Available Stock status (MM) - which table should I take and what are the fields ??

Kindly Suggest Me !!!
Report that outputs stock, grouped by Material type and Plant. The output shows Material no, Storage location, unit of measure and description in addition to group table using ALV.
Thanks in adv.
Bunty ( New to SAP )

Hello Bunty
When you run the report put in current month in date fields, then when you are in the report you can add the different fields you need.
At the top there is a button called 'Switch Drilldown', this enables you to view by Material Type etc. Fourth from the right is another button that looks like the standard variant button, here you can add or remove different figures for valuing the stock.
Don't forget that this report views periods so you can use average stock etc by changing the month.  Also make sure that any stock reports you are using reconcile with each other.
Michael

Similar Messages

  • I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?, I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?

    I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?, I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?

    In general most macs you buy are the same. If you will be doing quite a lot of editing of photos and videos, then the big things to look for are:
    Processor - 2.8ish GHz Intel i7 4-core - is about the best I have head of thus far.
    RAM - fairly easy to upgrade yourself, but 16GB is typically more than you will need for the next 5 years at least.
    iLife is reasonably good software for editing media, but as a photographer, you may have your own prefered software
    The good thing about Apple is that they don't sell ****** computers in general. They offer little in the way of customization of hardware which is both their strength and weakness.

  • I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

    I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

    your phone has not been compromised.  There have been no viruses, worms or trojan horses ever reported.

  • What are the fields in BDC table

    hi
    what are the fields in BDC table. what is the last entry

    hi,
    BDC table structure
    FIELD                     TYPE                            DESCRIPTION
    Program                CHAR (8)                      Program name of transaction.
    DynPro                   CHAR (4)                      Screen number of transaction.
    DynBegin               CHAR (1)                      Indicator for new screen.
    Fnam                     CHAR (35)                     Name of database field from screen.
    Fval                       CHAR (80)                     Value to submit to field.
    Hope this is helpful, Do reward.

  • I have 2 yr old Iphone 4 and have not backed up or connected to Itunes or backed up for 1 yr. I have new computer and want to connect and copy Itunes folder from external HD to new computer and install Itunes. What steps should I take and what precautions

    I have a 2 yr old Iphone 4 and have not backed up or connected to Itunes up for 1 yr. I have new Windows 7 computer and want to connect and copy Itunes backed up folder from external HD (a year ago) to new computer and install new Itunes and new IOS. What steps should I take and what precautions? I don't want to lose any data on my phone such as music, photos, contacts, notes, texts etc, nor lose music from prior backed up Itune folder. Apps should be OK from app store? Thanks for any help.

    Hello CosK,
    The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
    Transfer content from an iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • What is the best way to run windows on my Mac? And What are the pitfalls I should watch for?

    What is the best way to run windows on my Mac?   What are the pitfalls/

    If you need Windows as your main operating system you would be better off buying a Real Windows PC.
    Running windows on a Mac is always a compromise. Whether in a Boot Camp partition or in a Virtual Machine.
    In boot camp you can't easily Re-Partition and or Re-Size the drive it is installed on. You can't use both graphics cards as Apple has limited Windows to use the discrete graphics only, that is if your mac has 2 graphics cards (15" MBPs), which will shorten the battery run time in Windows.
    The trackpad only has limited functions in Windows, less then is available on the Mac side and a real Windows PC.

  • Custom tables create in Apps schema ( What are the problems with this?)wwww

    Hello all,
    I'm a dba in a new environment where a number of custom schemas are being created in the apps schema. I know this is not considered Oracle's best practice and I would like to make some recommendations for a change. Before doing so, I would like to know the problems that are associated with custom tables living in the apps schema. We are currently on 11.5.10.2 on AIX. Also, if someone can point me to any "Official" customization standard or Oracle documention where I can backup my case it would be greatly appreciated.
    Thanks in advance,

    Hi,
    Please see this thread.
    Custom application implemented in E-bussiness Suite
    Re: Custom application implemented in E-bussiness Suite
    Regards,
    Hussein

  • What are the logical database source (SQVI) should i use for quick viewer

    Dear expert,
    Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of   and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Please help.
    Many Thanks.
    Regards,
    Karen

    Hi,
    Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
    How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
    Between,do you have any reference/link/document on the how to use the SQV1?
    Also, what the difference between SQV1 and SQ01 ?
    And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer  to generate the query?
    Please help.
    Many thanks.
    KH

  • Apple TV: what are the specific settings I should adjust to?

