Awaiting for reply.....

Hi,
Is there a simple way to add fields in the Demand Monitor. To explain Lead time field is there in standard but my requirement is additional field called supplier lead time which is not available in standard ( this lead time is supplier to his supplier )this is specific requirement of my client. If there is one, can someone help me out to point me in thru right direction? I was hoping there is a configuration that allow us to add fields so I do not have to copy the application and make the modification in the copied BSP program. Any idea?
also suggest me is it possible to add column in demand monitor.....
awaiting for ur reply...
~Rupesh Mundhada

yaa... its a SMI Monitor(or demand monitoe view supplier details) with supplier details view. In that there is Lead time in standard. i want to add one more lead time there which is suppliers to his suppliers...is it possible...
Do Reply..

Similar Messages

  • I am suspicious about  my billing. What am I going to do? Awaiting for your urgent reply.

    I am suspicious about my billing. What am I going to do? Awaiting for your urgent reply.

    These are user-to-user forums, you are not talking to Apple here.
    As you don't say what you are supicious about it's difficult to know what problem it is that you think that you have.
    You can check the purchase history on your account via the Store > View My Account (Store > View My Apple ID on iTunes 11) drop-down menu option on your computer's iTunes), though I'm not sure if that shows in-app purchases and/or auto-renewing subscriptions .  If you haven't purchased anything and you haven't added or changed your credit card details (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) then you can contact iTunes support via this page if you have charges that you don't think that you should have : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • What Are the Exact Basic rules for Replying a Thread...... -:)   @};-

    Hi Experts,
    After Looking into the forums many days I had a small conclusion about forums,
    SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
    Why can't we make it a BEST Place.
    This is just a small doubt which I would like to clear myself first,
    I have seen many users In the forums asking for a Basic Questions
    When cleared, But still they want to have a Spoon feeding with a Sample Code.
    When Sample Code Given they will provide the original code and requests for Modifications.
    These always looks to me as crazy.
    I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
    I am not sure whether if still this Rule AVAILABLE or NOT.
    Ok if the task is really difficult let them ask again and again,
    And it was not replied, let them repost, I agree with them.
    And How about a User Registered in SDN very long back and asking for a silly question in below thread,
    [Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
    This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
    [Radio Buttons |Radio Buttons;
    [Turning Off Debugger |Turning Off Debugger;
    [Regarding Amount in words|Regarding Amount in words;
    There are 100's of threads like this....Everyone knows this facts.
    Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
    [how to validate POsting period |Re: how to validate POsting period]
    Now My Real Problem is....!
    User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
    And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
    the basic rules " Why Contributing ?"
    According to me It's not the Requestor to see Rules & Requlations before posting the threads,
    But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
    If we follow the rules and stand on a single word or rule or anything there will be Good Result.
    Major Problem is in US not anyone else.
    Example Some one saying search in the forum,,, then please no replies after that...
    But we are very pity hearted again we post the solution,,,
    But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
    And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
    They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
    They will never realize what they are doing,, and we will never let them improve better...
    Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
    Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
    Thanks & regards,
    Dileep .C
    Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
    Title Changed Form
    "What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

    Hi Stephen,
    Very useful Information,
    First tell me a little something about my self...
    After completion of my certification(as a fresher) I was down the streets hunting the job,
    with the insufficient knowledge and being a non-experienced person, I never got one.
    And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
    When I got a job afterwords I was doing the job and never seen SDN page for many months,
    when I came to know that of we have doubts we can post at SDN. then started requesting help,
    I posted only a little, I didnot got the proper response. on that day I decided,
    still there are some places where we cannot get help on time and there will be people waiting to get help,
    Why cant I put some of my efforts to help others.
    Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
    when I feel my self comfort for contributing, I started contibuting...!
    If you haven't read it, take a look first, so you can understand where things are now.
    I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
    I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
    "O SDN, where art thou?" So it dosent hit my in the list.
    Like everybody until a certain stage I am also rushing for points.
    But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
    I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
    From that day till date I have changed a lot to myself.
    Everyone cannot change like me because they are not like me & And I dont even expect that...!
    I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
    My only point is I am just requesting to a co-contributor,
    Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
    please dont reply any more, If you have a better solution than that, then only reply,
    Even there is one reply in the thread not a matter, if correct answer leave that query.
    If still error persists, Show up with your Idea's...
    Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
    I am just looking for this one exactly to circulate between ourselfs.
    For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
    You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
    and +ve factors will show up definetly.
    A real contributor always understand what I am talking about, but some one who hunts for points will never.
    I am really sorry if I am troubling with my doubts & requests,
    If so, Pleae forgive me,,
    Thanks & regards,
    Dileep .C

