Axis receiver adapter error

Hi,
I am getting the following error when i check the MDT for the Axis Receiver Adapter.
com.sap.aii.utilxi.misc.api.UnexpectedException: Internal Error: An unexpected error occurred (java.lang.NoSuchMethodException: com.sap.aii.mdt.server.integrationengine.IntegrationEngineDataImpl.getDuration())
The Stack trace is as follows
Stack trace for the above error message is:
com.sap.aii.utilxi.misc.api.UnexpectedException: Internal Error: An unexpected error occurred (java.lang.NoSuchMethodException: com.sap.aii.mdt.server.integrationengine.IntegrationEngineDataImpl.getDuration())
     at com.sap.aii.mdt.api.data.Attribute.getDisplayFieldValue(Attribute.java:463)
     at JEE_jsp_monitor_monitor2_113430051_1317630683360_1323173672867._jspService(JEE_jsp_monitor_monitor2_113430051_1317630683360_1323173672867.java:573)
     at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:428)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:147)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:457)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
     at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:276)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
     at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: java.lang.NoSuchMethodException: com.sap.aii.mdt.server.integrationengine.IntegrationEngineDataImpl.getDuration()
     at java.lang.Class.getMethod(Class.java:1605)
     at com.sap.aii.mdt.api.data.Attribute.getDisplayFieldValue(Attribute.java:429)
     ... 45 more

Hi Srinivas,
Post last line when you received this error.
regards
Ramesh

Similar Messages

HTTP (Axis) Receiver Adapter error: The security context token is expired or is not valid

Hi Experts,
We are required to send a message through PI 7.31 (single stack) in a Soap-to-Soap scenario connecting to a Soap 1.2 Web Service.
We are getting a Security Context Token expired or Invalid error.
Please help us resolving this error.
Thanks in advance!
The Channel Configurations are as follows:
Processing sequence:
Module configurations:
1.
2.
3.
4.
Best Regards
Vikram

Hi all !
First of all, thanks for your answers..
Stefan Grube:
Itu2019s not a Adapter Module.
The module tab following configuration
Processing Sequence:
AF_Adapters/axis/AFAdapterBean     Local Enterprise Bean     afreq
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     xireq
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     trp
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     dcres
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     xires
AF_Adapters/axis/AFAdapterBean     Local Enterprise Bean     afres
Module Configuration
xireq          handler.type     java:com.sap.aii.axis.xi.XI30OutboundHandler
trp          handler.type     java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp          module.pivot     true
xires          handler.type     java:com.sap.aii.axis.xi.XI30OutboundHandler
How can i know if those values are correct ?
Srinivas Reddy:
Thanks for the documentation
I have applied SAP Note 11016021 and the error changed, now it says:
Axis: fatal error in invocation: java.lang.NoSuchMethodError: com/sap/aii/axis/xi/XIUtils.setOperation(Ljava/lang/String;Lorg/apache/axis/MessageContext;)V
Message processing failed. Cause: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Edited by: Antonio Guzman on Jul 9, 2008 5:29 PM

Missing soap action in the soap axis receiver adapter ?

Hi Guys,
I could not find the soap action field in the soap receiver adapter and i followed the OSS note
Note 1054986 - SOAP (Axis) receiver adapter's SOAPAction field missing
Please apply the following patch and use the handler parameter defaultSOAPAction for the XI30OutboundHandler handler in the request chain. This handler parameter can be configured as a module parameter for the HandlerBean module associated with this handler. It is noted that this module parameter takes precedence over the channel parameter for SOAPAction if this field is available.
For SP12
XI ADAPTER FRAMEWORK CORE 7.0
Support Package 12, Patch Level 1 (SAPXIAFC12P_1.SCA)
we are on SP15 so i think the option should be available ?
Do i need to add this parameter in the Module Configuration ?
Moduel Key : ?
Parameter Name: handler.type ---> is this right
Parameter Value ---> ?
we need to validate the user id and pw on IIS for NTLM authentication. Any help regarding developong the handlers would be great
any help would be appreciated.
Thanks,
Srini

Srinivas,
You are on the right path...........yes that is the right note for this issue.
The problem is this is not a general fix that comes with all service packs as the axis adapter is not used a lot, that being said.if you dont see it with sp15..i would safely go apply this fix and see if it works..else you might have to open an oss note for the same...
Hope that helps..
Regards
Ravi Raman
P.S: On my home system..i did apply the fix and i was on a much higher sp level ..i saw some errors..in the logs but nothing a restart couldent fix..

