AVCHD - Iphoto does not import videos taken with Panasonic DMC-TZ7

Hi,
I come from the Iphoto forum in which I was told that if Quicktime can support AVCHD format, then I can import the videos taken with my camera (Panasonic DMC-TZ7 making ACVHD lite) directly into my Iphoto library. I found that easy to be able to look at all pictures and videos in the same library/software.
Do you know when quicktime is supposed to be updated ?
Regards,

Thanks for this very quick answer.
Do you have any idea when this format is supposed to be supported by Iphoto : until now I found so nice to be able to have in my Iphoto library both pictures and videos...
I am quite new to Mac and being obliged to use two softwares for "the same" purpose make me feel like going back to the PC universe !
Regards,
Jerome

Similar Messages

  • IPhoto does not import video from iPhone 4

    We've been battling this problem for a while now. We have two iPhone 4's and any time we import photos to iPhoto, we have to select photos individually, making sure to NOT select any videos taken with the iPhone 4, in order to get them to import to iPhoto. If there is a video in the set, all photos after that are reported as unrecognized format and won't import. We can then select those photos that didn't import and reimport them and it works. Importing videos, either single videos or groups, or when mixed in with photos just doesn't work. Every time it fails with the unrecognized format error. We are able to import directly from a flip video camera, or if we first transfer the videos from the iphone to the hard drive using a different utility, but when we then import those files into iPhoto, they come in, but without the usual thumbnail image (they show up in the library as black).
    This problem has been going on since iPhoto 09. We bought the 11 upgrade hoping it would fix this problem. It made it a little better (we used to not be able to import anything from the phones), but it still doesn't work for video. If it were just one of the phones I'd say it was the phone, but both phones have the problem. We've been seeing this problem for many months now.

    Believe me, we've tried it all. Resetting, restarting, reinstalling, clearing preferences, caches, resetting databases, removing all photos off the iPhone and starting from zero. I've read probably 15 different threads on the subject and tried at least as many solutions. In a few instances the problem got better...for 1 sync. Then it cropped up again. I tried syncing to a fresh iPhoto database, and the problem came back for that one as well. I'm really hoping that Apple is working on a solution for this. We've put a lot of effort into our iPhoto archives and the main reason we bought the iPhone's was for the camera (even suffering through AT&T's questionable coverage for it). It doesn't seem like we are the only ones having this trouble.

  • My iMovie on my 2011 iMac does not recognize video taken on my new iPad, is there a way to resolve this?  I would like to take movies on my iPad and make movies in iMovie on my iMac.

    My iMovie on my 2011 iMac does not recognized videos taken on my new iPad.  Is there a way to correct this, or perhaps I am doing something incorrect.  When I connected my iPad to my iMac, iPhoto popped up, but not iMovie.

    You have to import the movie into iTunes via iOS file sharing, then drag the movie from the file sharing window in iTunes to the desktop, then you can import the movie into iMovie. Here are the details.
    http://support.apple.com/kb/HT4792

  • Aperture Does Not Import Videos using IMPORT FOLDER AS PROJECTS

    SOLVED - Aperture 3.2.1 does not import videos using "Import Folder as Project"
    After 2 days of trying to figure this out (actually around 2 hours total) I've finally managed to import all my photos & videos last year. 200 Gigs 54,000 files. First few tries resulted with referenced photos only, no videos. I had no luck with Google, even tried moving a couple of .plist as mentioned from this thread: https://discussions.apple.com/message/11188017?messageID=11188017#11188017 - this worked for some but not for me. Some issues were solved by NOT selecting "Raw Only", this will cause Aperture to skip your videos.
    Thank you to these people who took time to share. In return I am posting my micro contribution to the Aperture Community. FILE > SWITCH TO LIBRARY > then create a new library. You should be able to import your photos with videos in folders.
    I hope this gets into Google soon. :-)

    , I see only the file, where these photos are, not the photo names or thumbs inside the file (Aperture import path).
    You mean in the Aperture Import panel the folder, where the jpegs should be, is empty?
    Then you may have excluded jpegs from import in your "Import Settings".
    Check the above settings in the "Import Settings" options in the "Import Window". I.e-make sure the Raw+Jpeg Pairs option is set to "Both", even if you do not import raws.
    After reassembled all the programs to a new hard drive in Mac Pro
    Is this new Harddrive your system volume? And are the jpegs you wat to import located on this drive? Or are the on another external volume? If yes, how is this volume formatted?
    Have you checked the permissions and ownership of the jpegs?

  • IPhoto does NOT import " .pictClipping " files ?