  • Create hyperlink for reply to in mail body while sending email.

    Hi All,
    We have a requirement where we need to create an hyperlink for reply to in the mail body.
    We have implemented entire functionality using CL_BCS classes and everything is working fine.
    Only problem we have is when we give document type as HTM instead of RAW then entire formatting of mail body gets disturbed although we get the hyperlink.
    Is there any way where we can send the mail in html format using CL_BCS,CL_DOCUMENT_BCS ?
    KR Jaideep,

    Hi ,
    Please find the code below I am using to make the hyperlink. Do I need to fill the entire mail body using HTML Tags ? If yes, then I guess it will increase the complexity of program as the mail content will vary from one mail to another depending upon whether different invoice documents have text maintained in them.
    lwa_text = '<html>'.
        APPEND lwa_text TO li_text.
        CLEAR lwa_text.
        lwa_text = '<body>'.
        APPEND lwa_text TO li_text.
        CLEAR lwa_text.
        lwa_text = text-012.
        APPEND lwa_text TO li_text.
        CLEAR lwa_text.
        CONCATENATE '<a href="mailto:'
                    lv_receiver
                    '">'
                    lv_receiver
                    '</a>'
               INTO lwa_text.
        APPEND lwa_text TO li_text.
        CLEAR lwa_text.
        lwa_text = '</body>'.
        APPEND lwa_text TO li_text.
        CLEAR lwa_text.
        lwa_text = '</html>'.
        APPEND lwa_text TO li_text.
        CLEAR lwa_text.
        TRY.
            CALL METHOD cl_document_bcs=>create_from_text
              EXPORTING
                i_text         = li_text
                i_documenttype = 'HTM'
                i_subject      = 'Test for hyperlink'
                i_importance   = '1'
                i_sensitivity  = 'P'
              RECEIVING
                result         = lref_document_bcs.
          CATCH cx_document_bcs .
        ENDTRY.

  • A Background job in one of the step delays due to awaiting for Gateway

    Hi,
    We have the month-end jobs executing in our Production systems every last week of month
    It was observed that, one BGD job took 30-45 mins delay to finish.
    - In one of the steps, there is Parallel processing with 56 DIA work processes across 4 Application servers out of 6.
    - It was observed that all these 56 processes were showing status ON HOLD (Reason RFC) when we checked.
    - I went to the BGD job process (sm51) to see if the job is executing
    - I saw the message - further awaiting for Gateway XXXX (Prod server)
    - I checked in SM59 and all RFCs were OK
    - Even in SMGW everything was OK
    Please help me to find what exactly is the reason for the delays due to Gateways
    Thanks & Regards,
    Sameer

    Hi Ashish,
    The BGD job running on one of the work process indicated - "Waiting for Gateway XXXX (Prod system)"
    Here when I checked the 56 DIA work processes, it indicated - ON HOLD & Status - RFC.
    I need to know more on the Gateway mechanisim in this. Hope the problem was in the gateway connection for a temporary proceess
    Else the system was OK. No improper functioning was observed.
    Need to explore more on this.
    Regards,
    Sameer

  • Confirmation ending in Awaiting for Approval Status

    Hi Experts,
    The Confirmation of Goods receipt was working fine till last month. Now For some PO's Confirmation is going to Awaiting for Approval status this is happening only for few PO's and for others PO's Confirmation is happening properly and the status is Posted in Backed.
    I observed that Workitem ID is not created for those confirmation's which are in Awaiting for Approval Status. 
    Please help me resolve this issue.
    Any valuable inputs are Appreciated.
    Thanks and Regards,
    Devananda A J

