b / ? space after the b?

Why is dreamweaver putting a space after the "b" in ?

XHTML syntax?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"winawanus" <[email protected]> wrote in
message
news:enbcgu$j35$[email protected]..
> Why is dreamweaver putting a space after the "b" in
?

Similar Messages

Create a list style with unique space after the last list item?

I should start by saying that I'm a web designer and therefore extremely used to using CSS for type setting to the point that I now become frustrated when going back to the print world
So here's what I'm trying to achieve:
- I want to create a list style for bullet lists
- I want there to be 3pt space after and space before paragraph breaks
- I want there to be 9pt space after the entire list (or last list item)
I can't for the life of me figure out how to do this short of overriding the space after amount on the last item each time I use my style.

Hi supportneeder
Welcome to the forum.
Try this link:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=179&mforum=iworktips ntrick
Pay attention to how +"styles work by example"+. Form up the list levels the way you want them and then select them to make the list style.
Personally I can't help remarking on the obtuse behavior of programmers that they manufactured all the problems on the internet and only now, more than a decade later, patch together "solutions" they struggle to implement due to the legacy of all the awful standards we never needed to have in the first place.
Peter
btw The last list item is always a problem in typesetting. Usually you deal with it by having a particular style for that or the paragraph afte,r all of which can take multiple forms.

How to stop iphone 4s from putting a space after the second digit, when entering a text number from the keypad

How do I stop the iphone 4s from putting a space after the second digit, when entering a text number from the keypad. Entering a text number on the key pad like 61998 comes out on the screen as 61 998 and the sms fails to go.

The space (or lack thereof) should have no effect on whether or not the SMS goes through. The spacing is intended to make it easier for the human eye to comprehend the number. I'd start by resetting the network settings in General>Reset>Reset Network Settings.

Control space after the Drop Cap

ID3, XP
We character style drop caps. When the DC is a single character, we use the tracking in the character style to add space to the right of the dropped character. However, this method cannot be used when it is a two character drop, in this case, chapter numbers are dropped 2 lines. We want to adjust the space between the dropped number and the start of text, and keep that space equal on both lines.
Any suggestions?
Thanks

The first issue is still that humbled wasn't able to add space after the drop caps and maintain alignment of the text. Bottom line is that his method of using character spacing was a bad hack. I'm pointing out that the alternative solutions he tried (ex. post #4) didn't work because he wasn't using the correct value for the number of drop characters. And per his post #21, he is still assuming that 2 is the correct value to define a double digit drop cap. If he gets past that, solutions to other complications may come easier. In fact, unless he needs some specific sized space HIS WHOLE PROBLEM FROM START TO FINISH could be solved simply by selecting 3 as the number of characters for his drop caps rather than sticking with 2. That would have the effect of including the space after the chapter numbers as part of the drop cap making it larger and adding considerably more space. If he does need more space, then he is going to have to add another character. But that character still has to be included in the DC character count: 12<space>Text (3 drop caps) 12<hardspace>Text (3 drop caps) 12<space><hardspace>Text (4 drop caps) He can even use a tab character for a specific indent if he wants. Just switch a tab for the hardspace above. P.S. The same logic holds true for in single drop caps. If you want extra space after, increase the drop cap count to 2 to include the space after.

Why does fix capitalization work when there is only one space after the period in pages 09?

why does fix capitalization work when there is only one space after the period in pages 09? For example: "Turn on 3rd St. After the traffic light." There is only one space after the period in "St." shouldn't it only auto correct after TWO spaces..?? the word After, should be after..

You may also use a noBreak space after the period at the end of the abbreviation.
If I remember well, in such case the capitalization will not apply.
Yvan KOENIG (VALLAURIS, France) mercredi 27 avril 2011 23:34:46

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

HT202905 Applescript is exporting folders with a space after the foldername.

Applescript is exporting folders with a space after the foldername. This is causing problems with an FTP upload of ours. Is there a way to ensure Applescript doesn't insert spaces on the end of folder names?
Thank you!

one4truth wrote:
i bought a used 2 year old macbook pro last week did an erase and install with leopard and once that was done with nothing transfered firewire the drive had over 20 gigs of used space on it so i started snooping around and saw a number of folders in a folder labeled base system that have a solid red circle with a white dash in the middle next to them after clicking on them it says i do not have permission even though i am in under admin?
the fact that you are an admin doesn't mean that you automatically have access to everything. those folders are owned by the system and have restricted permissions. you should not mess with them. those permissions are mostly restricted to prevent curious users with itchy fingers from damaging the system. as an admin user you can change those permissions and give yourself access to those folders but as i said you shouldn't.
any ideas to what it is what to do or why it took over 20 gigs to install?
20 Gigs sounds like a bit too much. have you installed any programs besides leopard itself?

Quicktype adding a space after the selected word.

