Average delivery time for MacBooks to Europe.

I've read quite a few posts (and written a couple myself) where people complain about TNT's delivery times. Now, being sick at home and waiting for my MacBook to make it out of China I was wondering:
If you live in Europe and have already received your MacBook, how many days did you have to wait from ordering it and actually receiving it?

27 May 2006 09:51 Northampton Hub Consignment Received At Transit Point
26 May 2006 15:21 Arnhem Hub Consignment Received At Transit Point
23 May 2006 00:41 Suzhou Shipped From Originating Depot
22 May 2006 05:23 Suzhou Consignment Received At
Transit Point
its due tomorrow and i had extra gig of ram and more hdd space
so lets see

Similar Messages

Current Delivery Times for MacBook Pro 15"?

What can i expect the delivery time to New York to be with a 256gb SSD and 8gb of RAM and anti-glare screen?

After you configure your laptop on the apple store, when you choose your shipping preferences it will show you an estimate.

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?
As of today feb 15 i have been waiting for 78 days. Finland doesn't have an official apple store (only authorized resellers) It was my mistake because i should have bought from apple.com. But i think 2.5 months is too long and i have no information about when i can get it..

The low-end 15” rMBP with a 8 GB or RAM and a 256 GB SSD costs $2,000.
The low-end 15” rMBP with a 8 GB or RAM and a 512 GB SSD costs $2,300.
With 16 GB of RAM and a 512 GB SSD it costs $2,500.
The high-end 15” rMBP with a 16 GB of RAM and a 512 GB SSD costs $2,600.
All cost $500 dollars more with a 1 TB SSD.
So the SSD size is not a differentiating factor unless you prefer 256 GB.
If you think you need 16 GB of RAM and a 512 GB SSD then you might as well spend the extra $100 for the high-end model.
The high-end model will make a difference on gaming and graphics-oriented applications.
They tend to run other applications at about the same speed.
Both models are rated with 8 hours of battery life.
Benchmarks on PhotoShop comparing memory sizes: https://discussions.apple.com/thread/5659174?tstart=30
The speed was about 10% different between 8 GB and 16 GB models.
On other applications your mileage may vary.
Application benchmarks:
http://www.macworld.com/article/2059215/15-inch-retina-macbook-pro-review-a-tale -of-two-laptops.html
The low-end and high-end performed the about the same on non-graphics oriented applications.
Graphics oriented benchmarks:
On the Cinebench OpenGL benchmark the high-end was about twice as fast.
On the Unigine Heaven Benchmark benchmark they ran at about the same speed.
On the Unigine Valley Benchmark benchmark the high-end was about 1.5x as fast.
Message was edited by: hands4

Prolonged delivery times for SSDs

Why does the delivery time for BTO iMacs specced with SSDs bump up from a few days to 4-6 weeks?

Given that it's only the SSD option that increases the lead time that much, it looks like Apple don't have enough SSDs on hand at the moment to predict a shorter delivery time, so they're managing expectations.

UK delivery times for photbooks?

Hi
Can anyone give me an idea, based on experience,
of delivery times for photobooks ordered from the UK?
I noticed that when you order, it says international orders dispatched in 2 working days, which made me think they are coming from the USA and might take a long time to arrive.
I'm working on a photobook for my brother's 50th birthday on 13 May, and it's important that I get it in time.
Thanks

Well in the end I used photobox instead and they did a fantastic job. Hardback book came with a cut-out in the cover, like the iphoto ones, but was cheaper.I ordered on a Sunday, and the book was despatched the following day - a bank holiday! - and arrived on the Wednesday.

Contract - Plant Conditions - Different delivery times for plant

Hi people,
I have a question about contracts , in transaction ME32K.
I enter a Contract number
Edit -> Plant Conditions menu.
Select a plant and I can enter a different Net Price for each item for this plant. How can I enter "Planned Delivery Time" for each item for this plant?
In this case, the vendor has different delivery times for each plant and I cannot enter this information.
Do you know if it is possible?
Thanks a lot!

