B2B : Hub trading partner model
Dear All,
We are facing an issue while using the hub model.
Use case :
1# We need to send an EDI 850 document from TP1 and TP2 to TP3.
Source : TP1 , TP2
Target : TP3
We configured the agreements between following.
TP1 --> host TP --> TP3
TP2 --> host TP --> TP3
The files are getting generated successfully.
But we could not have the Source TP name in the ISA segment from TP value. We see the HiostTrading partner name.
What configuration change we need to do , So that TP1 / TP2 name will be shown in generated ISA segment fromTP element.
Thanks in advance.
Siddhardha.
Hi Naresh,
As of now only directory name (leaf folder) or filename can be used for TP identification in case of File/FTP (except EDI). If your use case does not allow any of these, then please file an enhancement request with support.
Regards,
Anuj
Similar Messages
-
Oracle Wallet manager password for B2B Host trading partner
Hi All,
I have exported one trusted certificate from B2B midtier wallet manager.
I have saved it as ora_wallet.txt and and oracle.tip.adapter.b2b.WalletLocation refers to its path.
I associated host trading partner delivery channel with non-repudiation and encryption.
Now I need to provide wallet manager password for host trading partner in B2B UI.
I am providing the password which I used while creating the certificate.
I am getting following error:
An error occurred when updating the trading partner.
Error -: AIP-16001: The model validation engine failed due to an internal system error.
As a second trail I exported user requested certificate from wallet to B2B but same error
Where I am doing wrong ?
ThanksHai Ramesh,
I did the setup described by you in the last post and I pushed an outbound payload.Fortunately previous error was gone
Now I am getting following error in log file
Error -: AIP-50025: Repository error
at oracle.tip.adapter.b2b.init.Repository.readCertificates(Repository.java:1060)
at oracle.tip.adapter.b2b.init.Repository.initExchange(Repository.java:487)
at oracle.tip.adapter.b2b.init.Repository.initialize(Repository.java:557)
at oracle.tip.adapter.b2b.init.B2BServer.readRepository(B2BServer.java:432)
at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:164)
at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:217)
at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:104)
Thanks
Praveen -
Agreement lookup failed as From trading partner cannot be identified
Hi,
I am working on custom document over HTTPS.
I configured B2B to send custom document over Generic Exchange(transport - HTTPS).
I enqueue the XML document with AQ header to IP_OUT_QUEUE. B2B is able to read the data from IP_OUT_QUEUE and invokes the client Webapplication.
I changed the IP_OUT_QUEUE to custom AQ. B2B is able to read data from custom AQ, but B2B throws "Trading partner agreement lookup failed as From trading partner cannot be identified"
b2b.log:
2010.02.15 at 13:03:44:470: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.02.15 at 13:03:44:471: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.02.15 at 13:03:44:497: Thread-22: B2B - (DEBUG)
Protocol = AQ
Version = null
Transport Header
aq.receiver.expiration:-1
aq.receiver.delay:0
aq.receiver.priority:1
aq.receiver.correlation:b2buser
2010.02.15 at 13:03:44:881: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.02.15 at 13:03:44:907: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
2010.02.15 at 13:03:44:921: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
2010.02.15 at 13:03:45:069: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppInterfaceListener:onMessage calling processOutgoingMessage
2010.02.15 at 13:03:45:069: Thread-22: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Enter
2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.02.15 at 13:03:45:071: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.02.15 at 13:03:45:076: Thread-22: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage To TP Namenull
2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage From TP Namenull
2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage business action name: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype name: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype revision: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage AppMsgIdnull
2010.02.15 at 13:03:45:094: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage ipmsg.get_MSG_TYPE = 1
2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: null Type: null Value: null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2B Message ID is 0A4DBD67126D1BA2FC700000136A1AD0
2010.02.15 at 13:03:45:099: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage RefTo B2B Message ID is null
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage isSignalMsg() == false; call outgoingTPA
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processOutgoingTPA() Begin TPA Processing..
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: null Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: null Type: null Value: null
2010.02.15 at 13:03:45:101: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is outgoing
2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty with : TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: Acme Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:113: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: null docTypeRevision: null
2010.02.15 at 13:03:45:118: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: null actionRevision: null
2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Set actionRevision in MessageInfo: null
2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Obtain DocType using actionName and actionRevision.
