Backup and restoration of weblogic server (alongwith its domain)

Hello Everyone,
I want to change node 1 hardware due to some technical issues. Currently im using weblogic 10.3.6 with Oracle forms and Reports 11gR2 (only forms reports on HA) on Windows Server 2008 R2
After changing hardware im planning to use the same OS / architecture.
What should i consider for this activity other than;
1. registry key for Oracle(weblogic or forms if any)
2. Bea home
3. Middleware backup with copy/xcopy
Any help is appreciable.
Regards
Samad Ul Haq

Hi everyone,
Just gonna close the topic after sharing some details in case of Windows environment.
1. Shut down all the application components
2. Take the cold backup of middleware_home fully
3. Take backup of registry.
4. Take Backup of BEAHOME in C:drive
After fresh OS on same machine, do format your OLD DRIVE D/E/F/G , afterwards paste the backup again any in the old (same) path.
Regards
Samad Ul Haq

Similar Messages

Enable, backup and restore FCSvr in command line

Hi All,
Anyone know how to enable, backup and restore Final Cut Server in command line?
Thanks,
Spin

First delete the /var/db/FinalCutServer/ folder and ran the Final Cut Server.dmg file to reinstall.
Next grab your most recent backup and moved the "-" file to the desktop (this contains the database restoration script).
Open up a command window and execute the following commands:
cd "/Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/"
./fcsvr_run psql px pxdb
From the psql command prompt execute this command, substituting the path to your "-" database script:
\i /Users/finalcutserver/Desktop/-
After that finished executing I was able to start Final Cut Server and so far it looks as though everything has been restored! Fingers crossed...

Backup and restore open directory 10.7

Hello,
Since i upgrade my xserve from 10.6.8 to 10.7 Lion, i get error on accessing the WGM with the diradmin account. I always get the messdage 'the password is incorrect'
I've done lot of actions. So i Decide to backup and restore my OD. I need help for this as i am new comming on mac os environnement.
The problem, i've full backup of the system prior the migration, not the specific OD backup

Hi activenew,
To recover from one of these problems, you can restore the Microsoft Windows operating system from a system state backup. You can restore a system state backup to the same
physical computer from which the system state backup was created, or to a different physical computer that has the same make, model, and configuration (identical hardware).
However, we do not support restoring a system state backup from one computer to a second computer of a different make, model, or hardware configuration. We only provide commercially
reasonable efforts to support this process. Even if the source and destination computers seem to be identical makes and models, the source computers may have different drivers, hardware, or firmware than the destination computers.
The related KB:
How to restore a Windows installation or move it to different hardware
http://support.microsoft.com/kb/249694/EN-US
There have an example AD backup and restore article you can refer first.
Active Directory Backup and Restore in Windows Server 2008
http://technet.microsoft.com/en-us/magazine/2008.05.adbackup.aspx
More information:
Useful shelf life of a system-state backup of Active Directory
http://support.microsoft.com/kb/216993
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Exchange Server 2013 backup and restoration question

Good afternoon
I am wondering if I can pick people's brains here if that's not too much trouble.
I have recently implemented an Exchange 2013 environment with 3 servers (two multi-role CAS & MBX physical machines, and one further virtual CAS server). Everything is working correctly and mail-flow is fine. My question relates to backup and restoration
procedures. I am running a single Database Availability group with the two multi-role servers members of the this group and I have one Mailbox Database on the DAG, passive on one member and active on the other. Failover has been tested and this is functioning
as expected.
The backup environment I have implemented is as follows. I have utilized a separate Microsoft DPM 2012 server that runs a nightly Bare Metal backup on both multi-role servers with a retention range of 14 days and I have protected the DAG using DPM with a
nightly full-express backup and 4 hourly syncs on one of the multi-role servers. Furthermore the Mailbox Database is protected, again nightly with a copy-backup.
I am confident I know what to do should the mailbox database become corrupted or lost or need to be restored for one reason or another (it would just be a case of restoring the backed up mailbox database using DPM to a pre-created recovery database), what
I am not quite so sure on is what I would do should I lose one or both of the multi-role CAS and MBX servers (the third CAS I am not so worried about as it is not used for incoming mail flow from the internet and we really only use it for ECP as we did not
want to expose this to the internet). I wonder what process should follow to restore my Exchange servers (I know how to perform the Bare Metal recoveries using WSB) and what configuration would be required after restoring the Bare Metal backups.
I know this is a reasonably long question but if anyone has any advice for me I would appreciate it greatly in the unlikely event something goes horribly wrong with my Exchange environment.
Thanks in advance

