Automatically set print settingsto the standard preset?

Is there a way to automatically change print settings back to the standard preset after a print job has completed?
I find that after using a preset other than standard (duplex, draft, legal size, etc.) I quite often forget to check the preset on the next print job and waste a lot of paper and ink printing a document in an undesirable format.
Any advice would be greatly appreciated. Thanks.

Would something along these lines would work???
"if printing 1:1 is critical, my recommendation would
be to have an area on the page(s) for which scaling must be performed
where you explicitly state the requirement for no scaling AND in which
you place an line of known length, let's say an inch or a centimeter with
text that warns that if that line is not exactly at the size specified,
to reprint without scaling."
(extract from post at: http://lists.frameusers.com/pipermail/framers/2008-March/011530.html)

Similar Messages

  • How to automatically set Print Scaling to 'None'

    Is there any way to automatically set print scaling to 'none' on an existing PDF document?
    This setting is set manually by going to File > Properties, and then going to the 'Advanced' tab and changing the 'Page Scaling' preference from 'Default' to 'None'. This preference can then be saved with the document.
    There seems to be no way to do this via javascript but if anyone has found a way to automate this that would be great!!!
    Ideally I want to run this as a batch process across a number of PDFs. Maybe as a last resort there is a way to do this using "execMenuItem"????
    Many thanks in advance for your help!!!!
    HJ

    Would something along these lines would work???
    "if printing 1:1 is critical, my recommendation would
    be to have an area on the page(s) for which scaling must be performed
    where you explicitly state the requirement for no scaling AND in which
    you place an line of known length, let's say an inch or a centimeter with
    text that warns that if that line is not exactly at the size specified,
    to reprint without scaling."
    (extract from post at: http://lists.frameusers.com/pipermail/framers/2008-March/011530.html)

  • Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

    Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
    Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
    Other cases:  However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
    NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
    Steps followed:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
    Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
    On the segment builder of the WebUI set any filter (Example: “TODAY”).
    Steps in detail:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
    SQ02.
    (Image deleted)
    Review Data Reading Program code (Code attached)
    (Image deleted)
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
    Create Data Source
    (Image deleted)
    Infoset: CRM_MKTTG_BP_BIRTHDATE.
    Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
    (Image deleted)
    Result:
    (Image deleted)
    Attribute List
    Creation of the Attribute List
    (Image deleted)
    Assign Data Source:
    (Image deleted)
    Selection of the Birth date as a filter in the Attribute list:
    (Image deleted)
    Result:
    (Image deleted)
    Segment builder of the WebUI:
    Access to WebUI with marketing role.
    Create Segment:
    Creation of Profile Set
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
    Result: it never return any results no matter the filter you specify.
    Other cases:
    Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
    We fill the form and select “Extraction from Query”:
    Press SAVE and define which fields will be available for selection and which of them will be visible.
    RSA3: Extractor checker in order to test the Data source:
    We specify the Data source:
    IT DOES RETURN RESULTS:
    ALV Grid:
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
    Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group.
    Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
    Define Segmentation Basis:
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
    Define Reports for Creating Segmentation Bases
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
    Define Usage for Segments:
    Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
    Attribute List:Category:
    There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
    Usage ID
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

    It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
    CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
    1966298: MGR_GUID is not populated correctly to infoset read program
    2007687:Segmentation InfoSet queries saved with incorrect Master Group
    For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
    Issue solved

  • REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

    Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
    Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
    Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
    documents which contain some of their pages in landscape orientation.
    publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
    documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
    Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
    Thank you in advance.
    Message was edited by: George Notaras
    Improved descriptions of example documents.

    To add to this, if you prefer you can separate your JavaScript from your JSF pages.
    Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
    Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
    You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
    (This can also be a URI reference to a JavaScript file hosted on a web server)
    <f:facet name="metaContainer">
      <af:resource source="/js/myJsFile.js" type="javascript"/>
    </f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
    It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
    A solution is to use <trh:script>.
    Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
    then in place of the above code use:
    <f:facet name="metaContainer">
      <trh:script id="script1" source="/js/myJsFile.js"/>
    </f:facet>Now after a page submit the JavaScript still functions.
    Edited by: Matthew Carrigy on 12/08/2009 10:39

  • Is it possible to change the automatically set image on the new iMovie Theater title screen?

    I made a few movies on the new iMovies 2013 then uploaded into iTheater. I love the software and its ease of use. However, I noticed iTheater automatically sets the title image. Similar to youtube, iTheater probably uses the video mid point image as default. Is it possible to change the set image on iTheater?

    Unfortunately, no.

  • Can you set print from the samsung stratosphere mobil phone

    Can you set up the mobil phone  samsung stratospher to print to the hp officejet pro 8600?

