message no. M7021
    Diagnosis
    Shortfall below the specified stock level or quantity amounting to 350 KG.
    System Response
    If the message is an error message (E), the above is not allowed.
    If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
    Procedure
    In the case of a warning message, check the quantity entered.
    In the case of an error message, change the quantity or terminate processing."

    Hi Lakshmipathy,
    I tried the same as you said but its throwing the error below:
    GI for delivery 80014996 cannot be canceled for the following reasons:
    Cancellation date 30.04.2009 is before the goods issue date 28.05.2009.
    I don't have the any issues but i tried whether its working or not.
    Kindly suggest...
    Regards,
    SK

  • SD: Need to cancel Goods Issue for Outbound delivery cancellation via VL09

    Hello.
    User have have canceled the GI for OBD via VL09. But the date of cancelation is 09.11.2010 though it should be 29.10.2010 (as it was in the initial document).
    Is there any possibility to cancel this cancellation?
    Best regards.

    hi
    once PGR happend basing on the document date we cannot reverse on the same.  functionally it is not possible because the entry has been registered/credited wirh COGS.
    hope this helps
    regards
    balajia
    Edited by: balaji timmampalli achari on Nov 14, 2010 2:43 AM

  • Different movement types for goods issue via outbound delivery

    Hi gurus,
    How can I use different movement types for goods issue via outbound delivery?
    Thanks&Best Regards,
    Burcu

    To use different schedule lines, we need different item types and different document types. Is that right?
    Is there a user exit in outbound delivery to post goods issue?
    Thanks...

  • Goods Issue against outbound delivery from blocked stock

    Dear All
    I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
    Please let me know any solution for this.
    Thanks and Regards
    Satish Kumar

    Hi
    Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
    http://scn.sap.com/thread/1541911
    Thank$

  • How do we do Automatic freight preperation for outbound delivery in SAP

    How do we do Automatic freight preperation for outbound delivery in SAP

    'Automatic freight preperation'? New concept that SAP came out with? Or is it Freight Calculation? If it is the latter, activate Shipment and Transportation and you have it in a jiffy. You need to work on VT01N, possibly VI01. Plenty of work in SPRO, too
    Regards
    Ramana ND

  • Goods Receive for Outbound Delivery Without Reference using MIGO

    Dear Colleague ...
    We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
    (1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
    (2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
    (3) The first 2 (two) cases work just find with MIGO.  We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
    (4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5".  We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
    (5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
    Appreciate for any thoughts or input on the above.  Many thanks,
    Alvon Sibarani

    use transaction mb0a it will work for the scenario.

  • Posting of Goods Issue for a Delivery (Different movement types)

    Hello SD Experts,
    We have this process wherein we use Deliveries w/o reference. There's a customization in place for this process, the movement type is determined through the item category of the material.
    Given this scenario, my question is if it is possible to process the goods issue of a delivery with multiple item which require different movement types (diffrent items and item categories thus it have different movement types)?
    Thank you for your kind consideration.

    Hello,
    Yes, you can.
    As you know LO is std delv doc for delv w/o reference.
    And I cat determination for that LO delv doc are
    Delv Type  __ I Cat Group  __  Usage __ High I Cat  __  Def I Cat  __ Man I Cat __ Man I Cat
    LO _____________________TEXT ______________ DLTX          
    LO ________DIEN____________________________ DLX _______DLX     
    LO ________LEER___________________________ DLN          
    LO ________LEER________________DLNG_______DLNZ          
    LO ________LEIS_____________________________DLX_______DLX     
    LO________ NLAG____________________________ DLX          
    LO________NORM____________________________DLN          
    LO________NORM________CHSP_______________DLN          
    LO________NORM________CHSP____KLN________KLN          
    LO________NORM________CHSP____TANN______TANN          
    LO________NORM________PACK_______________DLN________DLX________DLP
    LO________VERP____________________________DLN          
    LO________VERP_________PACK_______________HUPM______DLN     
    LO ________VOLL____________________________ DLNG          
    LO ________ WERT____________________________ DLW          
    Corresponding maintain movement type in Schedule line cat (Tcode VOV6) & determination that in TCode VOV5.
    If you want diff movement type then create your own 'Z' Sch line cat with you desired Movement type (Tcode VOV6) and determine the Sch line Cat accordingly in TCoDe VOV5.
    Thanks & Regards
    JP

Maybe you are looking for