    Hi, there
    I really need your help now. I use a DVD ripper to rip DVD to MP4 for Apple TV. I am trying to achieve quality that is close to a movie (m4v) from iTunes. What are the best settings to get this type of quality? I am not concerned with output file size, and I just want to get the very best quality I can. If so, what are the specific settings I should adjust to? The program I am using allows me to adjust video and audio parameters as below:
    Video parameters:
    Codec: h.264
    Resolution: 1280*720
    Bit rate: ??? (it is said Up to 5 Mbps, but what is the specific bit rate?)
    Frame rate: 24 fps
    Audio parameters:
    Codec: aac
    Sample rate: ???
    Bit rate: ??? it is said 16 to 320 Kbps, but what’s the specific figure?
    Audio channel: mono, stereo and 5.1 channel, which one should I choose?
    Following are the tech specifications I copied from Apple’s official website:
    Video formats supported
    H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
    iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
    MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
    Audio formats supported
    AAC (16 to 320 Kbps); protected AAC (from iTunes Store); MP3 (16 to 320 Kbps); MP3 VBR; Apple Lossless; AIFF; WAV; Dolby Digital 5.1 surround sound pass-through
    And I have selected some parameters according to this, please see the above contents, but there is no info about specific video/audio bit rate, audio sample rate, and audio channel. I just wanna know if I want to watch the movie on my 1920×1080 TV, what are the specific settings I should adjust to?
    Any suggestion is appreciated. Thanks in advance.

    Well, then how about playback Apple TV uncompatible video files? I have some other video files(such as avi, mkv,not DVD), and I also have a video converter, i know i can convert them to m4v, mp4, or mov that supported by ATV,but the thing is that i still don't know the best specific settings for conversion. Any suggestion? Many thanks for your kind reply.

  • What are the tables Oracle EBS connector can connect to?

    Hello,
    Requirement
    As part of the project requirement for Oracle EBS application, we have the concept of BUYER account (PO_AGENTS) and Supplier account (PO_VENDORS). When the account has to be disabled from FND_USER and HR foundation table, the account has to be disabled (or removed based on the requirement) from all linked tables "PO_VENDORS" and "PO_AGENTS".
    Questions
    1) Does the out of the box Oracle EBS connector handles removing users from the tables "PO_AGENTS" and "PO_VENDORS" apart from "FND_Users" and "HR foundation" table?
    2) If no, what are the recommendations for achieving the above requirement?
    Thank You!

    No, OOTB the connector will not revoke the user entry from tables like PO_AGENTS etc .. You can customize the connector to do that .
    Explore the stored procedure which can revoke entries from the mentioned tables and wire it via a adapter .
    Regards
    Suren

  • What are the newest books available from Sun?

    Hi, I was just wondering what are the newest editions of books that are available from this site specifically and the developers of Java.
    I was looking at the shop from this site just, but all of the editions of books seem to be old compared to those that I have found on Amazon.
    Specifically I was looking for books endorsed by Sun themselves, I think I saw two in particular which are:-
    The Java Programming Language (Fourth Edition is latest I see) by Ken Arnold, James Gosling, and David Holmes
    Effective Java, Programming Language Guide (Second Edition) by Joshua Bloch
    Are there any other books like this which are written by the Java developers or listed as Effective Java was in the trails (and what are the newest versions)? Thanks.

    What's the sudden requirement that the books be from Sun? I've found that books from O'Reilly and APress are often better than those from Sun. For beginners, the O'Reilly "Head First" series is one of the best and the easiest to read.

  • What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

    In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
    Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
    While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
    can give the information about the below questions
    whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
    and  what are the better load/performance tools available for Flex Remote Objects?

    Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common.  Just make sure they are thread safe ("var" or local.* all your method variables).
    You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently).  They have mechanisms for handling and caching singletons.  Then you wouldn't have to go to the application scope to get your CFC instances.
    -Carl V.

  • What are the Tables effected after shipping done

    Hi all,
    What are ALL the tables will be effected when the oe_order_lines_all.flow_status_code=shipped confirm ?
    And what are the main shipping tables ?
    Thanks in advance

    Wsh_delivery_details
    Wsh_new_deliveries
    Wsh_freight_costs if you have freight
    Oe_order_lines_all
    oe_price_adjustments
    Wf_item_activity_statuses
    Mtl_material_transactions if the item is inventory transactable item
    Mtl_transaction_lot_numbers if you lots
    Mtl_unit_transaction if you have serial numbers
    Mtl_serial_numbers if serial controlled
    And many more depending on how many applications you have.
    Thanks
    Nagamohan

  • If we open a transaction i need to find what are the tables used

    hi gurus
    can anyone suggest me
    if we open a transaction  liek va01
    i need to find what are the tables used
    what are the fields used in that transaction
    i need a list .
    thanks&regards
    kals.

    Hi
    you can find all those details in transaction variant,
    go with SHD0 ( numerical 0) and then enter your transaction code and enter transaction variant name and then select that
    Select the program SAPMV45A and go CHANGE WITH PROCESSING (F6),
    there you can find the list of fields and field names.
    reward points if usful.
    thanks and regards,
    muralidhar

  • Tables: CATSDB & AFRU - How are they filled and what are there purposes?

    Hi,
    In regards to tables CATSDB & AFRU, how are they filled (interfaces, programs) and what are the purposes of these tables?
    I found the interface IF_EX_CATSBW_CUST_ISOURCE for table CATSDB but is this how CATSDB is filled? How about AFRU?
    Please help.
    Thanks,
    John

    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/19/8d38689bfd11d38ea50000e81de309/frameset.htm">CATSDB</a> is usually filled via Time Entry (CAT2) or a BAPI call.
    Arya

Maybe you are looking for