2010.02.15 at 13:03:45:124: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : null Activity Version: null
2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<null>
2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2010.02.15 at 13:03:45:126: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: Acme Type: null Value: null to TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2010.02.15 at 13:03:45:129: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-Acme-null To Party -> null-null-null-null Business Action name -> null
2010.02.15 at 13:03:45:130: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
2010.02.15 at 13:03:45:131: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
2010.02.15 at 13:03:45:131: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.02.15 at 13:03:45:209: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
2010.02.15 at 13:03:45:211: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2010.02.15 at 13:03:45:212: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2010.02.15 at 13:03:45:353: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
2010.02.15 at 13:03:45:354: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2010.02.15 at 13:03:45:367: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2010.02.15 at 13:03:45:397: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.02.15 at 13:03:45:398: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2010.02.15 at 13:03:45:471: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2010.02.15 at 13:03:45:476: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notifying App
2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.15 at 13:03:45:485: Thread-22: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A4DBD67126D1BA2FC700000136A1AD0</b2bMessageId>
<errorCode>AIP-50548</errorCode>
<errorText>Trading partner agreement lookup failed as From trading partner cannot be identified</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgda21a)
Description: Make sure the trading partner has name, type, and value information
StackTrace:
Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2010.02.15 at 13:03:45:512: Thread-22: B2B - (DEBUG) Engine:notifyApp Exit
2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) DBContext commit: Enter
2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Leave
Kindly help me to resolve this issue.hi Anuj,
I am enqueuing from BPEL process. I have set the AQ header.
<b2bMsgHeader><Header xmlns="http://xmlns.oracle.com/pcbpel/adapter/aq/publishB2BMessage/">
<QueueHeader/>
<PayloadHeader>
<MSG_ID xmlns="">2SY16SY_TEST_FEB15_07E01null2010021513270041</MSG_ID>
<INREPLYTO_MSG_ID xmlns=""/>
<FROM_PARTY xmlns="">Acme</FROM_PARTY>
<TO_PARTY xmlns="">GlobalChips</TO_PARTY>
<ACTION_NAME xmlns="">ProcessBusiness</ACTION_NAME>
<DOCTYPE_NAME xmlns="">DocType</DOCTYPE_NAME>
<DOCTYPE_REVISION xmlns="">1.0</DOCTYPE_REVISION>
<MSG_TYPE xmlns="">1</MSG_TYPE>
<PAYLOAD xmlns="">XML payload</PAYLOAD>
<ATTACHMENT xmlns=""/>
</PayloadHeader>
</Header>
</b2bMsgHeader> -
B2B integration with just one trading partner using a dedicated VPN channel
Hi colleagues,
We are working in a B2B integration escenario, where our company will just integrate with a service provider using a dedicated VPN channel, so we won't go out to internet, for that B2B communication we have identified 10 inbound + 9 outbound interfaces.
Do we need to look into implemeting an document exchange protocol for that? Of course we need some ACK mechanism as there'll be SLAs in place. If so, what would it be the most appropiate? I've been reading about ebxml, rosettanet etc but still not very clear for me which level of customization you'll need in order to apply those protocols. If this is much and given the fact that we are just dealing with a trading partner and we won't scale this platform to use more parther in the future, would it be worthy to customize our own ACK mechanism?
If relevant, in our side we use oracle fussion middleware, the trading partnel is using SAP IS-U. The message format will be standard XML, we haven't identified the need of any other formatting at the moment such EDI.
I know this is a very open question, so any advices or recommendations on that are highly appreciated.
Regards,Hello Dipal,
There is a lilttle catch. Eventhough your Delivery channel which is used in the agreement for a specific trading partner specifies some IP/Port, you can dynamically send the message to some other IP as well. This is specified in the document.
This will give a flexibility of sending the HL7 message not just to the end point which is mentioned in the agreement but also to any othere ip/port as driven by the ACTION_NAME field in the IP_MESSAGE type. However ACTION_NAME filed overrides the delivery channel information, hence at any point of time you can
1. Send a message to the end point mentioned in the delivery channel and used in the agreement. In this case ACTION_NAME is null or
2. Any dynamic end point driven by the ACTION_NAME.
Hope this is clear.
