Automatic PO output Determination do not get trigger for SRM Classic impl

Hello,
We have implemented SRM 7.0 classic scenarios. We have set up system in such a way that whatever user put in Preferred Supplier at Shopping cart while saving the shopping cart we convert it to Supplier partner type and once approved create PO in ERP system.
Things are working perfectly fine but the problem we are facing is Output determination. We have Vendor email address maintained in vendor master and placed Condition type in MN04 for vendor with Immediate output of email.
But whenever PO is being created that automatic output determination is not being triggered...
Could anyone please help what thing i am missing.
Thanks
Ritesh

Hi,
Please check the created condition record in MN06 in all aspects i.e. partner fucntion name, Medium (5), Language, etc.
I believe  you have created the condition record with the combination of vendor/pur.org/document type.
Also check the Actual processing tab and general data is there any check box against Locked field.
Thanks
Rajesh K

Similar Messages

  • Output type is not getting triggered for ship to party in shippment output

    Hi,
    we have maintained output determination procedure for shipments. It was working fine.
    We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for  the output type.
    Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
    Please advise and let me know if you need more details....thanks in advance.
    Thanks,
    SS

    Hi Noel,
    Thanks for your time and reply.
    We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type  ZABC already placed in Output determination procedure.
    We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that  is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
    I have checked condition records, output determination procedure. Please advise and let me know you need more details.
    Thanks,
    SS

  • Event Handler is not getting trigger for Freely Programmed search help

    Hi All,
       I am having a component comp1 defined for value help with one event. In component comp2 i want to call the comp1 but the event handler which i have created is not getting triggered. Any reasons for it.
    Thanks
    Raghavendra

    Hi Kumar,
    Please check these forum threads.
    Re: Help required on Freely Programmed Input help
    Re: Custom search help

  • Output determination does not happen during Sales Document creation

    Hello All,
    I am facing an issue where the automatic output determination does not happen when the Sales Order is created. Let me explain a bit on the background.
    Output type ZDL2 has been defined as a special function (TNAPR-NACHA = 8) attached to a custom program and Form routine to create Outbound delivery after successful posting of the sales order.
    Condition records are maintained to trigger this output for the Key Combination of Sales Org/Distrib Channel/Division/Route. Access sequence has also been correctly maintained for the above fields.
    When the Sales order is saved, the output is supposed to be triggered but out of several sales orders created, it triggered for just one document. We have no clues on what could be the issue.
    One question here is, can we have the access sequence maintained for the fields from both header and item level (ie KOMKBV1 and KOMPBV1). Please be reminded that, in our case, the field ROUTE comes from the field catalog KOMPBV1.
    Another point which we noticed is that, the Function Module COMMUNICATION_AREA_KOMPBV1 which is supposed to fill the Item data Communication structure for output determination was never called.
    Has anyone came across such situations. Comments or suggestions are really appreciated.
    Kind Regards
    Sabu Kuriakose

    Sabu Kuriakose,
    Since you are using ROUTE as one parameter for the condition table, and it is at the item level.
    the output is triggered at the header level.
    So a sales order can contain multiple items with different routes. so at header level how will u identify the route ?
    the fields might be available for creatign the condition table but the problem is the fields should get the value during order processing.
    in the analsysis screen you will know that the field is getting the value of the ROUTE  or not ?
    also for creating a delivery you need a shipping point. same as above you can hae multiple items with different shipping points. how will u consider that scenario.
    If you can explain that, then that will be helpful to answer your problem.

  • Start Varient is not getting trigger in Meta Chain.

    Hi All,
    I have a ProcessChain with in it there are many Meta Chains.
    Problem is, there are few Meta Chains Start Varient is not getting trigger automatically, it is getting red and continuing further process,
    when i check its logs also it is not giving any logs
    Please help me in this.
    Regards,
    Kiran

