AVOID Subpartition(list) to be created when Splitting Main Partition(range)
I have created a table structure as below:
CREATE TABLE TEST_SUBPARTITIONS_1
RECORD_ID INTEGER NOT NULL,
SUB_ID VARCHAR2(100),
COBDATE DATE,
DESC VARCHAR2(2000)
PARTITION BY RANGE (COBDATE)
SUBPARTITION BY list(SUB_ID)
PARTITION INITIAL_PARTITION VALUES LESS THAN (TO_DATE(' 2200-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
TABLESPACE TBS_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE
INITIAL 64K
NEXT 1M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
(SUBPARTITION INITIAL_SUBPARTITION VALUES ('INITIAL_DUMMY_SUB_ID') TABLESPACE TBS_DATA
CREATE UNIQUE INDEX TEST_SUBPARTITIONS_1_PK ON TEST_SUBPARTITIONS_1 (COBDATE, RECORD_ID, SUB_ID) LOCAL;
ALTER TABLE TEST_SUBPARTITIONS_1 ADD CONSTRAINT TEST_SUBPARTITIONS_1_PK PRIMARY KEY (COBDATE, RECORD_ID, SUB_ID);
I am partitioning the table based on range (COBDATE) and subpartitioning based on list (SUB_ID).
The table now is created with initial partitions and initial subpartition.
We are splitting the partitions in our procedure as below
ALTER TABLE TEST_SUBPARTITIONS_1 SPLIT PARTITION
TST_SUB_R21001231 AT (TO_DATE(20130220,'YYYYMMDD') ) INTO
(PARTITION TST_SUB_R20130219 TABLESPACE TBS_DATA, PARTITION TST_SUB_R21001231)
The partition is getting split correctly with new partition as
TST_SUB_R20130219, but the subpartition is also created automatically with some 'SYS' name.
(i.e Name: SYS_SUBP693 , Values: INITIAL_DUMMY_SUB_ID)
This happens after every split of range by COBDATE.
Here it has created as below:
Partition SubPartition
TST_SUB_R21001231 INITIAL_SUBPARTITION
TST_SUB_R20130219 SYS_SUBP693
TST_SUB_R20130220 SYS_SUBP694
TST_SUB_R20130221 SYS_SUBP695
I want to AVOID splitting subpartition when I split the main partition
i.e a SYS subpartition should not be created when I split the partition for COBDATE.
Let me know how do I avoid this in main "alter statement" above?
Any other solution? I do not want to drop the SYS subpartition later, instead want it to avoid creating only when I split the partition.
>
I want to AVOID splitting subpartition when I split the main partition
i.e a SYS subpartition should not be created when I split the partition for COBDATE.
Let me know how do I avoid this in main "alter statement" above?
Any other solution? I do not want to drop the SYS subpartition later, instead want it to avoid creating only when I split the partition.
>
The subpartitions aren't being split. Oracle is creating new subpartitions for the new partition. The subpartitions need to exist since that is where the data is stored.
You can avoid the SYS prefix on the name though by using a different naming convention.
See the 'Splitting a *-List Partition' section of the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1008028
>
The ALTER TABLE ... SPLIT PARTITION statement provides no means of specifically naming subpartitions resulting from the split of a partition in a composite partitioned table. However, for those subpartitions in the parent partition with names of the form partition name_subpartition name, the database generates corresponding names in the newly created subpartitions using the new partition names. All other subpartitions are assigned system generated names of the form SYS_SUBPn. System generated names are also assigned for the subpartitions of any partition resulting from the split for which a name is not specified. Unnamed partitions are assigned a system generated partition name of the form SYS_Pn.
Similar Messages
-
Create list item in parent site when list item is created in child site?
SharePoint online - Can I create a list item in a parent site when a new list item is created in child site? Possible with workflows?
Hi Shafaqat,
From your description, my understanding is that you want to create a list item in the parent site when a new item is created in the subsite via workflow.
Per my knowledge, there is no OOTB workflow action to achieve your requirement. I suggest you develop your own workflow activity to do it, or you can try to find a third party workflow solution to do it.