Rgds,Ramesh -
B2B 10g AIP-50547: Trading partner agreement not found
Hi.
Request woks greate but I have a problem with response from my trading partner.
Error message:
Error -: AIP-50031: B2B adapter general error: Error -: AIP-50025: Repository error : Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "null", To party[NAME] "null", Business action name "action"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2022)
at oracle.tip.adapter.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:439)
at oracle.tip.transport.basic.HTTPReceiver.sendRequest(HTTPReceiver.java:447)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Thanks for any help!
Happy new year :)Happy new year!! :)
Are you working with ebMS? If yes, make sure that your partner is also setup with that. Please paste the complete packed wire message here.
Regards,
Anuj -
B2B SelfService Error creating Trading Partner .zip import file using ant
SOA 11g 11.1.1.5 B2B - We are trying to create an import file for out trading partners into SOA B2B 11g but are getting errors when we run the ant script to build the import zip file.
We ran the ant-b2b-util to get the b2bselfservice.xsd file, loaded that into jDev to show the selfservice.xml structure.
We have built a trading partner xml file and at this point have stripped it down to one TP just to see if we could get it to work and we keep getting the same error messages.
From the $SOA_ORACLE_HOME/bin directory (where we have placed our TP xml file: TPD_NA.xml) here is the command and results from running the ant script:
[oracle@nalinoap05 bin]$ ant -f ant-b2b-util.xml b2bselfservice -Dinput=$ORACLE_HOME/bin/TPD_NA.xml -Doutput=$ORACLE_HOME/bin/TP_Docs.zip
Buildfile: ant-b2b-util.xml
b2bselfservice:
weblogic_dependencies:
[echo]
[echo] Weblogic server location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/wlserver_10.3
[echo] JNDI properties folder location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin
[echo]
verifyargs:
utility:
[echo]
[echo] java.naming.provider.url=${java.naming.provider.url}
[echo] java.naming.factory.initial=${java.naming.factory.initial}
[echo] java.naming.security.principal=${java.naming.security.principal}
[echo] java.naming.security.credentials=*****
[echo]
[echo]
[echo] args=selfservice
[echo]
[java] Commandline arguments 1: [selfservice]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Input file location(s) :[oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TPD_NA.xml]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Output file location :/oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TP_Docs.zip
[java] 2012.04.10 at 13:27:35:596: main: (INFO) TradingPartner created :/soa/b2b/tp_id1AC191488133.xml
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=852 docDef=852Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=850 docDef=850Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=860 docDef=860Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=856 docDef=856Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=810 docDef=810Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:691: main: (SEVERE) TPD_NA.xml: Error in Validation:
[java] [org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef']
[java] Java Result: 255
BUILD SUCCESSFUL
Total time: 1 second
Here is the contents of TPD_NA.xml:
<?xml version="1.0" encoding="UTF-8"?>
<SelfService xmlns="http://xmlns.oracle.com/integration/b2b/selfservice/profile">
<TradingPartners>
<TradingPartner hosted="false" name="OvvvvvvvX" >
<Identification name="EDI Interchange ID" value="18xxxxxxxxxX" />
<Identification name="EDI Interchange ID Qualifier" value="14" />
<Identification name="DUNS" value="18xxxxxxxxxX" />
<Identification name="Generic Identifier" value="18xxxxxxxxxX" />
<Identification name="AS2 Identifier" value="18xxxxxxxxxX" />
<SupportedDocumentDefinition initiator="true" docTypeName="852" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="852Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="4010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="850" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="850Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="860" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="860Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="856" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="856Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="810" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="810Def" />
</TradingPartner>
</TradingPartners>
</SelfService>
We have exported our metadata and looked at the doc_EDI_X12.xml file and ALL of these referenced documents exist in that file and can be seen by going to Administration --> Document and under the Document Protocols navigation --> EDI_X12 --> 5010 --> 810 --> 810Def (as an example).
If we strip out all of the SupportedDocumentDefiinition lines then the ant script will build an import file with just the trading partners and Identifications.
What are we doing incorrectly or what is not working properly to get the ant script to build the import zip file??
