B2B Custom Document Type not getting identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

Similar Messages

Oracle Fusion Middleware 11G B2B Document Type not getting Identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

Multiple Number Ranges for AP Document Type not getting triggered

Hi all,
We are posting receivables in the system using BAPI_CTRACDOCUMENT_CREATE. We have huge data of 3.9 million records for which receivables has to be posted. So multiple number ranges has been configured in the system for AP document type.
The issue is even though multiple number ranges for mass processing are configured in the below location in SPRO, none of them are getting triggered. The number range at the first level on the screen is only getting triggered, due to this it is taking lot of time to post documents. Any help on this?
Financial Accounting(new)
     Contracts Accounts Receivable and Payables
     BasicFunctions
     Postings and Documents
     Document
     Maintain Document Assignments
     Document Types
     Maintain Document Types and Assign Number Ranges
Regards,
Karthick.

Karthick:
Mass ranges are only used for FICA parallel mass activities. For your situation, you can define and assign multiple ranges for individual processing in the same IMG activity. Those would then be chosen for your mass postings.
regards,
bill.

PO document type not transferring to Customs management

Hi,
We have configured PO document type in GTS for Import and it got transfer to Complaince not to customs. I have created CULOIM document type and item category on customs. when i checked on this table /SAPSLL/V_TLEYVS i couldn't find CULOIM document type.. When i try to create a new one it say CULOIM document type already exist...
I do not know why it is saying like that even document type not there in that table and where would i find that.
One more question:
When we assign document type to logical system on Customs we can see GTS document type field... when you press F4 you can see CD Cat - A... Can you tell me what is that and where do you define and assign to custom document type.
regards
rc gopi

You can maintain the table by going into the SPRO and defining the doc tyoe you looking for , Onc eyou maintain there it reflects in in this table as it Configuration table.
If you want to delete , add any entry directly in table then u can do that by getting in debug mode.
Select a entry in table
Double click on it
Do /h to switch on the debugging
Press Enter
You will See different Case for "Code"
Type the filed name Code in in "field Name"
it will display the value 'SHOW' you can change this value as desire like to Delete 'DELE' , to insert new value 'AVNO' and then click on change pencil.
and press F8.
Now you come to the screen where u can do the changes and save it.
Custom Doc Category is taken automatically by SAP as for Export and Import doc type in customs it is always A.
If you cDefine Document Types for Advance Docs for Customs Declaration it is C.
Each category has got it one chateristics , so if we defining correct documnet type we need not to worry for category as it will by default come as set in SAP.
Kind Regards,
Sameer

FD33 - Receivable Field in Customer master is not getting updated

FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
How can I control the general FI documents having various FI documents type as relevant to credit check?

Apart from the above,please also check the below:
FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
Any way coming into query not updating the receivables, please check the below points once again.
1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
2. Even if the above all points are checked including above all posts,then also still the same issue repeating then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
thanks,
Srinu.

Error Document type "" not defined

Hi All,
I am getting below error message when i am trying to see the output of a query build on Infoset in SAP R3 system.
The Infoset is build on top of BKPF,BSEG and EKPO Tables.
Document type not defined
Message no. F5814
Diagnosis
Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
document type "" has not been set up in FI customizing
document type is supplied incorrectly from the calling application
System Response
System error.
Procedure
There are two possible measures:
set up document type "" in FI customizing
system error within the calling application - get in contact with the SAP Hotline Service.
Any input on above issue will be of great help.
Regards,
Anjali Singh

Hi Anjali,
In which system you are getting this error? Development or Production?
I think you have doc. type just in BKPF (Accounting documents headers). Check if you have any record with document type blank.
You can use t code SE16N for this issue. When you are setting filter on field "document type" (BLART) you can see the list of values. Check if there is any blank item
Regards,
Omid

Document Type not defined-J1IS

Hi,
When i am doing J1IS Transaction, at the time saving the documest i am getting an error Document Type not defined, so please guide where to define and necessary Customizing for that!
Thanks in advance,

Dear Andy
If I understood your explanation correctly, please check in [VOFA] for the billing type S1, whether you have assigned S1 in the field [Document Type]
For information, as like for F2 document type, RV is the accounting document type which flows by default even if you maintain blank field but for S1, you should maintain the accounting document type for cancellation which is nothing but S1.
thanks
G. Lakshmipathi

Customs document type cannot be determined for external document Type F8

Hello Experts
Need help
I am trying to transfer F8 to GTS 10.1 and getting following message in GTS Transfer log for export:
Customs document type cannot be determined for external document Type F8
New implementation
GTS 10.1 running with SP 12
ECC side Plug-In settings are fine. BAdi is Active.(There is no document mapping for F8/CUSDEC as it is not required in 10.1)
GTS side configurations are also fine. Checked several times by 4 sets of eyes!!
(Include general settings configurations, Customs communication configurations:)
(Defining technical medium, conditions/output parameters, defining messages for communication process,
defining determination for activity sequence and control settings for communication process)
Despite this I am not able to trnasfer F8 successfully
Can someone throw some light on this issue please?
Keshav Murthy
[email protected]

