'Backend systems with Release 701 are not supported'

while BBPGETVD transaction is run below error is seen,
'Backend systems with Release 701 are not supported'
Please help to resolve it.

Hi
What is your backend system ECC version?
What is the configuaration in Define back end system?
Note 1313972 - BBPGETVD: Backend system latest release not supported
br
muthu

Similar Messages

Backend System with Release 701 are not supported

SRM 5.0
Extended Classic Scenario
CCM 2.0
When updating the vendors in SRM system using TC - BBPUPDVD getting the below error message :-
Backend System with Release 701 are not supported
Have checked in table - BBP_BACKEND_DEST, the backend entry is properly maintained.
Can any one advice.
Regards,
Jayoti
Edited by: SAP jayoti on Dec 7, 2010 1:11 PM

The problem is resolved for vendor relication after applying the below notes 1313972 and 1372175.
ECC sandbox seems to be in 701 release. When the backend system ECC is in release 701, vendor replication fails with the error message that 'Backend system release 701 not supported'. We need to apply notes 1313972 and 1372175 to fix this issue. I have applied them in Sandbox and the issue is resolved now.

"Backend systems with Release 701 are not supported " - ECC 6.0 to SRM 5.0

Hi ,
I have 2 doubts .
1. We are getting Error "Backend systems with Release 701 are not supported " while replicating vendors from ECC 6.0 backend system to SRM 5.0 system.
There are some notes on simillar topic but are not for SRM 5.0 ,suggested on SDN. an anyone please suggest what need to be done for the same.
2. Can we replicate Vendor Master Data with Contact Person from SRM to ECC system ? if yes, How ?
Regards
Narendra

answer 1:-
Note 1372175 - BBP_VENDOR_GET_DATA_JOB "Back-End Systems Not Supported"
On recent upgrade of the ECC back-end system to release '701' the program BBP_VENDOR_GET_DATA_JOB is getting errored out. If you are using SRM 5.0 , SRM_SERVER 550 with ECC backend Release 701 you encounter the above reported problem
Other terms
Vendor Replication Job, Release 701, Backend not supported, BBP_VENDOR_GET_DATA_JOB
Reason and Prerequisites
The program does not consider the release 701
remote_release EQ '700' OR remote_release EQ '701'.
OR
bbp_vendor_get_data - DEBUG what ois the remote_release 700 or 701?
Muhtu

BBPGETVD throwing an error -Backend system with release 701 are not support

Experts,
After changing the Backend connection from R3 4.6c to ECC6 sysem in our BBPCRM4.0,
the transaction "BBPGETVD" is not working, which is throwing an error as
"Backend system with release 701 are not supported".
Already we have applied some of the notes (822883 &862290)
Thanks
Ahamed

Are you able to replicate other data like plants, product categories from the same backend system or are you facing the same error?
Also please check the logical system and see if they are assigned to the client correctly. (in SPRO settings)
Thanks,
Prashanth

BBPGETVD - error:backend systems with release 700 are not supported

Hi,
When I am trying to replicate vendor data from EEC to crm 4.0 via BBPGETVD.
I get the error message"backend systems with release 700 are not supported"
Is anyone have Idea what is wrong? and how can fix it?
Thanks,
Rachel

Yossi,
I believe that standard transaction does not work with ECC 6.0. The standard response would be to upgrade your CRM system to 5.0 so that you can download vendors from ECC 6.0.
Bascially the vendor replication programs in CRM below 5.0 aren't really that reliable for delta downloads(one error will cause an entire load to fail). So you probably at best should copy the SAP standards to generate custom load programs as a starting point.
It is not too difficult and overcomes some of the restrictions that SAP puts in place(i.e. you can only use one number range for vendors downloaded, etc.). This is definitely one of the weak points of CRM 4.0 that was fixed in CRM 5.0.
If you have more questions on this let me know.
Take care,
Stephen

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server?

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

SapEHP Installer - ERROR: Release '701' is not supported by this tool!

Hi gurus, I am trying to do a EHP4 upgrade using the EHPI. I am using the latest EHPI 710. The moment i enter the KEYword and Download directory it go through and then come up with an error message "701 is not supported by this tool". Please help me solve this issue.