Thanks for any assistance,
KenDoes that mean we have to create all of the document type definitions in the selfservice file?
We have created (installed) all of the document types by installing them from the B2B Administration --> Document page.
The definitions in the Trading Partner xml file exactly match the definitions of the installed documents.
In the selfservice.xsd the <element> SelfService shows the profile:DocumentProtocols as minOccurs as 0 :
<element name="SelfService">
<complexType>
<sequence>
<element minOccurs="0" maxOccurs="1"
ref="profile:DocumentProtocols" />
<element minOccurs="0" maxOccurs="1"
ref="profile:TradingPartners" />
<element minOccurs="0" maxOccurs="1"
ref="profile:Agreements" />
</sequence>
<attribute name="version" type="profile:non-empty-string"
use="optional" />
</complexType>
</element>
so we thought that since the documents had already been defined (created/installed) to B2B they would not have to be redefined in the selfservice xml.
If we have to define all of the document types in the selfservice xml file that we are using for the trading partners what are the minimum values that we need to include?
Could we use minimal definitions such as this:
<DocumentProtocols>
<DocumentProtocol name="EDI_X12">
<DocumentProtocolVersion name="4010">
<DocumentType name="850">
<DocumentDefinition name="850def" />
</DocumentType>
<DocumentType name="997">
<DocumentDefinition name="997def" />
</DocumentType>
</DocumentProtocolVersion>
</DocumentProtocol>
</DocumentProtocols>
before the <TradingPartners> section of the seflxervice xml file?
Thanks for your assistance! -
B2B Trading partner identification
We have the following scenario:
1. Trading Partner sends X12 PO 850 ( one Interchange ID) But at our side we have multiple Interchange ID's . So file comes from single customer ( single sender ID) but having multiple Receiver ID's.
So is this true that only way to handle this is to create multiple Partners in Oracle B2B and attach Sender Receiver ID's on aggrement?
I tried above option but B2B is not able to identiify TP based on SENDER RECEIVED ID combination. We have b2b.edi.identifyToTP =true.
Error Code B2B-50549
Error Description Machine Info: (xyz.americas.com) Description: Cannot uniquely identify a trading partner. The trading partners CA_SEARS, SCA_SEARS have the same set of identifications.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Cannot uniquely identify a trading partner. The trading partners CA_SEARS, SCA_SEARS have the same set of identifications
Vijay.Now problem is with outbound.... we need to send outbound docs to different channels for same Tp based on our different Sender ID's. So I thought to create 2 different tp is B2B and use seperate channels for both.Ok. If I understood it correctly, then in your scenario you have to send same document (doctype and docrevision) to same TP on different URL's based on your different sender ID's. If this is the case then definitely you have to have two remote TP's in your B2B configuration but both remote TP's should use different receiver ID's (your TP should have two interchange id's).
What happening currently is that you have created two separate TP's but both of them are using same interchange id's which is not possible in B2B scenario. All TP's must have unique Interchange ID's
Regards,
Anuj -
How to generate cXML response for a Trading Partner in Oracle B2B 11g
We have a requirement to generate a cXML response whenever there is an inbound message posted from a trading partner to our B2B servlet. Can the response be directly generated in B2B integration layer and sent back to the partner?
Messages(cXML) will be exchanged as Custom document using HTTPs protocol.Thanks for the response.
Can you please explain how you used custom cXML in the Ack. What document protocol was used.
Thanks! -
Oracle B2B 10g Remote Trading Partner Configuration
Hi All,
How to create a Business Action in operational capabilities of remote trading partner for the exchange of custom xml document betwenn trading partners.
Also please suggest any document where we can follow the steps for creating trading partner for custom xml exchange.
Regards,
Jagadesh.You may like to refer -
http://www.b2bgurus.com/2007/12/how-to-handle-hosttrading-partner-with.html
Multiple "HOST-partner" configuration possible?
Regards,
Anuj -
AS2 and Trading Partner Identification for MDN
Hi,
I have a scenario where I have multiple Trading Partners that all use the same hub provider. I have setup the trading partners individually in B2B so the trading partner can be identified regardless of the transport server endpoint.