Here is an article about how to create a custom workflow activity, you can take a look at:
http://www.sharepoint-reference.com/Blog/Lists/Posts/Post.aspx?ID=37
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I cannot get my iPhone3 to sync playlists. If I create the play list on my iPhone, when I sync the playlist is deleted. If I create te playlist on iTunes, when I sync, it will not transfer to my iPhone. Help!
Hello jmazumba
Continue your troubleshooting with the article below to resolve the issue with connecting to iTunes. It will walk you through checking the drivers as well as third party security software for any conflicts.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
To show the list in complete format when creating an background job
Hi ,
I need to show the list in full format when after running a report in background.
In sm37 after the job run the the full list is not shown.
when I click on 'Show complete list 'it will show the complete list.
My requirement is I want this option in default .Is there any thing we can do by configuration or is there any chance of enhancement
kindly help
thanks and regards,
Subeesh KannottilHi Subeesh,
It is one of the standard setting provided by SAP for extracting spool output.In most of the case it is sufficient. Incase of special requirement we can do as below.
In SM37,open the spool and click the icon Display in Maximum Width or (Shift+F4). Then the complete list will be displayed.
Regards,
Kannan -
Diskutil problems when trying to split mac partition
I'm having some serious issues trying to get my mac to partition properly. I think my computer hates me. Anyways, when I try to use diskutil to split my partition up into four partitions i get an odd error that I can't find anywhere online - it says "Resizing encountered error on disk disk0s2 MacOSX: Operation not supported by device (19)", the diskutil list displays:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *149.1 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS MacOSX 148.6 Gi disk0s2
and the command I've run is:
sudo diskutil resizeVolume disk0s2 60G "Ext2" "Linux" 20G "NTFS" "Windows" 68G
and I've installed plugins to handle the Ext2 and NTFS formats, so I have no freaking clue what's going on, please help! Thank you very much in advance!You have to specify the numberOfPartitions you are adding:
sudo diskutil resizeVolume disk0s2 60G 2 "Ext2" "Linux" 20G "NTFS" "Windows" 68G -
How to register 10g ODBC driver list in the Create New Data Source window
Hi
I've checked the dll for the odbc is in the correct home path. However, i don't see the list of the driver when i try to create a new data source. Is there a way besides reinstall the client again.
Thanks
Rgds
UngHi Joe,
According to your description, after you run C:\Windows\SysWOW64\odbcad32.exe, Access driver is not displayed when you expand HKEY_LOCAL_MACHINE>ODBC>ODBCINST.INI node.
The issue is caused by wrong path of odbccad32, please make sure that you are using Administrator account or you have administrative privileges, then refer to the following steps:
Go to Control Panel.
Click Administrative Tools.
Right-click Data Sources(ODBC) to open Properties dialog box.
In Target text box, type %windir%\syswow64\odbcad32.exe
In Start in text box, type %windir%\syswow64, then click OK to save the settings.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu -
Im wondering if I can directly copy the prores files fcpx creates when importing c300 .mxf files from the "original media" folder, reimport them for another project to and use them that way. Is there any problem with working that way? I'm doing this bc I want to have an organize finder structure for a client but cant break the c300 card structure to split clips on a card into different "scenes" to make it easier for them to understand what they're looking at. This is all to stay NLE nuetral--we like fcpx but they might want to edit somewhere else and more details in the finder level seems like the best solution? Suggestions on any of that? Thanks.
Thanks for your response. Are you sure that FCPx is working with .mxf/c300 natively? I thought it was just a background sort of repackaging or transcode into prores that it does without you having a choice? And bc of that, for me, it's sort of a "back end" feeling file: I'm curious if it's bad to get into the package contents folder to copy it over? Not about copying prores in general-- specifically, is the prores created of c300 footage in fcpx more of a fcpx, high quality alias file? Maybe I'm just feeling a little uncomfortable grabbing things from the inside/finder level of fcpx.
-
How to avoid booking of stock every time, when ever I make Delivery
Hello friends,
Need your help again
1) When I am making the delivery, at the time of PGI, system asks for sale order stock.