File Receiver Adapter Error

I'm using Variable substitution for the Directory I determine dynamically using UDF. I'm gettig following error. Would someone clarify how to wrok around this error.
2006-09-28 14:43:38 EDT: Message processing failed: Error during variable substitution: java.text.ParseException: Security violation encountered during variable substitution: Content of variable var2 is not safe: /sales/temp

Doss,
for Directory I was using variable substitution.
for example %var2% and then Var1 Iam getting from the Payload ( Iam populating the payload from UDF ).
When I checked 'disable security checks' on the receiver adapter screen, I'm not getting this error anymore.
Message was edited by: Ram Krish

Soap Receiver Adapter Error. Pls advice urgent

Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
Regards

Henry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful !

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

AS2 Receiver Adapter Error

Hello,
when trying to send a message using Seeburger AS2 Receiver Adapter I get the following error (strange thing is that it worked before we made some changes, now we changed back and the error occurs):
Description: AS2 Adapter failure MessageId entry with secondaryId <xxxxxxxxxxxxxxxxxxxxxxxx> does not exist! com.seeburger.as2.AS2Plugin.execute
The error message is not meaningful to me. I tried all possible combinations but with no result. What could be the reason for this?

Hi,
Is your issue solved? Can you check the connection without using Certificates. Looks like issue with Certificates.
>> When I uncheck the button the flag "SIGN" in the as2 receiver comm channel. The message is sent out to the partner and we get back a negative acknowledgement (also there is an error MIC not verified in comm chan. ). So maybe it is a problem with digital signature? I have checked the receiver agreement, everything there should be fine
Is your scenario is AS2>XI>AS2 and using Certificates to exchange the messages?
please deactivate the use of dynamic attributes in the AS2 receiver channel. The dynamic attributes are set in the sender channel, there-fore the receiver channel overwrites the data given in the commchannel configuration with the data from the sender channel. Therefore, this is an issue specific for AS2 -> XI -> AS2 scenarios. Your partner might use the wrong certificate or not find the certificate because of the wrong payload name that was initially set in the sender channel.
Can you please check the Message Subject and Content Type how it is going using certificates and without using Certificates.?
-Deepthi.

JDBC Receiver Adapter Error

Hi All,
I am executing SP by using JDBC Receiver Adapter.
My strcture is follows
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<spName type="VARCHAR">SP_CREATE_T_BATCH</spName>
<IN_Control_Recipe hasQuot="No" type="Integer">100000000001723850</IN_Control_Recipe>
</SP_CREATE_T_BATCH>
</STATEMENT2>
The below error I am getting
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_CREATE_T_BATCH' (structure 'STATEMENT2'): java.lang.NumberFormatException: For input string: "100000000001723850"
Any help on this

Hi Ram,
Since you mentioned that your SP has one input parameter and one output parameter, the structure of the XML message at the JDBC receiver side should be:
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<IN_Control_Recipe isInput="true" hasQuot="No" type="BIGINT">100000000001723850</IN_Control_Recipe>
<Output_Parameter isOutput="true" type="SQLDataType"></Output_Parameter>
</SP_CREATE_T_BATCH>
</STATEMENT2>
Here, i have assumed the following:
SP_CREATE_T_BATCH - The name of the Stored Procedure to be executed
IN_Control_Recipe - Input parameter of the SP and its SQLDataType is BIGINT as suggested by Stefan.
Output_Parameter - Output parameter of the SP. You may enter the SQL data type as per the output of your Stored Procedure.
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output),CLOB (input and output), CURSOR (output; only in conjunction with the Oracle JDBC driver).
Hope this will surely solve your problem.
Regards, Gaurav.

