Available for Remote Work

CLD & CTD in Ireland available for remote work. Test engineer of over 9 years with experience of doing remote projects.
Experienced in coding and deployment of turn key automated test solutions.
Message me at [email protected] if you are interested.
Thanks,
Shane.

Hi All,
Just to say I am still available for remote contract opportunities and that I am now also a Certified TestStand Architect.
Message @ [email protected] for more information..
Thanks & Regards,
Shane.

Similar Messages

  • Chicago Based Labview Electrical Engineer Available for Remote Work

    I work while you sleep
    I have over 8 years experience in Labview including most recently; GPS route mapping, CDMA and GSM test systems, OFDM and FSK test systems, and standalone applications (details available upon request).
    I'm looking for remote projects to work on in the evening to supplement my income and pay for all the expensive Christmas gifts.  I am willing to do work at reasonable rates based on project goals.  I have my MS in Electrical Engineering and over 8 years of digital hardware design experience as well as automation experience with Labview.  I have pretty much automated every piece of test equipment that has crossed my path. 
    Full source code, documentation, flow diagram, etc. upon project completion!  Labview 8.5, Windows XP 
    Regards,
    Labview 4 You
    Electrical Engineer,  Labview Guru

    This is a repost to show this thread is still active.
    I have over 8 years experience in Labview including most recently; GPS route mapping, CDMA and GSM test systems, OFDM and FSK test systems, and standalone applications (details available upon request).
    I'm looking for remote projects to work on in the evening to supplement my income.  I am willing to do work at reasonable rates based on project goals.  I have my MS in Electrical Engineering and over 8 years of digital hardware design experience as well as automation experience with Labview.  I have automated almost every piece of test equipment that has crossed my path. 
    Full source code, documentation, flow diagram, etc. upon project completion!  Labview 8.5, Windows XP 
    Regards,
    Labview 4 You
    Electrical Engineer,  Labview Guru

  • Experienced CLA, CTD available for project work.

    Experienced CLA, CTD and CPI available for project work.
    Work model would be remote activity with availability for kick-off and integration onsite travel.
    Clear communicator with excellent presentation and customer facing skills.  Deep experience with large swath of NI technologies and hardware.  Wide capability with peripheral software tools such as sql, Amazon - AWS, bug tools, agile development, SCM, remote connectivity, networking, web service etc.
    Please email for more discussions:  [email protected]
    Michael Weir

    Hi All,
    Just to say I am still available for remote contract opportunities and that I am now also a Certified TestStand Architect.
    Message @ [email protected] for more information..
    Thanks & Regards,
    Shane.

  • Make thunderbolt storage device be available for remote access

    I have an external thunderbolt HDD (Drobo 5D) that I'd like to make available for remote file access. A simple file browser should be sufficient, but the prettier the better of course ;-).
    Essentially, I'd like to "dropbox" my Drobo 5D. I have a pogoplug but that requires plugging my thunderbolt device into a USB 2.0 port...so that won't work out too well.
    Any ideas?

    I also have a very similar concern.
    I am about to purchase a hard drive enclosure with ethernet capability. If you go to ebay and search for "3.5 ethernet" you will find many "USB 2.0 LAN Ethernet Enclosure" for $30-40. Then I will buy a 3.5 IDE hard drive of 500GB for about $100.
    My idea is to attach this setting to my Netgear wireless router and access photos, music and videos from my laptop and desktop.

  • Labview developer-search for remote work

    I have 3 year experience as Labview developer. I have good skils in controling devices using different interfaces and automated tests.
    I'm searching for some small projects which can be resolved using remote work. If necessary I can travel several time (in Europe).
    Also I can aproach any specific project if initial data & rquirement are very clear defined and is no time presure.
    If interresed e-mail to [email protected] .
    Thank you! 

    Hi there,
    Sorry but I have already taken on a new contract. If you send me your email address I can pass your request to some people who could help you.
    Best regards
    Neil
    nrp
    CLA

  • File transfer option not available for remote devices under MAX

    I am currently using LabVIEW 2012 and am using a application running on a Windows 7 PC to communicate (TCP/IP over Ethernet) with a RT PC.  I have built an installer that installs a LabVIEW application as well as MAX on the Windows 7 PC.  After installation i can open MAX and browse under Remote Systems to my RT device but am unable to ftp files to the the RT device as the File Transfer feature on the drop down menu is not shown. (This PC does not have the LabVIEW development environment installed.)  Does anyone know if there are Additional Installers that are required to be included that will activate this feature or any reason why this feature in not available?
    Regards,
    Rob  

