Automatically trigger the event to load data from Planning cube to Standard Cube

Hello,
We have a below set up in our system..
1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
2. An actual reporting cube which gets data from the planning cube above.
Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
This involves 2 things..
1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
2. Trigger the DTP which loads data from Planning cube to reporting cube.
We want to automate the above two steps...
I have tried few things to achieve the same..
1. Created an event in SM64,
2. In the Planning cube "Manage" Screen,  clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
3. Wrote a ABAP program which changes the setting of the planning cube (  " Change real time load behaviour " to Loading )
4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?

hi,
try to do the transformation directly in the input cube by using CR of type exit, more details :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
hope it helps.

Similar Messages

  • Unable to load data from an ODS to a Cube

    Hi all,
    I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: <b>"No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.</b>
    I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
    Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
    Thank you very much and kind regards,
    MM.
    May be this helps...
    When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
    Thanks again.

    Hello MM,
    Can you do the following..
    make the Total status Red Delete the request from cube.
    goto ODS -> Remove the Data Mart Status -> Try loading it again.
    The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
    Hope it will help!

  • How to edit data while loading data from W/O to Standard DSO?

    Hello,
    I am loading data from W/O to Standard DSO, during activation it got error out due to SID failure error for one infoobject(error is due to lowercase letter).But i can't change the infoobject setting and transformation.
    Is there any way to edit the data(either in W/O DSO or in new data of Standard DSO)?
    Thanks and regards,
    Himanshu.

    HI,
    Please check what is setting there in the transaction RSKC if it is set as ALL_CAPITAL then you must atleast chage the charecter setting, write a command in transformation, load to PSA and modify (Not applicable for BI7), Remove the setting in RSKC.(Not suggested).
    Cheers
    Vikram

  • Getting short dump at the time of loading data from R/3 to ODS

    Hi BW Grurus,
    I am trying to load data from R/3 to ODS, but after running for a few minutes it is getting into the short dump and displays the following run time error. So please give me solution how I can load data without getting short dump. I tried thrice but it is giving the same and failed.
    Run time error : TSV_TNEW_PAGE_ALLOC_FAILED

    Hi,
    Check, is start routine or individual routine in present in update/transfer rule?
    May be read large amount data (select * from) another ODS and put into internal table cause these type of error.
    Regards,
    Saran

  • What is the different to load date from SBIW and LO(lbwe)

    Hi all experts,
    I am wondering if i need to data to generate reports(infostructure S001) in BW. Can i just only load data in "business content datasources"(SBIW) ->select S001 OR I have to load data from LO.
    What is the different between two (SBIW,LBWE)
    Thank you
    Koala

    Hi Koala,
    After SBIW tcode execution you have a screen where another tcodes are accesible. Including LBWE. Namely, in SBIW screen
    'Data transfer to the SAP Business Information Warehouse/Settings for Application-Specific Datasources (PI)/Logistics/Managing Extract structures/Logistics Extraction Structures Customizing Cockpit' is LBWE tcode!
    As I already have answered to you
    anyone  experienced data load for S001?
    You need to choose between LIS extraction and LO extraction, not between SBIW and LBWE.
    BTW, managing LIS setup is situated in SBIW also:
    ...Logistics/Managing transfer information structures/Application-Specific setup of statistical data.
    Best regards,
    Eugene

  • Error while loading data from write optimized ODS to cube

    Hi All,
    I am loading data from a write optimized ODS to cube
    I have done Generate Export Datasource
    schedulled the info packge with 1 selection for full load
    then it gave me following error in Transfer IDOCs & TRFC
    Info IDOC 1: IDOC with errors added
    Info IDOC 2: IDOC with errors added
    Info IDOC 3: IDOC with errors added
    Info IDOC 4: IDOC with errors added
    Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
    Processing below is green
    shows update of  4 new records to Datapackage 1.
    Please provide inputs for the resolution
    Thanks & Regards,
    Rashmi.

    please let me know, What more details you need?
    If I click F1 for error details i get following message
    Messages from source system
    see also Processing Steps Request
    These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
    From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
    Thanks & Regards,
    Rashmi.