Hi,
Yes, Most of the configuration settings are stored in AD. Mail data and personal related data are store in Mailbox DB. We just need to take consideration of these two points.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Backup and restore OS X 10.3.x server

I'm looking for suggestions for both backup and restore software/hardware for my OS X 10.3.9 server. I am running a lab of 28 iMacs running OS 9.2.2 with Mac Manager 2.2
Thanks in advance,
Mel

Mel,
We use Retrospect and backup to tape and hard drive. This is for user files. If you want you could use Carbon Copy Cloner (www.bombich.com)to baxck up the server or certain user files.
10.3.9 xserves (2)
10.2.8, 10.3.9 and 10.4.4 clients (400)
2000 users

Backup and Restore in Server 10.3

Hello all,
Server 10.3.9
Mac G4 Tower
In Workgroup Manager, if I highlight all the users, and select FILE > EXPORT I get the following message:
http://homepage.mac.com/lintila/export.png
It says I should use Backup and Restore, but I can not find these functions anywhere...
I need to reinstall my server, and I want to back up the users... How can I do this?
Thanks
Andy

Does this page contain anything useful?
(15233)

Backup and restore problem

Hi this is Sreenu, we are trying to do backup and restore process we are getting this exception in the Ejb bean, can any one help regard this
Here i am sending the exception.(this is giving at backup time)
" Aug 31 03:02:22 xxxxxxx sendmail[17868]: [ID 702911 mail.alert] unable to qualify my own domain name (xxxxxx) -- using short nameL :: Bean created HEMIL :: IN constructor HEMIL :: HOME INTF OBTAINEDHEMIL :: err string is PlatformInfoUtility
is unable to initialize its private variables. Exception is: java.rmi.ServerException: RemoteException occurred in serve
r thread; nested exception is:
java.rmi.AccessException: SecurityException; nested exception is:
java.lang.SecurityException: Authentication exception, principal=null"
regards,
Sreenu

Hi Fred,
The answer is the same as to your other problem. bak2db assumes that the server is not running.
Bertold

Backup and Restore VM

I have a host server that has a C: drive and a D: drive. Right now I only have one VM running and it is located on the D: drive. I need to reformat the disk that the D: drive is on. For some reason it was created as a MBR type disk and I
need to delete it and recreate it as a GPT disk so that I can extend the D: partition beyond 2TB. So, what is the best way to backup and restore the existing VM in this case?

I'm not really sure what you are referring to as an import/export but I'm going to assume its something along the lines of copying the data to 1 drive, then copying the data back to another drive. Doing a file based backup and recovery would do the same
thing. I don't particularly like doing stuff like copy and pastes to move data (especially important data) bc there is no guarantee copy and paste actually copied everything (no logging of what it actually did) and there are alot of things that can happen
during the copy (disk latency, network latency) that may cause data to be lost (delayed write failures). With any good backup program you should be able to run a report for what files it actually backed up and what files failed to backup and the reason
they failed to back up. Same applies to restores. Also I have seen issues where a simple copy and paste strips certain special attributes from the file.
If file based backup/restore is not an option, then maybe a robocopy of the data would be the best solution. I'm pretty sure using /b /copyall api should get everything as well. And you can add a /v switch to it to get some logging.