    Hi,
    I copied pictures of artists from Amazon on the Web and put them together with the songs in iTunes Artwork. So far so good.
    I wanted to import these pics in iPhoto. I dragged them on the desktop en tried to import them via iPhoto 'Add to library'.
    Didn't work. iPhoto does NOT import " .pictClipping " files.
    What did I do wrong ? What can I do ?
    How can I get these pics in iPhoto ?
    Thanks for some light in my darkness...
    John
    Macmini G4   Mac OS X (10.4.3)   Maxtor 300 Gb HD
    Macmini G4   Mac OS X (10.4.3)   Maxtor 300 Gb HD

    Hi JOhn,
    Dragging the album cover out of iTunes either by the album art window or by the "get info" window will just give you a clipping file that cannot be opened by a graphic program. It is just a clipping that Finder will open.
    Did you download the images from Amazon and save them to your hard drive, or did you copy/paste them from Amazon to iTunes song "get info" window?
    If you just did a copy.paste, then I suggest you go back to Amazon and download the images to your hard drive. then import into iPhoto. There might be some third party programs that will download the art while your songs are playing on iTunes to make it easier for you. they usually put them on a folder on your hard drive somewhere.
    there's even an Applescript program to export your artwork from iTunes and copy it to an image file at a specified location.
    http://www.versiontracker.com/dyn/moreinfo/macosx/19567
    There are all kinds of ways of doing this so search around Version Tracker for "itunes album art" for other programs to make it easier for you.
    Lori

  • Iphoto does not import all items from camera

    I have been importing photos into Iphoto from my canon SD300. I have noticed that on occaissions it has skipped a few files while importing. In particular it has skipped movie clips. When the camera is connected Iphoto says it is ready to import and tells you the number of images and movie clips, and it recognizes all of them. However, once the import function is over on the last occaision I noticed that two clips and one image was not imported. I manage to get the missed image/clips by inserting the memeroy card in a card reader and dragging the missed image/movie clips into Iphoto.
    I would appreciate if any one knows why Iphoto does not import all the items from the camera even though it recognizes that they exist and how I should fix this problem.
    Thanks.

    Hi imac2,
    I don't know why iPhoto skips some of your files. I can tell you that I use Image Capture to download my images and video clips. My video clips from my Canon can get quite large (over 1010 mg). iPhoto can import smaller clips that digital camera made, but now a lot of the newer camera can create very large video clips and I don't think iPhoto can handle importing them.
    Once I download my images and video clips I put them in dated folders. This makes it much easier to back up the video clips and images. I then import the folders of images into iPhoto. I like having more control.
    Lori

  • When I import videos taken with my iPhone 4S to my Windows PC some of the landscape videos are upside down and all of the portrait videos are rotated 90 degrees.  It makes a difference depending how I hold the iPhone when taking videos.  Help!!!

    When I import videos taken with my iPhone 4S to my Windows PC, some of the landscape videos are upside down and all of the portrait videos are rotated 90 degrees.  It makes a difference depending on what position I hold the Iphone when taking videos.  Help!!!!

    Sometimes syncing will have problems with very large video files like this.  I'm not sure you will be able to overcome this, but if the videos are important enough you may consider purchasing 3rd party software such as Touch Copy to transfer them.

  • Ovi Suite 3.0.0.290 Can not play Video taken with ...

    It is quite amazing that software by Nokia can not replay Video taken with phone by Nokia.
    VLC player plays the video OK so the video (MP4) looks to be all right.
    All thet Ovi says is that the video can not play. Format may not be supported .

    I have the same problem, in that I can't get my video's recorded on the phone to play.  If I try to double-click and play within Ovi Suite it crashes Ovi Suite, if I open Windows Media Player and try and run it then WMP crashes too (is Ovi Suite using WMO under the skin?) and the best I can get is when I try it with QuickTime I get sound from it but just  black screen for the video.
    So yes, I suspect it's a problem on my PC but can anyone give ideas on how to fix it?
    Running Windows XP, SP3

  • Iphoto does not import pictures or detect them.

    Hi, we have a tutoring program where I work and we wanted to use apple's "fixup" pictures in the class. To make the experience more realistic for the users, we plan on putting the pictures onto memory card readers (with memory cards already in them). We would like to recreate putting the memory card readers into the computers and importing from iphoto. The memory card readers are: Multi Flash Media Reader.
    We first tried to make a folder called DCIM for iphoto to recognize when we open up iphoto. When we had this initially setup iphoto would recognize if you put ONE photo into the folder at a time (From the computer to removable disk). However when we put in multiple pictures (say all of the pictures from the "Cayman Trip") iphoto came up with an error stating that basically that it could not recognize the photo type. When we looked at the name of the file paths however, it was not the file path that we had set up. Unfortunately I can't recreate the error right now because we have reformatted the photo disk in hopes that that would resolve the issue.
    Now that we have reformatted we have recreated the DCIM Folder, and now Iphoto will not detect the photos in the folder at all.
    Any help would be appreciated.

