Back and forth with two finger in folders does not work

It is sad, that back and forth with two fingers does not work in Itunes, Folders, or somewere else than in Safari. You can put the settings back thwo three fingers but than you cannnot mark text with three fingers. It would be nice just to use two finger everywher to go back an forth

Would be nice positive posts too ..

Similar Messages

  • Typically, How many back and forths with Creative Support before they acknowledge your questi

    Typically, how many times does one have to go back and forth with Creative Support before they acknowledge an issue or question?
    This is ridiculous.
    I'm on the forth reply now.
    All I want to know is if there is a?64-bit ASIO driver for the X-Fi Titanium on 64-bit Vista?
    They will not answer me.
    All of my testing indicates that there is not a 64-bit ASIO driver for Vista, but they will not confirm or deny.
    :angry:

    dRe: Typically, How many back and forths with Creative Support before they acknowledge your question?U I don't know what Creative would have written if you asked SUpport these days?
    I assume, they lied when they wrote this. There are several walkarounds for XFI cards
    with beta drivers. In releas drivers they exclude the ASIOx64, but in beta it's included!
    Creative has a very awkward marketing strategy. This was with Vista not having EAX on Audigy as
    the said it is impossible. The newer X-FI was able to?do it and after a few weeks the Audigy also could-
    after paying for it. The same with DolbyDigital Li've... and now with x64 ASIO. They reduce features
    in cases the cheaper card had same possibilities as the more expensi've EMUs...
    Shame on them. I?baught a creative Card for the 4th time (SB, SB AWE32,Audigy2, and now Titanium).
    I'm going to thinking about selling it...

  • How do I temporairily stop using Fire Fox? I'd like to switch back and forth with IOE.

    When I first got FF, I had to click on the icon to turn it on. That was great. Now it seems to have taken over as my only operating system. I'd like to be able to switch back and forth with IE as I have lots of info located on the hard drive in places which seem easier to get to with IE. When I turn off my computer I click on the FF icon and turn it off, but to no avail. Not only is it there when I start up my machine again, it has saved some of the items which I worked on prior to shuting it down. It's becoming a real pain!!!!

    Just open Internet Explorer! You can even use Firefox and IE at the same time, if you care to - Firefox doesn't stop you from using another browser, either ny itself or when Firefox is running.

  • Mult accounts and since I upgrade to 15 fire fox. I can not use. my family We can not open accounts with : multifox 1.3.3 does not work the second person .

    hello,
    I have 2 lab tops.. and have family members that use them.. I used to have FB open with mult family members accounts. Ad of today you updated to firefox 15..
    Now when I go to use multifox 1.3.3 ( that is so you can have mult accounts open. ) .. if trying to go into Fb none of the features work. now since I have upgrade. it use to work fine.
    So, the new FF does not work would like to unistall and go back to the old FF.. where I, can have mult accounts open at the same time and have the funcation work when your on the mult account in FB... Like talk to some one in FB chat. or just look at other items in the accounts.
    if you can tell me how to fix this or can you please give me the old link back.. or tell me how to get the old link back instead of 15.. Because 15 does not work.
    Thanks

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.  What should I do

    I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
    What should I do?

    Hi Anto2211,
    Please follow the thread: Black screen CC where this issue is already discussed and resolved.
    Let me know for any further query.
    Thanks,
    Ratandeep Arora

  • HT1296 i changed my laptop and install a new itunes on it, the usual basic i authorized my new laptop and downlad applications on it but my i tunes does not sync with my ipod i alreadt reinstall and downloaded all the application still it does not work pl

    i changed my laptop and install a new itunes on it, the usual basic i authorized my new laptop and downlad applications on it but my i tunes does not sync with my ipod i alreadt reinstall and downloaded all the application still it does not work please me...tnx

    anyone please help!!!tnx

  • HT4623 i updated my ipad with ios7 but the keyboard does not work as it should hit the letters it is slow and does not click as it should

    updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it

    Settings>General>Reset>Reset All Settings

  • Finger print reader does not work

    i followed the directions and my print was scanned, rescanned,and the edges were scanned and accepted but the reader does not react when the phone is locked....i deleated and rescanned and followed all directions which accepted my finger print....once again thereader does not unlock the phone...any suggestions?

    I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

  • I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

    Question.
    I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
    Thank you,
    Loïc

    Accordion or Tabbed panel should to it, with click and open container.
    Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
    Thanks,
    Sanjit

  • Im tryting to install new itunes but says windows installer, you are tring to use is a network resource that is unavailable. find folder itunes.msi  i dont have a folder like that and anything i use that is related does not work. help me?

    "you are tring to use is a network resource that is unavailable. find folder itunes.msi" i dont have a folder like that and anything i use that is related does not work. ive tryed to uninstall but still does the same thing when.

    Should the advice above not fix things for you...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

    I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
    so i'm using the usb mouse

    I want to clarify the issue.
    The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
    With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
    Post here with your results!!

  • Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work.  Also, when I try and browse songs, everything is blank

    HELP!
    Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work.  Also, when I try and browse songs, everything is blank

    It's been a while but it should work on a Mac because Macs can read Windows formatted devices. Otherwise, you can perform a restore operation to return it to the Mac format. If you go to support.apple.com/manuals/ you can find a copy of the user manual for the model you have in which this is all explained.

Maybe you are looking for

  • Need Help on Master Data

    Hi      I have 2 questions : 1.  We have a cube which is getting lot of requests with 0 records (as the start routine is filtering by cond type) and also we have some requests getting the data with some values but most of the rows are 0's. Our report

  • Address Book: Importing Multi-Line Fields

    A common and often unavoidable import format for Mac Address Book is Comma Separated Value files (.csv). Address Book cannot import CSV files that have multi-line fields, such as might be included in Notes, because it cannot tolerate embedded newline

  • How to open a pdf without it in code?

    I need ot open a pdf file for my online class but it is only opening up as pages of code? Text editor always opens up when I click on it but I dont want it! Is there a problem with the website im recieving the pdf files from or is there something wro

  • OMNI portlet preference store issue

    Hi, Application is running on Staging environment and I want to move it to UAT clustered environment. Portlet application as well consumer application (Portal) deployed successfully. After that I have run persistancemigration tool for WSRP portlet pr

  • How to use HttpServletResponse() ?

    Dear sirs... consider the following code: public class DataPage1Action extends DataForwardAction public void onAa(DataActionContext ctx) ctx.getHttpServletResponse().setContentType("text/txt"); try ctx.getHttpServletResponse().getWriter().write("this