Solaris9 Backup and restore

Hi
I want to backup the entire file systems of Solaris9 server to a single tape. I also want to restore it when its is required.
The backup drive is connected to a remote machine and proper access is there.
Which is the best way ie., ufsdump, cpio,......... to do this and what is the exact syntax to do backup and restore.
Thanks in advance
Ashraf.

Perhaps you might monitor this other discussion thread from the Solaris 9 forum:
http://swforum.sun.com/jive/thread.jspa?threadID=94883&tstart=0
It is still a work-in-progress, with no final resolution.

OIM backup and restore steps

Hi All,
I have installed OIM 9.1.0 with jboss 4.0.3 SP1 its working fine. Now I want to try backup and restore of OIM. Please let me now the steps.
Thanks in advance.

generally OIM backup is taken at database level where OIM schema resides.This is OIM server database backup.
The syntax for backup looks something like
C:\> exp username/password@SID file = <drivename>:\filename.dmp owner=oimusername
where username and owner is the username of OIM database schema. For restore replace imp in place of exp.
you can also take backup of OIM webapp which resides in appserver deployment folder. This backup is useful when you are doing any customization in OIM and if something goes wrong you can restore with original.
thanks
Edited by: P.K on Jun 29, 2010 7:10 AM

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

Ideas for Providing User Level Data Backup and Restore

I'm looking for ideas for implementing a user level application data backup and restore in an Apex app.
What would be great is to have a user be provided an export file and a way to import this file. A bit overkill but hopefully never needed.
Another option that is perfectly doable is a report that simply provides a means to create an export of the data. Since I already have an interface I can use an export to interface an export.
Any thoughts?
Hopefully I'm missing something already there for an end user to use.

jlincoln wrote:
"Do you mean "export" and "import" colloquially, or in the specific sense of the exp/imp/datapump utilities?"': I mean as in imp/exp Oracle utilities. Generally speaking, it would be neat to be able to export and import via an Apex an application. In this hosted environment I don't have that access but would this be a bad idea if you don't care about the existing data in the schema in which the data resides?I can envisage a mechanism using <tt>exp/imp</tt>, but since it requires <tt>dbms_scheduler</tt> external jobs and access to the file system it's highly unlikely to be possible in a hosted environment. (Unless you're doing the hosting?)
Backup: Necessary for piece of mind and flexibility. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group.
Restore: Like I said. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group. This is a very small data set. A restore would simply remove existing data and replace it with the new data.My opinion is that time would be better spent working on the user rather than a redundant backup and restore feature. Involve them in a disaster recovery exercise with whoever is hosting the environment to prove that their data is safe. Normally the inclusion of data in regular, effective database backups is sold as a major feature of APEX solutions.
"What about security/privacy when this data ends up in uncontrolled environments?": I don't understand the point of this question. The data should not end up in uncontrolled environments. Just like the data in the database or its backups.Again, having data in a central, shared location protected by multiple levels of application, database, and OS security is usually seen as a plus for APEX over VB/Access. Exporting the data in toto to a PC/laptop that can be stolen or lost, and where it can be copied to USB drives/phones/email loses this protection.
User Level: Because the end user must have access to the backup and restore mechanisms of the application.
Application Data: The application data. Less than 10MB. Very small. It can be exported in a flat file downloaded by the end user. This file can then be used to upload and import via an existing application interface. For example.
"I'm struggling to parse this for meaning.": When I say I have an existing interface I am referring to a program residing in the Apex application that will take data from a flat table structure (i.e. interface table), validate the data, derive data, and load into the target table structure.Other than the report export capability linked to above, there's nothing built-in to APEX that comes close to your requirement. If the data is simple enough that it can be handled in such a report, and you have a process that can read and recreate this export, then you have your backup/restore capability. If the data can't be handled in a simple report, then you'll need a more complex PL/SQL process to generate the file.

Backup and restoration of weblogic server (alongwith its domain)

Similar Messages

Maybe you are looking for