Back-up to Lacie external drive

I am monitoring a project using 2 cameras. Have been combining the rolls in iPhoto into 1 roll with dates. When I try to transfer the images to a folder created in the finder, repeatedly I'm told for example that jpg1 already exists and I cannot move another image also being a jpg1 into the folder.
Sure hope there is a solution to this for I must get these image backed up on an external drive.
Thanking you in advance.
Jack

Jack:
The best way to fix your issue is to put the files into an album and name that album the way you would want the basic file name to be. Then export those photos from the album using the File->Export->File Export menu route and select the option to "Use album name". The exported files will be titled "album name-01.jpg", "album name-02.jpg", etc. This will maintain their order. if you export more than 99 at a time, the files will not be ordered properly in the list view as they don't have two zeros before numbers 1-9 and one zero before numbers 10-99.
Do you Twango?
MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.10) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

Similar Messages

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

Restore Back-Up from Lacie External Drive

Hi
Could someone please explain to me (as easy and detailed as possible - I am not computer expert =) how to proceed to erase my HD (wth Leopard) and restore it with the back-up currently on my Lacie Drive.
Thank you so much. Dominique

Joel C. wrote:
Exactly how did you backup your system to the Lacie drive? Did you clone the system using something like Carbon Copy Cloner or SuperDuper? Or are they just files one the HD?
I have a LaCie drive and created a bootable clone using LaCie's free software, SilverKeeper 1.1.4
It makes a perfect bootable clone which I have booted into and even ran as an external drive. It also appears to have included my Vista install in the clone.
I used the 800 MHz FW port and it took about 1/2 hour to backup 60 Gigs.

I have an issue with time machine, it doesn't find the Lacie external driver it use to use. it is the same drive that I usaly use for time machine back ups. It is corectly plugged. What can I do ?

Hi,
I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month.
Today, the Lacie driver is pluged and running, but the computer just does'nt find it.
what shall I do ?

Some things to consider:
Is the drive mounted, i.e., visible via Finder and/or on the Desktop?
Is the drive still selected in System Preferences, Time Machine? If not, use the "Select Disk" button.
Is Time Machine still turned on (System Preferences, Time Machine)?
Can you see the drive (and mount it) using Disk Utility (in your Utilities folder)?
charlie

Lacie external drive time machine error

I'm using my Lacie external drive (2TB) for my time machine. And it has this problem that every time after I put my macbook to sleep, the time machine won't work, it keeps showing this message "error occurred during back up" (but it doesn't not specify what kind of error). And the time machine can't recognize the history backup from the drive.
However, it will function again if I eject the drive and replug it in.
It's not a major problem, but it's kinda annoying and I wanna know what's causing it.
Thanks yall.

Hi George,
The one way I found to get the TM back on the rail is to access my back up disk from finder, choose the sparse disk image. Hit cmmd-delete and banish it.
Start over again. Be sure to be connected by a wired connection as on a wireless network it will take a while. But I guess you have the HD attached via firewire or usb so it should not be a major issue.

Fix for Mavericks compatibility with Lacie external drives yet?

My last attempt to upgrade to Mavericks caused my 2 Lacie external drives to become unrecognisable to my mac. Update hung up too so I lost everything...luckily I had a third back up with CCC that saved me. Im just wondering if there is a fix for this now. I got no information or help from Lacie.

Exactly the same here. Installed Mavericks and La Cie no longer shows in Finder and Time Machine reminds me that no back up has taken place. As an iMac newbie where do I go from here. In my Win PC days I always backed up to an external HD on a scheduled basis without this sort of problem.

How can i access my lacie external drive with os mountain lion

I have just upgradet my macbook pro from snow leopard to mountain lion, and now i can't restore my backed up files from my Lacie external drive.
When i try to connect to it through time machine or migration assistant i get the message:
"the version of the server you are trying to connect to is not supported"
I have tried to enable all UAMs but i still can't connect.
I have browsed after other similar situations, but i can't seem to find any though i'm hardly the only one with this problem.

If the backup was made using time machine, you should be able to access any files you need or want manually using the finder. It may not be pretty, but it should work. I don't know why the migration assistant would be unable to access it though.
If you can't access the contents of the backup with the finder, then I would say your problem is a bit more serious.

HT3275 Lacie external drive/Time Machine errors

I am using Lacie external drive with Time Machine and now have an "invalid node structure." Wants me to back up and restore...again. I have had problems in the past and have restored twice so far. Other problems include "Incorrect number of thread records" and "Invalid directory item count." Why does this keep happening? Is it normal to keep restoring your external hard drive? Where else should I back up my hard drive?