     Bettielittle118, Hope you are doing well and welcome to the HP forums. 
    Yes you shoud be able to print from the Samsung Stratosphere as long as is running Android
    If what you want is to print from anywhere you must use HP ePrint go here to see how to start with this super free service. 
    This will give more control but it can be use only when the device and the printer are in the same network i.e. Home Network
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • No request has been set up as the standard transport request for BEx object

    Hi gurus,
    I have this error in a query . Have someone any ideea what is this?
    Thanks,
    Ramona

    Hi,
    Before you create a query you have to assign a global request to Bex application.
    To do this goto Transport connection of RSA1, In the tool bar you will see a icon Bex (Create transport request for Bex). Assign a request for it. After doin so, you error will be resolved.
    -- Selva

  • Changing Printer Dialogue Box Standard Setting

    Help! This is driving me crazy. I print thousands of documents every week from Filemaker. For some reason - probably something I have done ages ago - my 'Standard' preset in the printer dialogue box defaults to printing 2 copies. Yes I know it's easy to just change this manually to 1 copy but I have tried every way possible to change the 'Standard' preset and have failed. Does anyone know how to do this? I called Apple Support and they were useless.

    It might help if you delete the following prefs files in your home directory's Preferences folder. They have the following form:
    com.apple.print.PrintingPrefs.plist - the general prefs file if the setting is not related to presets, and you might want to delete this one last in case deleting the other two, if they both exist, works.
    com.apple.print.custompresets.plist
    com.apple.print.custompresets.forprinter.<printername>.plist
    You could also try changing this value with the CUPS page: http://127.0.0.1:631/
    Hope this helps.

  • AVGetOptimizerPresets and 'Standard' presets - name is Acrobat language-dependent?

    I am calling  AVGetOptimizerParamsForPreset with "Standard" as the presetName parameter - this works fine on an English OS (with English Acrobat). However, on a Japanese OS (with Japanese Acrobat), it fails - apparently, the name "Standard" is in Japanese in this case (標準).
    I want to use the Standard optimizations in both cases - how do I select those settings without regard to the version of Acrobat I am running in?
    Does AVGetOptimizerPresets always return the Standard set first, such that I could call it and use the 1st string returned as my presetName argument to  AVGetOptimizerParamsForPreset ? http://livedocs.adobe.com/acrobat_sdk/9/Acrobat9_HTMLHelp/API_References/Acrobat_API_Refer ence/AV_Layer/General.html#AVGetOptimizerParamsForPreset9728%28%29 http://livedocs.adobe.com/acrobat_sdk/9/Acrobat9_HTMLHelp/API_References/Acrobat_API_Refer ence/AV_Layer/General.html#AVGetOptimizerParamsForPreset9728%28%29

    Anyone from Adobe tell me if the 1st preset returned by  AVGetOptimizerPresets is always Standard? Or how to ask for the Standard preset from Japanese Acrobat?
    If I get no answer, my work-around will be to first try to load the preset with the name 'Standard' and then, if that fails, to get the one named '標準'. Bogus, but I think it'll work.

  • Name of the standard FM called for displaying address in Smartform.

    Hi all..
    Wat is the name pf the standard FM that is called wen we use address in smartform,inputting the address number...
    Regards
    Rudra

    Hi,
    if we Inclue Address in Address Node, System reads address data directly from the data base tables.
    Inserting addresses:
    One can use the address node to insert an address into the form. This guarantees that the address is formatted according to the postal rules of the sender country.
    1) To create an address node , call the context menu for that node in the tree structure that one wants to contain the text and choose create->text
    2) Enter a name for the node and a description
    3) Determine the address type on the general attributes tab
    4) For organizational addresses one has to specify the address number, for any other one has to specify the person number and the address number
    5) In the box additional addresses one can maintain other attributes to specify how to display the address
    Addresses are printed using the ADDRESS_INTO_PRINTFORM function module.
    To enable the ADDRESS_INTO_PRINTFORM function module to call existing versions of an address for print output, the application program has to transfer the address number for address type 1, or the address number and person number for address types 2 and 3, to the function module or to SAPscript/SAP Smart Forms.
    If SAPscript/SAP Smart Forms are used for printing, the address number (or address number and person number) is to be specified here as a parameter. The ADDRESS_INTO_PRINTFORM function module then controls internally which version of an address is printed:
    In the standard system, printing of address versions is only supported for Japan. Besides the default version, the versions Kanji (K) or International (I) can also be printed.
    follow these links for brief information.
    http://www.sap-press.com/downloads/h955_preview.pdf
    Regards,
    Omkar.

  • How do I go about setting up my new wireless all-in-one Epson XP-215 printer to my MacBook Pro? The system is not automatically detecting the printer ad the furthest I get is "System" keychain user and pswd but I am a new user to Mac.

    I am a new user to Mac and trying to set up an Epson XP-215 All-in-One printer without any success. The Mac Book Pro is not recogising the Printer automatically and when following the instructions to add the printer, it gets as far as a display box for teh user and password for "System" Keychain but I am not sure what info to add there...
    The printer is meant to have a function calle dAir Print also that is meant to be used for Mac but I cannot figure out any of this! Why would the MacBook Pro not automatically pic up the printer? Please help...

