Automatic wake up when there is no shcedule for that

Hello,
Do doy know how to check why the machne is wakening always at 7pm, there is no schedule fro wake up enabled, also in energy saver, options there is no option selected., all is disabled.
but the machines wakes up constantly at 7pm..
how to check why it is waking up?
is an software update issue?
thanks a lot

Me too! Lots of stuff written to system.log that looks like bad errors, but most seems to be normal but for this entry for 00:10:01 (system was set to sleep at midnight) in the middle of the 19:00 blabber:
May 2 19:00:08 grumpys-mac-pro SystemUIServer[193]: Error: ACInterfaceGetPower() called with invalid interface
May 2 19:00:08 grumpys-mac-pro kernel[0]: -- PHY Specific Status Register (17d) = 0x8040
May 2 19:00:08 grumpys-mac-pro SystemUIServer[193]: Error: ACInterfaceGetPower() called with invalid interface
May 2 00:10:01 grumpys-mac-pro kernel[0]: System Sleep
May 2 19:00:08 grumpys-mac-pro SystemUIServer[193]: Error: ACInterfaceGetPower() called with invalid interface
May 2 19:00:08 grumpys-mac-pro kernel[0]: System Wake
May 2 19:00:08 grumpys-mac-pro SystemUIServer[193]: Error: ACInterfaceGetPower() called with invalid interface
May 2 19:00:08 grumpys-mac-pro kernel[0]: Intel8254x -- Link Up -- 00:17:f2:02:51:d2 -- called by interruptOccurred() --

Similar Messages

  • Any body know when there will be maps for Israel?

    Any body know when there will be maps for Israel?

    Well, I was positively surprised, in the way that I actually got quite an informative answer from Navteq:
    Thank you for contacting NAVTEQ Maps.
    Unfortunately at this stage we do not have a precise release date available for the Israel map.
    We do apologize for the inconvenience.
    Should you require additional information, please send us your feedback by replying to this email.
    With kind regards,
    NAVTEQ Maps Customer Service
    Nokia Location & Commerce
    PO Box 501
    7300 AM APELDOORN
    THE NETHERLANDS
    But still no info whatsoever on when Israel would be available for Nokia maps.

  • How Do I - Display a group when there is no data for the group?

    I have a report where I'm grouping on a numeric county number. Currently, if there are no records for that county, that report group doesn't display. My users want each county printed even if it has no data.
    The numeric values for county range from 1 - 85. I'm using CR 11.5 and pulling data from a Teradata database.

    Hi. I had already thought of doing an outer join on the county column of the county look up table. The problem is that this transfers the selecting and counting of the targeted data from the SQL statement to the report, specifically most of the formula fields itself. And given that the report is parameter driven, it would make maintenance of the report not so much fun. The solution ( I think, still have to code it) is to take my original inner join query and UNION it to a query selecting only the county column from the county look up table. I just add null valued columns to match the number of columns in the original query. This way I get at least one county record to satisfy the display of each group and only minimally increase the actual number of records the report has to process.

  • HT4914 how do i Download my entire collection from iTunes Match, There is an option for that or do i have to download each album separately?

    i want to Download my entire collection from iTunes Match with just One click, Or somenthing like that, but i don't know if there is an option for that or if i have to download every album one by one

    Welcome to the Apple Community.
    Select all your content in iTunes and choose download from the contextual menu that appears when you ctrl-click on your selection.

  • HT4890 how do i view photos from icloud on my PC, there is no icon for that purpose

    how do i view photos from icloud on my PC, there is no icon for that purpose

    If you have Outlook 2007 or higher on your PC, you can print your iCloud calendar from within Outlook.  If you don't, and are accessing it on icloud.com, about all you can do is take a screenshot using your print screen key and print the image.

  • How to fill column value of a matrix with specific color when there is no value in that specific cell?

    Hi All,
    I need to create a 5/5  matrix in SSRS report. The data will be :
    Col_Side   Col_Header   Col_data
    1                  1                1
    1                  1                 1
    1                  2                1
    1                  5                1
    1                  5                1
    1                  5                1
    2                  3                1
    2                  5                1
    3                  1                2
    3                  1                2
    3                  1                2
    4                   2               1
    4                   4               1
    5                   1               1
    5                   1               1
    5                   5               1
    So, the matrix column will be Col_Header and matrix row will be Col_Side and count(Col_data) will be on the data.
    Finally, it will create a 5 by 5 matrix with Count(Col_data) as its data for each combinations. If there is no combination (for ex: in the above data we do not have no combination of (1,3) , (1,4) , (2,1) etc..) then the matrix will be filling that corresponding
    cell with zero.
    Here I need to fill the cells with some colors based on some criteria.
    I need to fill (5,3), (5,4), (5,5) combination with "Red" color.  Like this , I need to give different colors in each of the cells. Here, (5,5) combination will be having 1 in its cell.  (5,4) and (5,3) will be having zero in its corresponding
    cells. I 'm trying to fill all the 3 cells with "Red" color. But, I am able to fill only (5,5) with "Red" color. Since the other 2 cells (5,3) and (5,4), has zero in their cells, it will not fill the cells with "Red" color. 
    How can I fill those two cells (5,3) and (5,4) with red color?
    I know this is very vague. I have no option to give the picture here..
    Please suggest