Terriodo wrote:
I wonder if this is a problem with Time Machine or my external hard drive.
Hard to tell, unfortunately. As posted earlier, that can be caused by lots of things.
Our Lacie hard drive is backing up everything that is on our computer. Meaning there isn't anything getting backed up that has been deleted. But it is annoying to erase the darn thing every couple of weeks and load it all on again.
My advice would be to get another drive. Since you have a desktop Mac, get a desktop drive, with it's own power supply. Plug it (and your Mac) into a same good-quality surge suppressor; or, better, U.P.S. (battery backup) system.
It's always prudent to keep secondary backups. See Time Machine - Frequently Asked Question #27 for an explanation and some suggestions.
That recommends using a different app, but in your situation, you might want to use both drives with Time Machine temporarily; you'll have to switch back and forth manually via the TM Preferences panel (Mountain Lion allows multiple destinations, but Snow Leopard doesn't). If the new drive works fine, but the old one doesn't, that will implicate the LaCie, or it's connections, etc.
If you determine it's ok, then use one (probably the desktop) with Time Machine, and the Rugged with another app. Consider taking it off-site, as mentioned in #27.
If it's not ok, replace it.
I am running 10.6.8 and have Lacie 1T Rugged external hard drive connected by firewire on my Mac desktop.
I have a smaller version of that drive, as do several folks here. It gets good reviews, but like any drive, won't last forever. If it's over about 3 years old, it could be starting to develop a problem.

G4 Won't recognize Lacie external drive

My G4 will not display/boot my Lacie external drive. I've used it for several years, so it has worked in the past. We had a power outage and after that it won't regonize the drive. I tested the drive on my Mac laptop and the drive works fine, just not on my G4. It powers up when I plug it into a G4 firewire port, but won't dsiplay/mount on the desktop. I tried rebooting everything and unplugging all other USB and Firewires from the back. No use. Any suggestions? Thanks.

Hello! Try hooking it up to the book and repairing the drive in disk utility. Then dismount it and unhook it and turn off it's power. Then reconnect it to the G4 and then power it on. Sometimes this will get it to mount. There have been some LaCie's that have had problems with a weak power supply. Tom

LaCie external drive data recovery in 10.5?

I purchased my iMac on Sunday. My 500GB LaCie Big Disk Extreme mounted in OSX v10.5 with no problems.
I was running 10.3.9 prior to Sunday, so I checked for updates to various applications, and found LaCie's Update Tool, Ver. 1.4.2.
Just as the 1.4.2 update was finishing, I received an 'unable to update firmware' message, and the drive has not mounted since. It shows up in both Disk Utility and System Profiler, but DU will not allow me to Verify or Repair. I moved the LaCie back to my old G4, and it would not mount there either.
I spoke to Apple Care this morning as well as LaCie's tech support. Both assumptions are that my LaCie external drive is corrupted, and in need of data recovery.
Apart from being bummed, I am confused by the yes/no postings for Disk Warrior and other such data recovery programs, in relation to 10.5 compatibility.
Any suggestions at this point would be welcome, as I'm lost without them.

It seemed to work for a little while. Under the CBR folder, there were 61 separate files of JPEG images alone. The first dozen or so seemed to come through alright, then I saw nothing but striated and partial (like 10% visible) images after that, no matter which of the JPEG folders I downloaded from.
I also tried to pick individual image files at random from any of the folders (both the CBR subfolders and the LaCie BigDisk Extreme Media subfolders) and everything I tried was mush. I utilized the recommended Allocation Blocks Layout settings (I have 7 settings available after my scan), and downloaded the same image 7 times with no success. One of the settings would give me a highly distorted image, and the other 6 came up unable to be opened.
I'm appreciating the encouragement here. I don't feel like giving up and walking away from this without a fight. I'm not wealthy, but I'm willing to spend some bucks to see this resolved without loss.
Any suggestions on data retrieval services?
I'm sorry to seem reliant, because I'm not well-versed with these things, but it's because I'm proud to say that I never had one single issue with my G4 over the course of five years of daily use.

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

HT201250 Can I use Time Machine on two different Macs to back up to one external drive?

Can I use Time Machine on two different Macs to back up to one external drive?
I have one 1T Western Digital backup drive that works well with Time Machine and my MacBook Pro. I now want to back up my wife's MacBook Air using Time Machine on her Mac and want to know if I can use the same WD external drive or if I need to get a 2nd back up drive? If I can use one external drive for the two Macs do I need to do something special on the drive or will Time Machine do it automatically?

Yes. You will need to configure Time Machine preferences on each computer to backup to the same drive. Note that you cannot connect the backup drive to both machines at the same time.

How do I move a back up to another external drive and how does the Mac Book then find the new back up?

how do I move a back up to another external drive and how does the Mac Book then find the new back up?
I currently have the back up on a Time Capsule, I want to move it from the Time Capsule to another external hard drive.

Did you read the link to the Pondidni website? You will have to select the Time Machine HDD for the new MBP and the old one in System Preferences>Time Machine:
Ciao.

Macbook no longer recognizes my lacie external drive

My macbook no longer recognizes my lacie external drive.

Use a data recovery product such as the ones listed here, and then get a replacement drive.
(110354)

Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.

Use migration assistant to move your files. http://support.apple.com/kb/HT4889

Back-up to Lacie external drive

Similar Messages

Maybe you are looking for