    If you have not already done so, you should read the user manual that came w/the printer and/or contact Epson tech support. 
    Check out the following KB Articles: 
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    Also check out What to do when you can't print 

  • Color Settings\Colorsync settings don't stick when setting printing presets

    Hello
    Posting this here, instead of in the iPhoto Forum
    In the "Print" dialog box (the dialog box you see after you pass through the iPhoto dialog box - same type of box as with most other OS X applications), there is a down menu to give you access to several categories of settings related to the print job.
    Here of course you can save printing presets (paper type, print quality, color management, etc).
    Why do ColorSync settings under the "Color Matching" dropdown not get saved with the other presets? Every time, the profile setting defaults to "Automatic". Is this a bug or is there something I am not doing correctly? Is there a good reason why they aren't saved along with other settings? Apple on-screen Help says "some settings cannot be saved in a profile, but this would seem to be a very handy thing?
    I use an Epson Artisan 800.
    Alternatively, can someone tell me what the behavior is of the "Automatic" setting?
    I recently profiled the printer and I am just looking for an easy/quick way at the time of printing to apply one of the three profiles based on the type of paper that is being used. I just figured this would be the easiest way to do it? (my question applies to any application - I posted here because this is of particular importance with iPhoto)
    BTW Is it me or is there surprisingly little information online about ColorSync workflows/behavior/relationships in OS X?
    Many thanks for any and all advice.
    Justin

    Hi Scott,
    Thank you for your posting in Windows Server Forum.
    First of all please update the RDC version to RDP 8.1 for better functionality. Then try to install below updates for windows 7 and check the result.
    Update rollup: Fix printing problems in Windows 7 and Windows Server 2008 R2
    http://support.microsoft.com/kb/2647753
    Hope it helps!
    Thanks,
    Dharmesh

  • How do I change the default settings in a printer's Default Settings Preset?

    I am running Mavericks, printing to an HP LaserJet 4050N via IP.  [The following behavior takes place whether the printer's internal settings are set to Duplex Printing is On or is Off.]
    I would like to set the default to print duplex, whether I am in an application or 'drag and drop' a file onto the printer icon (which temporarily opens the application, prints the document, and quits).
    I do not seem to be able to modify the "Default Settings" Preset to specify duplex printing.  However, I have been able to create a new "Default Settings-1" Preset that specifies duplex printing.  By selecting the "Default Settings-1" Preset, in any application, I get duplex printing without any problem.
    First -- problem:
    If I drag-and-drop a file -- e.g., .pdf or .docx -- onto the printer icon, it opens the application and uses the "Default Settings" Preset -- not the "Default Settings-1" Preset -- and prints single-sided.  How do I get drag and drop to use the "Default Settings-1" Preset to get duplex printing?
    Second -- issue:
    Bizarrely, if I am in an application, select "Show Presets", select "Default Settings-1" and click on "Layout", it sometimes shows that "Two-Sided" printing is "Off" and sometimes that it is set to "Long-Edge Binding" -- but that seems to have no deleterious effect on duplex printing!
    Any suggestions / explanations for my problem / issue?
    Thanks much,
    Avi

    Other than using the CUPS interface, http://127.0.0.1:631,which it sounds like you've done, I don't think there is a way to edit the Default Settings. The standard approach is to create a preset, the solution you've found.
    For drag and drop printing, you should be able to get to the print dialog and select your preset or turn duplex on by holding the option key down, selecting the file, then doing the drag and drop (either to a printer or to an open printer proxy application).
    I realize this isn't a solution, but I hope it's helpful.

  • How do I create a custom preset in my print window? I want to permanently turn off 2-sided printing under the Fiery Features?

    At my office I work on a mac, I print to a Canon C5240, my print dirver is current (Canon iR-ADV C5200s-B2 psv1.ous). We just got this new computer at our office and it defaults to 2-sided printing.
    The cannon people said we need change our printer setting on our sever to single sided printing, our IT guy says we have. However, we still continue to get all prints 2-sided.
    The only way we've been able to get around this is when we are in the print dialog: manually changing the page setting > Fiery Features > and turning off 2-sided printing-- every time. It's so frustrating.
    Is there a way to save this preset rather then have it always revert back to the default print settings?
    PLEASE HELP!

    Hello,
    Click on the Presets dropdown item, choose save as Default, Save As, or Maybe just Save depending on OS version.

  • When Firefox last automatically updated, it suggested that Adobe reader needed updating, now, with Adobe Reader 8, I can no longer print from the internet, only to file. Help please.

    When Mozilla Firefox last automatically updated, it suggested that Adobe Reader needed updating. After updating to Adobe Reader 8, I can no longer print from the internet, only to a file. I know the printer and its interface must be OK because Word prints normally.

    Problem solved, it was my oversight, I had not removed the check from the Print to File box in the print set up.

Maybe you are looking for