For inbound documents I use the 'Identifying XPATH Expression" and "Identification Value" to override the default Document Definition so I can see which Trading Partner the Invoice is from, regardless of the hub provider that sent it. This is working fine.
However, when sending outbound documents such as a Purchase Order the ourbound document is shown correctly :-
HealthCorporateNetworkWA BBraunAustraliaPtyLtd AS2 - 1.1 GS1_MultishipmentOrder_Doc - 2.5 GS1_MultishipmentOrder_Action Complete 30 March 2009 10:07:54
Whereas when the MDN is returned it is identified as another trading partner :-
BaxterHealthcarePtyLtd HealthCorporateNetworkWA AS2 - 1.1 GS1_MultishipmentOrder_Doc - 2.5 Acknowledgement Complete 30 March 2009 10:07:59
These are 2 seperate agreements that are deployed and I assume that the b2b instance is simply identifying the appropriate Trading Partner Agreement by the AS2 Identifier only ?
Is there anyway to modify this behaviour ? Obviously I want it to indicate that the MDN is coming from the Trading Partner I sent the PO to ? If I got the hub provider to apply a AS2 Custom Header would I be able to use this instead by adding a new Trading Partner Identification Type and then using that as the identifier in the TP Agreement ?
Given the MDN is a synchronous response, why isnt it associated with the same TP Agreement ?
Any ideas ?You are using custom over AS2 business protocol where in the identification of trading partner can only be based
on the Exchange which is by AS2 identifier. The identification of Agreement is happening in the document layer which is nothing to do with whether the Acknowledgement is Sync/Async.
Ideally you should create the agreement between host and hub provider -
Couldn't create Trading partner
Hi
I am creating Trading Partner, but not able to proceed further.It was working fine.Suddenly it is not working.
1. Clicked on Trading Partner tab, clicked on create.
2. Gave the name and clicked next, then again next(Idenitication section)
3. Selected EDI X12 over Generic Exchange Protocol, then nothing is displyed. blank page is displayed.
I don't want to reinstall B2b,
Could you please tell me what is the problem.
Or Could you please tell me to get the logs for the operation we do while configuring in Oracle B2B so that I can know what is happening.
I have given debug level as DEBUG for
oracle.tip.DiagnosticLevel = DEBUG
b2b.oracle.tip.DiagnosticLevel = DEBUG
b2b.oracle.tip.DiagnosticLevel.UI = DEBUG
ui.oracle.tip.DiagnosticLevel = DEBUG
ui.oracle.tip.DiagnosticLevel.UI = DEBUG
But still I am not gettign any logs for this particular operation.
Thanks,
PraveenaHi
I am gettign the below exception in my ui.log
14:18:20:331: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Unable to get property - CurrentDesc
2009.03.04 at 14:18:20:331: AJPRequestHandler-ApplicationServerThread-6: UI - (ERROR) In getVersionOnly()
2009.03.04 at 14:18:22:314: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Getting LoginData from isLoggedIn()
2009.03.04 at 14:18:22:324: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Getting LoginData from isLoggedIn()
2009.03.04 at 14:18:22:384: AJPRequestHandler-ApplicationServerThread-6: UI - (ERROR) In getVersionOnly()
2009.03.04 at 14:18:28:220: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Getting LoginData from isLoggedIn()
2009.03.04 at 14:18:28:230: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Getting LoginData from isLoggedIn()
2009.03.04 at 14:18:28:370: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Unable to get property - collaboration_name
2009.03.04 at 14:18:28:380: AJPRequestHandler-ApplicationServerThread-6: UI - (ERROR) In getVersionOnly()
2009.03.04 at 14:18:52:797: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Getting LoginData from isLoggedIn()
2009.03.04 at 14:18:52:817: AJPRequestHandler-ApplicationServerThread-6: UI - (DEBUG) Getting LoginData from isLoggedIn()