JMS receiver adapter Error

Hi Experts,
Any idea about this error. We are getting following in JMS receiver adapter in PI 7.1.
Delivering the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Connector for ConnectionProfile of channel: JMS_Receiver_THQPRD2_Slow_Replyon node: 284760550 having object id: cf2f6eb7d6c93902b64b27bfcaad0ba5 encountered error: MQJMS1016: an internal error has occurred. Please contact your system administrator. Detail: java.lang.NullPointerException: while trying to read the field 'ccsid' of an object loaded from field com.ibm.mq.MQSESSIONClient.comms of an object loaded from local variable '<0>' in sending to destination queue:///QR.EAIPRD.THQPRD2.REPLY.SLOW?targetClient=1, the message message: JMS Message class: jms_text JMSType: null JMSDeliveryMode: 2 JMSExpiration: 0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 0 JMSCorrelationID:ID:414d5120504c535748353533202020204e6324ae23eb5b2d JMSDestination: null JMSReplyTo: null JMSRedelivered: false XPLOR PIPXSDI2030 45219q00282YSDI2030PROCESS_MQSERIES PLSWH553 Another 12,761 character(s) omitted: javax.jms.JMSException: MQJMS1016: an internal error has occurred. Please contact your system administrator. Detail: java.lang.NullPointerException: while trying to read the field 'ccsid' of an object loaded from field com.ibm.mq.MQSESSIONClient.comms of an object loaded from local variable '<0>'.
Thanks,
Hari

Hello,
The error indicates a JMS driver issue.
Another customer resolved this issue by updating their MQ and the MQ drivers version (in their case to 6.0.2.8.)
You could try contacting IBM for advice on a similar upgrade.
#1086303 XI JMS Adapter and IBM Websphere MQ: FAQ
12)What is the recommended version of MQ drivers for the PI JMS
Adapter - IBM MQ connectivity ?
Kind regards,
Sarah

Error in JMS receiver adapter: "Error creating initial context with environment"

Hello,
I have some trouble with a JMS receiver adapter (access to JMS-provider with JNDI).
The message in adapter monitoring is:
A channel error occurred. Detailed error (if any) :
com.sap.aii.adapter.jms.api.connector.ConnectorException: Fatal Error looking up connection factoryJMSQueueConnectionFactory, for profile: ConnectionProfile of channel: CC_JMS_RCV_XLIMI00001on node: 503473150 having object id: 5b424f2f79b6350ca636ab35d528cfdd:
ConnectorException: Error creating initial context with environment: java.naming.provider.url=wcsefdev.example.com:9064; java.naming.factory.initial=com.ibm.websphere.naming.WsnInitialContextFactory; for profile: ConnectionProfile of channel:
CC_JMS_RCV_XLIMI00001on node: 503473150 having object id: 5b424f2f79b6350ca636ab35d528cfdd: javax.naming.NoInitialContextException:
Cannot instantiate class: com.ibm.websphere.naming.WsnInitialContextFactory<br> at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory
(JndiConnectorImpl.java:152)<br> ....
Message processing failed. Cause:
com.sap.aii.adapter.jms.core.fsm.DFA$InvalidTransitionException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_RCV_XLIMI00001:5b424f2f79b6350ca636ab35d528cfdd
The third party assured me that the specified JNDI parameters are right and everything is configured on their site, so it should work...
Might there be a problem with the JMS drivers?
Regards,
Marcus

Hi Marcus,
Have a look at below thread
Connecting to PI 7.11 JMS Queue from other PI 7.11 Server

WS Receiver Adapter Error - Error in WSDL access for task ID

Hi Experts,
Need Help..I am working on (PI 7.1:HP-UX) IDoc to WS Adapter scenario. Message failed in SXMB_Moni...Pasting the Error log. Does this related to any Network Issues? Do I need to do anymore configurations in WS Received Adapter?
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error in WSDL access: 'Error in WSDL access for task ID "00000000000000000021"; read the long text'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Phani Akella.

Hi,
Ports were opened in the firewall...Now struggling with a different error. Gone through SDN and found Note 1142454 - Error when initializing the SOAP application.
System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text&#39
This did not help...Do we need to do any SOAMANAGER Configuration? Please suggest.
Thanks in Advance,
Phani Akella.

