Automatic Transport Mechanism to four systems in same landscape

Hi,
We have come across a requirement where we need to transport a request to four systems instead of traditional three.
The systems involved are - DEV (Development), QAS (Quality), PRD (Production) and TRG Training).
Currently the transport route is setup for three systems and we need to add the fourth one - Training system. The solution we are looking for is once the request is imported in Production it should be imported automatically in Training system, without any manual intervention.
The version being used in ERP 5.0.
Any input in this reagrd is much appreciated.
Regards,
Rajeev

Hi,
You can configure the transport route accordingly
Then Click on the system where you want to schedule the auto import job (Training System ). Once you are in the import queue of that system (Tranining ), click on import all request (Big truck). After choose option - at start time and give a period say from today 7 AM and then choose the period option like (every 15 mins) and save this. It will release a periodic job running every 15 mins in your system with the name TMS_00000000XXTMS_TP_IMPORT.

Similar Messages

  • Automatic transport in Two QUA systems

    Hi to all;
    I have one development system and two QUAs systems. If I release the order go to two QUAS systems.
    I need for example if import manually the order in the first QUAS system, that automatic the order will be import in the second QUAS system.
    It´s possible? any help or idea?
    Best reagards

    So in that case what you can do is change you STMS setting a little bit. So you setting would look something like this :
    DEV -> QA1 -> PRD
               -> QA2
    So DEV to QA1 and then once transport is imported into QA1 then it will be added to the queue of QA2 and PRD.
    In this way untill and unless the transport is not imported to QA1 it will not be imported automatically to QA2 and for PRD you can always use whatever your process is.
    Hope this helps.
    Thanks,
    Naveed

  • Systems in same transport domain, but PRD import queue is empty

    Hi all!
    I have previously set up ERP 2005 development and QAS system, and there has been some development and transporting occuring between these two systems. Now I have installed the production system and added it to the transport landscape in STMS. The three system are in the same transport domain and the same transport group. In STMS I have created the Delivery route to the PRD system.
    When I check the import queue for the production system, only transports created AFTER the installation of the production system appear in the import queue. Transports created and released from DEV to QAS before the production system was available is not displayed in the queue.I know that I can add single requests to the import queue easily, but that required a lot of manual work and making sure that the transports are added to the queue in the correct sequence.
    How can I get all the transports to appear in the PRD system import queue? In AL11 in PRD, I am able to access the TRANS_DIR and I see all the transport requests in the directory.
    Regards,
    Thomas

    Hi Thomas,
    "Only transports created AFTER the installation of the production system appear in the import queue." - <b>This is expected</b>
    From table E070, you can get a list of all transport imported into QAS system. Sort that list according to the date imported, and save the transport requests into a text file.
    Run this below script from production by logging in as <sid>adm.
    Provide the transport text file as an input to the script. It will add the transports to queue automatically one by one.
    @echo on
    set SID=<Prd SID>
    set CL=<Client>
    set filename=<drive>:\usr\sap\trans\scripts\transports.txt
    FOR /F "tokens=1,2* delims=K" %%i in (%filename%) do (
    tp addtobuffer %%iK%%j %SID% client%CL% pf=<drive>:\usr\sap\trans\bin\TP_DOMAIN_%%i.PFL >> )
    Before running the script, take a backup of the production buffer at the OS level, incase u need to restore it.
    Cheers,
    Fahad

  • Transports - automatic transports

    Hi Friends,
    For automatic import of transports to QA , i have schedule the below job
    TMS_00000001IMP.ALL ,
    This job is finishing with the below  error
    Transport control program tp ended with error code 0212
    Diagnosis
    An error occurred when executing a tp command.
      Command: IMPORT ALL  pf=/usr/sap/trans/<SID>/bin/TP_DOMAIN
      Return code: 0212
      Error text: could not access file as supposed (see dev_tp or S
      Request: ALL
    System Response
    The function terminates.
    Procedure
    Correct the error and execute the command again if necessary
    I have checked the permissions and corrected the same. But still i am getting the same error. Hence the automatic transports to QA is not working.
    Please some one help me to correct the same.
    Thanks
    anup

    Hi,
    What the SAP system's TP system Log is telling ?
    (STMS->Overview->Imports-->click on Goto -> TP System log)
    Operating System ?
    Regards,
    Bhavik G. Shroff

  • DEV- QAS : Obligatory transport target for business system not found

    Hi guys!
    I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
    I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
    Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
    Here were my steps:
    Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
    1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
    2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
    3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
    4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
    If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
    If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
    But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
    Am I missing something here?
    Thanks!
    Ricardo Sancio Lóra
    Brazil

    Hi,
    If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
    Regards,
    Sarvesh

  • Automatic transport with ChaRM

    Hi!
    We transport currently all transports with u201EIMPORT ALLu201Cmethod and are thinking about the implementation of ChaRM.
    This method (u201CIMPORT ALLu201D) allows us to transport the transports at 10 and 14 ou2019clock automatically from DEV into QAS system
    As we know ChaRM works with SINLGE IMPORT method (CTC=1).
    Questions
    1) Do we have any possibilities for the automatic transport in ChaRM?
    If Yes, how does it work?
    2) Do we have any possibilities for locking of objects and mechanisms to avoid "outrun of transportsu201D?
    Developer 1 works with objects A, B, C, changes the object B and transports them into QAS system.
    Developer 2 works with objects B, G, H, transports the object B into QAS system.
    Now he has the other version of object B, because the object B was changed by developer A.
    Does ChaRM offer some mechanisms to avoid  u201Coutrun of transportsu201D?
    Any helpful information will be very appreciated and awarded with points.
    Thank you very much!