2009.03.04 at 14:18:52:887: AJPRequestHandler-ApplicationServerThread-6: UI - (ERROR) Error occurred during IPBaseList query() -
2009.03.04 at 14:18:52:897: AJPRequestHandler-ApplicationServerThread-6: UI - (ERROR) Error -: AIP-11015: Object does not exist B9DC7135A80D4CB2A3EE3BD06AD7EF64-256-1
at oracle.tip.repos.core.driver.InternalObject.getAssociation(InternalObject.java:690)
at oracle.tip.repos.core.persistency.BaseObject.getAssociation(BaseObject.java:388)
at oracle.tip.model.b2b.protocol.DocumentType.getDocumentProtocolRevision(DocumentType.java:242)
at oracle.tip.tools.integration.buslogic.b2b.collaboration.BusinessActionLOVForBP.executeQuery(BusinessActionLOVForBP.java:80)
at oracle.tip.tools.integration.data.IPBaseList.query(IPBaseList.java:324)
at oracle.tip.tools.integration.data.IPDataHandler.<init>(IPDataHandler.java:117)
at oracle.tip.tools.integration.data.IPBaseList.<init>(IPBaseList.java:105)
at oracle.tip.tools.integration.data.IPBaseLOV.<init>(IPBaseLOV.java:59)
at oracle.tip.buslogic.ui.b2b.collaboration.BusinessActionLOV.<init>(BusinessActionLOV.java:53)
at oracle.tip.tools.integration.buslogic.b2b.collaboration.BusinessActionLOVForBP.<init>(BusinessActionLOVForBP.java:51)
at oracle.tip.buslogic.ui.b2b.collaboration.CollaborationDataProvider.createExtendedObject(CollaborationDataProvider.java:122)
at oracle.tip.buslogic.ui.b2b.collaboration.CollaborationDataProvider.getDataObject(CollaborationDataProvider.java:95)
could you please tell me what is the problem with this? -
Error -: AIP-16012: Parameter: trading Partner is unique for object Trading
Hi Gurus,
When I go to rename the b2b server under trading partners, I receive the following error:
An error occurred when updating the trading partner.
1. Error -: AIP-16012: Parameter: trading Partner is unique for object Trading Partner Identification
2. TradingPartner.TradingPartner - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
3. PartyIdentificationType.TradingPartnerIdentificationType - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
4. Value - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOL
This occurs after I purge the b2b and even manually delete the trading partner that has the name that I require to change the server to (required for quality assurance testing). When I check the identifiers, there are two name ones (one of them is the one I am trying to change to) but I cannot delete any of them as it is grayed out.
Any thoughts?
Thanks
Gerald
Edited by: Gerald M. on Nov 30, 2009 8:50 AM -addtional infoSolved the issue, I manually delete entries in b2b.tip_tradingpartneriden_aud and b2b.tip_tradingpartneridentifica_t.
Is this safe to be doing this?
Thanks
Gerald -
AIP-52251: Error identifying remote trading partner at MLLP Exchange with
used HL7 over MLLP, one trading partner is EAI(B2B Localhost), another is EchoServer(a java application, the hostname is is4-nb4.corp.ha.org.hk). used a script to enqueue message. like below:
DECLARE
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
msg_handle RAW(16);
ipmsg b2b.IP_MESSAGE_TYPE;
xml_clob clob;
msg_id number(10);
subscribers dbms_aq.aq$_recipient_list_t;
BEGIN
select message_seq.nextval into msg_id from dual;
xml_clob := '<?xml version="1.0" ?><ADT_A01 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="HL7" Version="2.3.1" CreatedDate="2005-08-16T16:52:26" CreatedBy="ECXEngine_826" GUID="{1A2726C6-B00E-DA11-8F7A-080020C8D296}"><MSH><MSH.1>|</MSH.1><MSH.2>^~\&</MSH.2><MSH.3><HD.1>EDI</HD.1></MSH.3><MSH.4><HD.1>PWH</HD.1></MSH.4><MSH.5><HD.1>EchoPac</HD.1></MSH.5><MSH.6><HD.1>PWH</HD.1></MSH.6><MSH.7><TS.1>20050804162010</TS.1></MSH.7><MSH.8 xsi:nil="true"></MSH.8><MSH.9><MSG.1>ADT</MSG.1><MSG.2>A01</MSG.2></MSH.9><MSH.10>TEST007</MSH.10><MSH.11><PT.1>#Property(ProcessingID)#</PT.1></MSH.11><MSH.12><VID.1>2.3.1</VID.1></MSH.12><MSH.13 xsi:nil="true"></MSH.13><MSH.14 