Avi files & playing videos off internet

what plugin do i need to download/play to avi files.
I downloaded real player but i hate it. Anyone got any better?

[Perian codecs for Quicktime|http://www.perian.org] - plugins to add functionality to Quicktime for playing additional audio and video formats
[Quicktime audio problems, Perian, VLC|http://discussions.apple.com/message.jspa?messageID=9013669] - read note about uninstalling prior DIVX support before installing Perian.

Similar Messages

  • AVI File Playing video but not audio!

    Hey guys I am terribly sorry if this has already been discussed before but I am really getting aggrevated here. When I show the format it says : Generic MPEG-4, 624 x 352, Unknown
    MPEG Layer 3, Stereo, 48.000 kHz
    Anyone know a codec? I have downloaded everything I have seen that might be a codec and it's kind of scary that none have worked yet. The video is perfect but i hear nothing!

    See the following...
    http://insanityflows.net/archive/index.php?title=QuickTime#Nosound_inQuickTime

  • My imported avi file plays in slow motion and staggers. what do i need to do to correct ?

    My imported avi file plays in slow motion and staggers. How do i fix this ? I am newbie, just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second

    You can update the latest drivers for Nvidia Card.
    Try to run composition panel at a lower resolution .
    Refer to this link .

  • Avi files play audio no video

    I have a newly installed CS5 on a newly built pc (MB = MSI-X58A-G065, 12 GB RAM, CPU = i7-950 QC, 3.06GHz, Graphics Card = MS-N460GTX-HAWK, 14 TB hard drives on Raid0 and Raid1)
    I have hundreds of hours of footage that are on external hard drives (edited and original files) that are .avi files. The breakout box on the computer that was used for digitising is a Canopus DV Rx realtime  When I place these .avi files on a CS5 (DVpal sequence settings) timeline, they play back audio with green video. I have checked (using GSpot) that the requisite codecs are installed and they are. I have tried importing files in Adobe Media Encoder and converting/exporting them as uncompressed .avi and .mov files. No joy - still green. I searched Canopus and this perhaps has something to do with Canopus being a 32 bit codec and CS5 being 64bit. I am now planning to install CS4 and use this for all my dvpal footage and use CS5 for editing HD and any new DVpal footage. This is not the ideal workflow solution. Does anybody have any conversion or other suggestions?
    Thanks

    You probably do need 64-bit codecs, as I'm assuming these are Canopus HQ files. A quick search suggested that those were only available with Edius 6; if you have that, the dongle in place, and Premiere Pro CS5 concurrently installed, you can decode the files.
    But, let's make sure that that's indeed the case: grab MediaInfo and run one of the files through in Text view. Copy and paste the report here.

  • 2048 error when trying to play videos off network attached storage

    Here is the problem, when i try and play my converted mp4 videos off my nas box i get the error-2048(not a file quicktime understands) but if i copy these files to my computer they play without a problem. I am totally stumped with this problem and will love to no what is causing this and is there a way to fix this problem.

    Had the same issue and found this information.  Just tested and it worked for me. Hopfully helps some else also!
    Answer: Change your DNS setting in the iPhone/iPad Wi-Fi settings.
    That worked for me. My original DNS settings were assigned by my WIFI router a. I removed these and placed in: 208.67.222.222 (Open DNS server IP)
    To make this adjustment go to Wi-Fi, locate your selected Wi-Fi network and click the blue arrow beside it to being up advanced settings, click in the DNS area to change it.
    To read the original thread, follow this link: (answer on page 2)
    https://discussions.apple.com/thread/3400114?start=0&tstart=0

  • Imported AVI files getting cut off

    I'm trying to import an avi file into my captivate project
    and it seems to be getting cut off. When I use the slidebar the avi
    plays completely but when I do a preview or a publish it cuts off
    about 8 seconds of the avi. Can anyone help? I've tryed this with a
    few different avi files and the same thing happens. Your help is
    greatly appreciated.

    The default slide time for a Captivate project varies
    depending on version and preference settings - but it sounds like
    all you really have to do is extend the time-to-play for the AVI
    object on the time-line (thus also extending the slide display time
    itself), to allow the converted AVI enough time to open and
    complete its play.
    This will have to be a trial and error, probably, because the
    time isn't displayed for the converted animation.
    Welcome to the Captivate User Community, foutjo77.
    .