    Did you include the MAX FTP Client from the RT module in your installer? See this knowledgebase to see what I mean:
    http://digital.ni.com/public.nsf/allkb/571113c2ce05998e862574e8006005a2?OpenDocument
    Also, you can most likely just do ftp using windows explorer, if you prefer that method. Just open up windows explorer, and in the address bar type "ftp://x.x.x.x/" (where x.x.x.x is the IP address of the RT PC you are accessing.
    Also, are you using the LabVIEW real-time module on your RT PC?
    Colden

  • Software Systems Engineer (LV, LV RT, LV FPGA, CVI TestStand, Veristand, C/C++) available for full/part time and remote project work

    I am a software engineer with lots of experience in embedded and test systems. I am a certified TestStand developer, and recently finished a cRIO based embedded system for a medical device company using LV RT and LV FPGA. I have done a lot of TestStand customization and APIs to HIL and other test equipment and created my share of Windows/Linux based C++ applications and libraries.
    I am located in Southeast Michigan and interested in both local and remote project work, as well as full or part time employment.
    I will be at NIWeek 2010 on Wednesday and Thursday. I am holding a session on Simple TCP/IP messaging on Thursday.
    If you would like to meet during NIWeek and/or request my resume please email me at [email protected]

    I saw your posting on the LabView discussion forum concerning your need for a LabView Software Systems Engineer.
    I am a consultant and I am currently available for contract work.
    I have done the things you describe as experience you would like to have.
    I have attached a "Fact Sheet" which describes some of the systems I have built.
    You will notice that I am experienced with developing hardware systems and controls as well as software systems..
    I have over 20 years of experience developing these kinds of systems and have worked with many different kinds of hardware/computer interfaces as well as numerous different software environments.
    If you are interested in discussing this further please call or email me.
    Tom Moser
    ForMost Systems
    North Canton Ohio
    330-470-0404 begin_of_the_skype_highlighting              330-470-0404      end_of_the_skype_highlighting x202
    email:  [email protected]
    Attachments:
    IS 071410a .pdf ‏253 KB

  • I deleted Bonjour, since I don't need it for remote printing.  Now I get the message " Airport Base Station has stopped working: and also a message saying APAgent.exe can't be found.  What to do??? Thanks.

    I deleted Bonjour since I don't need it for remote printing.  Now on start-up I get the message: "Airport Base Station Agent has stopped working" and also message: "can't find APAgent.exe.:  Do I need AP Agent??  What to do??  Thanks. 

    The APAgent monitors your AirPort base station and informs you if there are things like firmware updates available. This utility relies on Bonjour, but is not required for base station operation. However, Bonjour makes it easier for your PC to "find" the base station via the AirPort Utility and I would recommend that you keep it installed. If you don't want the APAgent, you can just use the Apple Updater utility (that was also installed when the AirPort Utility was installed) to remove it.

  • Is extractor 0FI_GL_4 (line items GL) available-compatible for remote cube?

    Hi,
    Is 0FI_GL_4 available-compatible for Remote cube? I changed parameter virtcube from space to '1' value. But when I regenerate DS in RSA6 virtcube parameter-value comes back to space. In RSA6 I see value 'D' (direct access) always.
    Thanks

    We donu2019t have ehp3, so i cant use 0FI_GL_14.
    Can we really compare 0FI_GL_14 and 0FI_GL_10  ?
    Because 0FI_GL_10 extracts not on document level but I need information (Work breakdown structure element(PROJK)) on document level.
    So I need both fields in extract structure u201CAccounting document number (BELNR)u201D and u201CWork breakdown structure element(PROJK)u201D.
    0FI_GL_10 contains none of them.

  • Maximum number of monitors used for remote desktop not working correctly

    My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
    At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
    I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
    Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
    Setting - Result:
    1 - 1
    2 - 1 (???)
    3 - 3
    It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
    Max

    Hi Max,
    Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
    7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
    Karen Hu
    TechNet Community Support

  • Programs that require a network connection won't work because there is no virtual IP address available for this session.

    Programs that require a network connection won't work because there is no virtual IP address available for this session.  Per application IP virtualization is enabled.
    There are in fact available IP address's within the dhcp scope.  Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?

    Hi,
    Thank you for posting in Windows Server Forum.
    As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
    Application Compatibility – Turn on Remote Desktop IP virtualization
    Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
    feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
    configuration of the next setting.
    Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
    When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
    mask using the slash notation, for example 192.168.77.201/24.
    Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
    More information:
    Microsoft RDS Policies explained (Part 2)
    http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
    Configuring Remote Desktop IP Virtualization II
    http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!