I donu2019t want to book stock of material against sales order, whenever I make delivery.
How can I avoid booking of stock every time, when ever I make Delivery?
2) Can any one tell how we can relate Moment Type with Delivery Type., and how system recognize which Movement type is to be used for Good Issue and Good Receipt..
I will be thankful if I may get any response.
Thanks
SiddharthHi
At the time of PGI the system asks for sales order stocks?
This is picked by the system because of the special stock indicator E in the VOV7 settings of your sales order item category
If MTO by default the item category will have this special stock indicator E which is correct
I think you are doing MTS only but your item category is marked with specialstock indicator as E
Remove this from VOV7 and create a fresh order cycle and see
Now it will not ask for special stock at the time of PGI
Dont test it with existing order test it new order cycle after changes in VOV7
Movement type as all said comes from your schedule line category only in VOV6
Regards
Raja -
How to show a jtable created when a tree node is selected in a jsplit pane
hello,
does anyone know how you would go about updating a jtable you have created in a split pane when the data of the jtable changes?
i have a jtree that creates a jtable when a node is selected. i want to display this jtable in a split pane that is created when the gui is launched.
any help appreciated. i know it has something to do with updating a table model but if anyone has any sample code of how to do this, could they post it?
thank you.Hi Laura,
When you make a selection on your JTree, what data are you send to the JTable? Is it an entirely new TableModel that gets set each time?
If you don't already have an implementation, consider using one JTable and simply swap the models in and out on JTree selection. It's probably best to contain the JTable in JScrollPane also. Perhaps not necessary, but calls to revalidate and repaint on the JTable after setting whatever data it is you set should update what is displayed.
Warm regards,
Darren -
How do I create a split screen on a motion clip in Photoshop CS6?
I have a project due soon and the last requirement is to "create a split screen on a motion clip". Any ideas? Thanks!
In the time line panel you will either need to split the video by moving the playhead to the location then click the split button. Or you can add another video if you want two different video's playing.
Because one video is on top of the other you need to scale both videos so they fit the screen. Select one video the press ctrl-t on windows or cmd-t on mac to enter transforms mode. Click and drag the corner to scale the video. Then repeat for the other video. You will also have to move the video's into place.
When satisfied click enter or return on keyboard.
Ex. For standard video the document should be (in the USA) 640x480 pixels. (I believe Adobe states it should be 720x480 for video, but this is only an example)
So, to place two video's side by side each video would have to be divided by 2 for the width. 320x480
When you move the video's they should snap into place.
For two video's that stack, the height would be divided by two - 640x240 -
We have migrated from SP 2010 to SP 2013. When we are trying to create list template from the migrated OOB custom list. List template successfully created but it is not appearing in Add an app section in SP 2013.
Please make sure you have activated "Team Collaboration Lists" feature under Site Features. Also check if the template in the list template gallery is published.
-
Error when splitting Group membership
Hi all,
We are implementing SAP CRM 7.0 EHP3.
I'm having issues with the Split functionality in CRM. I have configured the Loyalty program, memberships, members and cards. The membership type that we use is "GROUP" membership which means one membership for multiple members.
I have a membership with 3 assigned members and when I try to split one of the members, I'm getting an error. After doing some debugging, it looks like the program is looking for "Related memberships" which to me is wrong. This is for "Shared" memberships. I wonder if there is Note or something that we need to apply.
Can anyone help me and let me know if we are doing something wrong?
Regards
JacquesHi Jacques,
I have created the split membership successfully as per the split ratio.
I have followed below steps:
1) Identify a Standard membership with Single member assigned (for ex: membership Id -4)
with Point balance as - 450 points
2) Assign another member to membership ID - 4 and click on save
3) So standard membership turns to Group membership
4) Now Click on Split membership, on the new screen choose newly added member in the drop down.
5) Choose Split ratio for example 60/40
6) Click on split membership, now system will create a new membership( Standard membership)
This will show point balance as 180 points
I hope this helps.