  • CS4 premiere Imported .avi files play too fast

    Hi Guys
    I have a problem. I'm new to CS4 having used Adobe Premiere 6.0 in the past and I have never had this issue when importing .AVI files. What happens is that the file play fine in my windows enviroment and on all my players VLC,DIVX, Windows media player.
    But as soon as I import these files into my project at 29.97 frames the video plays really really fast and the sound plays at the normal rate. If I try to change the frame rate the sound also changes. Now here is the strange part. If I convert the files to MP4 they play fine! but the quailty of the video takes a massive hit as you know.
    I tried to convert the files to .MOV, MPG (which the program won't play) and most other types of video files but MP4 seems to be the only one that works! When I really want the higher quailty .AVI. Again the files play fine outside of CS4 Premiere and I have already converted them from a Panasonic AVCHD encode format.
    Please if anyone has any advise it would be great as I have to get this sorted for a x-mas present!
    Richard
    Running
    Windows Vista Ulimate
    4GB RAM
    Quad core Intel chip
    CS4 version 4.1.0

    First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of that link
    PS you are in the wrong forum http://forums.adobe.com/community/premiere/premierepro_current

  • Quicktime upgrade stopped avi files playing.

    Hi everyone.
    Having upgraded to Quicktime 7.1.2, I've noticed certain types of AVI files have stopped working - as in, Quicktime "quits unexpectedly".
    Has anyone else experienced this or managed to fix it?
    Thanks.

    Hi, shropshire_massiv.
    Are these AVI files that previously opened in QuickTime or new AVI files?
    AVI files are strange animals. It is a "container" format, but the actual CODECs used for the audio and video can vary widely and a file still be considered AVI. When QuickTime cannot play an AVI file, it is usually because of one of the CODECs in which the audio or video is encoded is not one supported by QuickTime.
    For complete information about viewing AVIs and DivX files on Mac OS X, including converting such to QuickTime, see my "Playing AVIs and DivX Files" FAQ.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Firefox will no longer play videos and keeps telling me to download the latest version of Adobe Flashplayer which I have done 5 times but still get the same message when I try to play videos. I can play videos on Internet Explorer and Google Chrome .

    Recently when I try to play a video on Firefox I get the same message that I need to download the latest version of Adobe Flash Player. At least 5 times I have downloaded Adobe Flash Player 11 Active X and Adobe Flash Player Plugin 64 bit. Problem is that even though I have the latest version I still get the same message when I try to watch videos on Firefox. The frustrating thing is I can watch videos on Internet Explorer and Google Chrome as well as on Safari. How does that make sense?
    Today, I upgraded to Firefox 10.0.2 (x86eng-us) hoping that would enable me to watch video on Firefox but it made no difference either. I would rather use Firefox as my default browser but if I can't get help so I can view video on it I will be forced to use another browser.

    Hi arpriltime,
    Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
    Hopefully this helps!

  • AVI files delete video component

    Hi... New problem. Pretty significant as it brings my current project to a stand still. I capture video files of my screen with "Debut". It is a trial version but I don't think that has anything to do with it. I get great video clips from it, one of which is attached. They are AVI files. When I import to Elements there is no video component, just the audio. It makes them an audio file in Elements.... Hmmm....

    garymanilow
    Please check out the following for the VLC Media Player download
    http://www.videolan.org/vlc/index.html
    A while back I looked at one of its version for conversion and was ready to throw it out the door. Hopefully the latest version will be helpful.
    So, we will be watching for your progress to guide us.
    The VLC player is a favorite for video playback of all kinds. Conversion part????
    You wrote
    [I downloaded the 'convertavitomp4' program and it worked. I have the video in the timeline, slightly blurry of course. Do you think chaging the wrapper would produce better quality or not?]
    At this point, not sure what that conversion program is, but check your project preset choice and make sure that you render the Timeline by pressing the Enter Key of the computer main keyboard to get the best possible view of the Timeline content...you could also just press the Render button above the Timeline. But if you have no colored line or a green line over the Timeline content, no rendering of the Timeline is possible. The rendering is to get the best possible preview of the Timeline AND non colored line or green line over the content means you already have the best possible preview.
    More later.
    ATR

  • Cannot play video on Internet (AT300-105)

    Hello,
    I was try to watch the video on Internet but without succes. Doesnt work. On You Tube works. Does anybody can give me the answer what I have to do? Thanks

    Hi
    Do you want to play videos using an internet browser?
    In such case you need to add the Flash application.
    As far as I know the Flash app isnt available in Google play store anymore.
    But this should not be a big problem. You can get it from most 3rd party pages. Just search for android flash app and you will get many hits on google page.
    You will need to check the option in Settings with allow you to install an app from external sources. I think this should solve your issue.

  • Problem with .avi files playing as video

    I'm trying to use photoshop elements 8 to make and burn a dvd movie, I've added the movie file in avi format and made the disc menu.When I try to play it back it looks all jumpy like its playing a slideshow of stills from my movie and not as a video. I'd apprieciate any help on fixing this if possible if not then oh well. I bought this program intending to this but I'm starting to think I can't...

    Expanding on what M.R. said, there is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
    If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. You can also give this player M.R. mentioned a try:
    http://www.videolan.org/vlc/
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the User Tips Library before you post a question.
    Regards.