    Hi Julie,
    According to your description, there is a 5/5 matrix with three fields: Col_Side, Col_Header, Col_data. You drag Col_Side field to Rows, Col_Header to Columns and Col_data to Data, then filling blank cells with zero using expression. Now you want to fill 
    (5,3), (5,4), (5,5) cells with red color using expression, but it has no effect on cells (5,3) and (5,4).
    According to my test, the expression has on effect on cells (5,3) and (5,4) since there is no corresponding data and the cells are blank. As a workaround, we can insert data for cells (5,3) and (5,4) in dataset, then use expression by following steps:
    In the dataset, insert two sets of data (5,3,0), (5,4,0).
    Right-click the cell of data, click Text Box Properties.
    Click Fill in left pane, click (fx) button, then type the expression like below, then click OK.
    =iif(Fields!Col_Side.Value=5 and Fields!Col_Header.Value >=3 ,"red","white" )
    The following screenshot is for your reference:
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

  • Why do SQL sample programs work when there is no entry for the data sources in the ODBC Data Source Administrator that are used by the sample program?

    Hi,
    I am trying to understand how to access an SQL database from CVI.  
    I don't understand how the sample programs shipped with the toolkit can access the database they use if it is not listed in the ODBC Data Source Administrator.
    In the code, I see the line:
    hdbc = DBConnect ("DSN=CVI SQL Samples");
    However, there is not an entry that I can find in the ODBC Administrator for "CVI SQL Samples."
    The SQL help suggests there should be a User DSN named, "CVI32_Samples", but I don't see that entry in the ODBC Administrator on my win-7 system.
    I believe the sample program is accessing a database file named, "C:\Users\Public\Documents\National Instruments\CVI\Samples\sql\samples.mdb".
    Exactly how is the call to DBConnect() translated to the file, "samples.MDB", if there is no entry in the ODBC Administrator?
    Regards,
    Mark 

    I figured it out.  There is a 32 bit ODBC administrator and a 64 bit ODBC administrator.  The ODBC administrator I run through the control panel is the 64 bit ODBC administrator. To access the 32 bit administrator I need to run, "C:\Windows\SysWOW64\odbcad32.exe".
    I am running the samples in 32 bit mode, so I need to use the 32 bit ODBC administrator.
    Best,
    Mark

  • When there will be Maps for Israel roads??

    I have read a few months ago that Israel already has been mapped by Navteq so why the maps aren't available?
    When we here in Israel could finally use Nokia Maps??

    Well, I was positively surprised, in the way that I actually got quite an informative answer from Navteq:
    Thank you for contacting NAVTEQ Maps.
    Unfortunately at this stage we do not have a precise release date available for the Israel map.
    We do apologize for the inconvenience.
    Should you require additional information, please send us your feedback by replying to this email.
    With kind regards,
    NAVTEQ Maps Customer Service
    Nokia Location & Commerce
    PO Box 501
    7300 AM APELDOORN
    THE NETHERLANDS
    But still no info whatsoever on when Israel would be available for Nokia maps.

  • Premiere CS6 not supporting AVC-G25/50P will there be an update for that?

    Good morning Adobe,
    I own a Panasonic AJ-PX270 with the P2 content format. I filmed using the AVC-G25/50P format, but that is not supported when i want to import the file structure into my Premiere CS6 it gives me a standard error.
    Does anyone know what file format i have to use in my sequence to get this imported?
    Will there be an update for this?
    I have also asked Panasonic to provide me a solution, haven't heard from them.
    Perhaps someone knows how i can convert the files into another file format outside of premiere?
    thank you very much!
    Ruud van den Einden

    Yes, it's Java update 16 for Mac OS 10.6 that broke lots of stuff.  The 51 comes from it updating Java to 1.6_51.  There is an update to the update for 10.7 and up posted, but is there one for 10.6?
    UPDATE:  Never mind.  If you go to the download page for Java update 16, it appears that it has been silently updated.  Although there isn't any indication of the fact that it has been fixed, the build number is different (20.51-b01-457 instead of -456).

