Background job getting failed every day

Hi,
This background job getting failed every day.But this job was running fine initial periord.Please help me out this issue.
SAP_REORG_UPDATERECORDS
SAP_WP_CACHE_RELOAD_FULL
SLCA_LCK_SYNCHOWNERS
Regards
Naanas.

If this is R/3, then none of the above jobs should exist in the system, if scheduled by default with other standard jobs, then these should be removed
Note 1034532 - Changes for standard jobs
Note 931436 - SLCA_LCK_SYNCHOWNERS standard job terminates

Similar Messages

SM:SELFDIAGNOSIS background job getting failed in Solution manager

Hi All,
SM:SELFDIAGNOSIS background job getting failed in Solution manger server :
Job Log:
2-22-2012 16:44:02 Job started                                                                                00           516          S
2-22-2012 16:44:02 Step 001 started (program RDSWP_SELF_DIAGNOSIS, variant &0000000000324, user ID BASISUSER)      00           550          S
2-22-2012 16:45:07 Internal session terminated with a runtime error (see ST22)                                     00           671          A
2-22-2012 16:45:07 Job cancelled                                                                                00           518          A
ST22: Dump:
Runtime Errors         ITAB_DUPLICATE_KEY
Date and Time          02-22-2012 16:45:07
Short text
A row with the same key already exists.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An entry was to be entered into the table
"\CLASS=CL_DSWP_SD_DIAGNOSE_CONSISTENT\METHOD=CHECK_USERS_BP\DATA=LT_USCP"
(which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ITAB_DUPLICATE_KEY" " "
"CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" or "CL_DSWP_SD_DIAGNOSE_CONSISTENTCM00M"
"CHECK_USERS_BP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
KIndly Suggest to resolve the above issue
Thanks
Nekkalapu

HI,
Deatils:
SAP EHP 1 for SAP Solution Manager 7.0
SAP_ABA                701          0006    SAPKA70106
SAP_BASIS              701          0006    SAPKB70106
PI_BASIS               701          0006    SAPK-70106INPIBASI
ST-PI                  2008_1_700   0002    SAPKITLRD2
CRMUIF                 500          0004    SAPK-50004INCRMUIF
SAP_BW                 701          0006    SAPKW70106
SAP_AP                 700          0019    SAPKNA7019
BBPCRM                 500          0016    SAPKU50016
BI_CONT                704          0007    SAPK-70407INBICONT
CPRXRPM                400          0016    SAPK-40016INCPRXRP
ST                     400          0024    SAPKITL434
ST-A/PI                01M_CRM570   0000         -
ST-ICO                 150_700      0009    SAPK-15079INSTPL
ST-SER                 701_2010_1   0002    SAPKITLOS2
Thanks
Nekkalapu

Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

Good day Sidharth Namrta,
It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
iPhone: Troubleshooting issues making or receiving calls
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Speed getting lower every day since adsl2+ upgrade

Background : My router has always from day 1 been switched off at 11pm at night and turned back on at 7am in the morning. With adsl max I consistently had a download speed of 850Kb/s
2 weeks ago my line was upgraded after a phone call to BT, initially everything was great, speeds were not much better for the first coupld of days (950Kb/s) but then shot up to 1250Kb/s for a few days. Since then however my line has been getting slower every day. Today is the worst and I am now getting 690Kb/s.
I know I'm going to get the usual "leave router connected for 3 day" answer of someone, but what does this achieve ? If my line says connected at 6.5Mbps and I leave it on for 3 days solid does that mean 3 days of being stuck at that speed or does the line recalculate connection speed at certain intervals ?
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:18:41
Downstream:
6.5 Mbps
Upstream:
1.11 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.3 dB / 6.0 dB
Line attenuation (Down/Up):
28.6 dB / 17.8 dB
Output power (Down/Up):
19.1 dBm / 12.4 dBm
FEC Events (Down/Up):
181278 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
0 / 0
Thats my line stats as it stands , down from 11Mbps connection a week ago . Cannot connect to the main socket as where the line comes in the house is just a blank faceplate with a cable coming out the bottom into a smaller box then out and accross the room to the only phone socket in the property.
At this rate I would have been better staying on my old package instead of being made to take out a new contract at less favourable terms.