Hi,
The basic requirement is for the trading of material which is imported and for the material which are purchase locally there should be different invoice for such materials, but while creating the sales order we have only one sales order including all types of materials so in such case we want to create different delivery challans so that different invoice can be made easily or only twi invoice for one delivery challan.
regards,
zafar

ISA Server 2006 + Average response time for Non Cached requests = performance issues?!?!?!

All,
I am in a predicament with internet browsing speeds...We have a 3rd party look after our line and internet facing f/w so I cant troubleshoot them, so at the moment Im looking at ISA as the potential bottleneck - we have a fairly standard environment:
Internal > Local Host > Perimiter n/work > Firewall > Internet
I have been running custom reports on the ISA server to see what data can be collected - I have noticed that "Average response time for non cached requests" (traffic by time of day) can be as high as 76 seconds!!!!!! Cached hits are between .5
and 2 seconds.
I have also coonfigured a connectivity verifier which is also flagging slow connectivity, massively over the >5000ms and also reporting "cant resolve server name on occassions- and this is configured for
www.Microsoft.com --- DNS ???!?!, however I have looked through DNS (no obvious errors / config issues) which I can see
I have run the BPA on ISA server to ensure its Health - - connectivity verifier errors flagged timeouts to microsoft.com as expected...
Can anyone advise any obvious areas to investigate as Im struggling! - as always the 3rd party have told us the internet pipe is fine :O

Problem resolved.
DNS forwarders have been changed on the ISA server / DNS and this has improved lookup speed considerably.
thanks all :)

Can Cisco Historical Reports Report Average Hold Time for Incoming Calls?

Is the a way that Cisco Historical can report on the Average Hold Time for Incoming Calls? User is trying to figure out if there is a hold time prior to the agent picking up the call.
I am running CRS Historical Reports Versions 5.0 (2.5).

Hi,
You can check the link belowCisco Unified Contact Center Express 5.0 Historical Reporting Administrator and Developer Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_5_0/programming/hr_admin_devp/crs501hd.pdf
this document includes all the details regarding the reports and its cutomization.
Regards,
Trad

I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion

I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion and on both my MacPro and my wife's Imac. I also see my mailboxes randomly disconnecting and reconnecting. Any other ideas of a possible cause?

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

Average Render Times for HDV? 1 1/2 minute takes 30 minutes

Hello everyone.
I was curious if anyone has heavy experience with HDV render times or have a good resource to get average render times for HDV so I can make sure my times are close to everyone elses. I know HDV has a different GOP structure which makes render times longer, but it just seems to take for ever.
I have a Dual 3GHz Qaud-Core MacPro with 5GB RAM using Compressor 3.
1 1/2 minutes from FCP 6:
Preset 90min high quality DVD MPG 2- takes 30 minutes
Preset M4V for iPod/iPhone - takes 40 minutes
Any knowledge or resources would be much appreciated.
Thanks,
Deuce

To be honest, neither of your planned "upgrades" would improve performance all that much because you have too few drives and you will still have too little RAM. Premiere Pro CS5 still needs more than 12GB of RAM just to perform at its best. In addition, two drives (in your planned upgrade case, one SSD and one HDD) barely meet Adobe's stated minimum system requirements; Adobe strongly recommends more than three separate drives. (In your case, you'd need at least four completely matched hard drives in two (R)AID 0 arrays, with each matched pair in one array, in addition to the SSD.) And current AMD x4 CPU-based systems perform at least three to four times slower than a fast Intel-based system because the AMD CPUs do not fully support the SSE 4.x extensions that Adobe makes heavy use of.
As currently configured, you have a system that's at least 8 to 10 times slower than a fast, properly tuned Intel-based system. And even after you perform the so-called "AMD upgrade", your upgraded system will still be six to eight times slower than a fast mid-priced Intel-based system. And all that is due to the fact that you'd still have only two drives and too little RAM (IIRC you'd still have only 4GB of RAM and only a single hard drive for everything except the OS and programs even after the AMD-based "upgrade").

Average startup time for 2012 MBP with ML?

I recently bought a brand new 13" mbp (i5 2.5ghz, 4gb ram, 500gb 5400rpm). After installing some apps and updating mountian lion from 10.8 to 10.8.2, startup is much slower now and takes around 45 sec (time period from powering on the mbp to login screen). Also apps are launching slower now. Startup was taking less than its half before updating the mac os. Is there any way to improve the startup time? What is an average boot time for similar mbp?