  • How do I: swap image in background when I have overriding CSS for that div

    Hi: let's see if I can properly explain this delema:
    Goal: I want to hover on spry menu main menu items and have the container background image change
    Catch: I am using a template and have different background images on each page so I had to insert an inline CSS rule for the container bg image that overrides the template.
    Now I want the background image to change when I hover over the main menu items
    any ideas??
    site can be seen at www.summitcreekcapital.com
    THanks, Nancy

    I don't see any real need to switch style sheets for something as mundane as change of bg image.  Here's an alternative:
    1) Add this to the head of your pages right before the closing </head> tag:
    <script type="text/javascript" src="/js/bgSwitcher.js"> </script>
    <link href="/css/bgimages.css" rel="stylesheet" type="text/css">
    2) Then edit your menu items to add an onmouseover event that calls the "newbg()" function, with a memorable classname as a parameter appropriate for each menu item, like this:
    <li><a href="firm_overview.html" onmouseover="newbg('foverview')">FIRM OVERVIEW</a></li>
    <li><a href="firm_team.html" onmouseover="newbg('mteam')">MANAGEMENT TEAM</a></li>
    <li><a href="code.pdf" target="_blank" onmouseover="newbg('cethics')">CODE OF ETHICS</a></li>
    Please note my classnames were crafted to reflect the text of the link, like "Firm Overview" -> "foverview" rather than the imagename you will be using for the bg, so in the future if you decide to change that image, the classname will still make sense for that link!
    3) and then in an external style sheet named "bgimages.css" which I've put in a /css/ folder (but you are free to rename all these paths, filenames etc)
    put these:
    .oneColLiqCtrHdr #container.foverview {
        background: url(../pic01.jpg);
    .oneColLiqCtrHdr #container.mteam{
        background: url(../pic03.jpg);
    .oneColLiqCtrHdr #container.cethics{
        background: url(../pic02.jpg);
    Change the images and paths as needed of course. As always the path is always relative to the location of this css file.
    4) And finally, in an external js file name "bgSwitcher.js" which I've put in a /js/ folder, paste this:
    function newbg(classnm){
         var d=document;
         if (!d.getElementById) return;
         var c=d.getElementById("container");
         if (!c) return;
         c.className=classnm;
    Hope that all makes sense.  If I left you confused at any step just let me know.
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Why is Safari automatically going to the App Store when there is an advert for the app

    When I'm on a web page that has an advert for a game it automatically takes me to the App Store when I've not touched it, anyone know how to stop it as it's annoying.

    hi i just had same prob and what i did to sort it[well for me] was have another web page open at same time and i was able to access the apps page ..good luck

  • FireFox keeps coming up - security risk - when there isn't one for my SEARScard account.

    FireFox automatically says security risk when I go to this account. But there is no problem - it is a secure site. I don't know what to do to update FireFox for this site.

    FireFox automatically says security risk when I go to this account. But there is no problem - it is a secure site. I don't know what to do to update FireFox for this site.

  • My iMac won't wake up when it's been asleep for awhile

    Each morning now, (since the last update of ML) my iMac won't wake up from sleep when I try from either
    my bluetooth keyboard or mouse. Seems like it would be a bluetooth connection issue but how do
    I make sure it will not interfer with waking up my computer.
    I tried pushing the on/off button briefly to get it to wake up but no luck there. I always have to restart
    it.

    This sounds like the intermitent problem that has been around for a few users since some point during 10.6 Snow Leopard. I had the problem off and on and found the only 'fix' that worked 100% was to set: System Preferences>Energy Saver and set 'computer sleep' to 'never'.

  • How do I stop the "Reset Firefox" prompt appearing when there is no need for it?

    Every time I start Firefox I now get the reset firefox prompt in the status bar:
    "It looks like you haven't started Firefox in a while. Do you want to clean it up .... etc."
    I use Firefox practically every day, so it is not true that I haven't used it in a while. After a bit of research, I read that Firefox may display this prompt if it has diagnosed other problems, particularly with add-ons. I haven't noticed any problems in my normal use, and I don't think that it is reasonable to expect me to wipe all my installed add-ons and then re-install and re-configure them again just to make this annoying prompt go away, when it is not giving me any details about the so-called "problem".
    Is there any way of getting Firefox to tell me what it thinks the problem is so that I can try to fix it? Failing that, can this prompt be disabled completely?

    I have repeated the test with nightly, but this time created the new profile on a local filesystem (ext4 FWIW) rather than an NFS-mounted one. As before the timestamp on .parentlock is not updated when firefox exits, so almost certainly a bug. If there is a problem with permissions/ownership, that problem is created by firefox, so still a bug :-) (given that the profile is a brand new one).
    I'll report this on bugzilla as soon as I can.

  • When I go to disc utility, repair disc is not functioning, neither is the verify disc. There is a statement that says,"start up from the mac OS X intallation disc and then choose utilities Disk utility. However there is no option for that

    Verify disc and repair disc are not working.  They give me the option to install the "installation disc" click on utilities>Disk utility from there.  When I try this, there is no option to do this that I can find.  Can anyone help me to do this?

    You can't run Repair Disk from the Utilities folder. With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.

Maybe you are looking for