Hi Dhilipan
Here we go..
You asked me to check the following
Please check following things
1) Legal regulation is activated. - Yes Activated
2) Process template assigned to the legal regulation - Yes Assigned
3) Activity Sequence determination - Yes done
4) Open the activity sequence in under Control settings for Communication processes and check if there is a document type assigned to it. Table- /SAPSLL/TLEPAF - Yes done.
It is really puzzling.
Thanks
Keshav Murthy

SAP ArchieveLink For Dunning Document Is not Getting Archieved

Dear Guru ,
I have encountered an issue which I am not able to resolve.
The Issue is like that SAP ArchieveLink For Dunning Document Is not Getting Archieved For a Particular customer whose Dunn.Procedure = DPPD But in the same system it is getiing archieved for other customer whose Dunn.Procedure DPCD.
In our system there is one Job (Z_SD_DK_SALSA_DUNN) through which it can be done
In the Job Step of this job following prog is being called
No. Program name/command
1 ZSDAR_DUNN_PARAMS
2 SAPF150S2
3 SAPF150D2
4 ZSDAR_POST1
5 ZSDAR_REV1
6 ZIFBSAPO
7 ZIFBPREO_MULTI
8 ZSDAR_VK_COVER
9 ZSD_SPOOL_MAIL_PDF
10 ZIFB_INKASSO_INVPDF
The main prog for Printing and archiving Dunning doc is defined in step 3 - SAPF150D2
But for the customer whose Dunn.Procedure = DPPD it is getting failed.
So guru need your kind intervane and suggestion what might be the possible reason it is not getting archieved...
Is there any archival setting we have to maintin in BTE (Business Transaction Event) if it is yes then where and how we have to maintain.
Please give me some guideline to resolve this
Thanks & regards
Saifur Rahaman

Hi,
could you please check if you have read- and write-permission for the path which is mentioned in the
error message?
Further please check transaction DC20 and inform us which path you have maintained for your frontend type?
Additionally please go to transaction DC30 and verify if you have maintained the parameter %AUTO% for workstation application PDF. If you have maintained this value the control is normally handed over to your operating system (e.g. Windows). In this case please check also the Windows folder options for file format PDF. For this, go to 'Start -> Settings -> Control Panel' and select folder 'Folder Options', highlight extension 'PDF' under tab 'File types', click button 'Advanced' and check whether the correct paths are maintained for the relevant actions (e.g. open or print).
Best regards,
Christoph
P.S.: Give points if useful

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

SAP Cloud For Customer : Add Custom Document Type For Attachments in Account Screen

Hi Experts,
I have requirement to add document type for the Attachment as shown below in COD_Account_TI screen.
I have highlighted in yellow is it possible to add custom document type.
1) Where we need to maintain in the configuration or we need require SDK ?
I have maintained 1 custom document type under the path :
Business Configuration --> Open All Activity --> Fine Tunes --> Activities --> Maintain Document Type
2) Is this correct path or we nee do maintain in another location or path?
3) if not possible using configuration ? How it is possible using SDK work?
Many Thanks,
Mithun

Hi Mithun,
We had this problem with the Hyperlinks.
You should look at your Event Handler from the Inport or the Event Handler of the query. Some Data Operation with assign function can lead to an infinite loop.
Like assigning the inport data field to your list that is bound with a custom query.
Best Regards,
Madalin

Error message - Message no. 26168, Document type '' not defined .

Hi,
I am setting up QA system after successful building of Dev System .
While chnaging newly created folder in QA system gives error message - Message no. 26168, Document type '' not defined .
Document Type exists and are used to create folders successfully.
Why I am getting this error?
Kind Regards
Harish

Hi,
Am Not able to implement this Note .
Am facing the same issue .Please let me know the solution ASAP.
Our SAP Version ECC6 EHP6
Regards,
Veeramani

Document type not defined in lsmw idoc method

hello iam posting Open AR Line Items for contract account using message type
CTRACDOCUMENT_CREATE using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the problem.
Regards
priya

Check OMW9, here document type is defined for the transaction MIRO..
Go to OMW9, click in the Document Type.
Then double click on MIRO.
Also check the sap notes which is referred in the similar thread Document type not defined f5814

Parsing custom document types e.g PDF, JPEG etc

Hi,
If I need to parse custom document types as I mentioned above how do I extract attributes since the documents are not structured and unlike XML there are no tags.
Thanks
KM

And as I said before, you have to know the format of the file to parse it.
PDF, PS, XLS, DOC, TIFF, JPEG, GIF, etc. are all binary files that have proprietary formats. Some are documented (JPEG, GIF, PS, for instance), others are not (DOC, XLS, for instance).
The world is moving to XML and other text-based formats because they are open standards -- they are easier to parse and more interoperable with disparate applications.

Backened documents are not getting updated in Classic Scenario

Hi,
We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
Is there any business functions to be activated.

Hi Sunil,
You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
Best Regards,
Anu
Edited by: Anuradha UG on May 18, 2010 8:09 PM

B2B Custom Document Type not getting identified

Similar Messages

Maybe you are looking for