    I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!
    It started after the major update to iOS 7.
    I can't believe that this is so hard to do. It's just not letting me. I can add a bookmark to the home screen just fine, just not in a bookmarks folder anywhere I try.
    I've used Apple products since 2001 and have always loved how intuitive they are. But the Safari browser since iOS 7 has been the worst I've experienced. At least right in the beginning after that update.
    I'd really appreciate any help that doesn't just tell me how it's suppose to work...I know that.
    My iPad 4 is not affected with the problem and works as it should.

    To delete, tap "Edit" (tap to enlarge image)

  • CRM Availability Check not working for certain Item Category

    Hi there,
    I have a situation where for certain order type/item category combinations, the availability check on the same material is not working.
    The check is set up to happen in SAP ECC.
    I have checked the config. under SPRO->CRM->Basic Functions->Availability Check->Availability Check using SAP ECC
    as per many SDN posts on this, and everything looks fine.
    The new item category, which was a copy of an existing one, works (i.e. gives availability) for certain order types, but not others.
    If I create the same order directly in ECC, it works correctly every time.
    I searched the code (from consultants who set it up originally) and can see nothing specific to the order type/ item category.
    I also put a breakpoint on AVAILABILTY_CHECK function module in SAP ECC - it is not being hit, in the case where check is not successful.
    Breakpoints in MV45AFZZ (Sales Order userexit) also not being hit, but they are hit for the Order/item category combination when it works successfully.
    Any suggestions on where else this could be configured would be appreciated!
    thanks,
    David

    Hi David,
    One 'simple' reason for this could be that the copied item category does not have the
    ATP Profile set up in the item category in the IMG. Make sure you have an ATP profile assigned in the area 'ATP Profile' in the item category.
    Please see as well the SCN Wiki link:
    Availability Check CRM-BTX-BF-ATP - CRM - SCN Wiki
    Best regards
    Christophe

  • I have Firefox 5.0.1, and a theme I want to download says that it works with Firefox 4.0b9pre - 7.0a1, but at the top it says that it is not available for my platform. What do I do?

    I just downloaded Firefox 5.0.1, and one of the themes I want to download and try out says that it works with Firefox 4.0b9pre - 7.0a1. At the top, though, it says that the theme is not available for my platform. It has happened with some other themes as well, but I didn't check what versions they work with. I don't know what this means or what to do about it. The theme is at this link: https://addons.mozilla.org/z/en-US/firefox/addon/bloomind-ft-deepdark-2/

    It says:
    <blockquote>"Bloomind FT DeepDark 2" is a theme that has been created to transform the look of Firefox 4 for <b>Windows</b> users. It has been specially designed for Seven, but rendering is relatively accurate on XP and Linux (<b>I can t test it on MAC</b>, but for those who would like to try it anyway on that platform, <u>you can force download and install it</u>).</blockquote>
    So try to save that file via the right-click context menu.
    *http://kb.mozillazine.org/Themes

  • Does Av digital adapter works with the universal dock for remote control?

    if I only connect the Lightning to 30 pin adapter to the universal dock for remote control it works so good with music, spotify, Netflix, YouTube etc.
    but if I add the av digital lightning adapter to watch on Tv, the dock and remote control don't work anymore    what can I do? I want to watch stuff on tv and use the IR dock for remote control please help me what's going wrong?

    Thanks for your advice.
    I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
    Thanks

Maybe you are looking for

  • Cannot connect to iTunes (Error -25294)

    I am writing this because ever since I upgraded my titanium Powerbook G4 from OSX 10.2.8 to 10.4.1, I have been unable to access the iTunes Music Store. Every time I sign in, I get this message saying "iTunes could not connect to the music store. An

  • How to use copyPixels and mask some places?

    I've two images with the same size (49 x 90), they both are 8-bit depth. The first image has a purple backgroud color, the other one has a background color rgb(0, 255, 0) which is true green. The first image has a pixel doll with huge hair on her hea

  • Dynamic Time Selection in Plug-in Report Definition

    I've been trying to add the ability to select the time range to a report I'm writing for my plug-in. According to the documentation, the following block can be used: l_param_values MGMT_IP_PARAM_VALUE_LIST; l_param_values := MGMT_IP_PARAM_VALUE_LIST(

  • Importing mpeg-2 videos

    I recently bought a macbook pro, and had a question about mpeg-2 files. I just finished shooting a movie, and have been capturing it onto my PC to store all of the files. Now I want to bring only the good takes over to my mac to edit the movie on Fin

  • Needed configuration steps for sales operations and planning...............

    hi, sap gurus, good morning to all, my client says that on papers our target vs achievement is fixed that is for day wise, week wise, month wise and quarterly wise, 6 months wise and finally yearly wise. but when it comes to practical scenario, if de