Nothing but a phone connected to the line. The sky box has never been connected to the line as last year when we got a Sky HD box slowed the connection right down.
As for the router being on for the 10 days, no one ever said that to me. The only reason I know that turning it off daily could be a negative was through this forum.
As for my original question. If I now leave the router on permanately does it reconfigure the connection istelf or does it have to be reset every now and then. Very frustrating going from 850Kb/s on adslmax to 1200+ then down to sub 700.
I am unable to run a speed test at the moment , but with only the homehub connected to the master socket the results look like much the same , The hub seems to be connecting at bang on 6.5Mbs every time so I assume the line has been set to this by the DLM ? How long on ADSL 2 does it take to work its way back up ? I ran a speed test earlier today and I belive my IP profile was 5.85 or some such , why would it be set so low when the line was happy at 10+ last week ?
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:03:17
Downstream:
6.5 Mbps
Upstream:
1.106 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
Unknown or no mode configured
Latency type:
Interleaved
Noise margin (Down/Up):
9.9 dB / 5.9 dB
Line attenuation (Down/Up):
27.9 dB / 17.3 dB
Output power (Down/Up):
18.3 dBm / 12.4 dBm
FEC Events (Down/Up):
61 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
0 / 0

Apple ID password failing every day

This is getting very frustrating, but the password on my Apple ID is failing every day, sometimes more than once a day. I reset it on every device, and it works for a couple hours, then I have to reset it. Not difficult, but it is a pain. This has been going on for months. Any suggestions?

Are you logged into your account in Settings/Store?

SM:EXEC SERVICES job getting failed in Solution manager

HI All,
SM:EXEC SERVICES job getting failed in solution mnager and job log will be fowlloing:
01-31-2012 19:09:21 Job started
01-31-2012 19:09:21 Step 001 started (program RDSMOPBACK_AUTOSESSIONS_ALL, variant , user ID BASISUSER)
01-31-2012 19:09:21 MemSize Begin = 796480 Bytes
01-31-2012 19:09:21 *******************************
01-31-2012 19:09:21 MemSize Begin = 1919120 Bytes
01-31-2012 19:09:23 Solution <000000106120000> "SID..." is being edited (Operations)
01-31-2012 19:09:23 <000000106120000> "SID..."(Operations)
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 0 bytes
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 690 us time
01-31-2012 19:09:23 Trying to perform session EC2000000001313
01-31-2012 19:09:24 MODEL_KEY: SID Installation Number: 6 MODEL_MODE: E MODEL_VERSNR 00001 MODEL_CLASS: EWA Data Model
01-31-2012 19:09:30 Definition nicht vorhanden
01-31-2012 19:09:33 Definition nicht vorhanden
01-31-2012 19:09:45 Internal session terminated with a runtime error (see ST22)
01-31-2012 19:09:45 Job cancelled
St22 Dump:
The exception 'CX_DSVAS_API_CONTEXT_INSTANCE' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLDSVAS_PROC' has to be
terminated.
Please suggest how to proceed further and provide your valuble inputs
Thanks
Nekkalapu

HI Siva,
I have done the changes according the note but still same problem.
Please suggest any other ways to resolve this issue .
Advance thanks
Regards
Nekkalapu

Having trouble with momentary delays while scrolling and typing, new problem that seems to be getting worse every day. Mouse?

Having trouble with momentary delays while scrolling and typing. It's a new problem that seems to be getting worse every day. Mouse? Internet connection? It's driving me nuts!

Hi
Did you find a solution ?
I have the same problem on my iPhone 4

WRT54GS fails every day 16:30

Greetings,
At my office for the past two weeks, the wireless connection has failed every day at the same time: 4:30pm. I have bypassed the router completely and am able to connect to the internet via cable connection during that time. The modem shows no interruption.
I'm not sure what my next troubleshooting steps would be...any words of advice?
Cheers!

Maybe you changed your router settings(Access Restriction or so)...Just reset the router to factory defaults...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Also disable any firewalls, security softwares on the computer before trying to access the setup page...