  • The error about loading data from ODS to master data.

    hi,experts,when I load the data from ODS to master data,there is an error messege:
    " InfoSource 8ZPA_0022 is not defined in the source system.
         Message no. R3005
    Diagnosis
         The InfoSource 8ZPA_0022 specified in the data request, is not defined
         in the source system.
    System response
         The data transfer is terminated.
    Procedure
         In the Administrator Workbench of the Business Information Warehouse,
         update the metadata for this source system, and delete the InfoPackages
         belonging to InfoSources that no longer existing ."
    But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

    Hi,
    as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
    regards
    Siggi

  • Automatic loading data from data files in the hard drive?

    Hi, I want to automate the process of loading data from a data file in the file system (e.g. c:\data\temp). I have the script to run using the loader (control file), but have to do manually. I basically have monthly data (exported into the data files from other systems) to load into the database and run the sql loader every month. I appreciate if you can tell me how to automate this or point to any tool. Thanks a lot!

    Depends on your version (it's really important to mention it anytime anyone posts here!)
    If you are on 10g, then DBMS_SCHEDULER can schedule anything you can do at the operating system. If you can write a script to run SQL*Loader, then you can use DBMS_SCHEDULER to automatically run that script.
    It's rather harder to do the same trick on any non-10g database. DBMS_JOB cannot, for example, perform OS commands (such as 'sqlldr'), so then you have to use your operating system's scheduling capabilities (at for Windows or cron for Unix/Linux... and knowing your OS also helps provide meaningful answers!)

  • Error when loading data from DSO to Cube

    Hi,
    After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
    Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
    Has anyone experienced a similar problem or have some guidelines on how to resolve it?
    Kind regards,
    Fredrik

    Hej Martin,
    Tack!
    Problem solved
    //Fredrik

  • Dump when loading Data from DSO to Cube

    Hi,
    i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
    any idea`s?
    thx!
    Dominik

    the Dump occurs in the last step of the last data pakage in the DTP Monitor.
    I checked the OSS note, but i don´t know how to check the kernel version.
    Now i used another DSO for testing and i got another Dump with a different name.
    After that i logged in again and it works with my test DSO data...
    But still not working with the original one...
    @Kazmi: What detaisl u mean exactly?

  • Help needed with loading data from ODS to cube

    Hi
    I am loading data from an ODS to a cube in QA. The update rules are active and definition seems right. I am getting the following error, in the update rules.
    "Error in the unit conversion. Error 110 occurred"
    Help.
    Thanks.

    Hi Chintai,
    You can see the record number where the error occured in the monitor (RSMO) for this data load > goto the details tab and open up the Processing area (+ sign). Try it out...
    Also about ignoring the error record and uploading the rest, this is done if you have set Error Handling in your InfoPackage (Update tab), but this would have to be done before the load starts, not after the error happens.
    Hope this helps...
    And since you thanked me twice, also please see here:-) https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/7201c12f-0701-0010-f2a6-de5f8ea81a9e [original link is broken]

  • Loading data from SAP BW standard table to master data text

    Hi,
         Can anyone please tell me the steps to load data from SAP BW standard table to master data text?
    How should the data source be created?
    Thanks in advance.

    Hi aparajith,
    Have you loaded the master data attr ?
    ECC Steps
    then load the attr text
    create the ztable using standard table using generic data source using table function.
    there you can select the which field you required
    check the data in RSA3
    BI STEPS: -
    check the source system connection.
    replicate the data source
    create of find the master data object for text (including attr)
    map the transformation
    run the info package
    create the DTP.
    check the data in target object.
    Thanks,
    Phani.