    Hi V,
    when i dubble click, i am getting bellow message Log
    20.07.2009     12:24:22     Job started     S     00     516
    20.07.2009     12:24:22     Step 001 started (program RSPROCESS, variant &0000000365507, user ID BIWREMOTE)
    20.07.2009     12:24:22     No new deltas in DataStore object 0FIGL_O02 for update     S     RSM1     96
    20.07.2009     12:24:23     Chain SFI_SFIGL_C02 was removed from scheduling     S     RSPC     26
    20.07.2009     12:24:23     Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 12242300     S     RSM     703
    20.07.2009     12:24:23     Program RSPROCESS successfully scheduled as job BI_PROCESS_ODSACTIVAT with ID 12242300     S     RSM     703
    20.07.2009     12:24:23     Program RSPROCESS successfully scheduled as job BI_PROCESS_ODSPROCESS with ID 12242300     S     RSM     703
    20.07.2009     12:24:23     Program RSPROCESS successfully scheduled as job BI_PROCESS_ROLLUP with ID 12242300     S     RSM     703
    20.07.2009     12:24:23     Chain SFI_SFIGL_C02 Was Activated And Scheduled     S     RSPC     25
    20.07.2009     12:24:23     Cannot activate job BI_PROCESS_TRIGGER (return code 8)     I     RSM     702
    20.07.2009     12:24:23     Process did not report an instance -> no log     E     RSPC     57
    20.07.2009     12:24:23     Job cancelled after system exception ERROR_MESSAGE     A     00     564
    But when i go Right Click and Display Variant  and check for 1 week ego, it wont show any logs, it says "No Logs were found"
    Please let me know your inputs
    Regards,
    Kiran

  • RBA GATP check is not getting invoked for Sales Order

    Hi Everyone,
    RBA GATP check is not getting invoked for Sales order.
    I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
    However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
    I would expect that system would propose the same material in an alternate location where we have stock through RBA.
    Request you to share ideas on this.
    Regards,
    Avijit Dutta

    Hi Avijit,
    You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
    What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
    Thanks,
    Bala.

  • Processing log not getting updated for send immediatly

    Hi,
    I have a custom output type and a Custom function module for issueing the output for delivery, my prob is that it processing log is getting updated for the send in batch and other options but it is not getting updated for the SEND IMMEDIATLY, I am using the same FM for the Output issue I am checking if they have selected output type as 4 if yes, I am calling a FM in perform by saying
    PERFORM xxxxxxxx ON COMMIT
    and in the perform I am calling a FM
    CALL FUNCTION  xxxxxxxxx in BACKGROUND TASK  AS A SEPARATE TASK,
    the functioanlity of issueing the output is working but the Processing log is not getting updated.
    What might be the problem ? it is getting updated for  Send in batch but not for except 4.

    I am updating Log using this form
    at every step I am collecting the messages and passing them to this form.
    FORM update_nast_log  USING   p_msgid
                                  p_msgnr
                                  p_msgty
                                  p_msgv1
                                  p_msgv2
                                  p_msgv3
                                  p_msgv4.
    * Local data declaration
      DATA: lv_msgid LIKE sy-msgid,
            lv_msgnr LIKE sy-msgno,
            lv_msgty LIKE sy-msgty,
            lv_msgv1 LIKE sy-msgv1,
            lv_msgv2 LIKE sy-msgv2,
            lv_msgv3 LIKE sy-msgv3,
            lv_msgv4 LIKE sy-msgv4.
    * clear all the local variables
      CLEAR:lv_msgid,
            lv_msgnr,
            lv_msgty,
            lv_msgv1,
            lv_msgv2,
            lv_msgv3,
            lv_msgv4.
    * move message ID,number,msg type and the messsages
    *     to local variables
      MOVE: p_msgid TO lv_msgid,
            p_msgnr TO lv_msgnr,
            p_msgty TO lv_msgty,
            p_msgv1 TO lv_msgv1,
            p_msgv2 TO lv_msgv2,
            p_msgv3 TO lv_msgv3,
            p_msgv4 TO lv_msgv4.
    * Update nast table using nast protocol update
      CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
        EXPORTING
          msg_arbgb = lv_msgid
          msg_nr    = lv_msgnr
          msg_ty    = lv_msgty
          msg_v1    = lv_msgv1
          msg_v2    = lv_msgv2
          msg_v3    = lv_msgv3
          msg_v4    = lv_msgv4.
    ENDFORM.                    " UPDATE_NAST_LOG

  • We are not getting email for any of the two new profiles in Production environment

    We are not getting email for any of the two new profiles.
    The new rules for sending e-mail work when using the initial profile.
    Only works for F9 and choose manually the profile is being sent.
    But siebel writes the log of both the \ BIN \ sent as if it had sent.
    operation:
    Standards (Policies) were created in the Activities (S_EVT_ACT) and Contacts table (S_CONTACT). When Standards (Policies) are reached trigger actions (Actions). These actions are linked to sending emails.