JDBC Receiver Adapter Error with SAPClassNotFoundException

HI Friends,
I have configured the JDBC Receiver Adapter with parameters as
Driver: oracle.jdbc.driver.OracleDriver
Connection: jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB
XI 700, Oracle DB 10.2
I have installed JDBC driver for Oracle as guide How Install and Configure External Drivers for the JDBC & JMS Adapters.pdf. I can see file ojdbc14.jar at D:\usr\sap\<SID>\DVEBMGSNN\j2ee\cluster\server0\bin\ext\com.sap.aii.af.jmsproviderlib.
But Im still getting an error SAPClassNotFoundException as following:
#XI AF com.sap.aii.adapter.jdbc.XI2JDBC@1497c21##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Accessing database connection 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB' failed: com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB': SAPClassNotFoundException: oracle.jdbc.driver.Oracledriver#
#XI AF com.sap.aii.adapter.jdbc.XI2JDBC@1497c21##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###JDBC_ERR_207#
#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Accessing database connection 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB' failed: com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB': SAPClassNotFoundException: oracle.jdbc.driver.Oracledriver#
I tried to install JDBC driver again but it was not solve this problem.
Please suggest!
Regards,
Cuong

HI Cuong,
It seems something wrong with the installation of JDBC driver or in the config parameters for Adapter.
Not sure if driver is case sensitive.
But from the log it shows "oracle.jdbc.driver.Oracledriver".
Try putting "oracle.jdbc.driver.OracleDriver".
regards,
Pinkle

How to trace HTTP receiver adapter error

Hi All,
My scenario is to send PO details to vendor site (HTTPS URL). MY SSL configuration is complete and I have used the SSL certificates in RFC destination of type 'G'. When I test RFC destination connection, it gives me the correct response as '200'.
This RFC destination is used in HTTP receiver adapter of XI to connect to site and post PO xml document. It is passing successfully through Integration Server, as I get success flag in 'SXMB_MONI'. But, it is not reaching our vendor's site.
Can someone help me, with what's going wrong, or how can I trace the error.
Thanks & Regards,
Amit

Hi Sadhna,
It's a B2B scenario, where my sender is configured correctly and the receiver as well.
In sxmb_moni, I am getting successfull status. But, it is not reaching receiver.
Thanks & Regards,
Amit

HTTP Receiver adapter error ?

HI Guys,
I have configured the IDOC-HTTP. I have defined a bsuiness service on the receiver side as the receiver is not in our landscape and he is our business partner.
I have created a RFC connection of type G and it is working properly but the HTTP reciver adapter gives the error as below
I'm getting an error when I go to "sxmb_moni" which says
Error Category = PLAINHTTP_ADAPTER
Error ID = ATTRIBUTE_SERVER
Kindly help..
Thanks,
Raj
Message was edited by:
raj reddy

Hi Raj,
<b>Error Category = PLAINHTTP_ADAPTER
Error ID = ATTRIBUTE_SERVER</b>
as far as i know this problem is due to high traffic.When the data comes in bulk some of the message are failing or when they are not able to connect to reciever server.So it gives error.
u can look @ these threads of similer taste
PLAINHTTP_ADAPTER.ATTRIBUTE_SERVER error
PLAIN HTTP ADAPTER -ATTRIBUTE_SERVER ERROR
Plain HTTP adapter error
PLAINHTTP_ADAPTER - ATTRIBUTE_SERVER
and also look @
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
Regards
biplab

SFTP Receiver adapter error Message could not be forwarded to the JCA adapter

Hi Experts,
I'm needing help to solve a problem with an SFTP Receiver interface.
Before I was sending in the adapter configuration as "Direct" in Write Modus (File .txt) and now I changed to "Use temporary file" is occurring this error:
Message
could not be forwarded to the JCA adapter. Reason: 2: Moving
/ABCftp/To_XXX/140187613515701OUT_20140604-100214-622.TXT.tmp to /ABCftp/To_XXX/01OUT_20140604-100214-622.TXT failed.
Files as TXT they are being written to the SFTP however when as TMP returns this error ... would not rule SFTP server to accept different TXT files?
I also changed the namespace to "http://sap.com/xi/XI/System/SFTP" and "http://sap.com/xi/XI/System/File" but is not working.
Any help will be welcome!
tks.

Hi Durga and Naveen...
I believe the problem is when the application's legacy system picks up the file because the log file got the "tmp", ie, was not formed yet ...
I changed to a directory without the intervention of the legacy application and it worked.
I'm waiting for the opportunity to modify the legacy system to capture only files with the extension TXT.
Tks All for help!

Axis receiver adapter error

Similar Messages

Maybe you are looking for