    Hi!
    Thank you very much again.
    The problem is we would like to use non-ChaRM and ChaRM transports simultaneously in same DEV client (e.g. 100). The same applies for QAS system (e.g. client 200).
    We would like to integrate other transport routes into ChaRM.
    Do you think we have possibility to integrate this.
    Please have a look into our system landscape [SAP system landscape |http://www.file-upload.net/view-1086963/SDN_TMS_Ist_Soll.jpg.html].
    Please help to clarify....
    I awarded you point...

  • Automatic transports scheduling in ECC

    Dear Friends,
    We are planning to automate the transports in our Quality system. We have concern for the following, please can u kindly help us with the same.
    If we automate the transports in SAP, will the old released transports to QA but not transported to QA will they automatically be transported with the new queue. If what is the procedure to avoid the same.
    Also what are the other precautions we need to consider when we schedule the automatic transports.
    Thanks
    ram

    Hi,
    Thanks for your kind reply. The buffer for the QA system is set to /usr/sap/trans/SID/buffer/SID_of_QA(where transport queue is defined)
    So if I move the SID_of_QA from the buffer, automatically all the queue in the transports will disappear.
    Once we schedule the automatic transports then only the new transports released in the queue will be transported. Please correct me if I am wrong.
    Thanks.

  • Deactivating automatic transports?

    Hello experts,
    I am trying to disable the automatic prompt for a transport when going through the hiring process via PA40.  I know you can check a few fields in table T77S0 which works. 
    Somehow our production environment doesn't prompt us with a transport request for the hiring process but also doesnu2019t have these fields checked in the T77S0 table.  We donu2019t want to maintain this table if there is another way to disable the prompt for a transport request.
    Iu2019m sorry if this question is too basic but I havenu2019t been able to solve this query on my own.
    Regards,
    Kevin

    Hi,
    You can disable transports via SCC4 transaction by selecting "No automatic transport ".
    However, this would affect the transport mechanism in the whole system.
    On the other hand, the switches in T77S0 only affects transport requests in Personnel Management module.
    Regards,
    Dilek

  • Factory Calendar (Automatic Transport Request)

    I would like to make changes to the factory calendar automatically request a transport.
    Does anyone know if this is possible?
    In transaction SCC4 Automatic recording of changes is set.
    In IMG Activity, object SCAL is set to 2 Automatic transport
    When changes to factory calendars are made, it only warns that customizing changes are not automatically recorded.

    Factory calendar can be changed in Development. This wont create any transport request number. If u need the same changes in other systems, this needs to be manually changed in those systems. There will not be any transport rquest generated as such.
    Pl. award appropriate points if useful.

  • Problem during import of 121 transport requests to productive system

    Hello
    We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in  TRJOB  as well).
    In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
    In SM37 I can see it as  job "RDDGEN0L" with  repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting  that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
    For fist two indexes I know they are not present  as objects "LIMU""INDX" in any transport request beeing imported.
    Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
    Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
    PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
    There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
    Does anyone knows workaroun to solve production

    are you importing these transport requests simultaneously into production?
    I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
    Rohit

  • Transport target for business system not found in System Landscape Director

    Folks,
    We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
    We are getting following error when we try to import an interfaces in to new PID system:
    Import failed because of business system transfer object
    Communication component XID_FileSystem: Obligatory
    transport target for business system XID_FileSystem not found in
    System Landscape Directory
    We are yet to install PIQ system.
    All the interfaces in the old XID system have transport target of XIQ system.  I removed the  transport taget for the interface, but transport target is still showing in the Business system under transport target head.
    How can we overcome this issue as we will not have PIQ system atleast for two weeks.
    Thanks in advance,
    Regards
    Chandu