xsi:nil="true"></MSH.14><MSH.15>AL</MSH.15><MSH.16>ER</MSH.16><MSH.17>#Property(CountryCode)#</MSH.17><MSH.18>ASCII</MSH.18><MSH.19><CE.1>ENG</CE.1></MSH.19></MSH><PID><PID.1>1</PID.1><PID.2 xsi:nil="true"></PID.2><PID.3><CX.1>A0000010</CX.1></PID.3><PID.4 xsi:nil="true"></PID.4><PID.5><XPN.1><FN.1>TEST, Patient 01_10</FN.1></XPN.1></PID.5><PID.6 xsi:nil="true"></PID.6><PID.7><TS.1>20001001</TS.1></PID.7><PID.8>F</PID.8></PID><PV1><PV1.1>1</PV1.1><PV1.2 xsi:nil="true"></PV1.2><PV1.3 xsi:nil="true"></PV1.3><PV1.4 xsi:nil="true"></PV1.4><PV1.5 xsi:nil="true"></PV1.5><PV1.6 xsi:nil="true"></PV1.6><PV1.7 xsi:nil="true"></PV1.7><PV1.8 xsi:nil="true"></PV1.8><PV1.9 xsi:nil="true"></PV1.9><PV1.10 xsi:nil="true"></PV1.10><PV1.11 xsi:nil="true"></PV1.11><PV1.12 xsi:nil="true"></PV1.12><PV1.13 xsi:nil="true"></PV1.13><PV1.14 xsi:nil="true"></PV1.14><PV1.15 xsi:nil="true"></PV1.15><PV1.16 xsi:nil="true"></PV1.16><PV1.17 xsi:nil="true"></PV1.17><PV1.18 xsi:nil="true"></PV1.18><PV1.19><CX.1>10010</CX.1></PV1.19></PV1></ADT_A01>
subscribers(1) := SYS.AQ$_AGENT('b2buser', null, null);
message_properties.RECIPIENT_LIST := subscribers;
ipmsg := b2b.IP_MESSAGE_TYPE (msg_id, null,'EAI','EchoServer','Echo_ADTA01_Process', 'ADT_A01', '2.3.1', 1, xml_clob, null);
dbms_aq.enqueue(queue_name => 'b2b.IP_OUT_QUEUE',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => ipmsg,
msgid => msg_handle);
commit;
END;
show errors;
then go to the B2B Report tab, can see two message like below
EAI EchoServer MLLP - 1.0 HL7 - 2.3.1 Echo_ADTA01_Process WaitFA 2007年11月12日 星期一 下午05:51:37
Acknowledgement Invalid 2007年11月12日 星期一 下午
and in the log file, like this:
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage Could not find a Trading Partner with MLLP ID = is4-nb4. Please check the Trading Partner Identification section of your Trading Partner
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:247)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage identify trading partner by MLLP Id failed for is4-nb4 with ExceptionError -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:257)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {From=is4-nb4, FromIP=160.19.23.102, FARequired=true, protocolVersion=1.0, ToIP=160.19.55.114, Port=4911, Message-Id=1194861102002-1207274363, protocol=TCP, To=is4wingw02}
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning true
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error Set
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA processed by HL7
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Not creating an ACK for an incoming ACK Message
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA B2BMessage is null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Exit
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA Sent
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum not null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = 1194861102002-1207274363
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>A0133772116334587C90000068CD8000</b2bMessageId>
<errorCode>AIP-52251</errorCode>
<errorText>Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4</errorText>
<errorDescription>
<![CDATA[Machine Info: (is4wingw02)
Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
here said not find the remote partner, but in B2B server, can ping Echoserver.
what is wrong?Hello again,
I have tried all different combinations with the IP addresses and host names, but to no avail. Then I changed the Trading Partner Identification Type from MLLP Id to Sending Application (one of the customer requirements is to be able to identify the Trading Partner by the combination of Sending App/Sending Facility, since they are running multiple HL7 applications on one host). However, I still see the same error in the log file - for some reason, B2B is still trying to identify the Trading Partner by the MLLP Id. Redeploying the configuration didn't help, the requested identification type is ignored.