Regards
Pramod -
Multiple workflow columns are creating when the workflow is started
Hi,
I have created the workflow based on "Document" content type and have deployed and associated it to it's children content types(CT1, CT2, CT3), Later i have added documents(Doc1 based on CT1, Doc2 based on CT2, Doc3 based on CT3) in the document
library and run the workflow and they are running fine.
But the problem is that, whenever i run the workflow on the new document which is based on different content type than earlier, then a new "workflow status"column is getting created instead of using the already existing workflow status column.
This behavior is happening only when i tried to associate workflow from code and when i manually associate directly in the site it works fine.
Does anyone know how I would go about this?
ChakradharHi Chakradhar,
According to your description, my understanding is that a same workflow status column was created when running workflow on a new document.
Did you re-publish and re-associate multiple versions of workflow to the content type?
If yes, then multiple workflow status columns would be created on the SharePoint List.
In addition, if we ever delete the workflow association to the content type or list and re-associate later to the content type or list, workflow status columns created by the previous association gets left behind.
I recommend to make sure that the workflow has not been re-published and re-associated.
You can delete the extra Workflow Status Column in the list:
http://nikpatel.net/2010/08/07/delete-orphaned-workflow-status-columns-from-sharepoint-list-views/
http://blogs.msdn.com/b/valdon/archive/2009/05/05/removing-extra-workflow-status-column-in-default-view.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Cant see tables i created when querying.
I cant see the tables i created,when iam making a query.but the table is there in my object explorer window.iam using MSSql server 2012.help is much appreciated.
Are you sure you're querying in the right database?
Try this first and see if your tables are listed
SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME IN ('YourTable1','YourTable2',..)
Another reason can be tables got created in a schema different from your default schema
In that case first identify the schema using
SELECT TABLE_NAME,TABLE_SCHEMA FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME IN ('YourTable1','YourTable2',..)
Then select from table as
SELECT * FROM SchemaName.TableName1
SELECT * FROM SchemaName.TableName2
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Product - How to get the list of products created.
We have a Job running which actually creates products in CRM.
Is it possible to get those list of freshly created / updated products created in CRM so that the user who is supposed to further update those products can find them easily.
Note: This job is a job which resides in the non-SAP system and using XI interface is that we create the products.Hey thanks all for the quick replies. Appreciate that.
The problem which I need to address is that, I know there are certain set of products being uploaded in my CRM. Is there any facility in CRM like a Job which can monitor on the delta changes made to the products and when I run a report those delta changes are visible.
The current work-around which I have at present is from the non-SAP system we know the list of products that get uploaded. We can pass that as a text file to the user so that he can get the list of products uploaded in CRM. But we dont want to adopt this approach.
We want some kind of an interface within CRM which should enable us to do this.
Any thoughts ?
Best Regards
Maybe you are looking for
-
Macbook Pro Mid-2012 Logic Board replacement, Apple Dragging feet?
First some background: I have a macbook pro 13" Mid-2012 non retina covered under applecare until Jan. 2016. Starting in late march, i had noticed some performance issues but never took it in as the issue would subside within a day or two. Going into
-
Multiple component renderer in the advanced datagrid in the same column
Hi All I want is to render multiple Components in the same column based on the rowIndex value. Let me know if it is possible. Right now I am able to render the same components in the multiple rows in the same column. Example for further clarification
-
Pros and cons of ufs logging???
Hello, I�ve read that ufs logging eliminates ufs filesystems inconsistency, but is not enabled by default. Why? Because of extra resource usage? Which are the pros and the cons of using this filesystem feature? Thanks in advance, jmiturbe
-
my 3210 will not print in pink/magenta. photos and other pictures print in green tones. i've seen posts clear back from 2011 with no replies or solutions. if this is hp's definition of product support, i will be sure to choose a different manufact
-
Help: Reliable approach to install and use Windows XP on Macbook Pro
Hi, I am very excited to know that my new Macbook Pro can run windows OS. Finding a free downloadable copy on Internet, I'm so afraid of massing up my New Macbook Pro system. I'm thinking VM ware Fusion combining with Windows XP on a CD would be the