  • Safari does not play video off web pages

    When ever I try to view a .mov, or mpeg, the viewer freezes on the first image, but the audio track continues to play. The movies play fine on other computers using QTP and Safari. Funny thing, is that in Safari, the movies do not play, yet they play fine on other computers, using Safari (1.3.2). The videos play fine on my computer, though only in Firefox. They play fine in iTunes, also.
    So, why is this happening? Quicktime app not playing movies, now Safari not playing movies from websites (movies I have made)? There has to be a connection.
    I have set up another user, and the problem still exists. I have tried reinstalling Quicktime, but problem still exists.

    Good you isolated the problem.
    I suggest removing the Quicktime components from your system (leave the codecs in the /Library/Quicktime folder alone), including the Quicktime Player in the applications folder and plug-ins from the Internet Plug-ins Folder. Leave the preference file alone as it contains your QT Pro registration info. Then reinstall QT. "repair permissions" after the install.
    Post back

  • AVI files play badly with no sound

    My system upgraded Quicktime to 7.5 and now I am having this problem. The only file I have is one my dead son made trying to get his infant son to talk. It is so special to me and his wife. I really want to get the sound working again. Thanks so much for any help.

    Ive been having the same problem... very frustrating, i know. I took a trip to China and now cant hear any of my videos. Depending on what type of files they are (mine display as AVI but they're mpeg1 files), you may need to convert them. If you google mpeg stream clip, then click on the first one that comes up, you can download that converter for free. I think the format you want to convert to is mpeg2. I havent had a chance to download the program yet, (it was just recommended by the Apple Care people) so that's as far as I can get you. Hope this helps.

  • Saving webcam video off internet

    This is really an OS9 question but i'm also wondering about OSX: does anyone have/know of a handy Applescript that will periodically (e.g. every 30 seconds) save a webcam's image to your local hard drive..? Preferably, this will happen without any hard disk usage as the program may be running for many hours or days at a time. I plan to capture to RAMdisk. I previously posted this question here:
    http://discussions.apple.com/thread.jspa?threadID=2520186&tstart=0
    Thanks!

    WELL, once again i've had to take off the gloves and solve my own problem. I post the result here for OS 9 users (Taylor henderson's script up above does nothing in OS9 except generate errors).
    The following script will capture a webcam image off the internet every 30 secs and save it to RAMdisk, with sequential filenaming, and with NO hard disk usage whatsoever for the duration. This is the first program i've written in a few years, and i have to say it's pretty slick, complete with error handling.
    set framenum to 10001 as integer
    repeat 10 times (* divided by 2 gives you number of minutes you'll capture *)
    set currentnum to framenum as string
    try
    set filo_namo to file ("RAMdisk:" & currentnum & ".jpg") as file specification
    tell application "URL Access Scripting" to download ¬
    "http://www.topnews.in/files/isla-fisher.jpg" to filo_namo
    end try
    set framenum to framenum + 1
    delay 28 (* results in a capture cycle of about 30 sec *)
    end repeat
    Obviously you need to change that isla-fisher link to a webcam JPEG that is constantly changing. Not all webcams provide a JPEG at their URL location, but some do. You can change the main loop to use idle or some other Applescript flow control. This is written using AS 1.6. Have fun with it! And do i get credit for answering my own question?
    Message was edited by: paulpen

Maybe you are looking for

  • How do i access multiple bex queries in one crystal reports??

    Hello Experts, I have 10 cubes and 30 bex queries on it and i need to create 3 final crystal reports on these 30 queries. I am on BI 4.0 & CR 2011. but my client is not on correct SAP patch ie., he is on 15+ but he must be on 23+ to access multiple b

  • Nvidia-dkms module for GeForce 610M

    Hello everybody, I always use nvidia-dkms package as driver for my GeForce 610M GPU But recently when I try to load nvidia module modprobe produce this error: # modprobe nvidia modprobe: ERROR: could not insert 'nvidia': No such device so  dmesg | ta

  • Any relationship between bi server cache and bi presentation service cache?

    If I disable the bi server cache from the EM and the physical table's cache is also disabled, will bi presentation service's cache still work? I found that,after doing that I can't get the ns*xxxx.tmp file at all :(. Or any other reasons I can't cach

  • HAStoragePlus NFS for ZFS - nested ZFS mounts

    I have a two node cluster setup to be a HA nfs server for several zpools. Everything is going fine according to all instructions, except I can not seem to find any documents that discuss nested zfs mounts. Here's what I have: top-level zfs: # zfs lis

  • Authorization at domain level

    Hi all , I have a requirement wherein I have a put an authorization at domain level. The authorization group and object have been created. How to find the exit where i can use thse objects for the domain. Domain is BANKN . Pls help . Thanks Supriya