    Hi,
    You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
    Illustrated with DEv & PRD here.
    Procedure:
    1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
    2) Call SLD (System Landscape Directory) Component from the Integration builder
    Save all the Following .zip files on the Local Desktop
    3) Select the Software Component & say Export that you want to Export from DEV
    Server to Production server and which is going to use in the IR of XI
    4) Also Select the Product of the above SWC and say Export
    5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
    6) Select the Business System(s) & say Export; those are associated with above Exported
    Technical systems.
    In Production Server
    1) Logon to the SLD of the Production Server.
    2) Create a Technical System and Business system which points to the Production SAP R/3
    3) Go to Administration TAB in the main page of SLD
    4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
    5) Click on Browse and select the .zip files that is to Import into Production Server,
    Which were stored on the local desktop at the time of DEV Server Export
    And say Import Selected File Option
    By this we exported and imported the SLD Objects
    Now we have to create transport groups and transport targets in the Production server of SLD
    Creation of Transport Groups
    Edit GroupsGroup1) Select the Business systems 
    2) Click on New Group and give the name of the group as DEV_group & select the
    Corresponding Development serveru2019s integration Server
    3) Similar way create another group for Production serveru2019s business system as
    PRD_group and select the Production serveru2019s integration Server
    Creation of transport targets
    This is to Define which business systems in two different groups correspond to each other
    1) Select each Business system in the SLD and select transport TAB---click on
    Add/Change Target and select its corresponding target business system.
    For Example:
    If you select the business system of Production XI server means
    In the target you have to select group as DEVGROUP and the business system of Development XI server.
    Like this do the same for other business systems also
    Ex:
    BS_PRD_Integration Server----
    BS_DEV_Inetration Server
    How to create Transport Groups & transport Targets
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Regards
    Seshagiri

  • Automatic transport not working

    Hello,
    Could you please help me.
    after the offline backup, the automatic transport from DEV to QAS not working.
    when i check the tools transport on STMS , i tak this error.
    DB Connect ==> Link to database failed.
    Offline call ==> connect failed
    Best Regards,
    nana

    Have you automated the import process in DEV 005 ?
    Then the job will be running in the system.
    TMS_0000000003TMS_TP_IMPORT.
    Regards,
    Raja. G

  • Regarding query transport in BW quality system

    Hi Experts ,
    When I transport my query to BW quality system. It is showing error like "error activating element " .
    I searched in SCN and found that name for this technical element can be seen in RSZELTDIR table.
    I got technical name and it was query name itself. Again I transported only this element and it is giving same error.
    I am working in BW 7.4 and fresh implementation is going on .
    Is there anything which is missing while transport query in quality system .
    I have attached snapshot .
    Please help.
    Thanks
    Devesh Varshney

    Hi,
    Please try to check and follow below steps.
    1. Thru RSA1-->transport connection, collect your query and all elements(RKC,CKF,variables ..etc)
    2. Later check qll query elements are saved in custom package or &tmp. if its in $tmp then save package and store into custom package.
    3. collect objects into new Transport request.
    4. Check your transport request have any inconsistencies thru program - RSO_TLOGO_CHECK_REQUEST. Or
    5. later release and import to targets system.
    Even cross check query have any inconsistencies thru program - QUERY_CHECK.
    if you get error, please share error information in detailed.
    Thanks

  • Client transport from one sap system to another one

    When I want to make a client transport from one sap system to another (i.e. the source system is a system without a enhancement package and the destination system is with ehp5) can it be that there come critical conflicts in the modules (like FI, CO or HCM or other ones)?

    Hi Damian,
    It is not recommanded to import TRs from SAP system not at equal level.
    Get both the systems at same level if possible.
    But still if you have senario like this , pls ask to transport owner about changes included to undersatnd criticallity
    Regards,

  • Transport request from development system to testing system

    Hi,
    I have collected necessary objects in (development) the transport request except 0DUNN_AREA infoObject .Because info object  0COMP_CODE is compounded with Info object 0DUNN_AREA and 0COMP_CODE is in revised version in development system (But available in active version in testing). Suppose I release that transport request from development system to testing system  it get overwrite 0COMP_CODE  in testing system?
    Thanks

    Hi Jk,
    Depending the same technical names it will get overwrite in the testing server. But if the object 0DUNN_AREA is necessary in any objects which u have collected then u havce to collect it in the rtequest or else u will get RC8.
    Khaja

Maybe you are looking for

  • スキャナー画像の印刷について

    フォトショップアルバムNimiですが.スキャナーで取り込んだ画像を印刷する際.印刷サイズを選択しますが.印刷サイズはE,L,2Lなど種々サイズが選択できますが.等倍で印刷したい時は どのようにしたらいいのでしょうか?(カスタムモードでサイズ設定??) ■OS:WIN−XP ■ソフト:PHOTOSHOP Album 2.0 Mini

  • How to download oracle 11g Developer

    I have been heard from a friend that oracle launch developer 11g. but I cant find it in download section. Would you please tell me from where to download it. Regards Naeem

  • Report after improper shutdown never works (ok, worked twice)

    Hi, In the past three years, after 62 freezes, 10 kernal panics and other problems, I got my second window from the OS after rebooting, that says something like, the system did not shut down properly; would I like a report (or report it to Apple)? I

  • Frequency of Planning Run ?

    Hi Experts, I have a query with respect to the frequency of planning run in APO SNP.. 1. If i receive forecast from DP once a month, shoud the frequency of SNP planning run should also be month ?? What all conditions should prompt me to take the SNP

  • How to addlong distance phone numbers to contact list

    do you have to add 1 in the number or does it add it when you call