Please help! If needed, I can send the B2B log file, but maybe I'm missing something obvious.
BTW, the customer has installed the patch for bug 6439217 on October 10th. The B2B version is 10.1.2.2.0.
Thanks in advance! -
Trading Partner - AP Line Items
Dear Friends,
Does any one know how to extract " Trading partner - AP Line items" information in to BW.Basically I want to report on List of transactions for vendors with in a selected period.
I am grateful to your cooperation.
Thanks,
SBMay I suggest yout alk to your FI guy as unless you are using segmented ledgers their is no 1:1 relationship between
Internal Ord Number
WBC group
Purchasing doc Number
Cost Centre
Profit Centre
And the AP document..
ie an AP invoice can be for many cost items each cost item can have it's own profit centre, PO number and IO/WBS element dependant on FI config
If the real question is how do I analyse cost by Vendor for all PO non PO spend then that is a different story and involves a lot of ABAP and modelling and FI/CO knowledge to flatten the FI journal within BW(see my previous notes on theis topic)
Or do they want to see Trading Partner against the cost items (if that's the case have a look at the GL extractors in RSA3 for a few sample documents to see if PCOMPANY is filled against the P&L and Balance Sheet lines
(now you might understand why I employ on my projects function specific BW consultants) -
Trading partner agreement not found
Hi,
Can anyone help me resolving the below error:
Trading partner agreement not found for the given input values: From party[TYPE-VALUE] "Generic Identifier-10.22.110.110", To party[TYPE-VALUE] "Generic Identifier-*.*.*.*", Business action name "PRC_EDI_X12_850_4010"; also verify agreement effectiveToDate
I am trying to submit an EDI 850 document to the b2b/transportServlet through a client program. The business protocol I am using is EDI X12 over Generic Exchange (HTTP 1.1).
Thanks.Hi,
Thanks when I put the actual IP addresses it worked. Now I have few questions, it would be great help if you could answer them.
1. The machine where B2B Integration is installed has been assigned with multiple IP addresses. Only the first two set of numbers are same and the last two numbers are different. For example : 10.90.12.80, 10.90.18.22. Therefore for the host partner if I need to assign the Generic Identifier which IP do I need to choose? Also which IP I should be using for the Transport Server?
2. I want to accept all the cXML ORDER messages sent by all trading partners(TP) to resolve one TP in B2B Integration. We are going to lookup the TP in our BPEL process, so we only need the B2B integration to validate the document sent in . Therefore all the four subnets in the IP address may vary. In this case I cannot use a IP address therefore how can I specify the Generic Identifier? Or is there any different method I can use?
3. I receive my cXML punchout from my trading partners from different countries, for example say Italy and France. The trading partner id is same but the country from where the punchout originated is different. I don’t have any other field in the message to determine which country the order originated from but I need to figure out the country code some how. In current implementation we have different URL for each country to resolve the country code. How can I do this in B2B Integration tool?
4. Is there a way to Dynamically change the URL that a Delivery channel is supposed to send to? If a customer changes the URL that a document is supposed to go to, can we change this on the fly?
Maybe you are looking for
-
How to change the values in an LOV based on values selected in another LOV
Hi, I have a requirement in ADF where there are two LOVs. Based on the values that I select in the 1st LOV, the values in the second LOV should change dynamically. Also, the 1st LOV accepts 3 values, for every value I select, a different query is exe
-
Line-in mic doesn't work; both preferences selected
I can't get a Line-in microphone to work on imovie VO, or elsewhere. I've selected Line-in on both the Personal Preferences and the preferences on imovie. And I've tried two different new microphone headsets. Can someone please tell what I'm doing wr
-
I need to update to o sx 10.5, I can't find it anywhere?
I got my self a new iphone 4 and had to update my itunes, but to do this I have to update to os x 10.5. My update can't find it and I can't find it to down load it. I'm stuck at the moment and can't get the most out of my iphone with it not synced up
-
No seperate albums created when importing folders containing photos
Hi ... Need some help here please.. When importing folders containing photos in iPhoto each folder would be made into an Event. When I do the same with Photos all my pictures are placed into Albums - All Photos. No separate Albums are made for each
-
HT4623 There is no update in my settings
IOS update