Does anybody know if the following can be disabled / adjusted or overcome in any way?
If you accept the suggested word then a space is automatically added after the word. If you then wish to add a full-stop, (sorry, "insert a period"!!) comma, exclamation mark etc you have to backspace to the end of the word.
Not earth-shatteringly important nor difficult I know but seriously annoying!

Amazing!
I was about to ask the very same question as neo680.
The solution is so simple, I would never have thought of it.
Thank you very much!

Regular Expression for Removing a space after the a... tag?

Hi there,
I'm fairly new to using Regular Expressions, but am in need of one that will help me find all <a...> tags that have a space immediately following that tag and replace it with the exact same tag, but no space following the <a...> tag.
So, for example, a regular expression that will find:
<a href="somelink.html"> Somelink</a>
as well as:
<a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('sub-nav_button_professional_portal','','images/sub-nav_button_ professional_portal_f2.png',1)"> Somelink</a>
And just remove the space appearing as part of the hyperlink. Does anyone know how to accomplish this?

Thought of that, but it would remove spaces from crucial areas of my pages. For example, conditional logic within a script, like:
for (i = 0; i > (a.length - 2); i += 3)
would become:
for (i = 0; i >(a.length - 2); i += 3)
While that wouldn't pose a huge problem, I'm messing up the syntax in order to fix something else, which is why I wanted to go the route of a regular expression. I need to replace all "<a ...> " (space included) tags with "<a ...>" and make sure that the properties within the <a> tag stay in tact.

I have a movie track and in that track I have a video loop of 10 seconds. I want that video loop to repeat (loop) throughout the entire project. How can I do this? Right now there is a fades out white space after the video clip

I am working on a Garage Band Podcast. I have a 10 second video clip in the Movie track and want to loop it for the entire project. How can I co this?

Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

Space after in one style affecting the style before it

I have bit of text like this:
Bold head
regular body
when I add space after to the regular body style, it has the effect of adding space after the Bold head, but when I directly apply space after using the Control bar, this doesn't happen!
my regular body style has no space before.
Can anyone see why space after in one style would appear to affect the previous style.
when I say "previous" and "before" I mean in the order they appear relative to each other.
thank you!
John

No, there are no manual overrides. I tested with a manual formatting just as an experiment, but then removed it immediately afterward.
InDesign as with many other programs will indicate a modified style with a little "+" None of my text shows this + sign next to their styles.
Thank you!

Space after hyperlink in JEditorPane

Hi all!
I am displaying an html document in a JEditorPane, which has some hyperlinks. Everything is wotking, except that all the hyperlinks have an extra space after the text which is underlined and is a part of the hyperlink.
I saw this problem in the bug database but marked as closed. However I still have this problem using jdk 1.4.1.
http://developer.java.sun.com/developer/bugParade/bugs/4303958.html
Thanks in advance for your help!

I'm sorry but I posted this by mistake. The topic is duplicated, but the other one has the subject corrected and has duke dollars assigned.

Why does my paragraph tag for images get repositioned AFTER the image?

I have TCS2 and link my FM docs to RH.
I use a paragraph tag in FM called "figure" for my imported images. I noticed there is too much space after the images in RH and discovered the "figure" tag is BELOW the images. So even if I map the tag to a RH style, it won't do any good. Any suggestions?

This might fix your problem. Look at how your anchored frame appears in the FrameMaker document. It's probably like this:
┴ ¶
Which is simply the anchored frame marker followed by the paragraph marker.
Now try this. Before the anchored frame marker, add a forced space (CTRL-Space).
|_| ┴ ¶
When RoboHelp interprets this, it appears to place the paragraph before the anchored frame, not after it.
This is assuming you've got the anchoring position set to"Below Current Line," as suggested earlier.
Hope this helps!
Jason

Appending spaces after a CHAR field

Hi,
We are generating a fixed width pipe delimited flat file in our project and hence to keep the width constant for every record, we need to append spaces after the individual values in the records. Some of these infoobjects are not ALPHA converted. This ALPHA conversion can be done at the field level routines by executing "CONVERSION_EXIT_ALPHA_INPUT" but this works only with numbers. For character fields like Name or address, we need a way to append the balance number of spaces to the value of the info object.

This is sample:-
data : a type i,
b type i,
t type i.
a = strlen ( source ).
b = strlen ( target ).
t = b - a.
result+0(t) = source.
please check this.

Read from file without space at the end

i want to read some data from a simple text file. when there is a space after the number in the, that number is read successfully. but when there is no space after that number, the code fails. it seems that sun fortran compiler can not read the number when there is the new line sign exactly after the number.
is there any compiler switch of an option in read or open statement to overcome this problem?
i checed the code with other compilers (gfortran and intel fortran compiler) and they work fine.
Regards

I have not been able to reproduce the problem you describe.
Could you provide a small program and a data file that
demonstrates the problem? Also, please let me know which
version of the compiler you are using. You can find which
version you are using by specifying the option -V on the
compiler command line.
Robert Corbett

b / ? space after the b?

Similar Messages

Maybe you are looking for