I ordered mine on May 17, it was shipped from the factory May 24 (China) and delivered to my door the morning of May 25 (time zones and a date line account for the fast enroute time. I ordered the 7200rpm drive, 2gb RAM & glossy screen.
So far, absolutely no problems, the unit works perfectly.

"Real" delivery times for iPhone 4 in HK ?

Hi there,
my iPhone got stolen today, but incidentally, a while ago, I had ordered an iPhone for a friend who won't be back for another 4 weeks, and this one arrived today. So I am contemplating to use this one for myself and ordering a new one for him.
So that's what I did, ordered a new one and got told by Apple that the delivery will be in almost 6 weeks (25/11) which would be too late.
But for the one I received today, they originally told me as well that it would take 6 weeks (11/11), but eventually, I received it in 2 weeks.
Before breaking the package, it would be good to get some feedback what delivery times people are experiencing when ordering iPhone4 in HK (of course, living here as well).
Thanks a lot, Nick

Is there not an O2/T-Mobile/Orange/Vodafone/3UK/Carphone Warehouse/Phones4U shop nearer to you or have you pre-ordered from Apple and need to pick-up?
Last year I finished work, travelled back from Bristol to Gloucester, walked into the O2 shop and didn't have to queue for a minute to get my 3GS.
mrtotes
Message was edited by: mrtotes: forgot T-Mobile and tag

Delivery times for iwatch

I Have recently ordered a new iwatch on 12/04/2015 obviously I wasn't expecting delivery on the 24/04/2025 but was a little shocked that delivery is now estimated
for the month of June. I then started to get buyers remorse and was contampating cancelling my order online - I've now changed my mind having visited an apple shop today successfully booking an appointment whilst in store meant only a five minute wait to try one on.
It is absolutely brilliant and can't wait for mine to arrive.
what do you think the chances are of my delivery time coming forward?

As someone is sure to point out, we are all users like yourself - not Apple employees - so it is just guesses on our parts. However I have recently read several articles that implied (either through their own guesswork or actual sources in Apple) that a lot of those June delivery dates are probably going to be earlier than originally estimated.

Regarding planned delivery time for Subcontracting process

1.Factory calender is maintained and assigned to the plant,SUNDAY is
not working day for Client,so the system is not planning any internal
activities for SUNDAY,up to here it is fine.
2.One semi finished material is produced by vendor.i.e.Sub contracting
process, it takes 2 days to complete.For vendor SUNDAY is not a
working day.
3.Planned delivery time is maintained as 2 days ,so that if PO is
release on MONDAY ,the delivery date on WEDNESDAY.
4.If requirement is on MONDAY ,In MRP Run System is generating the
release date on SATURDAY and delivery date on MONDAY,here system is
taking the calender days not the factory calender days,Client is
asking for correct delivery date.
5.Is there any way to tell the system that SUNDAY is not working day
for vendor,so that system will generate the release date on FRIDAY
and delivery date on MONDAY.
Please give your valuable inputs.

Hi
the following link might help you in setting the planned delivery time in your defined calendar, rather than the general calendar days.
SAP ERP Manufacturing - Production Planning (SAP PP)

How can consider Planned delivery time for subcontracting dependent of qty

Dear guru ,
How can mrp schedule delivery date of a subcontracting purchase requisition in order to consider planned delivery time and quantity to purchase.
Thanks

dear guru ,
I want to create a self-defined info structure similar to S013.
I want to add field purchasing group from EKKO-EKGRP. The other fields are similar to S013 with the same rules.
What do you suggest i can do consider note 397864 :
You are not permitted :a) to use info structure S013 as a template for self-defined info structures (This is prevented as of Release 4.5 due to a termination message).b) to create any update rules for S013 with a self-defined update group.c) to include the enhanced update rules that are used for S013 during the definition of key figure updating into the definition of the update of a self-defined info structure (compute...).
Thanks

Average delivery time for MacBooks to Europe.

Similar Messages

Maybe you are looking for