    Hi,
      First point if you make a GR confirmation means the PO change version will be generated and the PO  workflow will restart for the PO change version.
      Goto BBP_PD  and enter PO number check the PO change version is closed or not. If it is not closed then PO change version workflow will be in Error. If it is in Error then GR confirmation workitem will not be genrated.
    all these things will happen because of if you create a GR confirmation or any changes made to PO when the PO status is still in Transfer status.
    regards,
    Devi

  • Shopping cart in status awaiting for approval

    HI ,
    Scenario is
    case 1     SC is created and ordered, but status is having awaiting for approval.
                    when we did dummy changes in SC and ordered, then we got approved stattus.
    my problem why in first case work flow is not started .
    Appreciate your efforts and will be rewared.
    Regards
    Ramakrishnaiah Y

    Hi,
    When you ordered the cart first, did you check if a workflow was started?
    BBP_PD -> SWI6
    If a workflow was started then expand the workflow in the technical workflow log to see if there are any errors in the log.
    If the workflow was not started then check with the start conditions to see if they match the first cart cart. Refer to note 322526 for other checks to carry out.
    Which release are you using?
    Kind regards,
    Siobhan

  • Shopping Cart is awaiting for approval even it is not needed.

    Hello friends,
    I am implementing SRM 5.0 and i am facing problem related to approval of shopping cart.
    Even the shopping cart does not need any approval the status is showing as
    it is awaiting for approval.
    When i go in to detailed through transaction sw2i_freq the system status is in " error".
    What could be the possible reason for this situation? .
    i am using SRM 5.0 with service packe 6.0.
    I appreciate your valuble answers.
    Thanking you,
    Mahesh Madasu.

    Hello Mahesh,
    If the error message is like Error when processing node '0000000241' (ParForEach index 000000), check the note 962488 "Workflow definition '&' not in version '&'".
    Regards,
    Masa

  • Shopping cart awaiting for approval

    For the documents shopping cart, RFX we dont have any approval proceedureonce the shopping cart is created it gets auto approved.
    But for the documents in the approval tab shows automatic approval for the documents, but in the query report for the the document shows awaiting for approval.
    Can you guide me on this
    Thanks in advance

    Hi,
    What is the document status and workflow status in BBP_PD transaction?
    I guess there is some error when creating follow-on document.
    Regards,
    Masa

  • After Rejected still Status 'Awaiting for approval'..

    Hello Friends,
      I am in SRM 5 and SP07..
      After SC has been rejected.. The status shows awaiting for approval but inside when i click on the item the status shows 'Rejected'.. And the workitem is not come to back to requestor inbox inside of that the next level approver pull out from the list and error message through as 'Approval step without ad-hoc capability.no preview possible'..
      I am using n-step Badi with WS14000133..
      and also i checked in SWI2_FREQ with TS10407972.. in the Agent 'No agent Available' but i can see the created_by cointainer has got filled with 'USJOHN'.
    please give your thoughts..
    Thanks,
    John.

    Hello,
    We had also faced this problem.
    You need to raise an OSS.
    but we were on 4.0.SP08
    surprised for 5.0SP07 this problem is continued
    you will get a note from SAP to apply
    the note which we got may not be applicable to you
    BR
    Dinesh
    <b>Reward if helps</b>

  • SC status is still in Awaiting for Approval Even after PO and confirmation creation.