  • Quetsion about loading data from transactional infocube

    Hi,
    We have 4 transaction infocubes where the users data will be saved from their layouts and we have one more transaction infocube(A) where all these 4 transactionl data will saved to onecube say(A)
    We also load from A- to other basic cube(B).
    My questions are when
    1.I load from All these 4 trnsactional cube to A - Do I need to say transactional can be planned not loading allowed.
    2.When I load from A to b(basic cuvbe do I need to say - Planning cannot be allowed only laoding)
    Let me know
    Thanks

    If you want to load data from planning cubes to further data target using update rules or transformation, their requests need to be green (yellow request would not load further). In this case the target transactional cube should be in loading mode. If you do not want to do these things, you can look at using a copy planning function (but remember that planning function takes more time than BW loading - this difference would be really noticeable if the data volume is large).
    There are many threads on this topic - if you search, you can get more info.

  • Loading data from a remote machine

    Hi,
    I would like to know the process to load data from a file in remote machine to an oracle table. The load file is dumped to a folder in a remote machine and it is a pipe delimited one. I am using oracle 11g.
    Can I create a directory in oracle, which maps to the remote location, and create an external table?
    Thanks in advance
    Arun

    The best method would depend on the requirements. Are files regularly created on that server? What are the file sizes? Are files to be kept after loading for history or auditing purposes? Etc.
    You can run SQL*Loader on the remote platform and load the data, across the network, into the database.
    However, if the data set is large, it may be faster to zip that data, scp it across to the Oracle server, and then unzip and load it there.
    If the remote platform is a user platform and the user needs to load data - then that can be done via a web interface. User uploads the file to Oracle (via http). The file is received as a CLOB by the database. PL/SQL code can then process that file - either by parsing it directly, or unloading the CLOB to a local file and then loading that file via an external table.
    You'll need to look at what the requirements are, before looking for a solution.

  • Load data from PSA to ODS in Process Chain

    Hi All,
    I want to load the data from PSA to ODS. I am using 3.5 Version. I have created the Info Package to load the data from R/3 to ODS.
    I just want to load data in the following Condition
    1. Need to load data from R/3 to PSA.
    2. Need to load data from PSA to ODS.
    I need to include this two Info Packages in Process Chain.
    I dont find any option to load PSA to ODS through Process Chain..
    Pls Suggest.
    Thanks,
    Ram.

    Hi Ram,
             You can keep the settings in the infopackage to load data from R/3 to PSA (by giving the settings as PSA and then into datatargets). Specify the option Update in all data targets for which the Rule Exist unde rthe Data Targets Tab.
    Then in Process Chian, there is an option by the name REad PSA and Update Datatarget under the node Load Process and Post-Processing in the Process Types.
    In the varaint, specify the infopackage name and save the varinat and uise it in the PC.
    Regards
    Sunil

Maybe you are looking for

  • How do I create custom HTTP Error Pages for a Weblogic Server

    I need to be able to display custom HTTP error pages such as a 404 from my Weblogic Server when my web application is not deployed. Is this possible? I have seen some suggestions about putting something like: <error-page> <error-code>404</error-code>

  • Can't drag and drop in Finder with trackpad or magic mouse

    I can't seem to drag and drop anthing in the Finder window since updating to Mavericks (10.9). I've tried changing all magic mouse and trackpad settings.  I can drag and drop windows and apps on the dock.  No sure what the issue is....any help is app

  • Device malfunctioned

    When I plug my iPod Nano 3rd generation into my computer it says; "One of the USB devices attached to this computer has malfunctioned, and windows does not recognise it. Also the screen it black and restarting it doesn't work. When I turn on iTunes n

  • Problem while installing Creative Cloud

    I am have a problem installing Creativ Cloud Desktop. I donload it on to my computer and start the setup. It says initailizing installer, then an error type of message pops up telling me to install CC, even though I just tried to.    The error messag

  • Implementation of K-Nearest Neighbour in Java

    Please is there anyone who can take me through the process of implementing K -nearest neighbour in Java.