    Do you have a camera that you could use to reformat the card, take a few shots and then replace those files with your jpgs? See if that would clean up the path and recognition.
    However, you might want to teach the students to import the photos manually into iPhoto as that's a safer way of doing it, particularly if you're coming direct from a camera. That saves wear and tear on the camera and battery and avoids possible shutdown of the camera due to low battery in the middle of an import. That can damage a library. Also never have iPhoto erase the memory card after import as there have been too many reports of incomplete or no import and complete erasures.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • IPhoto 9.3.2 does not import video. Mountain lion

    Hello,
    When I try to import video to iPhoto It says "the following file could not be imported. The file is an unrecognized format."
    This happens with iphone or sony camera video. Quick time play bouth of the videos. Start to happen after mountain lion upgrade.
    Any help will be great.
    Thanks a lot, Allan

    Well this is the cause of your problem then:
    I use the library in a NAS with SMB protocol
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
    So this problem - and others - will pop up with increasing regularity as time goes on.
    So, move the Library to an appropriately formatted disk. See if the videos will import then. If not then
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • Why does iMovie not recognize video taken with my iPhone that is in Aperture

    Since "upgrading" (not sure that is a good term for this project) to Lion, I am unable to see or import .mov files taken with my iPhone, on a Mac using Aperture and iMovie. I uninstalled 3ivX and now can see them in iPhoto and Aperture but when I try to import them into iMovie you cannot see them in the media browser.

    You have to import the movie into iTunes via iOS file sharing, then drag the movie from the file sharing window in iTunes to the desktop, then you can import the movie into iMovie. Here are the details.
    http://support.apple.com/kb/HT4792

  • Iphoto does not recognize video files when the iphoto library is on an external drive

    I have copied my iphoto library to an external hard drive. I pointed iPhoto to the new location. I can import photos with no problem, but when I try to import video files (from my iPhone or from another drive) I get a message that the file is not recognized. When I moved the iphoto library back to the MAC hard drive, the import works OK both for photos and videos.
    I am using iphoto 11 and all the videos were taken with my iphone.
    Any ideas?

    Video could be imported from an iPhone before the library was copied to an external drive.
    The video that was imported before the library was moved could be read before and after the library was moved to an external drive.
    Video from the same iPhone cannot be imported into the library once the library had moved ton an external drive.
    The problem is that video can no longer be imported into the library that was moved to an external drive. Photos from the same iPhone can be imported and read.

  • Aperture 3 does not import video from iPhone

    Aperture 3 does not want to import my videos from iPhone anymore. This used to work perfectly fine before, now Aperture hangs as soon as I try to upload any video.
    Is this a known bug??

    I'm experiencing the similar but Aperture not importing photos from iPhone. When I go to iPhoto and import then it works. My software is all latest.

  • Select only photo to import in iPhoto, do not import video

    I use my Sony camcorder to record video and also to take photos.
    In iPhoto I would like to import only my photos, but not my videos. I use a different application for my hd video.
    But in iPhoto import windows it's not possible to select automatically "only the photo".
    The only alternative is to select manually each photo ... What is painful with a lot of new photos and video!
    Any solution ?

    Why is it private?
    THat is not an iPhoto issue - you need to contact support for your camera for questions on wy they do things - even on iPhoto we are users just like you and do not know why things are - we help you use what is
    And do you recommend importing directly from the finder to a folder on my external drive to keep for back up and then copying into iPhoto/Aperture?
    That is a personal choice - I see no use in it and prefer having a great backup system for everything on my computer (I run Time Machine and do a daily bootable clone - plus an occasional off site backup - and do not erase my SD cards for a year or more)
    Perhaps I should have started another post
    Yes
    LN

  • IPhoto does not import from iPhone

    I can not import my iPhone pics anymore. Even when the phone is not attached to the iMAC iPhoto shows "Arthur's iPhone" on the left of the screen. On the right side I see 213 empty pictures although I have deleted everything from my iPhone. With empty I mean thesquare of the picture is there but no image in it.
    On my wife's powerbook no problems with the same iPhone.
    Can i reset iPhoto or re-install it ?

    Welcome to the Apple Discussions.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

Maybe you are looking for

  • How to print global variable in smart form table cell

    hi, i have smartform and i insert table in it, i also have set global variable, i want to show variable in table cell. regards shahid rais

  • Is there an easier way to draw a shape in 3d to match X,Y, Z of photo?

    I usually start a project in 2d and import photos, draw shapes and text in this 2d environment. I find it easier this way because they all start out on the same plane, and when manipulating in 3d later, this initial plane acts as a reference plane th

  • [SOLVDED]makepkg not wokking and [error: failed to commit transaction]

    I had some problems with the liblzma.so.5, so I update the xz library, and it worked -the problem was with R, the statistic program- pacman -S xz After that, I tried to install some AUR programs, and got this error with the libzma.so.0. I read  this

  • Somethings wrong with ARD 3.1 on Intel Powerbook

    I have ARD 3.1 installed on a Intel Powerbook for when I travel and on a Desktop G5. Everything works great on G5. ARD displays name, current status (eg offline, idle, available) current apps get displayed, current users are displayed, IP addresses a

  • Windows open without clicking on them

    In the past few weeks, I've had windows open on my Powerbook G4 without clicking on them. I'll leave the mouse pointer sitting on a file and it will suddenly open. As well, I'll be typing and the cursor will jump to another spot on the page and input