    The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent. 
    -Are you using Static- or Dynamic Port?
    Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
    instances in the Group Hub.
    If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
    Morten la Cour

  • NOT Getting Values for LOCATION...on MultiProvider REPORT

    HI All,
    I have a MultiProvider on 4 cubes.All these 4 cubes having object LOCATION. I can see data in all cubes for LOCATION. I am running a report on this MultiProvider.
    Problem:
    I am not getting Values for LOCATION. Why?
    What I did:
    I checked all location objects of all 4 cubes @ MultiProvider level .
    I didn't use any Infoprovider in Qry designer sections.
    Please suggest. What is the reason how to solve..
    THanks & Regards.
    Sri.
    Edited by: siri26 k on Dec 5, 2008 10:41 AM
    Edited by: siri26 k on Dec 5, 2008 10:41 AM

    hello,
    in the identification tab of the MP,make sure you have checked all four checkboxes across the 4 infoproviders.
    then in Listcube T-Code, select your MP,display the records based on selection inputs and see if location is populated.
    If the data is not coming in listcube, then it will not come in the Query too.
    Reg,
    Dhanya

  • Values not getting displayed for members which doesnt have parents

    Hi
    I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
    The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
    Is it a bug , we were able to do it in Express ..
    Can anybody help us in doing this.??
    Thnx in Advance......

    Hi,
    This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
    Hope this helps
    BI Beans PM Team
    Oracle

  • Header Vendor text is not getting displayed for PO in BBP_PD transaction.

    Hi Experts,
    We are upgrading   SRM 3.0 to SRM 7.0 .In the upgraded  sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs  the Header text field is populated correctly.
    Inputs on this will be very helpful.
    Regards,
    Ravi.K

    Ravi,
    Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
    SG

  • PF not getting deducted for the mid month joinees.

    Hi,
    The problem is coming in the PF deduction of the employees who have joined in the mid of the month.
    For ex if an employee's basic salary is 7000 and the emp joined in the mid of the month , the system is taking PF from RS 3500 , where PF deduction is not applicable. Now the result is PF is not getting deducted for that month which should not happen.
    So kindly guide me how to apply a check in the system so that it deducts the PF of those employees who are joining in the mid of the month and their basic salary is above Rs6500.

    check
    INPA4
    INPA3
    INPA2
    INPA1
    tables  V_INPA1  check the configuration once
    if u dont want f

  • Not getting data for 1 field in ODS

    Hi BW Experts,
    I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
    I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
    Thanks,
    Siva.

    Thanks for the Update
    1. What is your Service Pack Level?
      Service Pack is 0016
    2. Are you able to see the data in PSA?
       Yes I can see the data in PSA
    3. After load, are you able to see the value in New table?
       Yes i can able to see the data in New data table
    4. Anywhere, are you doing the SORTING of Data Package?
       No I have not sorted the data Package.I have not written any coding on this
    I have not written any coding in transformation also.
    Thanks,
    Siva.

  • Proposals are not getting generated for BOM items in MD50

    Hi Gurus,
    I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
    For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
    MRP type is PD in both materials.
    When i run a MRP thru' MD50 after getting customer order.
    it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
    Please let me know the solution.
    Thanx in advance
    Regards,
    Nagraj Vasmate

    try to use strategy 20

  • SQLloder scripts not getting generated for CLOBs

    I am trying to migrate MYSQL 3.23 database into Oracle 8.1.7 and after creating the Oracle model and after converting the MYSQL text datatype into CLOB of the Oracle model the SQLloader scripts is not getting generated for CLOB datatypes. I mean the scripts are getting created but there is no change in the script for CLOB datatype.
    The script generates the following for the table containing CLOB datatypes:
    mysqldump -h <HOST> -u <USERNAME> -p<PASSWORD> -T <DESTINATION_PATH> fields-terminated-by="<ec>" lines-terminated-by="<er>" test av_wbt_course
    Please let me know how to load data when the datatype is of CLOB ?

    I was able to resolve this issue by using OWM Oracle Migration instead of using offline method by sqlloader scripts.

Maybe you are looking for