Hi Ram,
1) You are using wrong EHPI , you need to use SAP EHPI 700 version . The EHPI 710 to upgrade SAP NW 710 system to EHP1 i.e to 711
My Company's Application Components" SAP EHP INSTALLER" SAP EHP INSTALLER 7.00
2) You need to generate .xml file from SAP Solution Manager by seleting required ECC usagae types. SAP EHPI will ask for .xml file in future steps.
Regards,
Preethish

URLs with type nwnode are not supported

I recently purchased a new macbook air it came with mac os x 10.8.3, let me first advise i am a first-time mac user but am an IT professional with about 15 years of experience so i have made an attempt to research and resolve this issue prior to posting. My goal was to find an application other than itunes i could use to add music to my iphone as i use several computers throughout the day using itunes would not be an option. My problem is all of the apps which i've found, freesync being the last and what i was told best to use are generating the below error. After acknowledging the alert freesync still does not recognize my iphone (4s btw IOS 6.1.2) once connected, itunes does however. From what i've read the OS installed on the laptop is compatible so my next guess is the IOS isn't supported? I found a few posts online regarding the error and the fix identified references a folder titled "URLMount (From old Mac)" which i don't have obviously as this wasn't an upgrade but rather a fresh install. Any help would be greatly appreciated, i'm loving my first apple laptop just ***** i can't put music on my phone using it.

This issue is caused by one of the third-party applications you installed. I have no way of knowing which one, but some that have been reported to cause it include DropBox, Path Finder, CloudMe, and perhaps others.

I have a Network notification pop-up every ten minutes they says "There was a problem conecting to server. URLS with type "file;" are not supported". How do I get this to go away?

Ever since I updated my software to Mountain Lion, I've been getting the attached pop-up every 10 Minutes. It's really slowing down my web-browsing and super annoying... How do I get it to go away?

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

I keep getting an error message there was a problem connecting to server. URLs with the type "file" are not supported

I keep getting an error messahe that says
There was a problem connecting to the server. URLs with type "file" are not supported
Any ideas?

Actually, in my case, turning off Time Machine didn't work. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even, gettting it recognized by a different machine first) somehow worked some magic.

Generics are not supported

Using Java Studio Enterprise 8.1.
1. Have following code inside class MPoll.java:
public class MPoll {
private Vector<MQuestion> q;
line selected in IDE as wrong with message: "generics are not supported in -source 1.4 (try -source 1.5 to enable generics)
2.
private MQuestion questions[];
Following code throws NullPoinetrException:
MQuestion x = new MQuestion();
int i = 0;
questions(i) = x; // Exception here
3. Following code throws NullPointerException too:
questions(i) = new MQuestion(); //Exception here
object x created correctly.
The task is to create analog of C++ vector<MQuestion>...
( == [
) == ]
Message was edited by:
BrotherFlame

1. So change your compiler settings accordingly. How to do that would be written in the manual or help, or can be asked at the forums here: http://forum.java.sun.com/index.jspa?tab=devtools
2. questions(i) = x; is no valid code.
3. questions(i) = new MQuestion(); //Exception here
is no valid code either.
Neither would throw an NPE. Please post the real code, formatted.
http://forum.java.sun.com/help.jspa?sec=formatting

"There was a problem connecting to the server. URLs with the type "file:" are not supported. Why? What can be done to eliminate it?

After upgrading to Mountain Lion, I repeatedly get this message: "There was a problem connecting to the server. URLs with the type "file:" are not supported.
Why?
What can be done to eliminate it?

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Message - There was a problem connecting to the server. URLs with the type "file:" are not supported

new macbook pro receving this message: There was a problem connecting to the server. URLs with the type "file:" are not supported. What is causing this and how do

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

There was a problem connecting to the server. URLs with the type "file:" are not supported. OK

I have just upgraded to Mountain Lion from Leopard, but now I keep getting this message when I open some web-pages and every time I wake the Mac up after going to sleep. For some odd reason I get it in Swedish sometimes (installed language) and some times in English...
There was a problem connecting to the server.
URLs with the type "file:" are not supported.
OK
What is this and how can I get rid of it. I use Firefox and have updated to latest version.

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Opportunities are not supported with SAP Business One 2005A SP0 and SP1??

In SBO Note 973962 says that opportunities are not supported with 2005A sp0 and SP1.
When running 5.9.7 I can sync opportunities.
So does anyone know what is and what is not supported in this version for Opportunities?
Thanks,
Eric Rasenberg

Full functionality is not shared nor synchronized between systems for opportunities in 5.9.x

'Backend systems with Release 701 are not supported'

Similar Messages

Maybe you are looking for