An old report gets reprinted every day

Hello all,
We have an application that based on Oracle Reports and Forms.
Now, one of the old reports, originally printed 6 months ago, gets reprinted every day.
We don't have any ideas why. No one on purpose does it
I was wondering if any of you have experienced the same issue.
Thank you, Sonya

By report you very likely mean report output, or report result?
If so, looks like the report has been scheduled to run every day, and the start date was set 6 month ahead. Someone's error, or something. See your application manual on how to schedule / unschedule / view scheduled reports.

Since downloading firefox my computer has been getting infected every day

Have had this laptop since December 2010. Never had any problem with infiltrations. Everyone said Firefox was better than Internet Explorer. Don't know if it is a coincidence but since I started using Firefox, my computer has been getting infected every day. Have ESET Smart Security 4 and it will clean some of the files but shows error when cleaning others. Is there something I can do?

''C:\ProgramData\Java\VerifierNotifier.dll and the threat says a variant of Win32/Kryptik.TGTtrojan (two of these) and one C:\Users\All Users\JavaVerifierNotifier.dll and a variant of Win32Kryptik.TGT.trojan''
I'm not familiar with those. Can you try a supplemental scanner/cleaner for a second opinion and possible better luck with removal? These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

Satellite A500 getting hot every day

Hi,
my Satellite A500 getting hot every day and shut down every second day.
Where is the vault and what can i do?
Greeting
Schaumi

Hi
Try to clean the cooling ventilators using a compressed air spray.
Dust and debris inside the fans might prevent the air from circulation which leads to higher temperature.
You should also use the Toshiba graphic card drivers instead of any other drivers from any 3rd party pages. The drivers from Toshiba page contains an GPU overheating protection which other drivers dont.

IMac freezes every few seconds. Dock won't appear. Other wierd glitches. Getting worse every day. ***?

iMac freezes every few seconds. Dock won't appear. Other wierd glitches. Getting worse every day. ***?

Hello
Check out the troubleshooting articles below to resolve issues with your Mac freezing on you. You may need to resintall Mac OS X Lion.
OS X Lion: If your Mac runs slowly
http://support.apple.com/kb/PH3915
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
OS X Lion: Reinstall Mac OS X
http://support.apple.com/kb/PH3878
Regards,
-Norm G.

Background job getting CANCELLED

hello,
i have a background job scheduled for a report program.it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
You attempted to change, delete or create a line in the
internal table "???", but no valid cursor exists
for the table.
Possible reasons:
1. The relevent ABAP/4 statement does not include the addition
   "...INDEX...", although the statement is not
   inside a "LOOP...ENDLOOP" loop processing this table.
2. The relevent ABAP/4 statement was called from within a
   "LOOP...ENDLOOP" loop after a DELETE "???".
what could be the reason?

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

BATCH JOB GETTING FAILED DUE TO WARNING MESSAGE

Hi,
Our background job is getting failed if we are having warning meesage , why it is happening , could any one provide inputs .
In bacground it's considering Warning message as Error message .

Hi Garima,
CHange the code as follows:
if sy-batch = 'X'.
Message 'Error updating data !' type 'I'.
else.
Message 'Error updating data !' type 'W'.
endif.
i..e When executed in bckground display INFORMATION Message & in Foreground display WARNING message.
Best regards,
Prashant

DB13 Jobs getting failed

Hi Basis Gurus,
In our Development BW 3.5 system the DB13 jobs (Check DB and updatestats) are getting failed since 15 days.
In DB13 when i clicked on the Check DB and updatestats the system is prompting message as "No action log is found for this action"
Please let me know how can i troubleshoot this issue.
Please help me.
Our is Qulality BW 3.5 system, Solaris OS and Oracle 9i database.
Regards,
Anil.

Hi Alok,
Thanks for your support
I could search the jobs by giving the criteria as
Job name : DBA*
Use name : *
DBA:UPDATESTATS_____@210000/4007 D256979 Canceled
DBA:CHECKDB_________@190000/4007 D256979 Canceled
Like the above jobs there are some other jobs of the same name as above which got canceled from 03/01/2009 to till date.
When i clicked on the jobs logs the system is prompting a message as "No job log entries are available for the selected job"
Also i checked the user name with su01 and it is existing.
Please help me
Regards,
Anil.

Background job getting failed every day

Similar Messages

Maybe you are looking for