    Hi Experts,
    We have SRM 7.0 with Classic scenario, Here we have strange case where for One SC already backend PO created and Confirmation is done. Still SC status is showing as Awaiting for approval. Kindly Help me to solve this issue.
    Thanks in advance
    BR,
    Basu

    Hi Basu,
    What is the workflow framework that your are using. Is  it application controlled workflow?
    1.     Go to T code BBP_PD and check if the workflow triggered for the shopping cart is in in-Process status. If it is in in-process status copy the header workitem and go to T code SWPC , remove all the values displayed in the selection screen just enter the header work item ID and execute.  If you are able to see any entry after execution select it and click on continue workflow. this will fix your problem.
    2.     Check in transaction SM58 to see if there are any failed entry on the day of shopping cart creation , if there is any entry in failed status please reprocess the LUW.
    hopefully any one of the above steps will fix your issue.
    Regards,
    Suresh

  • Outlook 2011: Adding some messages to "Waiting for reply" folder

    My use case is that I want to track for responses on some messages I write. My methodology now is to wait for the message to be sent the move it from the sent folder to the "Waiting for reply" folder which I go over periodically.
    I'm looking for a way to automate this. Best would be if I press a key which makes Outlook both send the message and put it in the Waiting folder. E.g., by using an applescript.
    Alternatively, I thought that pressing a key will add me as BCC, and also add a "*WF*" string at the bottom of the message. Again, with applescript. Then when I send the message it will also arrive at my Inbox where I'll have a rule to move messages to "Waiting" if they contain "*WF*"

    Hi Ryan,
    I suggest double check the permission configuration.
    And also check whether the reply button enabled.
    Thanks

  • In when I reply to sender in Email at times it can take 15sec for reply email to appear. Often same occurs when initiating a new email?????

    When I reply to sender in Email at times it can take 15sec (spinning beach ball) for reply email to appear. Often same occurs when initiating a new email? Anyway to eliminate this?

    Speak to your ISP. Check your internet connections.

  • Charge for replying to Sky's 65150 number

    I spoke to Sky yesterday and today received a text message asking for customer feedback. The text stated the replies to 65150 would be free.
    However, when I tried to send my reply a message appeared stating I would be charged for this message. Why? I have unlimited texts on my £5/month contract and is Sky say the reply is free then why wouldn't it be?
    Solved!
    Go to Solution.

    I'm with three and have never been cgarged for replying to these types of questionnaires
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • Business Place in ECC 6.0....Awaiting for your reply.......

    Hello,
    While posting business transactions(WHT transactions) via TC: F-43, FB50 or FB60 system is not showing business place field. I went to OBC4 and check even there is no business place/section code field. How should i get activate BP/Section code field in F-43/FB60.
    Please guide me without using Validation / Subtitution
    Regards
    Krishna

    Hi,
    Business place and section code fileds come automatically for a vendor/customer.
    When you talk of F-43 screen, after you enter the posting key 31 for the vendor, these fields would come up.
    These would not come up automatically for a GL. And hence you dont find in FB50.
    You would again find the same in FB60 in header data (under basic data tab).
    Hope its clear..
    Caio
    Raghu

Maybe you are looking for

  • To save custom fields in MM01

    Hi All, I have created a new fields in MM01 transaction and iam trying to save the data. These fields are appended to the MARA table using append structure. Iam not able to save the data entered in these new fields to MARA table. Do I need to add the

  • Getting track listing on iPod to match the ones on iTunes...

    Hello. I've never figured out why on iTunes I can manually set the track order of an album, but when I sync it to the iPod the track order never changes. Just wondering if there is a way to set the iPod track order manually to match the iTunes track

  • Can't Stop Cover Page from Printing

    Every time a user prints a report, they are getting a cover page as listed below. If there is a way, how can we stop this cover page from printing? Thanka ahead of time. ########## User: applmgr@prowvdb1 ##### Title: JDoe.649719 ##### Date: Mon 09:35

  • Windows XP will not update to latest version of iTunes, any ideas

    iPhone will not connect to PC (Windows XP) because PC requires 11.1 or later.  When I try and install the latest download it states "the feature is on a network resource that is unavailable, enter an alternate path to "iTunes.msi".  What does this me

  • Any methodology to secure a document on Sourcing Approval ?

    Hi All, I have a use case where we need to secure a document/attachment on the Sourcing Approval. The need is to publish this document to supplier portal at the facility level only and, at the same time, restrict view from selected internal folks tha